| Age | Commit message (Collapse) | Author |
|---|
|
Since we now have support for the interrupt controller pm_uart's
interrupt is routed through it make sense to wire up it's interrupt
in the device tree.
The interrupt is the same for all known chips so it goes in the
base dtsi.
Link: https://lore.kernel.org/r/20201002133418.2250277-4-daniel@0x0f.com
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add the IRQ and FIQ intc instances to the base MStar/SigmaStar v7
dtsi. All of the known SoCs have both and at the same place with
their common IPs using the same interrupt lines.
Link: https://lore.kernel.org/r/20201002133418.2250277-3-daniel@0x0f.com
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
MediaTek recently introduced support for the MStar interrupt
controller that is also present in some of their chips as well
as the MStar/Sigmastar chips.
Almost all of the peripheral interrupts go through an instance of
this controller in MStar/SigmaStar Arm v7 chips so we want to select
it if CONFIG_ARCH_MSTARV7 is selected.
Link: https://lore.kernel.org/r/20201002133418.2250277-2-daniel@0x0f.com
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Two regression fixes for omaps
Fix AM33XX_IOPAD macro that broke after recent pinctrl changes
to use #pinctrl-cells = 2. And fix omap_enter_idle_coupled()
for cases where cpu_cluster_pm_enter() returns an error as
otherwise we may end up wrongly idling the MPU domain on the
next WFI.
* tag 'omap-for-v5.9/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails
ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2
Link: https://lore.kernel.org/r/pull-1601544624-617679@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10 (take two)
- Fix the system controller compatible for the hi3620 and hip04 SoCs
- Add the basic device tree for the hisilicon SD5203 SoC
* tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
Link: https://lore.kernel.org/r/5F742717.5080405@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
More dts changes for omaps for v5.10 merge window
Some more dts changes that did not make it to the first set of
dts changes:
- Drop unnessary nokia,nvm-size property
- A series of changes to use "okay" instead of "ok"
- A series of changes to move boards to use new cpsw switch
driver and drop the drop legacy cpsw dt node
- A series of changes to fix issues with the GPIO binding
usage
* tag 'omap-for-v5.10/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am3874: iceboard: fix GPIO expander reset GPIOs
ARM: dts: am335x: t335: align GPIO hog names with dtschema
ARM: dts: am335x: lxm: fix PCA9539 GPIO expander properties
ARM: dts: am437x-l4: drop legacy cpsw dt node
ARM: dts: am437x: switch to new cpsw switch drv
ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver
ARM: dts: dra7: drop legacy cpsw dt node
ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drv
ARM: dts: dra7x-evm: switch to new cpsw switch drv
ARM: dts: beagle-x15: switch to new cpsw switch drv
ARM: dts: am57xx-idk: switch to new cpsw switch drv
ARM: dts: am5729: beagleboneai: switch to new cpsw switch drv
ARM: dts: am43xx: replace status value "ok" by "okay"
ARM: dts: dra7xx: replace status value "ok" by "okay"
ARM: dts: omap: replace status value "ok" by "okay"
ARM: dts: n9, n950: Remove nokia,nvm-size property
Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
A few more DT patches for 5.10, to support simple-framebuffer on the v3s
and the pinecube board
* tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: v3s: Add simple-framebuffer
ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera
dt-bindings: arm: sunxi: add Pine64 PineCube binding
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch adds FMC2 EBI controller support used by STM32MP SOCs.
Link: https://lore.kernel.org/r/20200924101342.4707-1-alexandre.torgue@st.com
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Link: https://lore.kernel.org/r/20200924101113.4528-1-alexandre.torgue@st.com
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
cpu-supply fixes (supply for each cpu core not only cpu0)
and a spelling for the status property.
* tag 'v5.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: replace status value "ok" by "okay"
ARM: dts: rockchip: update cpu supplies on rk3066a
ARM: dts: rockchip: rk3066a: add label to cpu@1
ARM: dts: rockchip: update cpu supplies on rk3288
Link: https://lore.kernel.org/r/1834049.gShM3QRH0n@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM DT for v5.10:
- Add devicetree support for Caninos Loucos Labrador SBC manufactured
by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website: https://caninosloucos.org/en/
- Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU
- Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi
team in Taiwan. This board is based on Actions Semi S500 SoC.
