summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-11-30at91: Convert remaining boards to new-style UART initializationJean-Christophe PLAGNIOL-VILLARD
Convert the following AT91RM9200-based boards to the new-style UART initialization: - Ajeco 1ARM Single Board Computer - Sperry-Sun KAFA board - picotux 200 Remove the deprecated at91_init_serial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selectedDave Martin
Currently, the kprobes implementation for ARM only supports the ARM instruction set, so it only works if CONFIG_THUMB2_KERNEL is not enabled. Until kprobes is updated to work with Thumb-2, turning it on will cause horrible things to happen, so this patch disables it for now. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for ↵Dave Martin
CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6507/1: RealView: Correct data alignment in headsmp.S for ↵Dave Martin
CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for ↵Dave Martin
Thumb-2. The 32-bit conditional branches in Thumb-2 have a shorter range (+/-512K) than their ARM counterparts (+/-32MB). The linker does not currently generate trampolines to extend the range of these Thumb-2 conditional branches, resulting in link errors when vmlinux is sufficiently large, e.g.: head.o:(.text+0x464): relocation truncated to fit: R_ARM_THM_JUMP19 This patch forces the longer-range, unconditional branch encoding by use of an explicit IT instruction. The resulting branches are triggered on the same conditions as before. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for ↵Dave Martin
CONFIG_THUMB2_KERNEL The code which makes up the zImage header intends to leave a 32-byte gap followed by a branch to the real entry point, a magic number, and a word containing the absolute entry point address. This gets messed up with with CONFIG_THUMB2_KERNEL, because the size of the initial padding NOPs changes. Instead, the header can be made fully compatible by restoring it to ARM. In the Thumb-2 case, we can replace the initial NOPs with a sequence which switches to Thumb and jumps to the real entry point. As a consequence, the zImage entry point is now always ARM, so no special magic is needed any more for the uImage rules in the Thumb-2 case. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.SDave Martin
Some instruction operand combinations are used here which are nor permitted in Thumb-2. In particular, most uses of pc as an operand are disallowed in Thumb-2, and deprecated in ARM from ARMv7 onwards. The modified code introduced by this patch should be compatible with all architecture versions >= v3, with or without CONFIG_THUMB2_KERNEL. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin
mm/proc-v7.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. In this specific case, we can achieve the desired alignment by forcing a 32-bit branch instruction using the W() macro, since the assembler location counter is already 32-bit aligned in this case. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin
kernel/head.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin
bootp/init.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNELDave Martin
Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNELDave Martin
Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6487/1: add CONFIG_CRASH_DUMP to KconfigMika Westerberg
Add CONFIG_CRASH_DUMP configuration option which is used by dump capture kernels. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6486/1: provide zero vmcore_elf64_check_arch()Mika Westerberg
Since we don't support 64-bit ELF vmcores. This also prevents the following warning: fs/proc/vmcore.c: In function 'parse_crash_elf64_headers': fs/proc/vmcore.c:502: warning: passing argument 1 of 'elf_check_arch' from incompatible pointer type Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interruptsPawel Moll
This change limits number of GIC-originating interrupts to the platform maximum (defined by NR_IRQS) while still initialising all distributor registers. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: pxa/palm: fix ifdef around gen_nand driver registrationMarek Vasut
Reported-by: Rafael Gandolfi <kaillasse91@hotmail.fr> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-30ARM: mmp2: remove not used clk_rtcJason Chagas
RTC clock will remain at 32KHz and powered on, there is no need for it at this moment. Signed-off-by: Jason Chagas <jason.chagas@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-30at91: merge all at91rm9200 defconfig in one single fileEric Benard
About all options present in each file are activated in the single file. Signed-off-by: Eric Benard <eric@eukrea.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30ARM: S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definitionYauhen Kharuzhy
Dependency on (CPU_S3C2416 is not selected) was defined as "!CPU_2416", instead of "!CPU_S3C2416". Fix it. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-11-30ARM: S3C2443: Select properly ARM core typeYauhen Kharuzhy
Select ARM920T core when compiling kernel for s3c2443. Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-11-30ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOSTYauhen Kharuzhy
Enable compilation of platform devices and initialization code used in SMDK2416 board file. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-11-30Merge branch 'rmobile/mackerel' into rmobile-latestPaul Mundt
Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-30Merge branches 'rmobile/ag5' and 'rmobile/mmcif' into rmobile-latestPaul Mundt
2010-11-30ARM: mach-shmobile: mackerel: Add USB1(Host) supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled OMAP: UART: don't resume UARTs that are not enabled.
