summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap5 mcpdmTony Lindgren
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap5 dmicTony Lindgren
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap4 mcpdmTony Lindgren
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap4 dmicTony Lindgren
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for omap4 aessTony Lindgren
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop legacy platform data for am4 qspiTony Lindgren
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for dra7 desTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 desTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for dra7 aesTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 aesTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am3 aesTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for dra7 shamTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Similar to am3, I could not find any documentation for the sysc register on this one, but it seems to work just fine based on "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 shamTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Similar to am3, I could not find any documentation for the sysc register on this one, but it seems to work just fine based on "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am3 shamTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. I could not find any documentation for the sysc register on this one, but it seems to work just fine with "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for am4 qspiTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17dmaengine: ti: omap-dma: Add device tree match data and use it for cpu_pmTony Lindgren
With old DMA code disabled for handling DMA requests for device tree based SoCs, we can move omap3 specific context save and restore to the dmaengine driver. Let's do this by adding cpu_pm notifier handling to save and restore context, and enable it based on device tree match data. This way we can use the match data later to configure more SoC specific features later on too. Note that we only clear the channels in use while the platform code also clears reserved channels 0 and 1 on high-security SoCs. Based on testing on n900, this is not needed though and the system idles just fine. With the dmaengine driver handling context save and restore, we must now remove the old custom calls for context save and restore. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Configure dma_plat_info directly and drop dma_dev_attrTony Lindgren
Let's prepare things for passing dma_plat_info to the dmaengine driver in device tree auxdata. To do that, we want to configure dma_plat_info directly. And we can also drop the related dma_dev_attr data. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Configure sdma capabilities directlyTony Lindgren
Only earlier SoCs need to be checked for this, all SoCs starting with omap3630 have CCDN register. This way we get closer to removing the need to ioremap sdma registers in the platform code. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop sdma interrupt handling for mach-omap2Tony Lindgren
All device tree probing omap SoCs only have device drivers that are using Linux dmaengine API with the IRQENABLE_L1 interrupts. Only omap1 is still using old legacy dma. This means we can remove the legacy sdma interrupt handling for IRQENABLE_L0, and only rely on the dmaengine driver using IRQENABLE_L1. The legacy code still allocates the channels, but that will be deal with in the following patches. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: OMAP2+: Drop unused sdma functionsTony Lindgren
We still have lots of legacy code for sdma, but some of it is now unused. To simplify phasing out the old legacy sdma code, let's first remove all currently unused functions: omap_enable_dma_irq omap_set_dma_write_mode omap_set_dma_params omap_dma_link_lch omap_set_dma_callback omap_dma_set_global_params And with this, omap_dma_set_global_params now becomes static. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for omap3 sdmaTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that we want to use separate compatible for omap34xx and omap36xx so let's do that here too while at it. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: Configure interconnect target module for omap2 sdmaTony Lindgren
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that we want to use separate compatible for omap2420 and omap2430 so let's do that here too while at it. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-17ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarityMarek Szyprowski
Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-17ARM: dts: aspeed: Add SD card for VesninIvan Mikhaylov
Presence signal is inverted for vesnin boards, 'cd-inverted' added for invertion signal enablement. Vesnin BMC uses microSD, there is no WP switch, 'disable-wp' is used for this purpose. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: yamp: Delete no-hw-checksumTao Ren
Ftgmac100's checksum issue has been fixed by commit 88824e3bf29a ("net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum") so this property is no longer required. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: netbmc: Delete no-hw-checksumTao Ren
The ftgmac100's checksum issue has been fixed by commit 88824e3bf29a ("net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum") so this property is no longer required Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: AST2400 disables hw checksumJoel Stanley
There is no need to specify this property in the device tree as the AST2400 does not have working hardware checksum and disables it in the driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: ibm-power9-dual: Add a unit address for OCC nodesAndrew Jeffery
These temporarily have a unit address until userspace is fixed up as noted in comments elsewhere in the dtsi. Fixes the following warning: arch/arm/boot/dts/ibm-power9-dual.dtsi:89.18-91.6: Warning (unit_address_vs_reg): /gpio-fsi/cfam@0,0/sbefifo@2400/occ: node has a reg or ranges property, but no unit name arch/arm/boot/dts/ibm-power9-dual.dtsi:190.18-192.6: Warning (unit_address_vs_reg): /gpio-fsi/cfam@0,0/hub@3400/cfam@1,0/sbefifo@2400/occ: node has a reg or ranges property, but no unit name Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g6: Cleanup watchdog unit addressAndrew Jeffery
arch/arm/boot/dts/aspeed-g6.dtsi:204.28-208.6: Warning (simple_bus_reg): /ahb/apb/watchdog@1e7850C0: simple-bus unit address format error, expected "1e7850c0" Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g5: Sort LPC child nodes by unit addressAndrew Jeffery
Lets try to maintain some sort of sanity. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: Add reg hints to syscon childrenAndrew Jeffery
Fixes the following warnings: arch/arm/boot/dts/aspeed-g5.dtsi:209.28-226.6: Warning (avoid_unnecessary_addr_size): /ahb/apb/syscon@1e6e2000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/boot/dts/aspeed-g4.dtsi:156.28-172.6: Warning (avoid_unnecessary_addr_size): /ahb/apb/syscon@1e6e2000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed: Cleanup lpc-ctrl and snoop regsAndrew Jeffery
