summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-01-03ARM: pxa: fix page table corruption on resumeAric D. Blumer
Before this patch, the following error would sometimes occur after a resume on pxa3xx: /path/to/mm/memory.c:144: bad pmd 8040542e. The problem was that a temporary page table mapping was being improperly restored. The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu to avoid a prefetch abort. The pxa3xx_resume_after_mmu code requires that the r1 register holding the address of this mapping not be modified, however, resume_turn_on_mmu does modify it. It is mostly correct in that r1 receives the base table address, but it may also get other bits in 13:0. This results in pxa3xx_resume_after_mmu restoring the original mapping to the wrong place, corrupting memory and leaving the temporary mapping in place. Signed-off-by: Matt Reimer <mreimer@sdgsystems.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-03ARM: it8152: add IT8152_LAST_IRQ definition to fix build errorMike Rapoport
The commit 6ac6b817f3f4c23c5febd960d8deb343e13af5f3 (ARM: pxa: encode IRQ number into .nr_irqs) removed definition of ITE_LAST_IRQ which caused the following build error: CC arch/arm/common/it8152.o arch/arm/common/it8152.c: In function 'it8152_init_irq': arch/arm/common/it8152.c:86: error: 'IT8152_LAST_IRQ' undeclared (first use in this function) arch/arm/common/it8152.c:86: error: (Each undeclared identifier is reported only once arch/arm/common/it8152.c:86: error: for each function it appears in.) make[2]: *** [arch/arm/common/it8152.o] Error 1 Defining the IT8152_LAST_IRQ in the arch/arm/include/hardware/it8152.c fixes the build. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-03ARM: pxa: PXA_ESERIES depends on FB_W100.Lennert Buytenhek
As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-03ARM: imx/mx27_3ds: Add PMIC supportFabio Estevam
MX27_3DS board has a MC13783 PMIC connected to the CSPI2 port. Add support for the PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()Russell King
Replace the page_to_dma() and dma_to_page() macros with their PFN equivalents. This allows us to map parts of memory which do not have a struct page allocated to them to bus addresses. This will be used internally by dma_alloc_coherent()/dma_alloc_writecombine(). Build tested on Versatile, OMAP1, IOP13xx and KS8695. Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-03Merge branch 'ux500-core' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
2011-01-03Merge branch 'master' of git://git.infradead.org/users/cbou/linux-cns3xxx ↵Russell King
into devel-stable
2011-01-03mx51: fix usb clock supportArnaud Patard (Rtp)
Current code doesn't really enable the usb clocks so if they're disabled when booting linux, the kernel/machine will hang as soon as someone is trying to read a usb register Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03MX51: Add support for usb host 2Arnaud Patard (Rtp)
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arch/arm/plat-mxc/ehci.c: fix errors/typosArnaud Patard (Rtp)
This patch is fixing some issues : - MXC_OTG_UCTRL_OPM_BIT is for USBCTRL register and not PHYCTRL register. - the MXC_EHCI_WAKEUP_ENABLED check was only clearing the bits so never allows to set them. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx3/mx31_3ds: Add support for USB Host2 portFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx3/mx31_3ds: Add support for OTG host modeFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: imx/mx25_3ds: Add USB supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: imx/mx27_3ds: Add USB OTG supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx3/mx35_3ds: Add USB OTG Host modeFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Sascha Hauer
into imx-for-2.6.38-new
2011-01-03ARM: 6605/1: Add missing include "asm/memory.h"Axel Lin
This patch fixes below build error by adding the missing asm/memory.h, which is needed for arch_is_coherent(). $ make pxa3xx_defconfig; make CC init/do_mounts_rd.o In file included from include/linux/list_bl.h:5, from include/linux/rculist_bl.h:7, from include/linux/dcache.h:7, from include/linux/fs.h:381, from init/do_mounts_rd.c:3: include/linux/bit_spinlock.h: In function 'bit_spin_unlock': include/linux/bit_spinlock.h:61: error: implicit declaration of function 'arch_is_coherent' make[1]: *** [init/do_mounts_rd.o] Error 1 make: *** [init] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-03arm: mx50: add mx50 reference design board supportRichard Zhao
Add basic function and uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx50: add core functions support except clockRichard Zhao
Add core definitions and memory map, gpio, irq, iomux, uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx5: mx51/53 have different mxc_cpu_type definitionRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: mx51: define mx51's own MXC_GPIO_IRQSRichard Zhao
mx5 SoCs have different GPIO port count. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03arm: plat-mxc: add full parameter macro to define gpio portRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03ARM: mx5: use config to define boot related addressesRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-02ARM: TWD: enable one-shot modeRussell King
Allow one shot timer mode to be used with the TWD. This allows NOHZ mode to be used on SMP systems using the TWD localtimer. Tested on Versatile Express and U8500. Tested-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-29ux500: add TC35893 keypad platform dataSundar Iyer
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-29Merge branch 'spi' of git://git.linutronix.de/users/bigeasy/soda into spi/nextGrant Likely
* 'spi' of git://git.linutronix.de/users/bigeasy/soda into spi/next spi/pxa2xx: register driver properly spi/pxa2xx: add support for shared IRQ handler spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers arm/pxa2xx: reorgazine SSP and SPI header files spi/pxa2xx: Add CE4100 support spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: pass of_node to spi device and set a parent device
2010-12-29Merge branch 'for-grant' of ↵Grant Likely
