summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2013-08-16Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "The usual collection of random fixes. Also some further fixes to the last set of security fixes, and some more from Will (which you may already have in a slightly different form)" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7807/1: kexec: validate CPU hotplug support ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock ARM: 7811/1: locks: use early clobber in arch_spin_trylock ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event() ARM: 7809/1: perf: fix event validation for software group leaders ARM: Fix FIQ code on VIVT CPUs ARM: Fix !kuser helpers case ARM: Fix the world famous typo with is_gate_vma()
2013-08-16ARM: OMAP: rx51: change musb mode to OTGAaro Koskinen
Peripheral-only mode got broken in v3.11-rc1 because of unknown reasons. Change the mode to OTG, in practice that should work equally well even when/if the regression gets fixed. Note that the peripheral-only regression is a separate patch, this change is still correct as the role is handled by hardware. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-16ARM: OMAP2: fix musb usage for n8x0Daniel Mack
Commit b7e2e75a8c ("usb: gadget: drop unused USB_GADGET_MUSB_HDRC") dropped a config symbol that was unused by the musb core, but it turns out that board support code still had references to it. As the core now handles both dual role and host-only modes, we can just pass MUSB_OTG as mode from board files. Signed-off-by: Daniel Mack <zonque@gmail.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-16Fix TLB gather virtual address range invalidation corner casesLinus Torvalds
Ben Tebulin reported: "Since v3.7.2 on two independent machines a very specific Git repository fails in 9/10 cases on git-fsck due to an SHA1/memory failures. This only occurs on a very specific repository and can be reproduced stably on two independent laptops. Git mailing list ran out of ideas and for me this looks like some very exotic kernel issue" and bisected the failure to the backport of commit 53a59fc67f97 ("mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT"). That commit itself is not actually buggy, but what it does is to make it much more likely to hit the partial TLB invalidation case, since it introduces a new case in tlb_next_batch() that previously only ever happened when running out of memory. The real bug is that the TLB gather virtual memory range setup is subtly buggered. It was introduced in commit 597e1c3580b7 ("mm/mmu_gather: enable tlb flush range in generic mmu_gather"), and the range handling was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots"), but that fix was not complete. The problem with the TLB gather virtual address range is that it isn't set up by the initial tlb_gather_mmu() initialization (which didn't get the TLB range information), but it is set up ad-hoc later by the functions that actually flush the TLB. And so any such case that forgot to update the TLB range entries would potentially miss TLB invalidates. Rather than try to figure out exactly which particular ad-hoc range setup was missing (I personally suspect it's the hugetlb case in zap_huge_pmd(), which didn't have the same logic as zap_pte_range() did), this patch just gets rid of the problem at the source: make the TLB range information available to tlb_gather_mmu(), and initialize it when initializing all the other tlb gather fields. This makes the patch larger, but conceptually much simpler. And the end result is much more understandable; even if you want to play games with partial ranges when invalidating the TLB contents in chunks, now the range information is always there, and anybody who doesn't want to bother with it won't introduce subtle bugs. Ben verified that this fixes his problem. Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com> Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au> Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-16ARM: dts: Change i2s compatible string on exynos5250Padmavathi Venna
This patch removes quirks from i2s node and change the i2s compatible names. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson
