| Age | Commit message (Collapse) | Author |
|---|
|
The VHE hyp code has recently gained a few ISBs. Simplify this to one
unconditional ISB in __kvm_vcpu_run_vhe(), and remove the unnecessary
ISB from the kvm_call_hyp_ret() macro.
While kvm_call_hyp_ret() is also used to invoke
__vgic_v3_get_gic_config(), but no ISB is necessary in that case either.
For the moment, an ISB is left in kvm_call_hyp(), as there are many more
users, and removing the ISB would require a more thorough audit.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The NVHE/HVHE and VHE modes have separate implementations of
__activate_cptr_traps() and __deactivate_cptr_traps() in their
respective switch.c files. There's some duplication of logic, and it's
not currently possible to reuse this logic elsewhere.
Move the logic into the common switch.h header so that it can be reused,
and de-duplicate the common logic.
This rework changes the way SVE traps are deactivated in VHE mode,
aligning it with NVHE/HVHE modes:
* Before this patch, VHE's __deactivate_cptr_traps() would
unconditionally enable SVE for host EL2 (but not EL0), regardless of
whether the ARM64_SVE cpucap was set.
* After this patch, VHE's __deactivate_cptr_traps() will take the
ARM64_SVE cpucap into account. When ARM64_SVE is not set, SVE will be
trapped from EL2 and below.
The old and new behaviour are both benign:
* When ARM64_SVE is not set, the host will not touch SVE state, and will
not reconfigure SVE traps. Host EL0 access to SVE will be trapped as
expected.
* When ARM64_SVE is set, the host will configure EL0 SVE traps before
returning to EL0 as part of reloading the EL0 FPSIMD/SVE/SME state.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently there is no ISB between __deactivate_cptr_traps() disabling
traps that affect EL2 and fpsimd_lazy_switch_to_host() manipulating
registers potentially affected by CPTR traps.
When NV is not in use, this is safe because the relevant registers are
only accessed when guest_owns_fp_regs() && vcpu_has_sve(vcpu), and this
also implies that SVE traps affecting EL2 have been deactivated prior to
__guest_entry().
When NV is in use, a guest hypervisor may have configured SVE traps for
a nested context, and so it is necessary to have an ISB between
__deactivate_cptr_traps() and fpsimd_lazy_switch_to_host().
Due to the current lack of an ISB, when a guest hypervisor enables SVE
traps in CPTR, the host can take an unexpected SVE trap from within
fpsimd_lazy_switch_to_host(), e.g.
| Unhandled 64-bit el1h sync exception on CPU1, ESR 0x0000000066000000 -- SVE
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| pstate: 604023c9 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __kvm_vcpu_run+0x6f4/0x844
| lr : __kvm_vcpu_run+0x150/0x844
| sp : ffff800083903a60
| x29: ffff800083903a90 x28: ffff000801f4a300 x27: 0000000000000000
| x26: 0000000000000000 x25: ffff000801f90000 x24: ffff000801f900f0
| x23: ffff800081ff7720 x22: 0002433c807d623f x21: ffff000801f90000
| x20: ffff00087f730730 x19: 0000000000000000 x18: 0000000000000000
| x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
| x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff000801f90d70
| x5 : 0000000000001000 x4 : ffff8007fd739000 x3 : ffff000801f90000
| x2 : 0000000000000000 x1 : 00000000000003cc x0 : ffff800082f9d000
| Kernel panic - not syncing: Unhandled exception
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x60/0x80
| dump_stack+0x18/0x24
| panic+0x168/0x360
| __panic_unhandled+0x68/0x74
| el1h_64_irq_handler+0x0/0x24
| el1h_64_sync+0x6c/0x70
| __kvm_vcpu_run+0x6f4/0x844 (P)
| kvm_arm_vcpu_enter_exit+0x64/0xa0
| kvm_arch_vcpu_ioctl_run+0x21c/0x870
| kvm_vcpu_ioctl+0x1a8/0x9d0
| __arm64_sys_ioctl+0xb4/0xf4
| invoke_syscall+0x48/0x104
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x30/0xcc
| el0t_64_sync_handler+0x10c/0x138
| el0t_64_sync+0x198/0x19c
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x0000,000002c0,02df4fb9,97ee773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: Unhandled exception ]---
Fix this by adding an ISB between __deactivate_traps() and
fpsimd_lazy_switch_to_host().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Assigning a value to a system register doesn't do what it is
supposed to be doing if that register is one that has RESx bits.
