summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2018-09-29ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodesPaul Kocialkowski
This adds nodes for the Video Engine and the associated reserved memory for the H3. Up to 96 MiB of memory are dedicated to the CMA pool. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-29ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 PlusChen-Yu Tsai
Three more variants of the Bananapi M2 Plus have been introduced. One with the H5 instead of the H3, another with the H2+ instead, and the last with the H3 but with WiFi and eMMC removed. All these variants use the same board. This patch splits out the non-SoC-specific parts of the device tree, so that they can be shared among all the variants. The original Bananapi M2 Plus has been renamed to Bananapi M2 Plus H3. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHYChen-Yu Tsai
The external RTL8211E RGMII Ethernet PHY is configured via external resistors to use the address 0x1. The 0x0 address is a broadcast address for this family of PHYs, and should not be used explicitly. Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29ARM: dts: sun8i: h3-h5: ir register size should be the whole memory blockPhilipp Rossak
The size of the register should be the size of the whole memory block, not just the registers, that are needed. Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-29ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 supportDiego Rondini
Orangepi Zero Plus 2 is an open-source single-board computer, available in two Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the H5 is already supported by sun50i-h5-orangepi-zero-plus2.dts. H3 Orangepi Zero Plus 2 has: - Quad-core Cortex-A7 - 512MB DDR3 - microSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG + power supply Signed-off-by: Diego Rondini <diego.rondini@kynetics.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-09-28Merge branch 'dt/cpu-type-rework' into dt/nextRob Herring
2018-09-28ARM: dts: am335x: Replace remaining legacy phy_id with phy-handleTony Lindgren
Looks like we still have two instances of phy_handle that did not get update by Grygorii's series. Let's replace these too with standard phy-handle. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Neeraj Dantu <dantuguf14105@gmail.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: am335x: add support for Moxa UC-2101 open platformSZ Lin (林上智)
Add support for Moxa UC-2101 open platform The UC-2101 computing platform is designed for industrial embedded data acquisition and processing applications. The features of UC-2101 are: * eMMC * SPI flash * 1x LAN * 1x RS-232/422/485 ports, software-selectable * EEPROM * TPM 2.0 * Watchdog * RTC * User gpio-keys * User LEDs * User button Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com> Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: am335x: add common file for UC-2100 seriesSZ Lin (林上智)
The UC-2100 series consists many boards with different peripheral devices and wireless modules, hence we fetch common items and create a common dtsi file to increase reusability. All boards in UC-2100 series will include this common dtsi file. Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com> Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28Merge tag 'renesas-drivers-for-v4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Renesas ARM Based SoC Drivers Updates for v4.20 * Convert to SPDX identifiers * R-Car V3M (r8a77970) and V3H (r8a77980): Document Timer Unit (TMU) bindings * RZ/G1N (r8a7744) and RZ/G1C (r8a77470) SoCs: - Document APMU and SMP enable method * RZ/G2M (r8a74a1), RZ/G1N (r8a7744) and RZ/G2E (r8a774c0) SoCs: - Add reset support - Add sysc support * RZ/G2M (r8a774a1), RZ/G2E (r8a774c0) and RZ/A2M (r7s9210) SoCs: - Add support for identifying SoC * RZ/A2M (r7s9210) SoC: - Add basic SoC setup support * tag 'renesas-drivers-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits) dt-bindings: apmu: Document r8a7744 support dt-bindings: timer: renesas: tmu: document R8A779{7|8}0 bindings dt-bindings: apmu: Document r8a77470 support soc: renesas: rcar-rst: Add support for RZ/G1N dt-bindings: reset: rcar-rst: Document r8a7744 reset module soc: renesas: rcar-sysc: Add r8a7744 support dt-bindings: power: rcar-sysc: Add r8a7744 power domain index macros dt-bindings: power: rcar-sysc: Document r8a7744 SYSC binding soc: renesas: rcar-rst: Add support for RZ/G2E dt-bindings: reset: rcar-rst: Document r8a774c0 rst soc: renesas: rcar-sysc: Add r8a774c0 support dt-bindings: power: rcar-sysc: Document r8a774c0 sysc dt-bindings: power: Add r8a774c0 SYSC power domain definitions soc: renesas: Identify RZ/G2E soc: renesas: convert to SPDX identifiers soc: renesas: rcar-rst: Add support for RZ/G2M soc: renesas: rcar-sysc: Add r8a774a1 support dt-bindings: power: Add r8a774a1 SYSC power domain definitions