2010-11-29ARM: cns3xxx: Fix build with CONFIG_PCI=yAnton Vorontsov
commit 6338a6aa7c082f11d55712251e14178c68bf5869 ("ARM: 6269/1: Add 'code' parameter for hook_fault_code()") breaks CNS3xxx build: CC arch/arm/mach-cns3xxx/pcie.o pcie.c: In function 'cns3xxx_pcie_init': pcie.c:373: warning: passing argument 4 of 'hook_fault_code' makes integer from pointer without a cast pcie.c:373: error: too few arguments to function 'hook_fault_code' This commit fixes the small issue. Cc: stable@kernel.org [36] Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-29[ARM] Dove: add support for CM-A510 machine.Konstantin Sinyuk
This patch adds support for CM-A510 machine Signed-off-by: Konstantin Sinyuk <kostyas@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-11-29[ARM] mv78xx: wrong cpu1 window base register addressEvgeniy Dushistov
The constant DDR_WINDOW_CPU1_BASE has wrong value. Because of that mv78xx0_mbus_dram_info is not filled properly on start, and in its turn drivers, that used mv78xx0_mbus_dram_info, in my case mv643xx_eth.c, not work on second core. According to MV76100, MV78100, and MV78200 DiscoveryTM Innovation Series CPU Family Functional Specifications address should be 0x1570. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-11-29ARM: mach-shmobile: mackerel: Add lost GPIO_FN_LCDD 18 - 23Kuninori Morimoto
RGB24 bus needs 18-23 pin Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29ARM: mach-shmobile: mackerel: Add mackerel defconfigKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29ARM: mach-shmobile: mackerel: document switch and pin modes.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29ARM: mach-shmobile: mackerel: Add LCDC supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29ARM: mach-shmobile: mackerel: Add SMSC supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29ARM: mach-shmobile: Add mackerel board supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29ARM: mach-shmobile: ag5evm: Add FSI resourcesKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-28ARM: imx: Get the silicon version from the IIM moduleDinh Nguyen
Instead of reading the silicon version from ROM, we should read the SREV register from the IIM. Freescale has dropped all support for MX51 REV1.0, only MX51 REV 2.0 and 3.0 are valid. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-27Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling. ARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocks ARM: mach-shmobile: clock-sh7372: modify error code ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642 ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disable ARM: mach-shmobile: sh7372 USB0/IIC1 MSTP fix
2010-11-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdhci: 8-bit bus width changes mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD mmc: sdio: fix nasty oops in mmc_sdio_detect mmc: omap4: hsmmc: Fix improper card detection while booting mmc: fix rmmod race for hosts using card-detection polling mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35 mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci mmc: sdhci: Properly enable SDIO IRQ wakeups mmc: ushc: Return proper error code for ushc_probe() mmc: Fix printing of card DDR type
2010-11-27Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: Fix sysdev related warning messages ARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443 ARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416 ARM: S3C64XX: fix uart clock setup for mini6410/real6410 ARM: S3C24XX: Fix wrong s3c_gpio_cfgpull ARM: S3C2410: Adapt h1940-bluetooth to gpiolib changes
2010-11-26ARM: pgtable: introduce pteval_t to represent a pte valueRussell King
This makes everywhere dealing with pte values use the same type. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: pgtable: use phys_addr_t for physical addressesRussell King
Ensure that physical addresses are typed as phys_addr_t Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: pgtable: use pXd_none_or_clear_bad() in pgd_free()Russell King
Remove knowledge of the 2-level wrapping in pgd_free(), and use the pXd_none_or_clear_bad() macros when checking the entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: pgtable: get rid of get_pgd_slow()/free_pgd_slow()Russell King
These old names are just aliases for pgd_alloc/pgd_free. Just use the new names. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: pgtable: directly pass pgd/pmd/pte to their error functionsRussell King
Rather than passing the pte value to __pte_error, pass the raw pte_t cookie instead. Do the same for pmd and pgd functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: pgtable: group pte functions togetherRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: pgtable: group pgd functions and data togetherRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: cns3xxx: Add architecture definition for EHCI/OHCI controllerMac Lin
This patch add plateform_device for EHCI and OHCI controller on CNS3XXX. Power reference count (usb_pwr_ref) is used to control enabling and disabling the single clock control for both EHCI and OHCI controller. It also removes EHCI/OHCI unused virtual address definitions. Signed-off-by: Mac Lin <mkl0301@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-26ARM: cns3xxx: Add new and export the old power management functionsMac Lin
This patch adds cns3xxx_pwr_clk_dis, and exports these power management functions that may be used by many other device drivers on CNS3XXX. Signed-off-by: Mac Lin <mkl0301@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-26ARM: cns3xxx: Make cns3xxx_pwr_soft_rst_force() to actually reset blocksAnton Vorontsov
commit 6eb5d146d4535 ("ARM: cns3xxx: Use IO memory accessors everywhere") breaks cns3xxx_pwr_soft_rst_force() function, so that it doesn't write cleared bit into the register. This patch fixes the issue by adding the necessary __raw_writel(). Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-26ARM: pgtable: move pgprot functions to one placeRussell King
Rather than scattering them throughout the file, group them together. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-15 15:30:04 +0000