The main problem is that we use __vcpu_sys_reg(), which can be used
both as a lvalue and rvalue. When used as a lvalue, the bit masking
occurs *before* the new value is assigned, meaning that we (1) do
pointless work on the old cvalue, and (2) potentially assign an
invalid value as we fail to apply the masks to it.
Fix this by providing a new __vcpu_assign_sys_reg() that does
what it says on the tin, and sanitises the *new* value instead of
the old one. This comes with a significant amount of churn.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/misc-6.16:
: .
: Misc changes and improvements for 6.16:
:
: - Add a new selftest for the SVE host state being corrupted by a guest
:
: - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2,
: ensuring that the window for interrupts is slightly bigger, and avoiding
: a pretty bad erratum on the AmpereOne HW
:
: - Replace a couple of open-coded on/off strings with str_on_off()
:
: - Get rid of the pKVM memblock sorting, which now appears to be superflous
:
: - Drop superflous clearing of ICH_LR_EOI in the LR when nesting
:
: - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from
: a pretty bad case of TLB corruption unless accesses to HCR_EL2 are
: heavily synchronised
:
: - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables
: in a human-friendly fashion
: .
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
KVM: arm64: nv: Remove clearing of ICH_LR<n>.EOI if ICH_LR<n>.HW == 1
KVM: arm64: Drop sort_memblock_regions()
KVM: arm64: selftests: Add test for SVE host corruption
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Replace ternary flags with str_on_off() helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
On AmpereOne AC04, updates to HCR_EL2 can rarely corrupt simultaneous
translations for data addresses initiated by load/store instructions.
Only instruction initiated translations are vulnerable, not translations
from prefetches for example. A DSB before the store to HCR_EL2 is
sufficient to prevent older instructions from hitting the window for
corruption, and an ISB after is sufficient to prevent younger
instructions from hitting the window for corruption.
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250513184514.2678288-1-scott@os.amperecomputing.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A TLBI by VA for S1 must take effect on our pseudo-TLB for VNCR
and potentially knock the fixmap mapping. Even worse, that TLBI
must be able to work cross-vcpu.
For that, we track on a per-VM basis if any VNCR is mapped, using
an atomic counter. Whenever a TLBI S1E2 occurs and that this counter
is non-zero, we take the long road all the way back to the core code.
There, we iterate over all vcpus and check whether this particular
invalidation has any damaging effect. If it does, we nuke the pseudo
TLB and the corresponding fixmap.
Yes, this is costly.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-14-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since we now have a way to map the guest's VNCR_EL2 on the host,
we can point the host's VNCR_EL2 to it and go full circle!
Note that we unconditionally assign the fixmap to VNCR_EL2,
irrespective of the guest's version being mapped or not. We want
to take a fault on first access, so the fixmap either contains
something guranteed to be either invalid or a guest mapping.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-13-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently check for HCR_EL2.NV being set to decide whether we
need to repaint PSTATE.M to say EL2 instead of EL1 on exit.
However, this isn't correct when L2 is itself a hypervisor, and
that L1 as set its own HCR_EL2.NV. That's because we "flatten"
the state and inherit parts of the guest's own setup. In that case,
we shouldn't adjust PSTATE.M, as this is really EL1 for both us
and the guest.
Instead of trying to try and work out how we ended-up with HCR_EL2.NV
being set by introspecting both the host and guest states, use
a per-CPU flag to remember the context (HYP or not), and use that
information to decide whether PSTATE needs tweaking.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Apple M* CPUs provide an IMPDEF trap for PMUv3 sysregs, where ESR_EL2.EC
is a reserved value (0x3F) and a sysreg-like ISS is reported in
AFSR1_EL2.