More information about this board can be found in their website:
http://roseapplepi.org/
* tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
ARM: dts: owl-s500: Add RoseapplePi
ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
ARM: dts: Add Caninos Loucos Labrador v2
Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- Allwinner A100 initial support
- Mali, DMA, cedrus and IR Support for the R40
- Crypto support for the v3s
- New board: Allwinner A100 Perf1
* tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (24 commits)
ARM: dts: sun8i: v3s: Enable crypto engine
dt-bindings: crypto: Add compatible for V3s
dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset
arm64: dts: allwinner: a64: Update the audio codec compatible
arm64: dts: allwinner: a64: Update codec widget names
ARM: dts: sun8i: a33: Update codec widget names
ARM: dts: sun8i: r40: Add video engine node
ARM: dts: sun8i: r40: Add node for system controller
dt-bindings: sram: allwinner, sun4i-a10-system-control: Add R40 compatibles
ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR
ARM: dts: sun8i: r40: Add IR nodes
dt-bindings: media: allwinner, sun4i-a10-ir: Add R40 compatible
ARM: dts: sun8i: r40: Add DMA node
dt-bindings: dma: allwinner,sun50i-a64-dma: Add R40 compatible
arm64: allwinner: A100: add support for Allwinner Perf1 board
dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings
arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller
dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi
ARM: dts: sun4i: Enable HDMI support on the Mele A1000
...
Link: https://lore.kernel.org/r/ac39ee89-ea3a-4971-8cd7-8c4b2ecef39d.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: amlogic updates for v5.10 (round 2)
- GPU: remove invalid interrupt lines
* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
Link: https://lore.kernel.org/r/20200917165040.22908-2-krzk@kernel.org
Link: https://lore.kernel.org/r/20200917165040.22908-1-krzk@kernel.org
Link: https://lore.kernel.org/r/7hsgawl9h2.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.9
- Fix touch controller probe failure on the iWave RainboW G20D Qseven
board.
* tag 'renesas-fixes-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
Link: https://lore.kernel.org/r/20200928115645.10985-1-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.10 merge window
Most of changes are on dwc3 (38.8%) with cdns3 falling close
behind (24.1%).
The biggest changes here are a series of non-critical fixes to corner
cases on dwc3, produced by Thinh N, and a series of major improvements
to cdns3 produced by Peter C.
We also have the traditional set of new device support (Intel Keem
Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch
fixes on dwc3 by yours truly and a set of minor changes all over the
stack.
* tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits)
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs
usb: dwc2: override PHY input signals with usb role switch support
dt-bindings: usb: dwc2: add optional usb-role-switch property
usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform
dt-bindings: usb: Add Intel Keem Bay USB controller bindings
usb: dwc3: gadget: Support up to max stream id
usb: dwc3: gadget: Return early if no TRB update
usb: dwc3: gadget: Keep TRBs in request order
usb: dwc3: gadget: Revise setting IOC when no TRB left
usb: dwc3: gadget: Look ahead when setting IOC
usb: dwc3: gadget: Allow restarting a transfer
usb: bdc: remove duplicated error message
usb: dwc3: Stop active transfers before halting the controller
usb: cdns3: gadget: enlarge the TRB ring length
usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above
usb: cdns3: gadget: need to handle sg case for workaround 2 case
usb: cdns3: gadget: handle sg list use case at completion correctly
usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case
usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer
...
|
|
The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
#define INT_MALI_GP AM_IRQ(160)
#define INT_MALI_GP_MMU AM_IRQ(161)
#define INT_MALI_PP AM_IRQ(162)
#define INT_MALI_PMU AM_IRQ(163)
#define INT_MALI_PP0 AM_IRQ(164)
#define INT_MALI_PP0_MMU AM_IRQ(165)
#define INT_MALI_PP1 AM_IRQ(166)
#define INT_MALI_PP1_MMU AM_IRQ(167)
#define INT_MALI_PP2 AM_IRQ(168)
#define INT_MALI_PP2_MMU AM_IRQ(169)
#define INT_MALI_PP3 AM_IRQ(170)
#define INT_MALI_PP3_MMU AM_IRQ(171)
#define INT_MALI_PP4 AM_IRQ(172)
#define INT_MALI_PP4_MMU AM_IRQ(173)
#define INT_MALI_PP5 AM_IRQ(174)
#define INT_MALI_PP5_MMU AM_IRQ(175)
#define INT_MALI_PP6 AM_IRQ(176)
#define INT_MALI_PP6_MMU AM_IRQ(177)
#define INT_MALI_PP7 AM_IRQ(178)
#define INT_MALI_PP7_MMU AM_IRQ(179)
However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU
Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200815181957.408649-1-martin.blumenstingl@googlemail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix one more issue related to the recent RCU-lockdep changes, a
typo in documentation and add a missing return statement to
intel_pstate.
