summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-11-26perf, arch: Cleanup perf-pmu init vs lockup-detectorPeter Zijlstra
The perf hardware pmu got initialized at various points in the boot, some before early_initcall() some after (notably arch_initcall). The problem is that the NMI lockup detector is ran from early_initcall() and expects the hardware pmu to be present. Sanitize this by moving all architecture hardware pmu implementations to initialize at early_initcall() and move the lockup detector to an explicit initcall right after that. Cc: paulus <paulus@samba.org> Cc: davem <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290707759.2145.119.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26ARM: always build swp_emulate as ARMv7Russell King
swp_emulate is only used on ARMv7+, and includes ARMv7+ assembly instructions. Allow the assembler to accept ARMv7 instructions, but leave the compiler's code generation options alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26ARM: 6483/1: arm & sh: factorised duplicated clkdev.cJean-Christop PLAGNIOL-VILLARD
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-26Merge branch 'ftrace' of git://github.com/rabinv/linux-2.6 into devel-stableRussell King
2010-11-26Merge branch 'perf-split' of git://linux-arm.org/linux-2.6-wd into devel-stableRussell King
2010-11-26Merge branch 'for-russell' of ↵Russell King
git://codeaurora.org/quic/kernel/dwalker/linux-msm into devel-stable
2010-11-25ARM: perf: separate PMU backends into multiple filesWill Deacon
The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-25ARM: perf: encode PMU name in arm_pmu structureWill Deacon
Currently, perf uses the PMU ID as an index into a string table to look up the name of a given PMU. This patch encodes the name of a PMU directly into the arm_pmu structure so that PMU-specific code can be factored out into separate files. Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-25ARM: perf: add _init() functions to PMUsWill Deacon
In preparation for separating the PMU-specific code, this patch adds self-contained init functions to each PMU, therefore removing any PMU-specific knowledge from the PMU-agnostic init_hw_perf_events function. Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-25ARM: perf: avoid exposing internal stop function for v6 PMUWill Deacon
Unlike other pmu functions, armv6pmu_pmu_stop is not declared static. This patch adds the missing keyword. Acked-by: Jamie Iles <jamie.iles@jamieiles.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-25ARM: perf: consolidate common PMU behaviourWill Deacon
The functions for mapping PMU events (perf, cache and raw) are common between all PMU types and differ only in the data on which they operate. This patch implements common definitions of these mapping functions and changes the arm_pmu struct to hold pointers to the data which they require. This is in anticipation of separating out the PMU-specific code into separate files. Acked-by: Jamie Iles <jamie.iles@jamieiles.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-11-25Merge branch 'rmobile/mmcif' into rmobile-latestPaul Mundt
2010-11-25ARM: mach-shmobile: clock-sh73a0: modify MSTP orderKuninori Morimoto
This patch permuted clock arrays in the order of MSTP Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-25ARM: mach-shmobile: enable MMCIF DMA on ap4evbGuennadi Liakhovetski
Have to add DMA slave configuration to enable DMA for the sh7372 MMCIF controller. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-25ARM: mach-shmobile: add DMA defines for MMCIF on sh7372Guennadi Liakhovetski
Add DMA slave IDs and slave definitions for MMCIF on sh7372. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-25ARM: S5PV210: Fix sysdev related warning messagesAbhilash Kesavan
This patch fixes following warning messages when CONFIG_PM selected. In file included from arch/arm/mach-s5pv210/mach-smdkv210.c:34: arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device' declared inside parameter list arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device' declared inside parameter list In file included from arch/arm/mach-s5pv210/mach-smdkc110.c:31: arch/arm/plat-samsung/include/plat/pm.h:104: warning: 'struct sys_device' declared inside parameter list arch/arm/plat-samsung/include/plat/pm.h:104: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/plat-samsung/include/plat/pm.h:105: warning: 'struct sys_device' declared inside parameter list Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-25ARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443Abhilash Kesavan
The UART3 submask should be 0x7 (SUBSRCPND[26:24]). Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-25ARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416Abhilash Kesavan
IRQ_S3C2443_UART3 is being used as the base when it should actually be IRQ_S3C2443_RX3 on S3C2443 and S3C2416 for the UART3. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-25ARM: S3C64XX: fix uart clock setup for mini6410/real6410Darius Augulis
Don't rewrite clock config in UCON preconfigured by bootloader. No need to set 10th bit in UCON because [11:10] 2'b00 means source clock is PCLK too. If set, console does not work if bootloader has preconfigured [11:10] with 2'b00. If not set, console works with any bootloader config value (2'bxx). More information about clock setup in UCON is available in "S3C6410X RISC Microprocessor User's Manual, Revision 1.20" p. 31-13 (Chapter 31.6.2 UART CONTROL REGISTER). Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-25ARM: S3C24XX: Fix wrong s3c_gpio_cfgpullKukjin Kim
This patch fixes wrong s3c_gpio_cfgpull with s3c_gpio_setpull. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-25ARM: S3C2410: Adapt h1940-bluetooth to gpiolib changesVasily Khoruzhick
Replace in s3c_gpio_cfgpull with s3c_gpio_setpull. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-11-24arm: omap2: timer-gp: delete unused variableAaro Koskinen
Delete a redundant local variable. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-24arm: omap1: board-ams-delta: fix castAaro Koskinen