From Nicolas Ferre: Device tree related fixes: - USB host numbering for 9x5 which was preventing from using all ports - a missing UART (not USART) clock lookup table was preventing from using them on 9x5 - too large amount of memory was specified for 9n12ek * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/DT: fix at91sam9n12ek memory node ARM: at91: add missing uart clocks DT entries ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-16ASoC: samsung: Fix DTS breakage from missing dependenciesMark Brown
Revert "ARM: dts: Change i2s compatible string on exynos5250" (c7f7e6) and "ARM: dts: exynos5250: move common i2s properties to exynos5 dtsi" 618728) since they reference DMA controller nodes that don't exist causing DT build issues. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15Merge branch 'topic/dma' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-pxa
2013-08-14Merge back earlier 'pm-cpuidle' material.Rafael J. Wysocki
2013-08-14ARM: pxa: ssp: add pxa_ssp_request_of()Daniel Mack
Add a function to lookup ssp devices from device tree. This way, users can reference the ssp devices in order to register to them. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14ARM: pxa: ssp: use devm_ functionsDaniel Mack
Use devm_ functions to allocate memory, ioremap, clk_get etc to clean up the error unwind path. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14ARM: pxa: ssp: add DT bindingsDaniel Mack
This patch contains an ugly hack for looking up the the DMA request number. The problem here is that the implementation as it stands will allocate the DMA channel from the user of the ssp port, and hence we cannot allocate a real channel here. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14ARM: pxa: ssp: add shortcut for &pdev->devDaniel Mack
No functional change, just a cosmetic cleanup. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14ARM: pxa: ssp: remove unnecessary warning on kzalloc() failureDaniel Mack
The memory subsystem will already complain loudly enough in such cases. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-14ARM: at91/DT: fix at91sam9n12ek memory nodeNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.5+
2013-08-14ARM: at91: add missing uart clocks DT entriesBoris BREZILLON
Add clocks to clock lookup table for uart DT entries. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-13perf/arm: Fix armpmu_map_hw_event()Stephen Boyd
Fix constraint check in armpmu_map_hw_event(). Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13Merge tag 'usb-for-v3.12' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.12 merge window All patches here have been pending on linux-usb and sitting in linux-next for a while now. The biggest things in this tag are: DWC3 learned proper usage of threaded IRQ handlers and now we spend very little time in hardirq context. MUSB now has proper support for BeagleBone and Beaglebone Black. Tegra's USB support also got quite a bit of love and is learning to use PHY layer and generic DT attributes. Other than that, the usual pack of cleanups and non-critical fixes follow. Signed-of-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/gadget/udc-core.c drivers/usb/host/ehci-tegra.c drivers/usb/musb/omap2430.c drivers/usb/musb/tusb6010.c
2013-08-13Merge branch 'security-fixes' into fixesRussell King
2013-08-13ARM: 7807/1: kexec: validate CPU hotplug supportStephen Warren
Architectures should fully validate whether kexec is possible as part of machine_kexec_prepare(), so that user-space's kexec_load() operation can report any problems. Performing validation in machine_kexec() itself is too late, since it is not allowed to return. Prior to this patch, ARM's machine_kexec() was testing after-the-fact whether machine_kexec_prepare() was able to disable all but one CPU. Instead, modify machine_kexec_prepare() to validate all conditions necessary for machine_kexec_prepare()'s to succeed. BUG if the validation succeeded, yet disabling the CPUs didn't actually work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lockWill Deacon
Commit 15e7e5c1ebf5 ("ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock") modifying our arch_spin_trylock to retry the acquisition if the lock appeared uncontended, but the strex failed. This patch does the same for rwlocks, which were missed by the original patch. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13ARM: 7811/1: locks: use early clobber in arch_spin_trylockWill Deacon
The res variable is written before we've finished with the input operands (namely the lock address), so ensure that we mark it as `early clobber' to avoid unintended register sharing. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()Stephen Boyd