soc: renesas: identify RZ/A2 ARM: shmobile: Add basic RZ/A2 SoC support ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'renesas-arm-soc-for-v4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Renesas ARM Based SoC Updates for v4.20 * Rework the PMIC IRQ line quirk to use DT rather than hard coded topology * Convert to SPDX identifiers * Convert to using %pOFn instead of device_node.name * Remove the no longer needed ARCH_SHMOBILE Kconfig symbol * RZ/G1N (r8a7744) SoC: Add basic SoC and debug-ll support * R-Car H1 (r8a7779) SoC: remove unused includes * tag 'renesas-arm-soc-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Rework the PMIC IRQ line quirk ARM: debug-ll: Add support for r8a7744 ARM: shmobile: r8a7744: Basic SoC support ARM: shmobile: convert to SPDX identifiers ARM: shmobile: Convert to using %pOFn instead of device_node.name ARM: shmobile: Remove the ARCH_SHMOBILE Kconfig symbol ARM: shmobile: r8a7779: Remove unused includes Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28ARM: shmobile: use for_each_of_cpu_node iteratorRob Herring
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28ARM: topology: remove unneeded check for /cpus nodeRob Herring
Checking for "/cpus" node is not necessary as of_get_cpu_node() will fail later on anyways. The call to of_find_node_by_path() also leaks a reference. So just remove the check. Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28ARM: use for_each_of_cpu_node iteratorRob Herring
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28ARM: dts: omap5: enable OTG role for DWC3 controllerH. Nikolaus Schaller
Since SMPS10 and OTG cable detection extcon are described here, and work to enable OTG power when an OTG cable is plugged in, we can define OTG mode in the controller (which is disabled by default in omap5.dtsi). Tested on OMAP5EVM and Pyra. Suggested-by: Roger Quadros <rogerq@ti.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: dra7: Enable workaround for errata i870 in PCIe host modeVignesh R
Add ti,syscon-unaligned-access property to PCIe RC nodes to set appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for errata i870. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28ARM: dts: dra7: Fix up unaligned access setting for PCIe EPVignesh R
Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are incorrectly documented in the TRM. In fact, the bit positions are swapped. Update the DT bindings for PCIe EP to reflect the same. Fixes: d23f3839fe97 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-28Merge tag 'renesas-arm-defconfig-for-v4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Renesas ARM Based SoC Defconfig Updates for v4.20 * shmobile and multi_v7 defconfigs: - Enable recently upstreamed r8a7744 SoC - Enable FDP1 (Fine Display processor) present on R-Car Gen2 and RZ/G1 SoCs * shmobile defconfig (only): - Refresh for v4.19-rc1 - Remove soon to be deprecated SOC_CAMERA * tag 'renesas-arm-defconfig-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: defconfig: Enable r8a7744 SoC ARM: multi_v7_defconfig: Enable r8a7744 SoC ARM: multi_v7_defconfig: Enable VIDEO_RENESAS_FDP1 ARM: shmobile: defconfig: Enable VIDEO_RENESAS_FDP1 ARM: shmobile: defconfig: Refresh shmobile_defconfig for v4.19-rc1 ARM: shmobile: defconfig: Remove SOC_CAMERA Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'omap-for-v4.20/omap1-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc A series of omap1 gpio changes for ams-delta Janusz Krzysztofik has cleaned up ams-delta gpio usage along with generic gpio framework improvments. This series contains the omap1 specific clean-up for ams-delta modem and unused gpios. Note that this conflicts with the gpio-omap changes queued into an immutable gpio branch ib-omap for the gpio-omap.h header file. The merge resolution is to drop the IS_BUILTIN(CONFIG_GPIO_OMAP) section and keep the #endif tagged for __ASSEMBLER__. * tag 'omap-for-v4.20/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: ams-delta: Don't request unused GPIOs ARM: OMAP1: ams-delta-fiq: Use <linux/platform_data/gpio-omap.h> ARM: OMAP1: ams-delta: register MODEM device earlier ARM: OMAP1: ams-delta: initialize latch2 pins to safe values ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'omap-for-v4.20/soc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc SoC changes for omap variants These changes improve support for clkctrl clocks to deal with split memory ranges for clkctrl providers. And to use %pOFn instead of device_node.name. * tag 'omap-for-v4.20/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Convert to using %pOFn instead of device_node.name ARM: OMAP2+: hwmod_core: improve the support for clkctrl clocks Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28ARM: support big-endian for the virt architectureJason A. Donenfeld