Use IOMEM() macro to get rid of the following sparse warning: arch/arm/mach-omap1/board-ams-delta.c:319:36: warning: incorrect type in initializer (different address spaces) arch/arm/mach-omap1/board-ams-delta.c:319:36: expected void [noderef] <asn:2>*membase arch/arm/mach-omap1/board-ams-delta.c:319:36: got void *<noident> Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-24arm: omap1: mbox: delete unused variableAaro Koskinen
Delete unused variable from probe(). Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-24arm: omap1: mbox: make variables staticAaro Koskinen
Make some variables static to get rid of the following warnings: arch/arm/mach-omap1/mailbox.c:136:18: warning: symbol 'mbox_dsp_info' was not declared. Should it be static? arch/arm/mach-omap1/mailbox.c:142:18: warning: symbol 'omap1_mboxes' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-24arm: omap1: make some functions staticAaro Koskinen
Make some functions static to get rid of the following sparse warnings: arch/arm/mach-omap1/mcbsp.c:177:12: warning: symbol 'omap1_mcbsp_init' was not declared. Should it be static? arch/arm/mach-omap1/mux.c:346:22: warning: symbol 'omap1_cfg_reg' was not declared. Should it be static? arch/arm/plat-omap/dma.c:177:5: warning: symbol 'omap_dma_in_1510_mode' was not declared. Should it be static? arch/arm/plat-omap/sram.c:273:12: warning: symbol 'omap1_sram_init' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-24arm: omap1: add missing includesAaro Koskinen
Add missing includes to get rid of the following sparse warnings: arch/arm/mach-omap1/devices.c:225:13: warning: symbol 'omap1_camera_init' was not declared. Should it be static? arch/arm/mach-omap1/flash.c:15:6: warning: symbol 'omap1_set_vpp' was not declared. Should it be static? arch/arm/mach-omap1/serial.c:190:6: warning: symbol 'omap_serial_wake_trigger' was not declared. Should it be static? arch/arm/mach-omap1/time.c:252:18: warning: symbol 'omap_timer' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-24OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabledPaul Walmsley
The console semaphore must be held while the OMAP UART devices are disabled, lest a console write cause an ARM abort (and a kernel crash) when the underlying console device is inaccessible. These crashes only occur when the console is on one of the OMAP internal serial ports. While this problem has been latent in the PM idle loop for some time, the crash was not triggerable with an unmodified kernel until commit 6f251e9db1093c187addc309b5f2f7fe3efd2995 ("OMAP: UART: omap_device conversions, remove implicit 8520 assumptions"). After this patch, a console write often occurs after the console UART has been disabled in the idle loop, crashing the system. Several users have encountered this bug: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg38396.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36602.html The same commit also introduced new code that disabled the UARTs during init, in omap_serial_init_port(). The kernel will also crash in this code when earlyconsole and extra debugging is enabled: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg36411.html The minimal fix for the -rc series is to hold the console semaphore while the OMAP UARTs are disabled. This is a somewhat overbroad fix, since the console may not be located on an OMAP UART, as is the case with the GPMC UART on Zoom3. While it is technically possible to determine which devices the console or earlyconsole is actually running on, it is not a trivial problem to solve, and the code to do so is not really appropriate for the -rc series. The right long-term fix is to ensure that no code outside of the OMAP serial driver can disable an OMAP UART. As I understand it, code to implement this is under development by TI. This patch is a collaboration between Paul Walmsley <paul@pwsan.com> and Tony Lindgren <tony@atomide.com>. Thanks to Ming Lei <tom.leiming@gmail.com> and Pramod <pramod.gurav@ti.com> for their feedback on earlier versions of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Pramod <pramod.gurav@ti.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jean Pihet <jean.pihet@newoldbits.com> Cc: Govindraj.R <govindraj.raja@ti.com>
2010-11-24OMAP: UART: don't resume UARTs that are not enabled.Kevin Hilman
Add additional check to omap_uart_resume_idle() so that only enabled (specifically, idle-enabled) UARTs are allowed to resume. This matches the existing check in prepare idle. Without this patch, the system will hang if a board is configured to register only some uarts instead of all of them and PM is enabled. Cc: Govindraj R. <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-25Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6482/2: Fix find_next_zero_bit and related assembly ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.context ARM: avoid annoying <4>'s in printk output SCSI: arm fas216: fix missing ';' ARM: avoid marking decompressor .stack section as having contents ARM: 6489/1: thumb2: fix incorrect optimisation in usracc ARM: 6488/1: nomadik: prevent sched_clock() wraparound ARM: 6484/1: fix compile warning in mm/init.c ARM: 6473/1: Small update to ux500 specific L2 cache code ARM: improve compiler's ability to optimize page tables mx25: fix spi device registration typo ARM i.MX27 eukrea: Fix compilation ARM i.MX spi: fix compilation for i.MX21 ARM i.MX pcm037 eet: compile fixes ARM i.MX: sdma is merged, so remove #ifdef SDMA_IS_MERGED ARM mx3fb: check for DMA engine type mach-pcm037_eet: Fix section mismatch for eet_init_devices()
2010-11-25Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: clkfwk: Build fix for non-legacy CPG changes. sh: Use GCC __builtin_prefetch() to implement prefetch(). sh: fix vsyscall compilation due to .eh_frame issue sh: avoid to flush all cache in sys_cacheflush sh: clkfwk: Disable init clk op for non-legacy clocks. sh: clkfwk: Kill off now unused algo_id in set_rate op. sh: clkfwk: Kill off unused clk_set_rate_ex().