Compute a synthetic ESR for these PMUv3 traps, giving the illusion of
something architectural to the rest of KVM.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
| if (WARN_ON(sve_get_vl() != vl)) {
| force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
| return;
| }
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c132273 ("KVM: arm64: Save/restore SVE state for nVHE")
Fixes: 2e3cf82063a00ea0 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE,
with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code
in the header depends on function definitions provided by
arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c
when they include the header.
This is an unusual header dependency, and prevents the use of
arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would
result in compiler warnings regarding missing definitions, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined
| 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined
| 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
| | ^~~~~~~~~~~~~~~~~
Refactor the logic such that the header doesn't depend on anything from
the C files. There should be no functional change as a result of this
patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For historical reasons, the VHE and nVHE/hVHE implementations of
__activate_cptr_traps() pair with a common implementation of
__kvm_reset_cptr_el2(), which ideally would be named
__deactivate_cptr_traps().
Rename __kvm_reset_cptr_el2() to __deactivate_cptr_traps(), and split it
into separate VHE and nVHE/hVHE variants so that each can be paired with
its corresponding implementation of __activate_cptr_traps().
At the same time, fold kvm_write_cptr_el2() into its callers. This
makes it clear in-context whether a write is made to the CPACR_EL1
encoding or the CPTR_EL2 encoding, and removes the possibility of
confusion as to whether kvm_write_cptr_el2() reformats the sysreg fields
as cpacr_clear_set() does.
In the nVHE/hVHE implementation of __activate_cptr_traps(), placing the
sysreg writes within the if-else blocks requires that the call to
__activate_traps_fpsimd32() is moved earlier, but as this was always
called before writing to CPTR_EL2/CPACR_EL1, this should not result in a
functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-6-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that the host eagerly saves its own FPSIMD/SVE/SME state,
non-protected KVM never needs to save the host FPSIMD/SVE/SME state,
and the code to do this is never used. Protected KVM still needs to
save/restore the host FPSIMD/SVE state to avoid leaking guest state to
the host (and to avoid revealing to the host whether the guest used
FPSIMD/SVE/SME), and that code needs to be retained.
Remove the unused code and data structures.
To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the
VHE hyp code, the nVHE/hVHE version is moved into the shared switch
header, where it is only invoked when KVM is in protected mode.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-timers:
: .
: Nested Virt support for the EL2 timers. From the initial cover letter:
:
: "Here's another batch of NV-related patches, this time bringing in most
: of the timer support for EL2 as well as nested guests.
:
: The code is pretty convoluted for a bunch of reasons:
:
: - FEAT_NV2 breaks the timer semantics by redirecting HW controls to
: memory, meaning that a guest could setup a timer and never see it
: firing until the next exit
:
: - We go try hard to reflect the timer state in memory, but that's not
: great.
:
: - With FEAT_ECV, we can finally correctly emulate the virtual timer,
: but this emulation is pretty costly
:
: - As a way to make things suck less, we handle timer reads as early as
: possible, and only defer writes to the normal trap handling
:
: - Finally, some implementations are badly broken, and require some
: hand-holding, irrespective of NV support. So we try and reuse the NV
: infrastructure to make them usable. This could be further optimised,
: but I'm running out of patience for this sort of HW.
:
: [...]"
: .
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Document EL2 timer API
KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
KVM: arm64: nv: Sanitise CNTHCTL_EL2
KVM: arm64: nv: Propagate CNTHCTL_EL2.EL1NV{P,V}CT bits
KVM: arm64: nv: Add trap routing for CNTHCTL_EL2.EL1{NVPCT,NVVCT,TVT,TVCT}
KVM: arm64: Handle counter access early in non-HYP context
KVM: arm64: nv: Accelerate EL0 counter accesses from hypervisor context
KVM: arm64: nv: Accelerate EL0 timer read accesses when FEAT_ECV in use
KVM: arm64: nv: Use FEAT_ECV to trap access to EL0 timers
KVM: arm64: nv: Publish emulated timer interrupt state in the in-memory state
KVM: arm64: nv: Sync nested timer state with FEAT_NV2
KVM: arm64: nv: Add handling of EL2-specific timer registers
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similarly to handling the physical timer accesses early when FEAT_ECV
causes a trap, we try to handle the physical counter without returning
to the general sysreg handling.