Vince Weaver reports an oops in the ARM perf event code while running his perf_fuzzer tool on a pandaboard running v3.11-rc4. Unable to handle kernel paging request at virtual address 73fd14cc pgd = eca6c000 [73fd14cc] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_omap_hdmi omapdss snd_soc_omap_abe_twl6040 snd_soc_twl6040 snd_soc_omap snd_soc_omap_hdmi_card snd_soc_omap_mcpdm snd_soc_omap_mcbsp snd_soc_core snd_compress regmap_spi snd_pcm snd_page_alloc snd_timer snd soundcore CPU: 1 PID: 2790 Comm: perf_fuzzer Not tainted 3.11.0-rc4 #6 task: eddcab80 ti: ed892000 task.ti: ed892000 PC is at armpmu_map_event+0x20/0x88 LR is at armpmu_event_init+0x38/0x280 pc : [<c001c3e4>] lr : [<c001c17c>] psr: 60000013 sp : ed893e40 ip : ecececec fp : edfaec00 r10: 00000000 r9 : 00000000 r8 : ed8c3ac0 r7 : ed8c3b5c r6 : edfaec00 r5 : 00000000 r4 : 00000000 r3 : 000000ff r2 : c0496144 r1 : c049611c r0 : edfaec00 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: aca6c04a DAC: 00000015 Process perf_fuzzer (pid: 2790, stack limit = 0xed892240) Stack: (0xed893e40 to 0xed894000) 3e40: 00000800 c001c17c 00000002 c008a748 00000001 00000000 00000000 c00bf078 3e60: 00000000 edfaee50 00000000 00000000 00000000 edfaec00 ed8c3ac0 edfaec00 3e80: 00000000 c073ffac ed893f20 c00bf180 00000001 00000000 c00bf078 ed893f20 3ea0: 00000000 ed8c3ac0 00000000 00000000 00000000 c0cb0818 eddcab80 c00bf440 3ec0: ed893f20 00000000 eddcab80 eca76800 00000000 eca76800 00000000 00000000 3ee0: 00000000 ec984c80 eddcab80 c00bfe68 00000000 00000000 00000000 00000080 3f00: 00000000 ed892000 00000000 ed892030 00000004 ecc7e3c8 ecc7e3c8 00000000 3f20: 00000000 00000048 ecececec 00000000 00000000 00000000 00000000 00000000 3f40: 00000000 00000000 00297810 00000000 00000000 00000000 00000000 00000000 3f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3f80: 00000002 00000002 000103a4 00000002 0000016c c00128e8 ed892000 00000000 3fa0: 00090998 c0012700 00000002 000103a4 00090ab8 00000000 00000000 0000000f 3fc0: 00000002 000103a4 00000002 0000016c 00090ab0 00090ab8 000107a0 00090998 3fe0: bed92be0 bed92bd0 0000b785 b6e8f6d0 40000010 00090ab8 00000000 00000000 [<c001c3e4>] (armpmu_map_event+0x20/0x88) from [<c001c17c>] (armpmu_event_init+0x38/0x280) [<c001c17c>] (armpmu_event_init+0x38/0x280) from [<c00bf180>] (perf_init_event+0x108/0x180) [<c00bf180>] (perf_init_event+0x108/0x180) from [<c00bf440>] (perf_event_alloc+0x248/0x40c) [<c00bf440>] (perf_event_alloc+0x248/0x40c) from [<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc) [<c00bfe68>] (SyS_perf_event_open+0x4f4/0x8fc) from [<c0012700>] (ret_fast_syscall+0x0/0x48) Code: 0a000005 e3540004 0a000016 e3540000 (0791010c) This is because event->attr.config in armpmu_event_init() contains a very large number copied directly from userspace and is never checked against the size of the array indexed in armpmu_map_hw_event(). Fix the problem by checking the value of config before indexing the array and rejecting invalid config values. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13ARM: 7809/1: perf: fix event validation for software group leadersWill Deacon
It is possible to construct an event group with a software event as a group leader and then subsequently add a hardware event to the group. This results in the event group being validated by adding all members of the group to a fake PMU and attempting to allocate each event on their respective PMU. Unfortunately, for software events wthout a corresponding arm_pmu, this results in a kernel crash attempting to dereference the ->get_event_idx function pointer. This patch fixes the problem by checking explicitly for software events and ignoring those in event validation (since they can always be scheduled). We will probably want to revisit this for 3.12, since the validation checks don't appear to work correctly when dealing with multiple hardware PMUs anyway. Cc: <stable@vger.kernel.org> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-13ARM: dts: Change i2s compatible string on exynos5250Padmavathi Venna
This patch removes quirks from i2s node and change the i2s compatible names. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-13ARM: dts: exynos5250: move common i2s properties to exynos5 dtsiPadmavathi Venna