2010-11-24ARM: 6482/2: Fix find_next_zero_bit and related assemblyJames Jones
The find_next_bit, find_first_bit, find_next_zero_bit and find_first_zero_bit functions were not properly clamping to the maxbit argument at the bit level. They were instead only checking maxbit at the byte level. To fix this, add a compare and a conditional move instruction to the end of the common bit-within-the- byte code used by all the functions and be sure not to clobber the maxbit argument before it is used. Cc: <stable@kernel.org> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: James Jones <jajones@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-24ARM: imx: Add mx53 support to common msl functions.Dinh Nguyen
Add mx53 support to cpu.c and mm.c. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM: imx: Add core definitions for MX53Dinh Nguyen
Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24mx51_babbage: Add SPI flash supportFabio Estevam
MX51 Babbage has an AT45DB321 SPI Flash connected to eCSPI1. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-24ARM i.MX27 pm: return gracefully on different socsSascha Hauer
Code called from an initcall can be maybe called for machines it's not intended for. So check for valid machines and return gracefully if an incompatible machine is found. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX51: return gracefully on different socsSascha Hauer
Code called from an initcall can be maybe called for machines it's not intended for. So check for valid machines and return gracefully if an incompatible machine is found. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX DMA: return gracefully on different socsSascha Hauer
Code called from an initcall can be maybe called for machines it's not intended for. So check for valid machines and return gracefully if an incompatible machine is found. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX51: Make CONFIG_MXC_TZIC an invisible optionSascha Hauer
There's no point showing this option to the user. The correct value will be selected anyway. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX irq: Compile avic irq code only on SoCs that need itSascha Hauer
This patch adds a Kconfig option for the avic irq controller and lets the SoCs that need it select this option. Also, as we have two irq controllers for i.MX, irq.c is not appropriate anymore, so rename it to avic.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX51 boards: Do not use PHYS_OFFSETSascha Hauer
PHYS_OFFSET may become a variable once the runtime PHYS_OFFSET patch is merged, so use MX51_PHYS_OFFSET for boot_params. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24mx51_3ds: Add esdhc supportFabio Estevam
Add support for esdhc on mx51_3ds board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx: fix iomux v3Arnaud Patard (Rtp)
Commit "ARM: i.MX IOMUX-V3 replace struct pad_desc with bitmapped cookie" (b705cb4d42e95a4a43a8945571c8613e71526c3d) introduced a typo which was preventing my efikamx to boot. This patch is fixing that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add resetArnaud Patard (Rtp)
The efikamx board is using a gpio to reset the board so add support for it Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add spi nor supportArnaud Patard (Rtp)
On efikamx, uboot is stored on a nor spi flash. Add support for it Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx51: fix gpio_4_24 and gpio_4_25 pad configurationArnaud Patard (Rtp)
s/NO_PAD_CTRL/MX51_GPIO_PAD_CTRL/ Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add support for power keyArnaud Patard (Rtp)
This patch adds support for power key button of the efika mx. It's connected on GPIO 2 31. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add leds supportArnaud Patard (Rtp)
The efika mx a 3 leds (1 blue, 1 red, 1 green) connected on GPIOS 3 13/14/15. Also, some special care is done for default trigger of blue led for mmc as the mmc host used is different between hw revisions Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24imx51: add gpio mode for csi1 {h,v}syncArnaud Patard (Rtp)
Add definitions for configuring CSI1_{H,V}SYNC as GPIO Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24efikamx: add mmc supportArnaud Patard (Rtp)
The efika mx is using a esdhc host for mmc support. Now that the sdhci has support for it, enable it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-15 20:48:43 +0000