summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-12-20omap3: igepv2: LED gpio-led:green:d1 is active lowLaurent Pinchart
Make sure the LED is turned off at boot time, and configure the GPIO LED device as active low. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap3: igepv2: Don't call gpio_set_value right aftergpio_direction_outputLaurent Pinchart
gpio_direction_output() has a value argument, there's no need to call gpio_set_value() explicitly right after. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap1: Fix innovator FPGA init for multi-omapTony Lindgren
No need to call this early from init_irq. Also recent changes initialize GPIO now later, so calling gpio_request from init_irq will make it fail. While at it, also remove the unnecessary EXPORT_SYMBOL. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20Fix IGEPv2 second MMC channel power supplyMarc Zyngier
Commit 72f381ba056 (omap3: Remove VMMC2 regulator on IGEP v2) removed an unused regulator entry, but left the second MMC channel (used by the Libertas WLAN module) without link to power regulator. This causes the SDIO module to fail being detected. This patch adds the two regulators that actually feed the WLAN module (1v8 from the TWL4030 VIO LDO, and a fixed 3v3). With that patch, the second channel is properly detected. Details of the power supply implementation were kindly provided by Enric Balletbo i Serra. Also change vmmc1 to use symbolic names instead of direct device reference. Tested on an IGEPv2 Rev-B. Signed-off-by: Marc Zyngier <maz@misterjones.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap2430: hwmod: remove stray declarationAnand Gadiyar
Patch "OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430" in linux-next as of 20101203 introduced the following build warning - fix this by removing the stray i2c_dev_attr. arch/arm/mach-omap2/omap_hwmod_2430_data.c:483: warning: 'i2c_dev_attr' defined but not used Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20Added video data to support tvout on rx51Srikar
To support tvout on rx51,added Intilization data, tvout as display device and enabled venc through gpio on rx51 Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap: rx51: Add supplies and data for codec b part ofTLV320AIC34Jarkko Nikula
Upcoming ASoC core and tlv320aic3x changes makes possible to take b part of TLV320AIC34 into use on RX51/N900. Prepare to this by adding virtual supplies and platform data for b part of the codec. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap: rx51: Remove extra tlv320aic3x.h inclusionJarkko Nikula
Remove second tlv320aic3x.h inclusion that came along the commit f0fba2a "ASoC: multi-component - ASoC Multi-Component Support". Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20arm: mach-omap2: Kconfig: fix incorrect optionAaro Koskinen
There is no MFD config option, MFD_SUPPORT should be selected instead. This will prevent build errors when trying out different configurations. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20arm: mach-omap2: hsmmc_reset: fix clk_get() error handlingAaro Koskinen
clk_get() return value should be checked with IS_ERR(). Furthermore, clocks should be put and disabled properly. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP: DMA: Convert DMA library into platform driverG, Manjunath Kondaiah
Convert DMA library into DMA platform driver and make use of platform data provided by hwmod data base for OMAP2+ onwards. For OMAP1 processors, the DMA driver in mach-omap uses resource structures for getting platform data. Thanks to Tony Lindgren <tony@atomide.com> for fixing various omap1 issues and testing the same on OSK5912 board. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP2+: DMA: hwmod: Device registrationG, Manjunath Kondaiah
Prepare OMAP2+ DMA to use hwmod infrastructure so that DMA can register as platform device. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP1: DMA: Implement in platform device modelG, Manjunath Kondaiah
Implement OMAP1 DMA as platform device and add support for registering through platform device layer using resource structures. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP4: hwmod data: add system DMABenoit Cousson
Add OMAP4 DMA hwmod data. In addition to original dma hwmod data, the following changes are added. 1. DMA device attributes structure is introduced for diffenrenciating OMAP cpu's based on DMA features. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP3: hwmod data: add system DMAG, Manjunath Kondaiah
Add OMAP3 DMA hwmod data Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP2430: hwmod data: add system DMAG, Manjunath Kondaiah
Add OMAP2430 DMA hwmod data and also add required DMA device attributes. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP2420: hwmod data: add system DMAG, Manjunath Kondaiah