I2S nodes shares some properties across exynos5 SoCs (exynos5250 and exyno5420). Common code is moved to exynos5.dtsi which is included in exyno5250 and exynos5420 SoC files. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-12PCI: exynos: Split into Synopsys part and Exynos partJingoo Han
Exynos PCIe IP consists of Synopsys specific part and Exynos specific part. Only core block is a Synopsys Designware part; other parts are Exynos specific. Also, the Synopsys Designware part can be shared with other platforms; thus, it can be split two parts such as Synopsys Designware part and Exynos specific part. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Mohit KUMAR <Mohit.KUMAR@st.com>
2013-08-12Merge tag 'kvm-arm-fixes-3.11' of ↵Paolo Bonzini
git://git.linaro.org/people/cdall/linux-kvm-arm into kvm-master KVM/ARM Fixes for the Linux 3.11 release
2013-08-11KVM: ARM: Squash len warningChristoffer Dall
The 'len' variable was declared an unsigned and then checked for less than 0, which results in warnings on some compilers. Since len is assigned an int, make it an int. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-08-11Merge tag 'samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Fix to boot kernel on exynos5440 which has no specific map_io(). Current kernel cannot support no CPU specific map_io() for Samsung SoCs. * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: fix to support for missing cpu specific map_io Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-09Merge tag 'fbdev-fixes-3.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - omapdss: compilation fix and DVI fix for PandaBoard - mxsfb: fix colors when using 18bit LCD bus * tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: ARM: OMAP: dss-common: fix Panda's DVI DDC channel video: mxsfb: fix color settings for 18bit data bus and 32bpp OMAPDSS: analog-tv-connector: compile fix
2013-08-09usb: musb dma: add cppi41 dma driverSebastian Andrzej Siewior
This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: musb: dsps: use proper child nodesSebastian Andrzej Siewior
This moves the two instances from the big node into two child nodes. The glue layer ontop does almost nothing. There is one devices containing the control module for USB (2) phy, (2) usb and later the dma engine. The usb device is the "glue device" which contains the musb device as a child. This is what we do ever since. The new file musb_am335x is just here to prob the new bus and populate child devices. There are a lot of changes to the dsps file as a result of the changes: - musb_core_offset This is gone. The device tree provides memory ressources information for the device there is no need to "fix" things - instances This is gone as well. If we have two instances then we have have two child enabled nodes in the device tree. For instance the SoC in beagle bone has two USB instances but only one has been wired up so there is no need to load and init the second instance since it won't be used. - dsps_glue is now per glue device In the past there was one of this structs but with an array of two and each instance accessed its variable depending on the platform device id. - no unneeded copy of structs I do not know why struct dsps_musb_wrapper is copied but it is not necessary. The same goes for musb_hdrc_platform_data which allocated on demand and then again by platform_device_add_data(). One copy is enough. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09Merge branch 'nop-phy-rename' into nextFelipe Balbi
Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy-generic.c
2013-08-09usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceivSebastian Andrzej Siewior
The "nop" driver isn't a do-nothing-stub but supports a couple functions like clock on/off or is able to use a voltage regulator. This patch simply renames the driver to "generic" since it is easy possible to extend it by a simple function istead of writing a complete driver. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: - MSM: GPIO fixes (includes old code removal) - OMAP: earlyprintk regression, AM33xx cpgmac PM regression - OMAP5: urgent fix for potentially harmful voltage regulator values - Renesas: gpio-keys fix, fix SD card detection, fix shdma calculation error - STi: critical SMP boot fix - tegra: DTS fix for usb-phy - a couple MAINTAINERS updates (Arnd is on paternity leave, Kevin is stepping up to help arm-soc maintenance) * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: add TI Keystone ARM platform MAINTAINERS: delete Srinidhi from ux500 ARM: tegra: enable ULPI phy on Colibri T20 ARM: STi: remove sti_secondary_start from INIT section. ARM: STi: Fix cpu nodes with correct device_type. ARM: shmobile: lager: do not annotate gpio_buttons as __initdata ARM: shmobile: BOCK-W: fix SDHI0 PFC settings shdma: fixup sh_dmae_get_partial() calculation error ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space ARM: OMAP2+: hwmod: rt address space index for DT ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state ARM: OMAP2+: Avoid idling memory controllers with no drivers ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL ARM: dts: omap5-uevm: update optional/unused regulator configurations ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC ARM: dts: omap5-uevm: document regulator signals used on the actual board ARM: msm: Consolidate gpiomux for older architectures ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code ARM: msm: dts: Fix the gpio register address for msm8960
2013-08-08ARM: Fix FIQ code on VIVT CPUsRussell King
Aaro Koskinen reports the following oops: Installing fiq handler from c001b110, length 0x164 Unable to handle kernel paging request at virtual address ffff1224 pgd = c0004000 [ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a ... [<c0013154>] (set_fiq_handler+0x0/0x6c) from [<c0365d38>] (ams_delta_init_fiq+0xa8/0x160) r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c [<c0365c90>] (ams_delta_init_fiq+0x0/0x160) from [<c0365b14>] (ams_delta_init+0xd4/0x114) r6:00000000 r5:fffece10 r4:c037a9e0 [<c0365a40>] (ams_delta_init+0x0/0x114) from [<c03613b4>] (customize_machine+0x24/0x30) This is because the vectors page is now write-protected, and to change code in there we must write to its original alias. Make that change, and adjust the cache flushing such that the code will become visible to the instruction stream on VIVT CPUs. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-07arm64: KVM: fix 2-level page tables unmappingMarc Zyngier
When using 64kB pages, we only have two levels of page tables, meaning that PGD, PUD and PMD are fused. In this case, trying to refcount PUDs and PMDs independently is a a complete disaster, as they are the same. We manage to get it right for the allocation (stage2_set_pte uses {pmd,pud}_none), but the unmapping path clears both pud and pmd refcounts, which fails spectacularly with 2-level page tables. The fix is to avoid calling clear_pud_entry when both the pmd and pud pages are empty. For this, and instead of introducing another pud_empty function, consolidate both pte_empty and pmd_empty into page_empty (the code is actually identical) and use that to also test the validity of the pud. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-08-07ARM: KVM: Fix unaligned unmap_range leakChristoffer Dall
The unmap_range function did not properly cover the case when the start address was not aligned to PMD_SIZE or PUD_SIZE and an entire pte table or pmd table was cleared, causing us to leak memory when incrementing the addr. The fix is to always move onto the next page table entry boundary instead of adding the full size of the VA range covered by the corresponding table level entry. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-08-07ARM: Fix !kuser helpers caseRussell King
Fix yet another build failure caused by a weird set of configuration settings: LD init/built-in.o arch/arm/kernel/built-in.o: In function `__dabt_usr': /home/tom3q/kernel/arch/arm/kernel/entry-armv.S:377: undefined reference to `kuser_cmpxchg64_fixup' arch/arm/kernel/built-in.o: In function `__irq_usr': /home/tom3q/kernel/arch/arm/kernel/entry-armv.S:387: undefined reference to `kuser_cmpxchg64_fixup' caused by: CONFIG_KUSER_HELPERS=n CONFIG_CPU_32v6K=n CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG=n Reported-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-07ARM: Fix the world famous typo with is_gate_vma()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-06ARM: KVM: Fix 64-bit coprocessor handlingChristoffer Dall
