summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2021-05-23ARM: imx6q: remove part of ar8031_phy_fixup()Oleksij Rempel
This part of this fixup is overwritten by at803x_config_init() in drivers/net/phy/at803x.c. No additional devicetree fixes are needed. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: imx6q: remove PHY fixup for KSZ9031Oleksij Rempel
Starting with: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the micrel phy driver started respecting phy-mode for the KSZ9031 PHY. At least with kernel v5.8 configuration provided by this fixup was overwritten by the micrel driver. This fixup was providing following configuration: RX path: 2.58ns delay rx -0.42 (left shift) + rx_clk +0.96ns (right shift) = 1,38 + 1,2 internal RX delay = 2.58ns TX path: 0.96ns delay tx (no delay) + tx_clk 0.96ns (right shift) = 0.96ns This configuration is outside of the recommended RGMII clock skew delays and about in the middle of: rgmii-idrx and rgmii-id Since most embedded systems do not have enough place to introduce significant clock skew, rgmii-id is the way to go. In case this patch breaks network functionality on your system, build kernel with enabled MICREL_PHY. If it is still not working then try following device tree options: 1. Set (or change) phy-mode in DT to: phy-mode = "rgmii-id"; This actives internal delay for both RX and TX. 1. Set (or change) phy-mode in DT to: phy-mode = "rgmii-idrx"; This actives internal delay for RX only. 3. Use following DT properties: phy-mode = "rgmii"; txen-skew-psec = <0>; rxdv-skew-psec = <0>; rxd0-skew-psec = <0>; rxd1-skew-psec = <0>; rxd2-skew-psec = <0>; rxd3-skew-psec = <0>; rxc-skew-psec = <1860>; txc-skew-psec = <1860>; This activates the internal delays for RX and TX, with the value as the fixup that is removed in this patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE valueOleksij Rempel
Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-IDOleksij Rempel
Latest kernel is actually using phy-mode property, so set proper value to make fec interface work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: imx: pm-imx27: Include "common.h"Fabio Estevam
Since commit 879c0e5e0ac7 ("ARM: imx: Remove i.MX27 board files") the following W=1 build warning is seen: arch/arm/mach-imx/pm-imx27.c:40:13: warning: no previous prototype for 'imx27_pm_init' [-Wmissing-prototypes] Fix it by including the "common.h" header file, which contains the prototype for imx27_pm_init(). Fixes: 879c0e5e0ac7 ("ARM: imx: Remove i.MX27 board files") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: dts: imx6qdl-sabresd: Configure the gpio for hp detectShengjiu Wang
Configure the gpio for hp detect for wm8962 sound card Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: dts: imx6qdl-sabresd: Add asrc support for wm8962 sound cardShengjiu Wang
Add asrc support for wm8962 sound card. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board supportDillon Min
The DaSheng Com-9xx is and ARM based signle board computer (SBC) featuring: - i.MX6Q - 2GiB LPDDR3 DRAM - 8GiB eMMC 5.0 FLASH - 4MiB SPI Flash - USB 2.0 Host/Device - Multiple multi-protocol RS232/RS485 Serial ports - microSD socket - 5V DC power input - HDMI1.4a,1080p@60 - RGMIIx1 Gigabit Ethernet - CSI0x1, connect with ov2659 Signed-off-by: Dillon Min <dillon.minfei@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-23ARM: dts: imx6dl-yapp4: Use aliases to set custom MMC device indexesMichal Vokáč
Until commit fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") was introduced, our usdhc3 and usdhc4 devices were enumerated as mmc0 and mmc1. The mmc1 device is used to boot/update the board and its name must be fixed. With the referenced commit, aliases from imx6qdl.dtsi took effect. Override the aliases to get back the original device indexes. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-22ARM: dts: imx7d-sdb: Add HDMI audio sound cardShengjiu Wang
Add HDMI audio sound card, the interface is sii902x. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-22ARM: dts: imx6ul-14x14-evk: Switch to fsl-asoc-card sound cardShengjiu Wang
There is issue with simple sound card, the simple sound card can't configure the pll of codec. [ 115.352669] wm8960 1-001a: failed to configure clock [ 115.358843] wm8960 1-001a: ASoC: error at snd_soc_dai_hw_params on wm8960-hifi: -22 So Switch to fsl-asoc-card and the fsl-asoc-card can support asrc module as front-end component. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-22ARM: dts: imx28: Add DTS description of imx28 based XEA boardLukasz Majewski
This patch adds DTS definition of the imx278 based XEA board. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-05-22ARM: dts: gemini: remove xxx-cells from displayCorentin Labbe