Fix the following warning: arch/arm/boot/dts/aspeed-g5.dtsi:409.27-414.8: Warning (unique_unit_address): /ahb/apb/lpc@1e789000/lpc-host@80/lpc-ctrl@0: duplicate unit-address (also used in node /ahb/apb/lpc@1e789000/lpc-host@80/lpc-snoop@0) Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: witherspoon: Cleanup gpio-keys-polled propertiesAndrew Jeffery
dtbs_check gave the following warning: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: swift: Cleanup gpio-keys-polled propertiesAndrew Jeffery
dtbs_check gave the following warning: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Cc: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: fp5280g2: Cleanup gpio-keys-polled propertiesAndrew Jeffery
dtbs_check gave the following warning: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Cc: John Wang <wangzqbj@inspur.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Tested-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: vesnin: Add unit address for memory nodeAndrew Jeffery
Fixes the following warnings: arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dt.yaml: /: memory: False schema does not allow {'reg': [[1073741824, 536870912]]} arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dt.yaml: memory: 'device_type' is a required property Cc: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g5: Use recommended generic node name for SDMCAndrew Jeffery
The EDAC is a sub-function of the SDRAM Memory Controller. Rename the node to the appropriate generic node name. Cc: Stefan M Schaeckeler <sschaeck@cisco.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-17ARM: dts: aspeed-g5: Move EDAC node to APBAndrew Jeffery
Previously the register interface was not attached to any internal bus, which is not correct - it lives on the APB. Cc: Stefan M Schaeckeler <sschaeck@cisco.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I didn't get a batch in this weekend, so here's what we queued up last week and today. - A couple of defconfigs add back debugfs -- it used to be implicitly enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS dependency") removed that. - The rest are mostly minor fixlets of the usual kind; some DT tweaks, a headerfile refactor that needs a build fix now, etc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: bcm: Add missing sentinel to bcm2711_compat[] ARM: shmobile: defconfig: Restore debugfs support bus: ti-sysc: Fix missing reset delay handling ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node ARM: mmp: include the correct cputype.h ARM: dts: am437x-gp/epos-evm: fix panel compatible arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: bcm283x: Fix critical trip point ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example ...
2019-12-16ARM: dts: NSP: Use hardware I2C for BCM958625HRFlorian Fainelli
Now that the i2c-bcm-iproc driver has been fixed to permit reading more than 63 bytes in a single transaction with commit fd01eecdf959 ("i2c: iproc: Fix i2c master read more than 63 bytes") we no longer need to bitbang i2c over GPIOs which was necessary before to allow the PHYLINK/SFP subsystems to read SFP modules. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-16ARM: dts: Add generic compatible for omap sdma instancesTony Lindgren
We need this to pass auxdata to all the sdma instances. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-16ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omapTony Lindgren
We must bail out early if the clock is not hw_omap. Otherwise we will try to access invalid address with hwclk->clkdm_name: Unable to handle kernel paging request at virtual address ffffffff Internal error: Oops: 27 [#1] ARM ... (strcmp) from [<c011b348>] (clkdm_lookup+0x40/0x60) [<c011b348>] (clkdm_lookup) from [<c011cb84>] (ti_sysc_clkdm_init+0x5c/0x64) [<c011cb84>] (ti_sysc_clkdm_init) from [<c03680a8>] (sysc_probe+0x948/0x117c) [<c03680a8>] (sysc_probe) from [<c03d0af4>] (platform_drv_probe+0x48/0x98) ... Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-16Merge tag 'arm-soc/for-5.5/soc-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine fixes for 5.5-rc1, please pull the following: - H. Nikolaus adds a missing sentinel entry to the BCM2711 machine descriptor compatible array which would make multiplatform kernels fail to boot * tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Add missing sentinel to bcm2711_compat[] Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'samsung-fixes-5.5' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung fixes for v5.5 1. Restore debugfs support in exynos_defconfig (as now it is not selected as dependency of tracing). Debugfs is required by systemd and several tests. 2. Maintainers updates. * tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Restore debugfs support MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry MAINTAINERS: Update Lukasz Luba's email address Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16Merge tag 'renesas-fixes-for-v5.5-tag1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.5 - Restore debugfs support * tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Restore debugfs support Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-16ARM: dts: sun8i: r40: Add I2C pinmux optionsChen-Yu Tsai
The R40 has five I2C controllers. Currently only I2C0 has its pinmux option defined. Add the options for the remaining four, and set them as the default, since each controller has only one possible pinmux configuration. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-15ARM: bcm: Add missing sentinel to bcm2711_compat[]H. Nikolaus Schaller
commit 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") breaks boot of many other platforms (e.g. OMAP or i.MX6) if CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform config (e.g. omap2plus_defconfig). The symptom is that the OMAP based board does not show any activity beyond "Starting Kernel ..." even with earlycon. Reverting the mentioned commit makes it work again. The real fix is to add the missing NULL sentinel to the bcm2711_compat[] variable-length array. Fixes: 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC") Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-16ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6Masahiro Yamada
The next generation SoC can connect on-board slave devices via I2C ch5 and ch6. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-12-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix another build problem for Wireguard without Crypto" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm/curve25519 - add arch-specific key generation function
2019-12-13Merge tag 'omap-for-v5.5/fixes-rc1-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants for v5.5-rc1 cycle This series of changes contains fixes for issues recently noticed: - The ti-sysc interconnect target module driver needs fixes for mstandby quirk handling and reset delay - We need to configure am335x-sancloud-bbe to use rgmii-id mode because of the phy changes done earlier - NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV - We are still relying on DEBUG_FS at least for PM configuration, let's add it back - We need to update compatible for am437x-gp/epos-evm because of the recent changes to use generic panels * tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing reset delay handling ARM: dts: am437x-gp/epos-evm: fix panel compatible ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling Link: https://lore.kernel.org/r/pull-1576254925-709310@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-09-18 12:14:38 +0000