summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-05-15ARM: EXYNOS: Modify the GIC physical address for static io-mappingChanghwan Youn
Adapt to changes in GIC physical address in rev1 of EXYNOS5. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-15ARM: EXYNOS: Add watchdog timer clock instanceThomas Abraham
Add watchdog timer clock instance for EXYNOS5 watchdog controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-15mach-ux500: crypto - core support for CRYP/HASH module.Andreas Westin
This adds the required platform data and calls to enable the CRYP/HASH driver. Signed-off-by: Andreas Westin <andreas.westin@stericsson.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu
Merge mainline to add prerequisite for ARM ux500 crypto support.
2012-05-15Merge branch 'next/cleanup-plat-s5p' into next/devel-exynos5250-1Kukjin Kim
2012-05-15ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetreeSimon Baatz
Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as currently possible in the devicetree files, including the NAND partitions. Use the partition scheme of the original firmware by default. Create a board-ib62x0.c for everything else. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15dmaengine: at_hdmac: take maxburst from slave configurationNicolas Ferre
The maxburst/chunk size was taken from the private slave DMA data structure. Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst values. The ctrla field is not needed anymore in the slave private structure nor the header constants that were located in an architecture specific directory. The at91sam9g45_devices.c file that was using this platform data is also modified to remove this now useless data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: at_hdmac: remove some at_dma_slave commentsNicolas Ferre
These comments were covering removed struct at_dma_slave fields. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15kirkwood: Add iconnect supportArnaud Patard (Rtp)
Add support for Iomega Iconnect system. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-By: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15orion/kirkwood: create a generic function for gpio led blinkingArnaud Patard (Rtp)
dns323 and (at least) iconnect platforms are using hw led blinking, so, instead of having 2 identicals .gpio_blink_set gpio-led hooks, move dns323 code into gpio.c Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-By: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15kirkwood/orion: fix orion_gpio_set_blinkArnaud Patard (Rtp)
gpio registers are for 32 gpios. Given that orion_gpio_set_blink is called directly and not through gpiolib, it needs to make sure that the pin value given to the internal functions are between 0 and 31. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-By: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdtJamie Lentin
Use devicetree to define NAND partitions. Use D-link partition scheme by default, to be vaguely compatible with their userland. Changes since last submission (V4):- * Don't add NAND support then throw it away immediately after [Grant Likely] Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15kirkwood: Allow nand to be configured via. devicetreeJamie Lentin
Add default configuration for NAND, to be enabled in your board config. Ensure clock gating is set appropriately when the NAND is enabled. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-15ARM: kirkwood: Basic support for DNS-320 and DNS-325Jamie Lentin
Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-05-14Merge branch 'renesas-kzm9g' into renesas-board-newRafael J. Wysocki
* renesas-kzm9g: ARM: mach-shmobile: Use DT_MACHINE for KZM9G
2012-05-14Merge branch 'renesas-armadillo800eva' into renesas-board-newRafael J. Wysocki
* renesas-armadillo800eva: ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
2012-05-14ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 evaMagnus Damm
Use DT_MACHINE_START() on the r8a7740 based armadillo 800 eva board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-14ARM: mach-shmobile: Use DT_MACHINE for KZM9GMagnus Damm
Use DT_MACHINE_START() on the sh73a0 based KZM9G board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-14ARM: AT91: Add ADC driver to the at91sam9g20 dtsiMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14ARM: AT91: Add ADC driver to the at91sam9x5 dtsiMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14ARM: AT91: Add ADC driver to the at91sam9g45 dtsiMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14ARM: AT91: Add the ADC clock to the sam9x5 SoC fileMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14ARM: AT91: ADC: Add support for the AT91SAM9M10G45-EK boardMaxime Ripard
This patch adds platform data for the AT91 ADC driver support for the AT91SAM9M10G45-EK board. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14ARM: AT91: Add the ADC to the sam9g20ek boardMaxime Ripard
This patch adds platform data for the AT91 ADC driver support for the AT91SAM9G20-EK board. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14Merge branch 'for-3.5/dt2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into for-next Stephen Warren <swarren@wwwdotorg.org> writes: This branch is based on the merge of the following branches from the Tegra repo, which are all already pulled into arm-soc: for-3.5/tegra30-audio for-3.5/usb-ulpi for-3.5/dt ... which are all based on for-3.5/gpio-pinmux * 'for-3.5/dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: dt: tegra: invert status=disable vs status=okay ARM: dt: tegra: consistent basic property ordering ARM: dt: tegra: sort nodes based on bus order ARM: dt: tegra: remove duplicate device_type property ARM: dt: tegra: consistenly use lower-case for hex constants ARM: dt: tegra: format regs properties consistently ARM: dt: tegra: gpio comment cleanup ARM: dt: tegra: remove unnecessary unit addresses ARM: dt: tegra: whitespace cleanup ARM: dt: tegra cardhu: fix typo in SDHCI node name ARM: dt: tegra: cardhu: register core regulator tps62361 ARM: dt: tegra30.dtsi: Add SMMU node ARM: dt: tegra20.dtsi: Add GART node ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra: Add device tree support for AHB Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'next/board-samsung' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards Kukjin Kim <kgene.kim@samsung.com> writes: As there were discussions, some exynos4 boards have been updated because current dt cannot support all features for current board files on exynos4. Note, this should be merged after next/devel-samsung because some platform devices are defined in that. * 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Add FIMC device to SMDK4X12 ARM: EXYNOS: Add MFC device to SMDK4X12 ARM: EXYNOS: Add DRM device to SMDKV310 ARM: EXYNOS: Add DRM device to Origen ARM: EXYNOS: Make BT platform data structure static in mach-origen.c file ARM: EXYNOS: Add DRM core support for NURI board ARM: EXYNOS: Add DRM core device support for Universal C210 board ARM: EXYNOS: Increase framebuffer virtual size for origen ARM: S3C64XX: Hook up new style regulator-regulator supplies on Cragganmore Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'next/cpuidle' into next/pmArnd Bergmann