Add OMAP2420 DMA hwmod data and also add required DMA device attributes. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP: DMA: Introduce errata handling featureG, Manjunath Kondaiah
Implement errata handling to use flags instead of cpu_is_* and cpu_class_* in the code. The errata flags are initialized at init time and during runtime we are using the errata variable (via the IS_DMA_ERRATA macro) to execute the required errata workaround. Reused errata handling patch from: Peter Ujfalusi <peter.ujfalusi@nokia.com> https://patchwork.kernel.org/patch/231191/ Changes to above patch: 1. Changes are done for converting all the existing errata work arounds to use this feature. 2. Detailed description for each errata is added. 3. Fixed bug in SET_DMA_ERRATA macro 4. Bit shifting in macro definitions are replaced with BIT() macro Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP: DMA: Replace read/write macros with functionsG, Manjunath Kondaiah
Prepare DMA library to get converted into DMA driver using platform device model and hwmod infrastucture(for omap2+, resource structures for omap1) The low level read/write macros are replaced with static inline functions and register offsets are handled through static register offset tables mapped through enumeration constants. These low level read/write functions along with static register offset tables will be moved to respective mach-omap dma files in the later patches of this series. There are no functionality changes with these changes except change in logic for handling 16bit registers of OMAP1. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20I2C: i2c-omap: Change device name: i2c_omap -> omap_i2cBenoit Cousson
The convention for omap device naming is omap_XXX. Rename the device and driver name in order to stick to this naming convention. Change device name in clock nodes as well. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Ben Dooks <ben-i2c@fluff.org> Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap1: pm_bus: Fix compilation warningMarek Belisko
Fix following compilation warning: arch/arm/mach-omap1/pm_bus.c: In function 'omap1_pm_runtime_resume': arch/arm/mach-omap1/pm_bus.c:51: warning: unused variable 'ret' Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap1: htc_herald: Fix compilation warningMarek Belisko
Patch fix following compilation warning: arch/arm/mach-omap1/board-htcherald.c:442: warning: large integer implicitly truncated to unsigned type Hopefully this is just a typo. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap: serial: Change device name: omap-hsuart -> omap_uartBenoit Cousson
The naming convention for omap_device is omap_XXX. Rename the device and driver name in order to stick to this naming convention. Remove the hs prefix that is implicit for every OMAP uarts. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Govindraj Raja <govindraj.raja@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20Merge branches 'msm-core' and 'msm-mmc' into for-nextDavid Brown
* msm-core: (28 commits) msm: initial framebuffer support msm: add handling for clocks tagged as CLK_MINMAX msm: trout: change name of pmdh_clk to mddi_clk msm: add CLK_MINMAX to pmdh_clk msm: trout: add gpio_to_irq msm: iommu: Use the correct memory allocation flag msm_serial: Remove redundant unlikely() msm: iommu: Miscellaneous code cleanup msm: iommu: Support cache-coherent memory access msm: iommu: Definitions for extended memory attributes msm: iommu: Kconfig dependency for the IOMMU API msm: iommu: Check if device is already attached msm: iommu: Kconfig item for cacheable page tables msm: iommu: Don't flush page tables if no devices attached msm: iommu: Mark functions with the right section names msm: iommu: Support for the 2nd GFX core's IOMMU msm: iommu: Revise GFX2D0 IOMMU contexts and M2V mappings msm: iommu: Revise GFX3D IOMMU contexts and M2V mappings msm: iommu: Use more consistent naming in platform data msm: iomap: Addresses and IRQs for 2nd GFX core IOMMU ... * msm-mmc: (33 commits) mmc: msm_sdcc: Check for only DATA_END interrupt to end a request mmc: msm_sdcc: Fix bug in PIO mode when data size is not word aligned mmc: msm_sdcc: Reset SDCC in case of data transfer errors mmc: msm_sdcc: Add prog done interrupt support mmc: msm_sdcc: Fix possible circular locking dependency warning msm: initial framebuffer support msm: add handling for clocks tagged as CLK_MINMAX msm: trout: change name of pmdh_clk to mddi_clk msm: add CLK_MINMAX to pmdh_clk msm: trout: add gpio_to_irq msm: iommu: Use the correct memory allocation flag msm_serial: Remove redundant unlikely() msm: iommu: Miscellaneous code cleanup msm: iommu: Support cache-coherent memory access msm: iommu: Definitions for extended memory attributes msm: iommu: Kconfig dependency for the IOMMU API msm: iommu: Check if device is already attached msm: iommu: Kconfig item for cacheable page tables msm: iommu: Don't flush page tables if no devices attached msm: iommu: Mark functions with the right section names ...