git://arago-project.org/git/projects/linux-davinci into spi/next * 'for-grant' of git://arago-project.org/git/projects/linux-davinci into spi/next spi: davinci: fix checkpatch errors spi: davinci: whitespace cleanup spi: davinci: remove unused variable 'pdata' spi: davinci: set chip-select mode in SPIDEF only once spi: davinci: enable both activation and deactivation of chip-selects spi: davinci: remove unnecessary data transmit on CS disable spi: davinci: enable GPIO lines to be used as chip selects spi: davinci: simplify prescalar calculation spi: davinci: remove 'wait_enable' platform data member spi: davinci: make chip-slect specific parameters really chip-select specific spi: davinci: consolidate setup of SPIFMTn in one function spi: davinci: setup chip-select timers values only if timer enabled spi: davinci: add support for wait enable timeouts spi: davinci: remove unused members of davinci_spi_slave spi: davinci: eliminate the single member structure davinci_spi_slave spi: davinci: eliminate unnecessary update of davinci_spi->count spi: davinci: simplify calculation of edma acount value spi: davinci: check for NULL buffer pointer before using it spi: davinci: remove unnecessary disable of SPI spi: davinci: remove unnecessary 'count' variable in driver private data spi: davinci: remove unnecessary completion variable initialization spi: davinci: remove non-useful interrupt mode support spi: davinci: simplify poll mode transfers spi: davinci: add support for interrupt mode spi: davinci: configure the invariable bits in spipc0 only once spi: davinci: remove unnecessary function davinci_spi_bufs_prep() spi: davinci: remove unnecessary call to davinci_spi_setup_transfer() spi: davinci: do not store DMA channel information per chip select spi: davinci: always start transmit DMA spi: davinci: do not use temporary buffer if no transmit data provided spi: davinci: always start receive DMA spi: davinci: use edma_write_slot() to setup EDMA PaRAM slot spi: davinci: fix DMA event generation stoppage spi: davinci: fix EDMA CC errors at end of transfers spi: davinci: handle DMA completion errors correctly spi: davinci: remove usage of additional completion variables for DMA spi: davinci: let DMA operation be specified on per-device basis spi: davinci: remove non-useful "clk_internal" platform data spi: davinci: enable and power-up SPI only when required spi: davinci: setup the driver owner spi: davinci: add additional comments spi: davinci: add EF Johnson Technologies copyright spi: davinci: removed unused #defines spi: davinci: remove unnecessary typecast spi: davinci: do not treat Tx interrupt being set as error spi: davinci: do not allocate DMA channels during SPI device setup spi: davinci: remove unnecessary private data member 'region_size' spi: davinci: shorten variable names spi: davinci: kconfig: add manufacturer name to prompt string
2010-12-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: Fix re-probing with PM_POST_RESTORE notification mmc: atmel-mci: fix multiblock SDIO transfers mmc: at91_mci: fix multiblock SDIO transfers
2010-12-28ARM: fix IXP4xx build failureImre Kaloz
arm: export dma_set_coherent_mask While a regression was fixed with commit 710224fa2750cf (arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"), a new one was introduced as dma_set_coherent_mask wasn't exported for modules. This patch takes care for this issue. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/fib_frontend.c
2010-12-24omap2: Make OMAP2PLUS select OMAP_DM_TIMERBen Gamari
It appears that arch/arm/mach-omap2/timer-gp.o is needed by OMAP2PLUS. Since timer-gp.o has direct dependencies on omap_dm_timer_*, it seems correct for the architecture to depend upon OMAP_DM_TIMER, otherwise unsuspecting integrators will be faced with a whole bunch of linker errors at the end of their kernel build: arch/arm/mach-omap2/built-in.o: In function `omap2_gp_timer_set_mode': /home/bgamari/trees/linux-2.6/arch/arm/mach-omap2/timer-gp.c:84: undefined reference to `omap_dm_timer_stop' /home/bgamari/trees/linux-2.6/arch/arm/mach-omap2/timer-gp.c:88: undefined reference to `omap_dm_timer_get_fclk' /home/bgamari/trees/linux-2.6/arch/arm/mach-omap2/timer-gp.c:90: undefined reference to `omap_dm_timer_set_load_start' ... Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24OMAP4: hwmod data: Fix alignment and end of line in structurefieldsBenoit Cousson
In order to be fully aligned with the Python generator output, change a couple of fields. - Add tab in class structures to align attributes - Add a comma at the end of the following line to simplify the generation by having always the same eol: ".pre_shutdown = &omap2_wd_timer_disable," - Add a blank line before the first entry of the omap44xx_hwmods array. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24OMAP4: hwmod data: Move the DMA structuresBenoit Cousson
The merge of the DMA series on top of the already modified omap_hwmod_data_44xx.c put the dma_system structures at the wrong position in the file. Re-order it properly. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24OMAP4: hwmod data: Move the smartreflex structuresBenoit Cousson
The merge of the SR series on top of the already modified omap_hwmod_data_44xx.c moved the smartreflex structures at the wrong position in the file. - Re-order the structures properly. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Thara Gopinath <thara@ti.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsyscBenoit Cousson
Add the missing SIDLE_SMART_WKUP flag in idlemodes field of the smartreflex sysconfig structure. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Thara Gopinath <thara@ti.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24arm/sharpsl: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is deprecated and scheduled to be removed. Directly flush toggle_charger and sharpsl_bat works on suspend instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk>
2010-12-24ARM: 6541/1: move sev definition to common system.h include fileShiraz Hashim
sev is used to send wakeup event to other cores in ARMv6K and above. This has been moved from platform specific part to standard common ARM header file (asm/system.h). Also introduced wfi() and wfe(). Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24ARM: 6539/1: ux500: remove unnecessary barrier from the secondary startupSrinidhi Kasagar
Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24Revert "ARM: relax ioremap prohibition (309caa9) for -final and -stable"Russell King
This reverts commit 06c1088, as promised in the warning message.
