| Age | Commit message (Collapse) | Author |
|---|
|
Pull ARM fix from Russell King:
"It was noticed that one of Julien's patches contained an error, this
fixes that up"
* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc
|
|
This new property allows the number of sensors to be configured from DT
instead of being hardcoded in platform data. Use it.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
We've earlier added support to split the register address space into TM
and SROT regions. Split up the regmap address space into two for msm8974
that has a similar register layout.
Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT). This is OK since the
code doesn't really use the SROT functionality yet.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Since commit d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add
AXP813 regulator nodes") my BPIM3 no longer works at gigabit speed.
With the default setting, dldo3 is regulated at 2.9v which seems
sufficient for the PHY but the aforementioned commit drops it to 2.5V
which is insufficient. Note that this behaviour is random for all BPIM3.
Some work with 2.5V, but some don't.
Finnaly, someone from Bananapi confirmed that this regulator must be set
to 3.3V.
Fixes: d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813
regulator nodes")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
[wens@csie.org: Reworked commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer)
function blocks. Add their ipg and per clocks to the device tree.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
XU3/XU4/HC1
Add SD card write-protect pin configuration to be sure that it will be
properly pulled down to indicate write access.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Set the eMMC max-frequency to 200MHz for optimal performance on Odroid
XU3/XU4 family of boards.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
XU3/XU4/HC1
Set the SD max-frequency to 200MHz for optimal performance on Odroid
XU3/XU4/HC1 family of boards.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
From Odroid XU3/XU4/HC1 schematics the LDO13 regulator for SD2, can be
set on 1.8V or 2.8V so the minimal value should be fixed to 1.8V. This
is necessary to support UHS-I tuning (otherwise card won't be detected
during boot).
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add support for UHS-I bus speed tuning for SDR50, DDR50 and SDR104 to
Odroid XU3/XU4/HC1 family boards.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
Allow BCM63xx to compile support for reset controllers since we will
require a specific reset controller to release resets for on-chip
peripherals.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Since commit 6862fdf2201a ("ARM: samsung: Limit SAMSUNG_PM_CHECK
config option to non-Exynos platforms") s3c_pm_check_*() calls
are redundant and can be removed.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add missing clocks to SoC build-in RTC device to make it fully
operational on Exynos5250-based Arndale board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The bindings for s2mps11/s5m8767 clocks driver require a compatible for
clocks node. Parent MFD sec-core driver will also use it when
instantiating children.
The compatible is not needed for proper working because device will be
anyway created by parent MFD device. Add it for correctness.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The bindings for s2mps11/s5m8767 clocks driver require a compatible for
clocks node. Parent MFD sec-core driver will also use it when
instantiating children.
The compatible is not needed for proper working because device will be
anyway created by parent MFD device. Add it for correctness.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Since Exynos/S5Pv210 pin-controller driver is taking care about setting
the external wakeup interrupts mask, the legacy code can be removed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
|
|
Since Exynos/S5Pv210 pin-controller driver is taking care about setting
the external wakeup interrupts mask, the legacy code can be removed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
|
|
This adds low-level debug support on USART1 for STM32F4
and STM32F7.
Compiled via 'CONFIG_DEBUG_LL' and 'CONFIG_EARLY_PRINTK'.
Enabled via 'earlyprintk' in bootargs.
Signed-off-by: Gerald Baeza <gerald.baeza@st.com>
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
getuser() and putuser() (and there underscored variants) use two
strb[t]/ldrb[t] instructions when they are asked to get/put 16-bits.
This means that the read/write is not atomic even when performed to a
16-bit-aligned address.