More surprisingly, we introduce something similar for the virtual
counter. Although this isn't necessary yet, it will prove useful on
systems that have a broken CNTVOFF_EL2 implementation. Yes, they exist.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Although FEAT_ECV allows us to correctly emulate the timers, it also
reduces performances pretty badly.
Mitigate this by emulating the CTL/CVAL register reads in the
inner run loop, without returning to the general kernel.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There is no such thing as CPACR_ELx in the architecture.
What we have is CPACR_EL1, for which CPTR_EL12 is an accessor.
Rename CPACR_ELx_* to CPACR_EL1_*, and fix the bit of code using
these names.
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241219173351.1123087-5-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Just like the rest of the FP/SIMD state, FPMR needs to be context
switched.
The only interesting thing here is that we need to treat the pKVM
part a bit differently, as the host FP state is never written back
to the vcpu thread, but instead stored locally and eagerly restored.
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240820131802.3547589-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-sve:
: CPTR_EL2, FPSIMD/SVE support for nested
:
: This series brings support for honoring the guest hypervisor's CPTR_EL2
: trap configuration when running a nested guest, along with support for
: FPSIMD/SVE usage at L1 and L2.
KVM: arm64: Allow the use of SVE+NV
KVM: arm64: nv: Add additional trap setup for CPTR_EL2
KVM: arm64: nv: Add trap description for CPTR_EL2
KVM: arm64: nv: Add TCPAC/TTA to CPTR->CPACR conversion helper
KVM: arm64: nv: Honor guest hypervisor's FP/SVE traps in CPTR_EL2
KVM: arm64: nv: Load guest FP state for ZCR_EL2 trap
KVM: arm64: nv: Handle CPACR_EL1 traps
KVM: arm64: Spin off helper for programming CPTR traps
KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state
KVM: arm64: nv: Use guest hypervisor's max VL when running nested guest
KVM: arm64: nv: Save guest's ZCR_EL2 when in hyp context
KVM: arm64: nv: Load guest hyp's ZCR into EL1 state
KVM: arm64: nv: Handle ZCR_EL2 traps
KVM: arm64: nv: Forward SVE traps to guest hypervisor
KVM: arm64: nv: Forward FP/ASIMD traps to guest hypervisor
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/el2-kcfi:
: kCFI support in the EL2 hypervisor, courtesy of Pierre-Clément Tosi
:
: Enable the usage fo CONFIG_CFI_CLANG (kCFI) for hardening indirect
: branches in the EL2 hypervisor. Unlike kernel support for the feature,
: CFI failures at EL2 are always fatal.
KVM: arm64: nVHE: Support CONFIG_CFI_CLANG at EL2
KVM: arm64: Introduce print_nvhe_hyp_panic helper
arm64: Introduce esr_brk_comment, esr_is_cfi_brk
KVM: arm64: VHE: Mark __hyp_call_panic __noreturn
KVM: arm64: nVHE: gen-hyprel: Skip R_AARCH64_ABS32
KVM: arm64: nVHE: Simplify invalid_host_el2_vect
KVM: arm64: Fix __pkvm_init_switch_pgd call ABI
KVM: arm64: Fix clobbered ELR in sync abort/SError
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We need to teach KVM a couple of new tricks. CPTR_EL2 and its
VHE accessor CPACR_EL1 need to be handled specially:
- CPACR_EL1 is trapped on VHE so that we can track the TCPAC
and TTA bits
- CPTR_EL2.{TCPAC,E0POE} are propagated from L1 to L2
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Start folding the guest hypervisor's FP/SVE traps into the value
programmed in hardware. Note that as of writing this is dead code, since
KVM does a full put() / load() for every nested exception boundary which
saves + flushes the FP/SVE state.