2010-12-24ARM: provide an early platform initialization hookRussell King
This allows platforms to hook into the initialization early to setup things like scheduler clocks, etc. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24ARM: simplify early machine init hooksRussell King
Rather than storing each machine init hook separately, store a pointer to the machine description record and dereference this instead. This pointer is only available while the init sections are present, which is not a problem as we only use it from init code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24ARM: 6538/1: Subarch IRQ handler macros V3Magnus Damm
Per subarch interrupt handler macros V3. This patch breaks out code from the irq_handler macro into arch_irq_handler and arch_irq_handler_default. The macros are put in the header file "entry-macro-multi.S" The arch_irq_handler_default macro is designed to be used by irq_handler in entry-armv.S while arch_irq_handler is suitable for per-subarch use. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24ARM: 6532/1: Allow machine to specify it's own IRQ handlers at run-timeeric miao
Normally different ARM platform has different way to decode the IRQ hardware status and demultiplex to the corresponding IRQ handler. This is highly optimized by macro irq_handler in entry-armv.S, and each machine defines their own macro to decode the IRQ number. However, this prevents multiple machine classes to be built into a single kernel. By allowing each machine to specify thier own handler, and making function pointer 'handle_arch_irq' to point to it at run time, this can be solved. And introduce CONFIG_MULTI_IRQ_HANDLER to allow both solutions to work. Comparing with the highly optimized macro of irq_handler, the new function must be written with care not to lose too much performance. And the IPI stuff on SMP is expected to move to the provided arch IRQ handler as well. The assembly code to invoke handle_arch_irq is optimized by Russell King. Signed-off-by: Eric Miao <eric.miao@canonical.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24ARM: 6540/1: Stop irqsoff trace on return to userTodd Android Poynor
If the irqsoff tracer is in use, stop tracing the interrupt disable interval when returning to userspace. Tracing userspace execution time as interrupts disabled time is not helpful for kernel performance analysis purposes. Only do so if the irqsoff tracer is enabled, to avoid overhead for lockdep, which doesn't care. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24ARM: 6536/1: Add missing SZ_{32,64,128}Stephen Warren
... and also remove misleading comment stating that this header is auto-generated. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Uwe Kleine-Knig <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-24Merge branch 'davinci-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel-stable
2010-12-23arm: omap: tusb6010: add name for MUSB IRQFelipe Balbi
commit fcf173e4511193b1efeccb0f22a8c641b464353b (add names for IRQs in structure resource) forgot to take care of tusb6010 making it fail to probe due to a missing resource. Fix it. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-23arm: omap: craneboard: Add USB EHCI supportSrinath
AM3517/05 Craneboard has one EHCI interface on board using port1. GPIO35 is used as power enable. GPIO38 is used as port1 PHY reset. History: http://marc.info/?l=linux-omap&w=2&r=1&s=Craneboard%253A%2BAdd%2BUSB%2BEHCI%2Bsupport&q=b Signed-off-by: Srinath <srinath@mistralsolutions.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap2+: Initialize serial port for dynamic remuxing for n8x0Tony Lindgren
Use omap_serial_init_port so we can let the serial code handle the remuxing of the RX pads. Note that this patch alone is not enough and additional GPIO related patches are needed. Only initialize uart3_rx_irrx pin, the other uart pins can be stay static. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap2+: Add struct omap_board_data and use it for platform level serial initTony Lindgren
This is needed to pass board specific data such as pads used to the platform level driver init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-11 13:08:53 +0000