This architecture, used for running in QEMU, runs just fine when compiled in big-endian mode. So enable it. This is enabled in exactly the same way that it is for other platforms (such as vexpress) that also support big-endian mode in QEMU successfully. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'renesas-arm-dt2-for-v4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.20 * RZ/G1M (r8a7743) based iWave G20D-Q7 board and camera daughter board - Move PCIe node out of common dtsi to allow reuse of the common dtsi on the iWave RZ/G1N board * RZ/G1C (r8a77470) SoC: Add I2C4, SDHI2 and SMP support * R-Car Gen1 based boards and R-Car Gen2 SoCs: - Enhance top-of-file comments to include SoC name * RZ/N1D (r9a06g032) SoC: - Correct UART0 description and add all other UARTs * tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi ARM: dts: r8a77470: Add I2C4 support ARM: dts: r8a77470: Add SDHI2 support ARM: dts: r8a77470: Add SMP support ARM: dts: R-Car Gen1 board comment update ARM: dts: Include R-Car Gen2 product name in DTSI files ARM: dts: r9a06g032: Correct UART and add all other UARTs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'tegra-for-4.20-arm-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Device tree changes for v4.20-rc1 This contains a massive amount of changes from Marcel Ziswiler for various boards by Toradex. * tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (129 commits) ARM: dts: paz00: fix wakeup gpio keycode ARM: tegra: tegra20: Fix mixed tabs-spaces indentation ARM: tegra: colibri_t20: add eval board device tree ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97 ARM: tegra: colibri_t20: get rid of fake clocks simple bus ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc ARM: tegra: colibri_t20: drop module level model and compatible ARM: tegra: colibri_t20: iris: add colibri ssp support ARM: tegra: colibri_t20: iris: simplify model and compatible properties ARM: tegra: colibri_t20: simplify model and compatible properties ARM: tegra: colibri_t20: add compatibility comment ARM: tegra: colibri_t20: annotate/move sd card detect ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip ARM: tegra: colibri_t20: add i2c-thermtrip ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor ARM: tegra: colibri_t20: iris: add dr_mode property ARM: tegra: colibri_t20: iris: add gpio wakeup key ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux into next/dtArnd Bergmann
This device-tree pxa update brings : - a couple of changes for future pxa2xx platforms - 2 fixes in RTC and I2C domain * tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux: ARM: dts: pxa: add pincontrol helpers ARM: dts: pxa: fix power i2c base address ARM: dts: pxa: fix the rtc controller ARM: dts: pxa: change serial node names Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'amlogic-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt ARM: dts: Amlogic updates for v4.20 - fix clock controller register sizes - new board: Endless Mini (EC-100) by Endless Mobile - add voltage regulators * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add stdout-path property ARM: dts: meson8b: odroidc1: enable the SAR ADC ARM: dts: meson8b: odroidc1: add the fixed voltage regulators ARM: dts: meson8b: odroidc1: add the CPU voltage regulator ARM: dts: meson8b: Add support for the Endless Mini (EC-100) ARM: dts: meson8b: add the RMII pins ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100) dt-bindings: add vendor prefix for "Endless Mobile, Inc." ARM: dts: meson8b: fix the clock controller register size ARM: dts: meson8: fix the clock controller register size Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28Merge tag 'realview-dts-v4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt Realview DTS update for v4.20: - One patch from Rob fixing SPI node names * tag 'realview-dts-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: realview: Fix SPI controller node names Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28ARM: dts: lpc32xx: Fix SPI controller node namesRob Herring
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsiBiju Das
PCIe is not populated by default on iWave RZ/G1N board. RZ/G1N board is almost identical to RZ/G1M. In order to reuse the common dtsi for both the boards, it is required to move pcie node from common dtsi to board specific dts. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: r8a77470: Add I2C4 supportFabrizio Castro
Add I2C4 support to RZ/G1C (a.k.a. r8a77470) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: r8a77470: Add SDHI2 supportFabrizio Castro
Add SoC specific device tree definitions for the SDHI2 interface. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: r8a77470: Add SMP supportFabrizio Castro
Add DT node for the Advanced Power Management Unit (APMU), add the second CPU core, and use "renesas,apmu" as "enable-method". Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: R-Car Gen1 board comment updateMagnus Damm