No point maintaining two branches for power management Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'omap/dt-missed-3.4' into drivers/mmcArnd Bergmann
The omap/dt branch adds a few instances of mmc device nodes that need to get changed to use the common bindings. Pull that into a new branch so we can apply the patch in a single run. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'power' of git://github.com/hzhuang1/linux into next/pmArnd Bergmann
* 'power' of git://github.com/hzhuang1/linux: ARM: mmp: add pm support for pxa910 ARM: mmp: ttc_dkb: add PMIC support ARM: cache: tauros2: add disable and resume callback ARM: mm: proc-mohawk: add suspend resume for mohawk ARM: mmp: add PM support for mmp2 ARM: mmp: move XX_REG definition to addr-map.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'mmp/dt' into next/pmArnd Bergmann
The mmp power management changes are based on this branch, so pull it in as a dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dtArnd Bergmann
* 'dt' of git://github.com/hzhuang1/linux: Documentation: update docs for mmp dt ARM: dts: refresh dts file for arch mmp ARM: mmp: support pxa910 with device tree ARM: mmp: support mmp2 with device tree gpio: pxa: parse gpio from DTS file ARM: mmp: support DT in timer ARM: mmp: support DT in irq ARM: mmp: append CONFIG_MACH_MMP2_DT ARM: mmp: fix build issue on mmp with device tree Includes an update to v3-4-rc5 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'next/cleanup-plat-s3c24xx-s5p' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup2 Kukjin Kim <kgene.kim@samsung.com> writes: We can remove plat-s5p directory with this series and I think, the plat-s3c24xx can be removed next time for one plat-samsung of Samsung stuff. Note, this is including cleanup-samsung-iommu which is removing s5p iommu stuff in plat-s5p. * 'next/cleanup-plat-s3c24xx-s5p' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: merge plat-s5p into plat-samsung ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung ARM: SAMSUNG: move platform device for s5p uart into plat-samsung ARM: SAMSUNG: move hr timer for common s5p into plat-samsung ARM: SAMSUNG: move pm part for common s5p into plat-samsung ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung ARM: SAMSUNG: move clock part for common s5p into plat-samsung ARM: S3C24XX: Use common macro to define resources on dev-uart.c ARM: S3C24XX: move common clock init into common.c ARM: S3C24XX: move common power-management code to mach-s3c24xx ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c ARM: S3C24XX: move plat-s3c24xx/cpu.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'exynos/sysmmu' into next/cleanup2Arnd Bergmann
Required as a depdency for the next/cleanup-plat-s3c24xx-s5p branch Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'next/cleanup-samsung-iommu' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers * 'next/cleanup-samsung-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Change System MMU platform device definitions S5P: SYSMMU: Remove System MMU device driver Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'for-3.5/defconfig2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/defconfig * 'for-3.5/defconfig2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: update defconfig
2012-05-14ARM clps711x: Removed unused header mach/time.hAlexander Shiyan
All functions from this header already provided by common.c Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14ARM: clps711x: Added note about support EP731x CPU to KconfigAlexander Shiyan
ep7312 has been supported for a very long time, but has never been mentioned in the Kconfig file. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14ARM: clps711x: Added missing register definitionsAlexander Shiyan
This allows us to keep everything in a single place. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14ARM: clps711x: Used own subarch directory for store header fileAlexander Shiyan
There is no reason to have the clps7111.h header in a globally visible location, so move it to a place that is only visible when building for mach-clps711x. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14ARM: dt: tegra: invert status=disable vs status=okayStephen Warren
In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: consistent basic property orderingStephen Warren
Put properties in order compatible, reg, interrupts, then anything else the node has. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: sort nodes based on bus orderStephen Warren
Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: remove duplicate device_type propertyStephen Warren
It's already specified in skeleton.dtsi, included via tegra20.dtsi. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: consistenly use lower-case for hex constantsStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: format regs properties consistentlyStephen Warren
Place each reg "entry" on its own line, and wrap the whole list in <> rather than each individual entry. The convention chosen here is slightly arbitrary, but is not consistent throughout all Tegra files. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: gpio comment cleanupStephen Warren
Ensure that all Tegraa GPIO specifiers contain a comment indicating which GPIO name the number refers to. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: remove unnecessary unit addressesStephen Warren
DT node names only need to include the unit address if it's required to make the node name unique. Remove the unnecessary unit addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra: whitespace cleanupStephen Warren
Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-14ARM: dt: tegra cardhu: fix typo in SDHCI node nameStephen Warren
Cardhu's eMMC controller is on sdhci@78000600, not sdhci@78000400. Fix the typo. This roughly doubles the IO performance, since the support-8bit property actually takes effect. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: stable@kernel.org # v3.4
2012-05-14ARM: dt: tegra: cardhu: register core regulator tps62361Laxman Dewangan
Add device info for the core regulator tps62360 in tegra-cardhu dts file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: fixed node name to reflect actual device type] Signed-off-by: Stephen Warren <swarren@nvidia.com>
generated by cgit (git 2.34.1) at 2025-10-02 12:24:54 +0000