| Age | Commit message (Collapse) | Author |
|---|
|
For Tegra234 devices, set QSPI0_2X_PM to 199.99 MHz and QSPI0_PM to
99.99 MHz using PLLC as the parent clock. These frequencies enable
Quad IO reads at up to 99.99 MHz, the maximum achievable given PLL
and clock divider limitations. Introduce IOMMU property which is
needed for internal DMA transfers.
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://lore.kernel.org/r/20250506152350.3370291-2-va@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
- Add the missing "ethernet3" alias for the Ethernet TSN port, so
U-Boot will fill its local-mac-address property based on the
"eth3addr" environment variable (if set), avoiding a random MAC
address being assigned by the OS,
- Rename the numerical Ethernet PHY label to "tsn0_phy", to avoid
future conflicts, and for consistency with the "avbN_phy" labels.
Fixes: 3d8e475bd7a724a9 ("arm64: dts: renesas: white-hawk-single: Wire-up Ethernet TSN")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/367f10a18aa196ff1c96734dd9bd5634b312c421.1746624368.git.geert+renesas@glider.be
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
r8a774a1-beacon-rzg2m-kit.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424084748.105255-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The GPT4 IOs are available on the carrier board's PMOD0 connector (J1).
Enable the GPT on the carrier board by adding the GPT pinmux and node on
the carrier board dtsi file.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424054050.28310-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add GPT support by adding pwm node to RZ/V2L SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424054050.28310-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add GPT support by adding pwm node to RZ/G2L SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424054050.28310-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Sparrow Hawk has Headset (CONN3) AUX_IN (CONN4) for Sound input/output
which is using MSIOF. Support it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/87plha2wzr.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/874ixxcg3w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Following commit b956c9de9175 ("arm64: dts: rockchip: rk356x: Move
PCIe MSI to use GIC ITS instead of MBI"), change the PCIe3 controller's
MSI on rk3568 to use ITS, so that all MSI-X can work properly.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250308093008.568437-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the 3.3v and 1.8v regulators that are connected to
the eMMC on the R5 series devices, as well as adding the
eMMC data strobe, and enable eMMC HS200 mode as the
Foresee FEMDNN0xxG-A3A55 modules support it.
Fixes: c8ec73b05a95d ("arm64: dts: rockchip: create common dtsi for NanoPi R5 series")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250506222531.625157-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The manual for the Allwinner A133 SoC mentions that the maximum
supported MMC frequency is 150 MHz, for all of the MMC devices.
Describe that in the DT entry, to help drivers setting the right
interface frequency.
Fixes: fcfbb8d9ec58 ("arm64: allwinner: a100: Add MMC related nodes")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505202416.23753-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
As described in the radxa_rock_3c_v1400_schematic.pdf, the SPI Flash's
VCC connector is connected to VCCIO_FLASH and according to the
that same schematic, that belongs to the VCC_1V8 power source.
This fixes the following warning:
spi-nor spi4.0: supply vcc not found, using dummy regulator
Fixes: ee219017ddb5 ("arm64: dts: rockchip: Add Radxa ROCK 3C")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20250506195702.593044-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Remove the generic UART pinctrl templates from msm8939.dtsi and copy the
definition for the custom UART use cases into the board DT files. This
makes it clear that the set of pins/pull etc are specific to the board and
UART use case.
No functional change.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-6-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Remove the generic UART pinctrl templates from msm8916.dtsi and copy the
definition for the custom UART use cases into the board DT files. This
makes it clear that the set of pins/pull etc are specific to the board and
UART use case.
No functional change.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-5-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Motorola MSM8916-based smartphones all use UART1 with 2 pins (TX, RX)
as debug UART console, so make use of the new &blsp_uart1_console_default
template. This applies the needed bias-pull-up to avoid garbage input,
bootph-all for U-Boot and avoids having to override the UART pins.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-4-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the majority of MSM8916/39-based boards, which use UART2 with 2
pins (TX, RX) for the debug UART console. This adds the needed bias-pull-up
and bootph-all properties to avoid garbage input when UART is disconnected.
apq8016-schneider-hmibsc.dts does not use UART2 as a debug console, so it's
left as-is in this commit.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-3-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
At the moment, msm8916/39.dtsi have two inconsistent UART pinctrl templates
that are used by all the boards:
- &blsp_uart1_default configures all 4 pins (TX, RX, CTS, RTS), some
boards then limit this to just RX and TX
- &blsp_uart2_default only configures 2 pins (TX, RX), even though UART2
also supports CTS/RTS
It's difficult to define a generic pinctrl template for all UART use cases,
since they are quite different in practice. The main use case for most of
the 40+ MSM8916/39-based boards upstream is the UART debug console. The
current generic template is lacking some properties to work properly:
- bias-pull-up for RX: Generally, UART is push-pull and does not need pull
up/down. Both sides drive TX, so RX should never be floating. This is
why the current pinctrl in msm8916/39.dtsi uses bias-disable. However,
this assumes that UART is always connected. For the debug console this
will be rarely the case on mobile devices, only during debugging
sessions. The rest of the time, the RX pin is floating.