2010-12-20Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: INTC interrupt priority level demux fix ARM: mach-shmobile: fix compile warning in mm/init.c
2010-12-20Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: update MAX8998 platform data to get rid of WARN() ARM S3C24XX: Fix compilation of PM code for S3C2416 ARM: S3C24XX: Fix CONFIG_S3C_DEV_NAND Kconfig entry
2010-12-20ARM: SMP: ensure frame pointer is reinitialized for soft-CPU hotplugRussell King
When we soft-CPU hotplug a CPU, we reset the stack pointer and jump back to start_secondary(). This allows us to restart as if the CPU was actually reset. However, we weren't resetting the frame pointer, which could cause problems with backtracing. Reset the frame pointer to zero (which means no parent frame) just like the early assembly code also does. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: mxs: Add build configuration for mxsShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx28evk supportShawn Guo
Add initial mx28evk support with duart and fec0. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx23evk supportShawn Guo
Add initial mx23evk support with duart. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate fec devicesShawn Guo
Dynamically allocate fec devices for MX28, which gets dual fec interface. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate duart devicesShawn Guo
Dynamically allocate duart devices for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add static memory mappingShawn Guo
Create static memory mapping for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add clock supportShawn Guo
Add clock for MXS-based SoCs, MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add iomux supportShawn Guo
MXS-based SoCs implements iomux functions in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add gpio supportShawn Guo
MXS-based SoCs implement gpio support in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add timer supportShawn Guo
There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add low-level debug UART supportShawn Guo
- DEBUG_LL support, which is incompatible with multi-soc MXS image because of different DUART base address on MX23 and MX28 - uncompress message support Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-21Merge branch 'rmobile/urgent' into rmobile-latestPaul Mundt
Conflicts: arch/arm/mach-shmobile/include/mach/entry-macro.S Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21ARM: mach-shmobile: Bump up NR_IRQS to 1024Magnus Damm
Increase NR_IRQS from 512 to 1024 on SH-Mobile ARM. Needed to support vectors in the sh73a0 INTCS block. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21ARM: mach-shmobile: Clean up headsmp.SMagnus Damm
Use PAGE_OFFSET and PHYS_OFFSET for secondary_startup entry point as recommended by Russell King. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21ARM: mach-shmobile: mackerel: Add GPS supportYusuke Goda
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-20ARM: pxa: Add Balloon3 NAND ready checkMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa: Update Balloon3 for new FPGA firmwareMarek Vasut
The new FPGA firmware in Balloon3 uses different methods to control it's bus control lines. In the new version, there are separate registers to set/clear bus control lines. This patch updates affected places. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa: Fix number of IRQs on Balloon3Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: SMP: split out software TLB maintainence broadcastingRussell King
smp.c is becoming too large, so split out the TLB maintainence broadcasting into a separate smp_tlb.c file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: localtimer: clean up local timer on hot unplugRussell King
When a CPU is hot unplugged, the generic tick code cleans up the clock event device, but fails to call down to the device's set_mode function to actually shut the device down. To work around this, we've historically had a local_timer_stop() callback out of the hotplug code. However, this adds needless complexity when we have the clock event device itself available. Explicitly call the clock event device's set_mode function with CLOCK_EVT_MODE_UNUSED, so that the hardware can be cleanly shutdown without any special external callbacks. When/if the generic code is fixed, percpu_timer_stop() can be killed off. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: fix hard-coded control register constantsRussell King
Use the definition we've provided in asm/system.h rather than numeric constants. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: add Versatile Express hotplug CPU supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: fix reporting of spurious wakeupsRussell King
The original scheme for reporting spurious wakeups was broken - it tried to use printk() from a context which wasn't coherent with the other CPUs, which risks corrupting the printk() data. Fix this by noting the number spurious wakeups, and only report them when we are properly woken - when we will be coherent with the rest of the system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-12 19:11:35 +0000