This leads to problems with vhost: vhost uses __getuser() to read the
vring's 16-bit avail.index field, and if it happens to observe a partial
update of the index, wrong descriptors will be used which will lead to a
breakdown of the virtio communication. A similar problem exists for
__putuser() which is used to write to the vring's used.index field.
The reason these functions use strb[t]/ldrb[t] is because strht/ldrht
instructions did not exist until ARMv6T2/ARMv7. So we should be easily
able to fix this on ARMv7. Also, since all ARMv6 processors also don't
actually use the unprivileged instructions anymore for uaccess (since
CONFIG_CPU_USE_DOMAINS is not used) we can easily fix them too.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
ARMv6+ processors do not use CONFIG_CPU_USE_DOMAINS and use privileged
ldr/str instructions in copy_{from/to}_user. They are currently
unnecessarily using single ldr/str instructions and can use ldm/stm
instructions instead like memcpy does (but with appropriate fixup
tables).
This speeds up a "dd if=foo of=bar bs=32k" on a tmpfs filesystem by
about 4% on my Cortex-A9.
before:134217728 bytes (128.0MB) copied, 0.543848 seconds, 235.4MB/s
before:134217728 bytes (128.0MB) copied, 0.538610 seconds, 237.6MB/s
before:134217728 bytes (128.0MB) copied, 0.544356 seconds, 235.1MB/s
before:134217728 bytes (128.0MB) copied, 0.544364 seconds, 235.1MB/s
before:134217728 bytes (128.0MB) copied, 0.537130 seconds, 238.3MB/s
before:134217728 bytes (128.0MB) copied, 0.533443 seconds, 240.0MB/s
before:134217728 bytes (128.0MB) copied, 0.545691 seconds, 234.6MB/s
before:134217728 bytes (128.0MB) copied, 0.534695 seconds, 239.4MB/s
before:134217728 bytes (128.0MB) copied, 0.540561 seconds, 236.8MB/s
before:134217728 bytes (128.0MB) copied, 0.541025 seconds, 236.6MB/s
after:134217728 bytes (128.0MB) copied, 0.520445 seconds, 245.9MB/s
after:134217728 bytes (128.0MB) copied, 0.527846 seconds, 242.5MB/s
after:134217728 bytes (128.0MB) copied, 0.519510 seconds, 246.4MB/s
after:134217728 bytes (128.0MB) copied, 0.527231 seconds, 242.8MB/s
after:134217728 bytes (128.0MB) copied, 0.525030 seconds, 243.8MB/s
after:134217728 bytes (128.0MB) copied, 0.524236 seconds, 244.2MB/s
after:134217728 bytes (128.0MB) copied, 0.523659 seconds, 244.4MB/s
after:134217728 bytes (128.0MB) copied, 0.525018 seconds, 243.8MB/s
after:134217728 bytes (128.0MB) copied, 0.519249 seconds, 246.5MB/s
after:134217728 bytes (128.0MB) copied, 0.518527 seconds, 246.9MB/s
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The ldrd and strd instructions work on a pair of consecutive registers.
It is possible to specify either the first register in the pair, or both
registers explicitly. Let's always do the later to make things clearer.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
In big.Little systems, some CPUs require the Spectre workarounds in
paths such as the context switch, but other CPUs do not. In order
to handle these differences, we need per-CPU vtables.
We are unable to use the kernel's per-CPU variables to support this
as per-CPU is not initialised at times when we need access to the
vtables, so we have to use an array indexed by logical CPU number.
We use an array-of-pointers to avoid having function pointers in
the kernel's read/write .data section.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to
itself. It should actually be hwstate->fpinst2 that gets assigned to the
ufp_exc field.
Fixes commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 ("ARM: 8791/1:
vfp: use __copy_to_user() when saving VFP state").
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Allow the way we access members of the processor vtable to be changed
at compile time. We will need to move to per-CPU vtables to fix the
Spectre variant 2 issues on big.Little systems.
However, we have a couple of calls that do not need the vtable
treatment, and indeed cause a kernel warning due to the (later) use
of smp_processor_id(), so also introduce the PROC_TABLE macro for
these which always use CPU 0's function pointers.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Call the per-processor type check_bugs() method in the same way as we
do other per-processor functions - move the "processor." detail into
proc-fns.h.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Split out the lookup of the processor type and associated error handling
from the rest of setup_processor() - we will need to use this in the
secondary CPU bringup path for big.Little Spectre variant 2 mitigation.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Move lookup_processor_type() out of the __init section so it is callable
from (eg) the secondary startup code during hotplug.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The DSS DT node contains children that describe the DSS components
(DISPC and internal encoders). Each of those components is handled by a
platform driver, and thus needs to be backed by a platform device.
