summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2013-06-18ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devicesEduardo Valentin
Add the bandgap entry for OMAP4430 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> [benoit.cousson@linaro.org: Add blank line and fix reg presentation] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ lineKevin Hilman
On most OMAP3 platforms, the twl4030 IRQ line is connected to the SYS_NIRQ line on OMAP. Add another DTS include file (twl4030_omap3.dtsi) for boards that hook up the twl4030 this way to include. This allows RTC wake from off-mode to work again on OMAP3-based platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, 3530/Overo, 3730/Overo-STORM. Special thanks to Florian Vaussard for suggesting use of preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeupKevin Hilman
Using the gpio-keys bindings, configure the user button on Beagle boards. Since the user button is enabled as a wakeup source, also ensure the GPIO pin is mux'd correctly and has IO ring wakeups enabled, so it can also wakeup from off mode. Special thanks to Florian Vaussard for suggesting the preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeupKevin Hilman
Ensure the console uart (UART3) on these boards is mux'd correctly, and IO ring wakeup is enabled. This is needed for serial console wakeups when using DT boot. Thanks to Florian Vaussard for suggestion to use preprocessor features. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5-uevm: Add uart pinctrl dataSourav Poddar
Booting omap5 uevm results in the following error "did not get pins for uart error: -19" This happens because omap5 uevm dts file is not adapted to use uart through pinctrl framework. Populate uart pinctrl data to get rid of the error. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5-uevm: Add LED support for uEVM blue LEDDan Murphy
Add support for blue LED 1 off of GPIO 153. Make the LED a heartbeat LED Configure the MUX for GPIO output. Signed-off-by: Dan Murphy <dmurphy@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5-uevm: Add USB Host supportRoger Quadros
Provide the RESET regulators for the USB PHYs, the USB Host port modes and the PHY devices. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros <rogerq@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap5: Make uevm as the official board and deprecate sevm supportSricharan R
The uevm is the only official board supported for the OMAP5 soc in mainline. The existent sevm platform will no more be supported. Hence cleaning up the board dts file to have only the data required for uevm. Renaming the board dts file and adding the following cleanups. * There are no devices connected on I2C 2,3,4 buses. So remove the pinmux data for the same. * OMAP5432 and DDR3 memory is used in the uevm. Temperature polling is not supported with DDR3 memories. Because of DDR3 phy limitation the voltage change across DVFS and all shadow registers for DVFS on DDR3 is not supported. Hence the emif kernel driver is not required, so removing the DDR3 device file and emif nodes for uevm. * Keypad is not supported on uevm. So remove the device node. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs targetFlorian Vaussard
When making the dtbs target on OMAP/AM35xx, some trees are not built. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Use pinctrl constantsFlorian Vaussard
Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Use existing constants for GPIOsFlorian Vaussard
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM3XXX: Use #include for all device treesFlorian Vaussard
Replace /include/ by #include for AM33XX and AM35XX device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM43x: Initial supportAfzal Mohammed
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those represented here are the minimal DT nodes necessary to get kernel booting. In DT nodes, "ti,hwmod" property has not been added, this would be added along with PRCM support for AM43x. Signed-off-by: Ankur Kishore <a-kishore@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap4-panda: Update the twl6040 gpio to macro definitionDan Murphy
Update the dt property ti,audpwron-gpio to use the gpio macro definition for GPIO_ACTIVE_HIGH. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap4-panda: Update the LED support for the pandaDan Murphy
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es are different. A1-A3 = gpio_wk7 ES = gpio_110 There is no change to LED D2 Abstract away the pinmux and the LED definitions for the two boards into the respective DTS files. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use pinctrl constantsFlorian Vaussard
Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4/5: Use existing constants for IRQsFlorian Vaussard