However, this will become useful when we can keep the guest's FP/SVE
state alive across a nested exception boundary and the host no longer
needs to conservatively program traps.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Round out the ZCR_EL2 gymnastics by loading SVE state in the fast path
when the guest hypervisor tries to access SVE state.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Handle CPACR_EL1 accesses when running a VHE guest. In order to
limit the cost of the emulation, implement it ass a shallow exit.
In the other cases:
- this is a nVHE L1 which will write to memory, and we don't trap
- this is a L2 guest:
* the L1 has CPTR_EL2.TCPAC==0, and the L2 has direct register
access
* the L1 has CPTR_EL2.TCPAC==1, and the L2 will trap, but the
handling is defered to the general handling for forwarding
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
A subsequent change to KVM will add preliminary support for merging a
guest hypervisor's CPTR traps with that of KVM. Prepare by spinning off
a new helper for managing CPTR traps.
Avoid reading CPACR_EL1 for the baseline trap config, and start off with
the most restrictive set of traps that is subsequently relaxed.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Given that the sole purpose of __hyp_call_panic() is to call panic(), a
__noreturn function, give it the __noreturn attribute, removing the need
for its caller to use unreachable().
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240610063244.2828978-6-ptosi@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Due to the way FEAT_NV2 suppresses traps when accessing EL2
system registers, we can't track when the guest changes its
HCR_EL2.TGE setting. This means we always trap EL1 TLBIs,
even if they don't affect any L2 guest.
Given that invalidating the EL2 TLBs doesn't require any messing
with the shadow stage-2 page-tables, we can simply emulate the
instructions early and return directly to the guest.
This is conditioned on the instruction being an EL1 one and
the guest's HCR_EL2.{E2H,TGE} being {1,1} (indicating that
the instruction targets the EL2 S1 TLBs), or the instruction
being one of the EL2 ones (which are not ambiguous).
EL1 TLBIs issued with HCR_EL2.{E2H,TGE}={1,0} are not handled
here, and cause a full exit so that they can be handled in
the context of a VMID.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When setting/clearing CPACR bits for EL0 and EL1, use the ELx
format of the bits, which covers both. This makes the code
clearer, and reduces the chances of accidentally missing a bit.
No functional change intended.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In subsequent patches, n/vhe will diverge on saving the host
fpsimd/sve state when taking a guest fpsimd/sve trap. Add a
specialized helper to handle it.
No functional change intended.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-eret-pauth:
: .
: Add NV support for the ERETAA/ERETAB instructions. From the cover letter:
:
: "Although the current upstream NV support has *some* support for
: correctly emulating ERET, that support is only partial as it doesn't
: support the ERETAA and ERETAB variants.
:
: Supporting these instructions was cast aside for a long time as it
: involves implementing some form of PAuth emulation, something I wasn't
: overly keen on. But I have reached a point where enough of the
: infrastructure is there that it actually makes sense. So here it is!"
: .
KVM: arm64: nv: Work around lack of pauth support in old toolchains
KVM: arm64: Drop trapping of PAuth instructions/keys
KVM: arm64: nv: Advertise support for PAuth
KVM: arm64: nv: Handle ERETA[AB] instructions
KVM: arm64: nv: Add emulation for ERETAx instructions
KVM: arm64: nv: Add kvm_has_pauth() helper
KVM: arm64: nv: Reinject PAC exceptions caused by HCR_EL2.API==0
KVM: arm64: nv: Handle HCR_EL2.{API,APK} independently
KVM: arm64: nv: Honor HFGITR_EL2.ERET being set
KVM: arm64: nv: Fast-track 'InHost' exception returns
KVM: arm64: nv: Add trap forwarding for ERET and SMC
KVM: arm64: nv: Configure HCR_EL2 for FEAT_NV2
KVM: arm64: nv: Drop VCPU_HYP_CONTEXT flag
KVM: arm64: Constraint PAuth support to consistent implementations
KVM: arm64: Add helpers for ESR_ELx_ERET_ISS_ERET*
KVM: arm64: Harden __ctxt_sys_reg() against out-of-range values
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The per-CPU host context structure contains a __hyp_running_vcpu that
serves as a replacement for kvm_get_current_vcpu() in contexts where
we cannot make direct use of it (such as in the nVHE hypervisor).