This has never caused massive problems, but it's obvious now that this
needs fixing:
(1) In U-Boot, we have been fighting with problems with autoboot for
years. Most of the time, there is a single \0 byte ("break event")
read during boot, which interrupts the autoboot process. I tried to
work around that by inserting some random delay [1], but it turned
out this is also not working reliably on all boards.
What happens is: Since RX is floating, it switches randomly between
high or low. A long low state is interpreted as "break event" (\0).
(2) In postmarketOS, we used to have the "magic SysRq key" enabled by
default for the serial console. We had to disable this at some
point, because there was a small number of users who were reporting
sysrq spam in the kernel log, possibly even crashes/panics
triggered by sysrq.
What likely happened is: SysRq is triggered by sending a "break
event", like in (1). With enough luck, you could even trigger any
of the SysRq actions if the RX pin switches between high and low
(e.g. because of noise introduced by the LTE radio close by).
We can fix this using bias-pull-up, but this may be unneeded,
unexpected, or even unwanted for other UART use cases.
- bootph-all: U-Boot needs to know which pinctrl to apply during early
boot stages, so we should specify "bootph-all" for the console UART
pinctrl. Without bootph-all, the bias-pull-up won't be applied early
enough in U-Boot to avoid the problem with autoboot in point (1) above.
It doesn't make sense to specify this for the other UART instances.
bootph-all is a generic property documented in dt-schema bootph.yaml.
Define these two additional properties only for the debug UART console, by
defining a new pinctrl template specifically for that. In the following
commits, boards will be converted to use these where appropriate.
[1]: https://source.denx.de/u-boot/u-boot/-/commit/ad7e967738a9c639e07cf50b83ffccdf9a8537b0
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-2-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In preparation of adding a new console UART specific pinctrl template, move
the pinctrl reference to the board DT part. This forces people porting new
boards to consider what exactly they need for their board.
No functional change for the boards upstream.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-1-f345b7a53c91@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
According to documentation, the DBI range size is 0xf20. So fix it.
Cc: stable@vger.kernel.org # 6.14
Fixes: f8af195beeb0 ("arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250422-x1e80100-dts-fix-pcie3-dbi-size-v1-1-c197701fd7e4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
WoA devices using x1e/x1p use android firmware to boot, which notably
includes Gunyah hypervisor. This means that, so far, Linux-based OS
could only boot in EL1 on those devices.
However Windows can replace Gunyah upon boot with it's own hypervisor,
and with the use of tools such as "slbounce", it's possible to do the
same for Linux-based OS, in which case some modifications to the DT are
necessary to facilitate the absence of Gunyah services.
Add a EL2-specific DT overlay and apply it to x1e/x1p WoA devices to
create -el2.dtb for each of them alongside "normal" dtb.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-5-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
x1e80100 has an SMMUv3 connected to PCIe which is normally controlled by
Gunyah and is thus transparent to the OS. However if we boot Linux in
EL2, without Gunyah, we need to manage this IOMMU ourselves. To make
that easier, and since the hardware actually exists, just not "usually"
managed by Linux, describe it in the dts as "reserved".
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-4-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
WoA devices using sc8280xp use android firmware to boot, which notably
includes QHEE hypervisor. This means that, so far, Linux-based OS could
only boot in EL1 on those devices.
However Windows can replace QHEE upon boot with it's own hypervisor, and
with the use of tools such as "slbounce", it's possible to do the same
for Linux-based OS, in which case some modifications to the DT are
necessary to facilitate the absence of QHEE services.
Add a EL2-specific DT overlay and apply it to sc8280xp WoA devices to
create -el2.dtb for each of them alongside "normal" dtb.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-3-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
sc8280xp has an SMMUv3 connected to PCIe which is normally controlled by
QHEE and is thus transparent to the OS. However if we boot Linux in EL2,
without QHEE, we need to manage this IOMMU ourselves. To make that
easier, and since the hardware actually exists, just not "usually"
managed by Linux, describe it in the dts as "reserved".
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-2-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
WoA devices using sc7180 use android firmware to boot, which notably
includes QHEE hypervisor. This means that, so far, Linux-based OS could
only boot in EL1 on those devices.
However Windows can replace QHEE upon boot with it's own hypervisor, and
with the use of tools such as "slbounce", it's possible to do the same
for Linux-based OS, in which case some modifications to the DT are
necessary to facilitate the absence of QHEE services.
Add a EL2-specific DT overlay and apply it to sc7180 WoA devices to
create -el2.dtb for each of them alongside "normal" dtb.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20250503-sc-el2-overlays-v2-1-24e9b4572e15@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Describe the missing power source, bias and direction for each of the USB0
retimer gpio-controlled voltage regulators related pin configuration.