dtb_check complains about #address-cells and #size-cells, so lets remove them. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-22ARM: dts: gemini-dlink-dir-685: Remove address from display portCorentin Labbe
The address and reg adds no value to the port node, remove them. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-22ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2cCorentin Labbe
gemini-dlink-dir-685.dt.yaml: gpio-i2c: $nodename:0: 'gpio-i2c' does not match '^i2c(@.*)?' >From schema: /usr/src/linux-next/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-22ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2cCorentin Labbe
This fixes dtcheck warning: arch/arm/boot/dts/gemini-dlink-dns-313.dt.yaml: gpio-i2c: $nodename:0: 'gpio-i2c' does not match '^i2c(@.*)?' Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-21ARM: dts: Fix up the IXP4xx ethernet nodesLinus Walleij
All of IXP4xx SoCs has an EthA at 0xc800c000 so move this from the IXP[56]x to the IXP4xx DTSI. Then add the second ethernet port on the Cambria GW2358-4 on EthA. Reported-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-21usb: isp1760: use dr_mode bindingRui Miguel Silva
There is already a binding to describe the dual role mode (dr_mode), use that instead of defining a new one (port1-otg). Update driver code and devicetree files that use that port1-otg binding. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Link: https://lore.kernel.org/r/20210513084717.2487366-7-rui.silva@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21ARM: dts: osd3358-sm-red: group in the same phandle all its propertiesDario Binacchi
Having a single phandle reference for rtc0, mmc0 and am335x_pinmux makes the DTS well-ordered and therefore more readable. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-21ARM: dts: dra76-evm: remove ov5640Tomi Valkeinen
DRA76 EVM boards are not shipped with OV5640 sensor module, it is a separate purchase. OV5640 module is also just one of the possible sensors or capture boards you can connect. However, for some reason, OV5640 has been added to the board dts file, making it cumbersome to use other sensors. Remove the OV5640 from the dts file so that it is easy to use other sensors via DT overlays. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-21ARM: omap2plus_defconfig: Add LP5523 LED driverSicelo A. Mhlongo
The Nokia N900 has an LP5523 driving the RGB LED and the 6 keyboard LEDS. Enable support for it in omap2plus_defconfig. Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-21ARM: omap2plus_defconfig: Add WL1251 and WEXT modulesSicelo A. Mhlongo
The Nokia N900 uses a TI WL1251 chip for WiFi. Enable support for it as a loadable module. In order to be usable and connect to networks, it needs wireless extensions, so enable WEXT support in the kernel. Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-21ARM: OMAP2+: remove omap2_set_globals_control()Dario Binacchi
The function is no longer used, so let's remove it. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-21ARM: OMAP2+: CM: remove omap2_set_globals_cm()Dario Binacchi
The function is no longer used, so let's remove it. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-21ARM: OMAP1: Remove leading spaces in KconfigJuerg Haefliger
Remove leading spaces before tabs in Kconfig file(s) by running the following command: $ find arch/arm/mach-omap1 -name 'Kconfig*' | \ xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-20Merge tag 'arm-soc-fixes-5.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Only a small number of fixes so far, including some that I had applied during the merge window, so this is based on the original merge of the other branches. - The largest change is a fix for a reference counting bug in the AMD TEE driver. - Neil Armstrong now co-maintains Amlogic SoC support - Two build warning fixes for renesas device tree files - A sign expansion bug for optee - A DT binding fix for a mismerge" * tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: npcm: wpcm450: select interrupt controller driver MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer tee: amdtee: unload TA only when its refcount becomes 0 dt-bindings: nvmem: mediatek: remove duplicate mt8192 line firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle firmware: arm_scpi: Prevent the ternary sign expansion bug arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Fix CSI40 ports