Since there is a lot of common code between nVHE and VHE, the latter
also populates this field even if kvm_get_running_vcpu() always works.
We currently pretty inconsistent when populating __hyp_running_vcpu
to point to the currently running vcpu:
- on {n,h}VHE, we set __hyp_running_vcpu on entry to __kvm_vcpu_run
and clear it on exit.
- on VHE, we set __hyp_running_vcpu on entry to __kvm_vcpu_run_vhe
and never clear it, effectively leaving a dangling pointer...
VHE is obviously the odd one here. Although we could make it behave
just like nVHE, this wouldn't match the behaviour of KVM with VHE,
where the load phase is where most of the context-switch gets done.
So move all the __hyp_running_vcpu management to the VHE-specific
load/put phases, giving us a bit more sanity and matching the
behaviour of kvm_get_running_vcpu().
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502154030.3011995-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To avoid direct comparison against the fp_owner enum, add a new
function that performs the check, host_owns_fp_regs(), to
complement the existing guest_owns_fp_regs().
To check for fpsimd state ownership, use the helpers instead of
directly using the enums.
No functional change intended.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
guest_owns_fp_regs() will be used to check fpsimd state ownership
across kvm/arm64. Therefore, move it to kvm_host.h to widen its
scope.
Moreover, the host state is not per-vcpu anymore, the vcpu
parameter isn't used, so remove it as well.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently insist on disabling PAuth on vcpu_load(), and get to
enable it on first guest use of an instruction or a key (ignoring
the NV case for now).
It isn't clear at all what this is trying to achieve: guests tend
to use PAuth when available, and nothing forces you to expose it
to the guest if you don't want to. This also isn't totally free:
we take a full GPR save/restore between host and guest, only to
write ten 64bit registers. The "value proposition" escapes me.
So let's forget this stuff and enable PAuth eagerly if exposed to
the guest. This results in much simpler code. Performance wise,
that's not bad either (tested on M2 Pro running a fully automated
Debian installer as the workload):
- On a non-NV guest, I can see reduction of 0.24% in the number
of cycles (measured with perf over 10 consecutive runs)
- On a NV guest (L2), I see a 2% reduction in wall-clock time
(measured with 'time', as M2 doesn't have a PMUv3 and NV
doesn't support it either)
So overall, a much reduced complexity and a (small) performance
improvement.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-16-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we have some emulation in place for ERETA[AB], we can
plug it into the exception handling machinery.
As for a bare ERET, an "easy" ERETAx instruction is processed as
a fixup, while something that requires a translation regime
transition or an exception delivery is left to the slow path.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-14-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If the L1 hypervisor decides to trap ERETs while running L2,
make sure we don't try to emulate it, just like we wouldn't
if it had its NV bit set.
The exception will be reinjected from the core handler.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A significant part of the FEAT_NV extension is to trap ERET
instructions so that the hypervisor gets a chance to switch
from a vEL2 L1 guest to an EL1 L2 guest.
But this also has the unfortunate consequence of trapping ERET
in unsuspecting circumstances, such as staying at vEL2 (interrupt
handling while being in the guest hypervisor), or returning to host
userspace in the case of a VHE guest.
Although we already make some effort to handle these ERET quicker
by not doing the put/load dance, it is still way too far down the
line for it to be efficient enough.
For these cases, it would ideal to ERET directly, no question asked.
Of course, we can't do that. But the next best thing is to do it as
early as possible, in fixup_guest_exit(), much as we would handle
FPSIMD exceptions.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the HCR_EL2 configuration for FEAT_NV2, adding the required
bits for running a guest hypervisor, and overall merging the
allowed bits provided by the guest.
This heavily replies on unavaliable features being sanitised
when the HCR_EL2 shadow register is accessed, and only a couple
of bits must be explicitly disabled.