Use the constants defined in include/dt-bindings/interrupt-controller/ to enhance readability. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use existing constants for GPIOsFlorian Vaussard
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP2+: Use #include for all device treesFlorian Vaussard
Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evmPhilip Avinash
GPMC controller on AM335x-EVM has a NAND flash connected to it. This patch updates following in am335x-evm.dts: - adds nandflash specific pin-mux configs - adds nand node as child of GPMC contoller, with information about NAND flash interface, NAND partition table, ECC scheme, elm handle id. - updates GPMC node for newer GPMC DT properties added in linux-3.10. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Gupta, Pekon <pekon@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add ELM nodePhilip, Avinash
ELM hardware engine is used for locating bit-flips in NAND data This patch is required for working of hardware based NAND ECC schemes with DT support. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap3-igep0030: Add NAND flash supportJavier Martinez Canillas
The IGEP COM Module has an 512MB NAND flash memory. Add a device node for this NAND and its partition layout. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap3-igep0020: Add NAND flash supportJavier Martinez Canillas
The IGEPv2 board has an 512MB NAND flash memory. Add a device node for this NAND and its partition layout. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: omap3-igep0020: Add SMSC911x LAN chip supportJavier Martinez Canillas
The IGEPv2 board has an SMSC LAN9221i ethernet chip connected to the OMAP3 processor though the General-Purpose Memory Controller. This patch adds a device node for the ethernet chip as a GPMC child and all its dependencies (regulators, GPIO and pin muxs). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock outputVaibhav Hiremath
xdma_event_intr1.clkout2 pad can be used to source clock from either 32K OSC or any of the PLL (except MPU) outputs. On the existing AM335x based boards (EVM, EVM-SK and Bone), this pad is used to feed the clock to audio codes. So, this patch configures the pinmux to get clkout2 on the pad. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add default pinctrl binding for UART0 deviceVaibhav Hiremath
Add pin control binding for UART0 device nodes in all board specific DT files. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Fix uart numbering to match hardware/TRMVaibhav Hiremath
With DT support, where naming convention is based on base-addr and not id, so we should follow TRM/Spec numbering label. This patch changes UART numbering as per TRM, as uart0-5. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add pinctrl binding to gpio-leds nodeVaibhav Hiremath
Now gpio-leds driver is using devm_pinctrl_get_select_default() api to set default pinmux configuration required for the functionality of the driver, so this patch moves respective pinctrl binding inside leds node. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: AM33XX: Add default pinctrl binding for I2C deviceVaibhav Hiremath
Add pin control binding for I2C device nodes in all board specific DT files (as per current usage), EVM: Both i2c0 and i2c1 EVM-SK and Bone: Only i2c0 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Matt Porter <mporter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18ARM: dts: OMAP4+: Remove multimedia carveoutsSuman Anna
The carveouts that have been reserved for multimedia usecases are not being used currently by any driver and so have been cleaned up. Memory will be allocated runtime through CMA for enabling the multimedia usecases. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-18Revert "dw_apb_timer_of.c: Remove parts that were picoxcell-specific"John Stultz
This reverts commit 55a68c23e0a675b2b8ac2656fd6edbf98b78e4c6. In order to avoid a collision with dw_apb_timer changes in the arm-soc tree, revert this change. I'm leaving it to the arm-soc folks to sort out if they want to keep the other side of the collision or if they're just going to back it all out and try again during the next release cycle. Reported-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-18Merge branch 'for-rmk/arch-timer-cleanups' of git://linux-arm.org/linux-mr ↵Russell King
into devel-stable Please pull these arch_timer cleanups I've been holding onto for a while. They're the same as my last posting [1], but have been rebased to v3.10-rc3. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/170602.html -- Mark Rutland
2013-06-18Merge branch 'for-rmk/lpae' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/kernel/smp.c Please pull these miscellaneous LPAE fixes I've been collecting for a while now for 3.11. They've been tested and reviewed by quite a few people, and most of the patches are pretty trivial. -- Will Deacon.
