summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2014-11-19ARM: at91/dt: at91sam9g45: add ISI nodeBoris Brezillon
Add ISI (Image Sensor Interface) DT node + pinctrl definition. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: enable the RTT block on the at91sam9m10g45ek boardBoris Brezillon
Enable the RTT and GPBR devices and specify the general purpose register used to store the current time. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: enable the RTT block on the sam9g20ek boardBoris Brezillon
Enable the RTT and GPBR devices and specify the general purpose register used to store the current time. Enable wakeup on RTT event on the shutdown controller device. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add GPBR nodesBoris Brezillon
Add GPBR (General Purpose Block Backup Registers) nodes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: add RTT nodes to at91 dtsisBoris Brezillon
at91sam926x, at91sam9g45 and at91sam9rl SoCs all have at least one RTT block. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: at91sam9rl: add rtcAlexandre Belloni
Add rtc support to the at91sam9rl dtsi file. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91: fix GPLv2 wordingNicolas Ferre
During the submission of these new sama5d4 files, the GPL notice mentioned the device tree as a library, which is not really accurate. Fix all these library mentions to reflect the fact that it's actually just a file. Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19Merge tag 'sunxi-fixes-for-3.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner fixes for 3.18" from Maxime Ripard: A fix for the A31 dma controller that requires the AHB clock to be parented to PLL6 in order to operate. * tag 'sunxi-fixes-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19ARM: at91/dt: sama5d4: add DMA supportLudovic Desroches
Add DMA controllers and device configurations. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/dt: sama5d4: use macro instead of numeric valueLudovic Desroches
There is a macro for the irq type. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19Merge branch 'at91-3.19-dt' into at91-3.19-dt2Nicolas Ferre
2014-11-19ARM: at91: remove at91sam9260/at91sam9g20 legacy board supportNicolas Ferre
Second part of at91sam9260/at91sam9g20 legacy !DT removal. This is the core !DT support removal for these two Atmel SoCs. Use the Device Tree for running this board with newer kernels. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91: remove at91sam9260/at91sam9g20 legacy boards filesNicolas Ferre
Remove old board files that use at91sam9260 or at91sam9g20 Atmel SoCs. The device tree is mature on these SoCs. It must be used now. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91: remove at91sam9263 legacy board supportNicolas Ferre
Remove legacy support for at91sam9263 boards. This include board files removal plus all legacy code for non DT boards support. Use the Device Tree for running this board with newer kernels. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: at91/at91sam9g45: remove useless header fileNicolas Ferre
Remove this useless cpu.h header file forgotten during the !DT support removal. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19ARM: dts: Explicitly set dr_mode on exynos5250-snowSjoerd Simons
Explicitly set the dr_mode for the dwc3 controller on the Snow board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-19ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device treeYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device treeYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device treeYoshifumi Hosoya
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a7794: Add SGX clock to device treeKouei Abe
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: add Volume Ramp usage on commentKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: add Volume Ramp usage on commentKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a7791: add DMA nodes for IICWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a7790: add DMA nodes for IICWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: kzm9g-reference dts: Add labels for the LEDsGeert Uytterhoeven
The LEDs on the kzm9g board are labeled using upper-case characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch dts: Add labels for the LEDsGeert Uytterhoeven
The LEDs on the koelsch board are labeled using upper-case characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible propertiesGeert Uytterhoeven
The IIC nodes used the generic compatible properties only. This causes the driver to fail when using Standard Speed, as the operational clock is driven by the 104 MHz HP clock: i2c-sh_mobile e6820000.i2c: timing values out of range: L/H=0x208/0x1bf i2c-sh_mobile: probe of e6820000.i2c failed with error -22 Add the SoC-specific compatible property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible propertiesGeert Uytterhoeven
The IIC nodes used the generic compatible properties only. This may cause the driver to fail when using Standard Speed on IIC masters where the operational clock is driven by the 130 MHz HP clock. Add the SoC-specific compatible property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support via DVC on DTSKuninori Morimoto
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support via SRC on DTSKuninori Morimoto
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTSKuninori Morimoto
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support on DTSKuninori Morimoto
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound PIO support on DTSKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: fixup I2C2 clock frequencyKuninori Morimoto
Current Koelsch I2C2 has 400kHz settings, but, ak4643 audio codec chip which is connected to I2C2 can't work such frequency. Fixup I2C2 clock frequency to 100kHz. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support via DVC on DTSKuninori Morimoto
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support via SRC on DTSKuninori Morimoto
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support via BUSIF on DTSKuninori Morimoto
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support on DTSKuninori Morimoto
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound PIO support on DTSKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: fixup IIC2 clock frequencyKuninori Morimoto
Current Lager IIC2 is using default clock frequency, but, ak4643 audio codec chip needs 100kHz This patch clarifies IIC2 clock frequency as 100kHz. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-18ARM: dts: berlin: enable USB on the Google ChromecastSebastian Hesselbarth
Enable usb1 on Google Chromecast which is connected to micro-USB plug used for external power supply, too. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: dts: berlin: add BG2CD nodes for USB supportSebastian Hesselbarth
Adds nodes describing the Marvell Berlin BG2CD USB PHY and USB. The BG2CD SoC has 2 USB ChipIdea controllers, with usb0 host-only and usb1 dual-role capable. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: dts: Berlin: enable USB on the BG2Q DMPAntoine Tenart
Enable the 2 available USB PHY and USB nodes on the Marvell Berlin BG2Q DMP. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: dts: berlin: add BG2Q nodes for USB supportAntoine Tenart
Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q SoC has 3 USB host controller, compatible with ChipIdea. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: berlin: do not select RESET_CONTROLLERAntoine Tenart
RESET_CONTROLLER is meant to be user-selectable. To respect that, do not select it automatically when using ARCH_BERLIN. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: dts: meson: add I2C controller nodesBeniamino Galvani
Add nodes for I2C controllers A,B,AO, which are available in both Meson6 and Meson8. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Carlo Caione <carlo@caione.org>
2014-11-18ARM: common: edma: add suspend resume hookDaniel Mack
This patch makes the edma driver resume correctly after suspend. Tested on an AM33xx platform with cyclic audio streams and omap_hsmmc. All information can be reconstructed by already known runtime information. As we now use some functions that were previously only used from __init context, annotations had to be dropped. [nm@ti.com: added error handling for runtime + suspend_late/early_resume] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Daniel Mack <zonque@gmail.com> Tested-by: Joel Fernandes <joelf@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> [nsekhar@ti.com: remove unneeded pm_runtime_get_sync() from resume] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: davinci: Remove redundant castsRasmus Villemoes
These casts to char* are unnecessary and slightly confusing, since both operands actually have type const char*. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: davinci: Use standard logging stylesJoe Perches
Convert printks to pr_<level> and pr_warning to pr_warn. Other miscellanea: o Coalesce formats o Realign arguments o Use %s, __func__ instead of embedded function names o Add pr_fmt to mityomapl138 and mux Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: meson: DTS: enable L2 cacheBeniamino Galvani
This enables the L2 cache controller available in Amlogic SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org>
generated by cgit (git 2.34.1) at 2025-09-14 06:06:31 +0000