Non-NV guests are completely unaffected by any of this.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
It has become obvious that HCR_EL2.NV serves the exact same use
as VCPU_HYP_CONTEXT, only in an architectural way. So just drop
the flag for good.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In retrospect, it is fairly obvious that the FP state ownership
is only meaningful for a given CPU, and that locating this
information in the vcpu was just a mistake.
Move the ownership tracking into the host data structure, and
rename it from fp_state to fp_owner, which is a better description
(name suggested by Mark Brown).
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to facilitate the introduction of new per-CPU state,
add a new host_data_ptr() helped that hides some of the per-CPU
verbosity, and make it easier to move that state around in the
future.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
|
|
* kvm-arm64/mops:
: KVM support for MOPS, courtesy of Kristina Martsenko
:
: MOPS adds new instructions for accelerating memcpy(), memset(), and
: memmove() operations in hardware. This series brings virtualization
: support for KVM guests, and allows VMs to run on asymmetrict systems
: that may have different MOPS implementations.
KVM: arm64: Expose MOPS instructions to guests
KVM: arm64: Add handler for MOPS exceptions
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
To date the VHE code has aggressively reloaded the stage-2 MMU context
on every guest entry, despite the fact that this isn't necessary. This
was probably done for consistency with the nVHE code, which needs to
switch in/out the stage-2 MMU context as both the host and guest run at
EL1.
Hoist __load_stage2() into kvm_vcpu_load_vhe(), thus avoiding a reload
on every guest entry/exit. This is likely to be beneficial to systems
with one of the speculative AT errata, as there is now one fewer context
synchronization event on the guest entry path. Additionally, it is
possible that implementations have hitched correctness mitigations on
writes to VTTBR_EL2, which are now elided on guest re-entry.
Note that __tlb_switch_to_guest() is deliberately left untouched as it
can be called outside the context of a running vCPU.
Link: https://lore.kernel.org/r/20231018233212.2888027-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The names for the helpers we expose to the 'generic' KVM code are a bit
imprecise; we switch the EL0 + EL1 sysreg context and setup trap
controls that do not need to change for every guest entry/exit. Rename +
shuffle things around a bit in preparation for loading the stage-2 MMU
context on vcpu_load().
Link: https://lore.kernel.org/r/20231018233212.2888027-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Contrary to common belief, HCR_EL2.TGE has a direct and immediate
effect on the way the EL0 physical counter is offset. Flipping
TGE from 1 to 0 while at EL2 immediately changes the way the counter
compared to the CVAL limit.
This means that we cannot directly save/restore the guest's view of
CVAL, but that we instead must treat it as if CNTPOFF didn't exist.
Only in the world switch, once we figure out that we do have CNTPOFF,
can we must the offset back and forth depending on the polarity of
TGE.
Fixes: 2b4825a86940 ("KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
An Armv8.8 FEAT_MOPS main or epilogue instruction will take an exception
if executed on a CPU with a different MOPS implementation option (A or
B) than the CPU where the preceding prologue instruction ran. In this
case the OS exception handler is expected to reset the registers and
restart execution from the prologue instruction.
A KVM guest may use the instructions at EL1 at times when the guest is
not able to handle the exception, expecting that the instructions will
only run on one CPU (e.g. when running UEFI boot services in the guest).
As KVM may reschedule the guest between different types of CPUs at any
time (on an asymmetric system), it needs to also handle the resulting
exception itself in case the guest is not able to. A similar situation
will also occur in the future when live migrating a guest from one type
of CPU to another.
Add handling for the MOPS exception to KVM. The handling can be shared
with the EL0 exception handler, as the logic and register layouts are
the same. The exception can be handled right after exiting a guest,
which avoids the cost of returning to the host exit handler.
Similarly to the EL0 exception handler, in case the main or epilogue
instruction is being single stepped, it makes sense to finish the step
before executing the prologue instruction, so advance the single step
state machine.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230922112508.1774352-2-kristina.martsenko@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
|