The PAR was exported as CRn == 7 and CRm == 0, but in fact the primary coprocessor register number was determined by CRm for 64-bit coprocessor registers as the user space API was modeled after the coprocessor access instructions (see the ARM ARM rev. C - B3-1445). However, just changing the CRn to CRm breaks the sorting check when booting the kernel, because the internal kernel logic always treats CRn as the primary register number, and it makes the table sorting impossible to understand for humans. Alternatively we could change the logic to always have CRn == CRm, but that becomes unclear in the number of ways we do look up of a coprocessor register. We could also have a separate 64-bit table but that feels somewhat over-engineered. Instead, keep CRn the primary representation of the primary coproc. register number in-kernel and always export the primary number as CRm as per the existing user space ABI. Note: The TTBR registers just magically worked because they happened to follow the CRn(0) regs and were considered CRn(0) in the in-kernel representation. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-08-05ASoC: kirkwood: combine kirkwood-i2s and kirkwood-dma driversRussell King
These really should be a single driver because they're fully integrated in hardware. Make them so. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05xen/arm: missing put_cpu in xen_percpu_initJulien Grall
When CONFIG_PREEMPT is enabled, Linux will not be able to boot and warn: [ 4.127825] ------------[ cut here ]------------ [ 4.133376] WARNING: at init/main.c:699 do_one_initcall+0x150/0x158() [ 4.140738] initcall xen_init_events+0x0/0x10c returned with preemption imbalance This is because xen_percpu_init uses get_cpu but doesn't have the corresponding put_cpu. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-08-05ARM: dts: imx28-evk: add the RTS/CTS property for auart0Huang Shijie
Add the RTS/CTS property for auart0 which means we enable the DMA support for it. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04ARM: tegra: enable ULPI phy on Colibri T20Lucas Stach
This was missed when splitting out the phy from the controller node in commit 9dffe3be3f32 (ARM: tegra: modify ULPI reset GPIO properties). Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04ARM: STi: remove sti_secondary_start from INIT section.Srinivas Kandagatla
This patch removes sti_secondary_start from _INIT section, there are 2 reason for this removal. 1. discarding such a small code does not save much, given the RAM sizes. 2. Having this code discarded, creates corruption issue when we boot smp-kernel with nrcpus=1 or with single cpu node in DT. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04ARM: STi: Fix cpu nodes with correct device_type.Srinivas Kandagatla
This patch fixes cpu nodes with device_type = "cpu". This change was not necessary before 3.10-rc7. Without this patch STi SOCs does not boot as SMP. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04Merge tag 'renesas-fixes2-for-v3.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Second round of Renesas ARM based SoC fixes for v3.11 * Lager board: do not annotate gpio_buttons as __initdata - This avoids accessing uninitialised memory if keys are pressed after kernel initialisation completes. - Bug introduced in gpio-keys were enabled in v3.11-rc1 * Bock-W board: fix SDHI0 PFC settings - Allow detection of SD card - Bug introduced in SDHI support was added in v3.11-rc1 * shdma: fixup sh_dmae_get_partial() calculation error - Bug introduced in 2.6.34-rc1. * armadillo800eva board: Don't request GPIO 166 in board code - Allow use of touchscreen - Bug introduced in v3.11-rc1 * tag 'renesas-fixes2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: do not annotate gpio_buttons as __initdata ARM: shmobile: BOCK-W: fix SDHI0 PFC settings shdma: fixup sh_dmae_get_partial() calculation error ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04Merge tag 'for-v3.11-rc/omap-fixes-b' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley via Tony Lindgren: Some OMAP hwmod fixes for v3.11-rc. Mostly intended to fix an earlyprintk regression and an AM33xx cpgmac power management regression. Basic build, boot, and PM tests are available here: http://www.pwsan.com/omap/testlogs/hwmod_fixes_a_v3.11-rc/20130730042132/ The tests include temporary fixes for the unrelated 2430SDP and OMAP3 boot regressions, which are not part of this signed tag. * tag 'for-v3.11-rc/omap-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space ARM: OMAP2+: hwmod: rt address space index for DT ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state ARM: OMAP2+: Avoid idling memory controllers with no drivers ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-09-14 18:16:05 +0000