2013-06-19ARM: EXYNOS: extend soft-reset support for EXYNOS5420Chander Kashyap
Extend the soft reset support for EXYNOS5420 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: add secondary CPU boot base location for EXYNOS5420Chander Kashyap
The location at which the boot address is specified for secondary CPUs of EXYNOS5420 is SYSRAM base + 4. Update the cpu_boot_reg function accordingly. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: Add initial device tree support for EXYNOS5420Chander Kashyap
Add initial device tree nodes for EXYNOS5420 SoC and SMDK5420 board. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: use four additional chipid bits to identify EXYNOS familyChander Kashyap
Use chipid[27:20] bits to identify the EXYNOS family while setting up the serial port during the uncompression setup. This uses four additional bits of chipid to identify the EXYNOS family since this is required for identifying EXYNOS5420 SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Add support for EXYNOS5420 SoCChander Kashyap
EXYNOS5420 is new SoC in Samsung's Exynos5 SoC series. Add initial support for this new SoC. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: list the CPU nodes for EXYNOS5250Chander Kashyap
Instead of having to specify the number for CPUs in EXYNOS5250 in platsmp.c file, let the number of CPUs be determined by having this information listed in EXYNOS5250 device tree file. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: fork out common EXYNOS5 nodesChander Kashyap
In preparation of adding support for EXYNOS5420, which has many peripherals similar to EXYNOS5250, a new common EXYNOS5 device tree source file is created out of the exising EXYNOS5250 device tree source file. Only the common nodes required for basic boot up on EXYNOS5420 based boards are moved into this new file and the rest of the common nodes would be moved subsequently. EXYNOS5440 SoC is quite different from EXYNOS5250 and EXYNOS5420. Hence it is not possible to reuse "exynos5.dtsi" for EXYNOS5440. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18Merge branch 'for-rmk/hugepages' of ↵Russell King
git://git.linaro.org/people/stevecapper/linux into devel-stable These changes bring both HugeTLB support and Transparent HugePage (THP) support to ARM. Only long descriptors (LPAE) are supported in this series. The code has been tested on an Arndale board (Exynos 5250).
2013-06-19ARM: EXYNOS: call scu_enable() only in case of cortex-A9 processorLeela Krishna Amudala
This patch reads the cpuid part number and if it matches with cortex-A9, calls scu_enable() Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Select PINCTRL_EXYNOS for exynos4/5 at chip levelDoug Anderson
Previously if you had MACH_EXYNOS5_DT but not MACH_EXYNOS4_DT you'd be missing the pincontrol definitions. Move PINCTRL selects to the arch level since we should be enabling the code for all exynos variants. Update the PINCTRL descriptions to indicate that PINCTRL_EXYNOS is not for exynos5440. Also add basic dependencies for the PINCTRL_EXYNOS kernel config. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: EXYNOS: Enable XHCI support on exynos5Vivek Gautam
This patch enables support for XHCI on exynos5 series of SOCs, to support host side USB 3.0 support. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: add clock provider information for i2s controllers in Exynos5250Padmavathi Venna
Add clock lookup information for i2s controllers on exynos5250 SoC. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: add Exynos audio subsystem clock controller nodePadmavathi Venna
Audio subsystem introduced in s5pv210 and exynos platforms which has a internal clock controller. This patch adds a node for the same on exynos5250. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: use #include for all device trees for SamsungPadmavathi Venna
Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19Merge branch 'v3.11-next/s3c24xx-dt-2' into v3.11-next/dt-n-clk-audioKukjin Kim
2013-06-19ARM: SAMSUNG: Remove unused plat/regs-watchdog.h headerTomasz Figa
Since there are no remaining users of this header, it can be safely dropped. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: SAMSUNG: Remove legacy watchdog reset codeTomasz Figa
Since all platforms have been moved to the new watchdog reset driver, the legacy code can be removed safely. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-16 20:45:03 +0000