Fixes: 019e1ee32fec ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250422-x1e001de-devkit-dts-fix-retimer-gpios-v2-2-0129c4f2b6d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, on the X Elite Devkit, the pin configuration of the reset
gpios for all three PS8830 USB retimers are left configured by the
bootloader.
Fix that by describing their pin configuration.
Fixes: 019e1ee32fec ("arm64: dts: qcom: x1e001de-devkit: Enable external DP support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250422-x1e001de-devkit-dts-fix-retimer-gpios-v2-1-0129c4f2b6d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-6-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-5-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-4-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-3-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-2-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In the ACPI DSDT table, PPP_RESOURCE_ID_LDO2_J is configured with 1256000
uV instead of the 1200000 uV we have currently in the device tree. Use the
same for consistency and correctness.
Cc: stable@vger.kernel.org
Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250423-x1e-vreg-l2j-voltage-v1-1-24b6a2043025@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Replace the deprecated freq-table-hz property with an operating
points table with all supported frequencies and power levels.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250424-topic-sc7280-upstream-ufs-opps-v1-1-e63494d65f45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add cpufreq-hw node to support cpufreq scaling on QCS8300.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250430-qcs8300-cpufreq-scaling-v2-1-ee41566b8c56@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If you remove clocks property, you should remove clock-names, too.
Fixes warning with dtbs check:
'clocks' is a dependency of 'clock-names'
Fixes: 34279d6e3f32c ("arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250504115120.1432282-4-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fixes the following dtbs check error:
phy@c012000: 'vdda-pll-supply' is a required property
Fixes: e5d3e752b050e ("arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250504115120.1432282-3-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Similarly to MSM8998, add and use modem metadata memory region.
This does not seemingly affect device functionality. But it fixes
DTBs check warning:
remoteproc@4080000: memory-region: [[45], [46]] is too short
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250504115120.1432282-2-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since commit b5af64fceb04 ("soc: qcom: smem: Support reserved-memory
description") the SMEM device can be instantiated directly from a
reserved-memory node.
The 'smem' node is defined in this way for each modern IPQ SoCs except for
IPQ6018. In order to make it inline with the others, move the 'compatible'
and the 'hwlock' properties into the respective reserved-memory node, and
drop the standalone 'smem' node.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250506-ipq6018-drop-smem-v1-1-af99d177be2f@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The J721S2 binding is based on the TI downstream binding in commit
54b0f2a00d92 ("arm64: dts: ti: k3-j721s2-main: add gpu node") from [1]
but with updated compatible strings.
The clock[2] and power[3] indices were verified from HTML docs, while
the interrupt index comes from the TRM[4] (appendix
"J721S2_Appendix_20241106_Public.xlsx", "Interrupts (inputs)",
"GPU_BXS464_WRAP0_GPU_SS_0_OS_IRQ_OUT_0").
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel
[2]: https://downloads.ti.com/tisci/esd/latest/5_soc_doc/j721s2/clocks.html
[3]: https://downloads.ti.com/tisci/esd/latest/5_soc_doc/j721s2/devices.html
[4]: https://www.ti.com/lit/zip/spruj28 (revision E)
Reviewed-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250428-bxs-4-64-dts-v4-2-eddafb4ae19f@imgtec.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Use the new compatible string and power domain name as introduced in
commit 2c01d9099859 ("dt-bindings: gpu: img: Future-proofing
enhancements").
Reviewed-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250428-bxs-4-64-dts-v4-1-eddafb4ae19f@imgtec.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Add the DT node for the PRUSS-M processor subsystem that is present
on the K3 AM62x SoCs. The K3 AM62x family of SoC has one PRUSS-M
instance and it has two Programmable Real-Time Units (PRU0 and PRU1).
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[ Judith: Fix pruss_iclk id for pruss_coreclk_mux ]
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20250430144343.972234-1-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
AM64x device has 4 R5F cores in the main domain. TI MCU firmware uses
main domain timers as tick timers in these firmwares. Hence keep them
as reserved in the Linux device tree.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-12-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The main rti4 watchdog timer is used by the C7x DSP, so reserve the
timer in the linux device tree.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-11-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
C7x DSP uses main_timer2, so mark it as reserved in linux DT.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-10-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-9-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-8-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-7-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
AM62A SoCs have a C7xv DSP subsystem with Analytics engine capability.
This subsystem is intended for deep learning purposes. Define the
device node for C7xv DSP.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-6-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
AM62A SoCs have a single R5F core in wakeup domain. This core is
also used as a device manager for the SoC.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-5-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
AM62A SoCs have a single R5F core in the MCU voltage domain.
Add the R5FSS node with the child node for core0 in MCU voltage
domain .dtsi file.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
AM62 SoC devices have a single core R5F processor in wakeup domain.
The R5F processor in wakeup domain is used as a device manager
for the SoC.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