The corresponding platform devices are created in mach-omap2 code by a
call to of_platform_populate(). While this approach has worked so far,
it doesn't model the hardware architecture very well, as it creates
child devices before the parent is ready to handle them. This would be
akin to creating I2C slaves before the I2C master is available.
The task can be easily performed in the omapdss driver code instead,
simplifying mach-omap2 code. We however can't remove the mach-omap2 code
completely as the omap2fb driver still depends on it, but we can move it
to the omap2fb-specific section, where it can stay until the omap2fb
driver gets removed.
This has the added benefit of not allowing DSS components to probe
before the DSS itself, which led to runtime PM issues when the DSS probe
is deferred.
Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-2-laurent.pinchart@ideasonboard.com
|
|
Similar to commit 8f42cb7f64c7 ("ARM: dts: omap4: Add l4 interconnect
hierarchy and ti-sysc data"), let's add proper interconnect hierarchy
for l4 interconnect instances with the related ti-sysc interconnect
module data as in Documentation/devicetree/bindings/bus/ti-sysc.txt.
Using ti-sysc driver binding allows us to start dropping legacy platform
data in arch/arm/mach-omap2/omap*hwmod*data.c files later on in favor of
ti-sysc dts data.
This data is generated based on platform data from a booted system
and the interconnect acces protection registers for ranges. To avoid
regressions, we initially validate the device tree provided data
against the existing platform data on boot.
Cc: devicetree@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- A fix for the pgtable_bytes misaccounting on s390. The patch changes
common code part in regard to page table folding and adds extra
checks to mm_[inc|dec]_nr_[pmds|puds].
- Add FORCE for all build targets using if_changed
- Use non-loadable phdr for the .vmlinux.info section to avoid a
segment overlap that confuses kexec
- Cleanup the attribute definition for the diagnostic sampling
- Increase stack size for CONFIG_KASAN=y builds
- Export __node_distance to fix a build error
- Correct return code of a PMU event init function
- An update for the default configs
* tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/perf: Change CPUM_CF return code in event init function
s390: update defconfigs
s390/mm: Fix ERROR: "__node_distance" undefined!
s390/kasan: increase instrumented stack size to 64k
s390/cpum_sf: Rework attribute definition for diagnostic sampling
s390/mm: fix mis-accounting of pgtable_bytes
mm: add mm_pxd_folded checks to pgtable_bytes accounting functions
mm: introduce mm_[p4d|pud|pmd]_folded
mm: make the __PAGETABLE_PxD_FOLDED defines non-empty
s390: avoid vmlinux segments overlap
s390/vdso: add missing FORCE to build targets
s390/decompressor: add missing FORCE to build targets
|
|
Make the ARM scalar AES implementation closer to constant-time by
disabling interrupts and prefetching the tables into L1 cache. This is
feasible because due to ARM's "free" rotations, the main tables are only
1024 bytes instead of the usual 4096 used by most AES implementations.
On ARM Cortex-A7, the speed loss is only about 5%. The resulting code
is still over twice as fast as aes_ti.c. Responsiveness is potentially
a concern, but interrupts are only disabled for a single AES block.
Note that even after these changes, the implementation still isn't
necessarily guaranteed to be constant-time; see
https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion
of the many difficulties involved in writing truly constant-time AES
software. But it's valuable to make such attacks more difficult.
Much of this patch is based on patches suggested by Ard Biesheuvel.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Looks like dra7 needs optional clocks enabled for mcasp unlike
am33xx and am437x do.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Linux 4.20-rc1
|
|
|
|
While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference. Fix it by checking for uninitialized pointer before using
it in modem_pm().
Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
At the same time the AM3517 EVM was gaining WiFi support,
separate patches were introduced to move the interrupt
from HIGH to RISING. Because they overlapped, this was not
done to the AM3517-EVM. This patch fixes Kernel 4.19+
Fixes: 6bf5e3410f19 ("ARM: dts: am3517-som: Add WL127x Wifi")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
When the Torpedo was first introduced back at Kernel 4.2,
the interrupt extended flag has been set incorrectly.
It was subsequently moved, so this patch corrects Kernel
4.18+
Fixes: a38867305203 ("ARM: dts: Move move WiFi bindings to
logicpd-torpedo-37xx-devkit") # v4.18+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The MMC1 is active low, not active high. For some reason,
this worked with different combination of U-Boot and kernels,
but it's supposed to be active low and is currently broken.
Fixes: cfaa856a2510 ("ARM: dts: am3517: Add pinmuxing, CD and
WP for MMC1") #kernel 4.18+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We've already moved omap2plus_defconfig over to use 8250-omap instead of
omap-serial driver. Let's update multi_v7_defconfig too.
By default we also enable SERIAL_8250_OMAP_TTYO_FIXUP that updates the
kernel serial console to point to 8250 driver and warns about it during
the boot.
Users with ttyO[0123] in their /etc/inittab should update inittab to
to use ttyS[0123] instead.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
|
|
Add clock entry into the EMC DT node.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add interrupt entry into the EMC DT node.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The arm compiler internally interprets an inline assembly label
as an unsigned long value, not a pointer. As a result, under
CONFIG_FORTIFY_SOURCE, the address of a label has a size of 4 bytes,
which was tripping the runtime checks. Instead, we can just cast the label
(as done with the size calculations earlier).
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1639397
Reported-by: William Cohen <wcohen@redhat.com>
Fixes: 6974f0c4555e ("include/linux/string.h: add the option of fortified string.h functions")
Cc: stable@vger.kernel.org
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
In case panic() and panic() called at the same time on different CPUS.
For example:
CPU 0:
panic()
__crash_kexec
machine_crash_shutdown
crash_smp_send_stop
machine_kexec
BUG_ON(num_online_cpus() > 1);
CPU 1:
panic()
local_irq_disable
panic_smp_self_stop
If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump
fails. CPU1 can't receive the ipi irq, CPU1 will be always online.
To fix this problem, this patch split out the panic_smp_self_stop()
and add set_cpu_online(smp_processor_id(), false).
Signed-off-by: Yufen Wang <wangyufen@huawei.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Some software such as perf makes unconditional use of the special
[vectors] page which is only provided when CONFIG_KUSER_HELPERS is
enabled in the kernel.
Facilitate the debugging of such situations by printing a debug message
to the kernel log showing the task name and the faulting address.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The naked attribute is known to confuse some old gcc versions when
function arguments aren't explicitly listed as inline assembly operands
despite the gcc documentation. That resulted in commit 9a40ac86152c
("ARM: 6164/1: Add kto and kfrom to input operands list.").
Yet that commit has problems of its own by having assembly operand
constraints completely wrong. If the generated code has been OK since
then, it is due to luck rather than correctness. So this patch also
provides proper assembly operand constraints, and removes two instances
of redundant register usages in the implementation while at it.
Inspection of the generated code with this patch doesn't show any
obvious quality degradation either, so not relying on __naked at all
will make the code less fragile, and avoid some issues with clang.
The only remaining __naked instances (excluding the kprobes test cases)
are exynos_pm_power_up_setup(), tc2_pm_power_up_setup() and
cci_enable_port_for_self(. But in the first two cases, only the function
address is used by the compiler with no chance of inlining it by
mistake, and the third case is called from assembly code only. And the
fact that no stack is available when the corresponding code is executed
does warrant the __naked usage in those cases.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
If the system passes an ATAG_SERIAL, convert that into a /serial-number
node so that the system serial number will be passed through the FDT and
be present under the kernel.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The default for Kconfig options is always n, so there's no need to
explicitly state a "n" default.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