2021-05-20Merge tag 'quota_for_v5.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota fixes from Jan Kara: "The most important part in the pull is disablement of the new syscall quotactl_path() which was added in rc1. The reason is some people at LWN discussion pointed out dirfd would be useful for this path based syscall and Christian Brauner agreed. Without dirfd it may be indeed problematic for containers. So let's just disable the syscall for now when it doesn't have users yet so that we have more time to mull over how to best specify the filesystem we want to work on" * tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Disable quotactl_path syscall quota: Use 'hlist_for_each_entry' to simplify code
2021-05-19media: ARM: dts: sama5d4: enable Hantro G1 VDECEmil Velikov
Add the SAMA5D4 VDEC module which comprises Hantro G1 video decoder core. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-18ARM: dts: gemini: convert obsolete SPI propertiesCorentin Labbe
gpio-xxx are obsoletes properties, convert them to xxx-gpios. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: sun8i: r40: Add timer nodeJernej Skrabec
Allwinner R40 has a timer. Add a node for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210510163647.2731675-1-jernej.skrabec@gmail.com
2021-05-18ARM: dts: sun8i: V3: add I2S interface to V3 dtsTobias Schramm
The Allwinner V3 SoC features an I2S interface. The I2S peripheral is identical to that in the Allwinner H3 SoC. This commit adds it to the Allwinner V3 dts. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-8-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: V3: add codec analog frontend to V3 dtsTobias Schramm
The Allwinner V3 SoC has a different analog codec frontend than the V3s SoC. The frontend used on the V3 SoC is compatible with the on used in the Allwinner H3 SoC. This patch adds the corresponding node to the Allwinner V3 dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-6-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dtsTobias Schramm
The Allwinner V3s and V3 SoCs feature an integrated analog audio codec. Additionally both have an analog frontend with mixers and amplifiers for the codec. This commit adds both, the analog codec and its frontend to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-4-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMATobias Schramm
This commit adds DMA properties to all peripherals supporting DMA on the Allwinner V3s, enabling accelerated data transfer to them. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-3-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add DMA controller to v3s dtsTobias Schramm
The Allwinner V3s and V3 feature a DMA controller. This commit adds it to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210514134405.2097464-2-t.schramm@manjaro.org
2021-05-18ARM: dts: sun8i: v3s: add pwm controller to v3s dtsTobias Schramm
The Allwinner V3s and V3 SoCs feature a pwm controller identical to the one used in the Allwinner A20. This commit adds it to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210513203527.2072090-3-t.schramm@manjaro.org
2021-05-18ARM: dts: href: Mount matrices for TVK R2Linus Walleij
This adds the proper mounting matrices for the TVK R2 board. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: npcm: wpcm450: select interrupt controller driverJonathan Neuschäfer
The interrupt controller driver is necessary in order to have a functioning Linux system on WPCM450. Select it in mach-npcm/Kconfig. Fixes: ece3fe93e8f4 ("ARM: npcm: Introduce Nuvoton WPCM450 SoC") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210513165627.1767093-1-j.neuschaefer@gmx.net Link: https://lore.kernel.org/r/20210518071514.604492-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-05-18ARM: dts: ux500: Fix some compatible stringsLinus Walleij
The Golden and Skomer phones have BCM4334 WLAN+BT chips, so make the compatible strings reflect the new available bindings for these. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: OMAP2+: Fix build warning when mmc_omap is not builtYongqiang Liu
GCC reports the following warning with W=1: arch/arm/mach-omap2/board-n8x0.c:325:19: warning: variable 'index' set but not used [-Wunused-but-set-variable] 325 | int bit, *openp, index; | ^~~~~ Fix this by moving CONFIG_MMC_OMAP to cover the rest codes in the n8x0_mmc_callback(). Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table functionMaciej Falkowski
The gpiod table was added without any usage making it unused as reported by Clang compilation from omap1_defconfig on linux-next: arch/arm/mach-omap1/board-h2.c:347:34: warning: unused variable 'isp1301_gpiod_table' [-Wunused-variable] static struct gpiod_lookup_table isp1301_gpiod_table = { ^ 1 warning generated. The patch adds the missing gpiod_add_lookup_table() function. Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com> Fixes: f3ef38160e3d ("usb: isp1301-omap: Convert to use GPIO descriptors") Link: https://github.com/ClangBuiltLinux/linux/issues/1325 Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18ARM: OMAP1: Fix use of possibly uninitialized irq variableMaciej Falkowski