Include R-Car Gen1 product names for Bock-W and Marzen. The product names are taken from: Documentation/devicetree/bindings/arm/shmobile.txt Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-28ARM: dts: Include R-Car Gen2 product name in DTSI filesMagnus Damm
Improve the user friendliness of the DTS code base by including the R-Car product name in each R-Car Gen2 DTSI file. The product names are taken from: Documentation/devicetree/bindings/arm/shmobile.txt Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-27signal/arm: Use send_sig_fault where appropriateEric W. Biederman
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm: Use force_sig_fault where appropriateEric W. Biederman
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm: Push siginfo generation into arm_notify_dieEric W. Biederman
In arm_notify_die call force_sig_fault to let the generic code handle siginfo generation. This removes some boiler plate making the code easier to maintain in the long run. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27ARM: dts: add omap3-gta04a5one to MakefileH. Nikolaus Schaller
We have defined a new DTS and it should be compiled. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-09-27ARM: dts: socfpga: Fix SDRAM node address for Arria10Thor Thayer
The address in the SDRAM node was incorrect. Fix this to agree with the correct address and to match the reg definition block. Cc: stable@vger.kernel.org Fixes: 54b4a8f57848b("arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-09-27ARM: dts: realview: Fix SPI controller node namesRob Herring
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-26ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid valueBrian Masney
The following commits used IRQ_TYPE_NONE since that matched what was already in the file and I do not have access to the datasheets for these devices. After these patches were submitted, commit dcf145011400 ("ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value") changed all of these values to IRQ_TYPE_LEVEL_HIGH. This patch corrects the IRQ type for these two commits: commit bd9392507588 ("ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity") commit fe8d81fe7d9a ("ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515") Prior to these patches, I was having issues with the bmp280 sensor returning temperature / pressure skipped errors, however these errors have gone away with these patches. Patches were tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-26ARM: dts: paz00: fix wakeup gpio keycodeMarc Dietrich
The power key is controlled solely by the EC, which only tiggeres this gpio after wakeup. Fixes immediately return to suspend after wake from LP1. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26Merge tag 'zynq-soc-for-v4.20' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
next/soc ARM: Xilinx Zynq SoC patches for v4.20 - Convert to using %pOFn instead of device_node.name in slcr driver * tag 'zynq-soc-for-v4.20' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Convert to using %pOFn instead of device_node.name Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-26Merge tag 'zynq-dt-for-v4.20' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
next/dt ARM: dts: zynq: DT changes for v4.20 - Fix DTS spi/i2c warnings for zc702/zc770 boards Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-26ARM: tegra: tegra20: Fix mixed tabs-spaces indentationKrzysztof Kozlowski
Fix indentation and alignment when spaces were used instead of tabs. This fixes checkpatch errors like: ERROR: code indent should use tabs where possible #306: FILE: arch/arm/boot/dts/tegra20-paz00.dts:306: +^I^I <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;$ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: colibri_t20: add eval board device treeMarcel Ziswiler
Add an evaluation board device tree more in-line with all our other device trees. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97Marcel Ziswiler
Rename ac97 label to tegra_ac97 to be more in-line with the device tree binding documentation. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: colibri_t20: get rid of fake clocks simple busMarcel Ziswiler
Get rid of the fake clocks simple bus and use node names as per the actual schematics. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic labelMarcel Ziswiler
Rename tps6586x@34 to pmic@34 and drop the unused pmic label. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: colibri_t20: iris: drop unused i2c_ddc labelMarcel Ziswiler
Drop unused i2c_ddc label. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-09-26ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddcMarcel Ziswiler
Rename i2c_ddc to hdmi_ddc to be more in-line with other device trees. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-14 20:11:19 +0000