The current control flow of IRQ number assignment to `irq` variable allows a request of IRQ of unspecified value, generating a warning under Clang compilation with omap1_defconfig on linux-next: arch/arm/mach-omap1/pm.c:656:11: warning: variable 'irq' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~ ./arch/arm/mach-omap1/include/mach/soc.h:123:30: note: expanded from macro 'cpu_is_omap16xx' ^~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:658:18: note: uninitialized use occurs here if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", ^~~ arch/arm/mach-omap1/pm.c:656:7: note: remove the 'if' if its condition is always true else if (cpu_is_omap16xx()) ^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-omap1/pm.c:611:9: note: initialize the variable 'irq' to silence this warning int irq; ^ = 0 1 warning generated. The patch provides a default value to the `irq` variable along with a validity check. Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1324 Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18ARM: dts: ux500: Drop drdy pin assignment from magnetometerLinus Walleij
This magnetometer can not select which line provided the outgoing IRQ so drop it, the DT bindings will complain too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Fix orientation of accelerometerLinus Walleij
This adds a mounting matrix to the accelerometer on the TVK1281618 R3. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Rename gpio-controller nodeSebastian Reichel
Rename the AB8500 gpio controller node from ab8500-gpio to ab8500-gpiocontroller, since -gpio is a common suffix for gpio consumers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-18ARM: dts: ux500: Fix interrupt cellsSebastian Reichel
Fix interrupt cells in DT AB8500/AB8505 source files. The compiled DTB files will stay the same. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-17Merge tag 'irqchip-fixes-5.13-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix PXA Mainstone CPLD irq allocation in legacy mode - Restrict the Apple AIC controller to the Apple platform - Remove a few supperfluous messages on devm_ioremap_resource() failure Link: https://lore.kernel.org/r/20210516122217.13234-1-maz@kernel.org
2021-05-17quota: Disable quotactl_path syscallJan Kara
In commit fa8b90070a80 ("quota: wire up quotactl_path") we have wired up new quotactl_path syscall. However some people in LWN discussion have objected that the path based syscall is missing dirfd and flags argument which is mostly standard for contemporary path based syscalls. Indeed they have a point and after a discussion with Christian Brauner and Sascha Hauer I've decided to disable the syscall for now and update its API. Since there is no userspace currently using that syscall and it hasn't been released in any major release, we should be fine. CC: Christian Brauner <christian.brauner@ubuntu.com> CC: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/lkml/20210512153621.n5u43jsytbik4yze@wittgenstein Signed-off-by: Jan Kara <jack@suse.cz>
2021-05-17ARM: shmobile: defconfig: Refresh for v5.13-rc1Geert Uytterhoeven
Refresh the defconfig for Renesas ARM systems: - Drop CONFIG_RESET_CONTROLLER=y (auto-enabled since commit b4d86f37eacb7246 ("mmc: renesas_sdhi: do hard reset if possible")). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/debe6340e9deb2f13f908238f27b62ed7b6005a0.1620806548.git.geert+renesas@glider.be
2021-05-15ARM: dts: rockchip: move and restyle grf nodes rk3066/rk3188Johan Jonker
With grf.txt converted to YAML a lot of compatibles did not have 'simple-mfd' added in the old binding. That implies that if you have child nodes they need to be documented. Make the new layout fit for rk3066/rk3188, move and restyle the grf nodes. Remove rockchip,grf from usbphy node. Add "#phy-cells", because it is a required property by phy-provider.yaml With the conversion of syscon.yaml minItems for compatibles was set to 2. Current Rockchip rk3xxx.dtsi file only uses "syscon" for the grf registers. Add "syscon", "simple-mfd" compatible for rk3066/rk3188 to reduce notifications produced with: make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/syscon.yaml Changed compatibles: "rockchip,rk3066-grf", "syscon", "simple-mfd" "rockchip,rk3188-grf", "syscon", "simple-mfd" Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210512122346.9463-4-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit (git 2.34.1) at 2025-09-14 15:32:56 +0000