Specifics:
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson)
- Fix typo in the PM documentation (Yoann Congal)
- Add return statement that is missing after recent changes in the
intel_pstate driver (Zhang Rui)"
* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: imx6q: Fixup RCU usage for cpuidle
Documentation: PM: Fix a reStructuredText syntax error
cpufreq: intel_pstate: Fix missing return statement
|
|
On newer keyboards this key is in a different place. Add both options to
the keymap so that both new and old keyboards work.
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat
according to below.
[6.870684] [<c0db7690>] (_raw_spin_lock) from [<c011f6a4>] (imx6q_enter_wait+0x18/0x9c)
[6.878846] [<c011f6a4>] (imx6q_enter_wait) from [<c09abfb0>] (cpuidle_enter_state+0x168/0x5e4)
To fix the problem, let's assign the corresponding idlestate->flags the
CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit()
at the proper point.
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add sd5203.dts for Hisilicon SD5203 SoC platform.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
The DT binding for Hisilicon system controllers require to have a
"syscon" compatible string.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Add support of early console for SD5203.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Enable support for the Hisilicon SD5203 SoC. The core is ARM926EJ-S.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of HOST_EXTRACFLAGS for dtc
- Several warning fixes for DT bindings
* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
dt-bindings: Fix 'reg' size issues in zynqmp examples
ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
dt-bindings: crypto: sa2ul: fix a DT binding check warning
|
|
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
|
|
The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.
Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-10-miquel.raynal@bootlin.com
|
|
The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.
However, simple-bus also comes with some constraints, like having the ranges,
our case.
Let's switch to simple-mfd that provides the same probing logic without
those constraints.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add support for "allwinner,simple-framebuffer"
with "mixer0-lcd0" pipeline from boot loader (u-boot).
It depends on boot loader implementation of DE2/TCON0
setup with LCD.
Signed-off-by: Martin Cerveny <m.cerveny@computer.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200916175941.8448-1-m.cerveny@computer.org
|
|
The Pine64 PineCube IP camera is an IP camera with SoChip S3 SoC.
It comes with a main board, an expansion board and a camera.
The main board features a Micro-USB power-only jack, a USB Type-A port,
an Ethernet port connected to the internal PHY of the SoC and a Realtek
RTL8189ES SDIO Wi-Fi module. A RGB LCD connector is reserved on the
board.
The expansion board features a TF slot, a microphone, a speaker
connector with on-board amplifier and a few IR LEDs.
Add support for the kit, with features on the main board and the
expansion board now.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923010215.148819-2-icenowy@aosc.io
|
|
As SMP-on-UP is a valid configuration on 32bit ARM, do not assume that
IPIs are populated in show_ipi_list().
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
I2C1 controller is available at PE bank, usually used for
connecting an I2C-controlled camera sensor.
Add pinctrl node for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923010014.148482-2-icenowy@aosc.io
|
|
The CSI1 controller of V3/V3s/S3/S3L SoCs is used for parallel CSI.
As we're going to add support for Pine64 SCC board, which uses 8-bit
parallel CSI (and the MCLK output), add the pinctrl node of 8-bit
CSI and MCLK to the DTSI file.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923010122.148661-1-icenowy@aosc.io
|
|
The CSI1 controller of V3/V3s/S3/S3L chips is used for parallel CSI.
Add the device tree node of it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923005858.148261-2-icenowy@aosc.io
|
|
The UART2 RX/TX pins on Allwinner V3 series is at PB0/1, which is used
as debugging UART on some boards.
Add pinctrl node for them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923005858.148261-1-icenowy@aosc.io
|
|
The Allwinner V3/V3s/S3L/SoChip S3 Ethernet MAC and internal PHY is quite
similar to the ones on Allwinner H3, except for V3s the external MII is
not wired out.
Add ethernet support to V3/V3s/S3/S3L.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923005709.147966-2-icenowy@aosc.io
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.10
1. Clear unneeded L2C-310 flag which presenc was triggering warning
message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
Maintainers.
* tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: exynos: clear L310_AUX_CTRL_NS_LOCKDOWN in default l2c_aux_val
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Changes for v5.10-rc1
These changes extend support on the Nexus 7 and Acer A500 devices.
* tag 'tegra-for-5.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: nexus7: Add SMB347 battery charger
ARM: tegra: nexus7: Add touchscreen
ARM: tegra: nexus7: Use PLLC for WiFi MMC clock parent
ARM: tegra: acer-a500: Use PLLC for WiFi MMC clock parent
ARM: tegra: acer-a500: Set WiFi MMC clock rate to 50 MHz
ARM: tegra: acer-a500: Correct PINCTRL configuration
ARM: tegra: acer-a500: Remove atmel,cfg_name property
ARM: tegra: acer-a500: Add aliases for MMC
ARM: tegra: nexus7: Add aliases for MMC
dt-bindings: power: supply: Add device-tree binding for Summit SMB3xx
dt-bindings: tegra: pmc: Add Tegra234 support
dt-bindings: fuse: tegra: Add Tegra234 support
dt-bindings: tegra: Add Tegra234 VDK compatible
dt-bindings: misc: tegra186-misc: Add Tegra234 support
dt-bindings: misc: tegra186-misc: Add missing compatible string
dt-bindings: misc: tegra-apbmisc: Add missing compatible strings
Link: https://lore.kernel.org/r/20200918150303.3938852-4-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc
Renesas ARM SoC updates for v5.10
- Make two local functions static.
* tag 'renesas-arm-soc-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: rcar-gen2: Make rcar_gen2_{timer_init, reserve}() static
Link: https://lore.kernel.org/r/20200918124800.15555-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc
AT91 SoC for 5.10
- ULP0 fast wakeup support
- PM cleanups
* tag 'at91-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: remove unnecessary at91sam9x60_idle
ARM: at91: pm: of_node_put() after its usage
ARM: at91: pm: add per soc validation of pm modes
ARM: at91: pm: add support for ULP0 fast wakeup
Link: https://lore.kernel.org/r/20200916211119.GA275438@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt2701:
- add jpeg enconder node
mt7623:
- refactor dts and add hdmi support
* tag 'v5.9-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mt7623: add missing pause for switchport
arm: dts: mt7623: add lima related regulator
arm: dts: mt7623: add display subsystem related device nodes
arm: dts: mt7623: move display nodes to separate mt7623n.dtsi
arm: dts: mt2701: Add jpeg enc device tree node
Link: https://lore.kernel.org/r/641d4d47-b7ad-42dd-f7a8-e028a1f64d70@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: amlogic updates for v5.10
- minor cleanup
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: move the L2 cache-controller inside the SoC node
Link: https://lore.kernel.org/r/7h7dsikjyt.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.10, round 1
Highlights:
----------
MCU part:
-Some changes on stm32h743: enable display controler, add SPI resets,
use "st,stm32h7-uart" compatible.
MPU part:
-Add new Odyssey SOM board based on STM32MP157CAC. It embeds 4GB eMMC, 512
MB DDR3 RAM, USB and ETH connectors and a combo wifi/BT (AP6236 chip).
-Add FMC2 EBI support on EV1 board.
-Add arm-pmu node.
-LXA:
-Change ethernet phy delays to avoid kernel warnings.
-Enable DDR50 eMMC mode.
-DH:
-Add new DH DRC02 unit board.
-Add USB OTG support on PDK2 board.
-Use uart8 RTS/CTS on PDK2 board.
-Fix display PWM channel on PDK2 board.
-Swap phy reset line and touchscreen irq on DHCOM SOM.
-Drop QSPI CS2 on DHCOM SOM.
-Update SDMMC pin config on AV96.
-Enable uart7 RTS/CTS on AV96.
* tag 'stm32-dt-for-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add arm-pmu node on stm32mp15
ARM: dts: stm32: add FMC2 EBI support for stm32mp157c
ARM: dts: stm32: lxa-mc1: enable DDR50 mode on eMMC
ARM: dts: stm32: Fix DH PDK2 display PWM channel
ARM: dts: stm32: Enable RTS/CTS for DH AV96 UART7
ARM: dts: stm32: Swap PHY reset GPIO and TSC2004 IRQ on DHCOM SOM
ARM: dts: stm32: use stm32h7 usart compatible string for stm32h743
ARM: dts: stm32: add resets property to spi device nodes on stm32h743
ARM: dts: stm32: add display controller node to stm32h743
ARM: dts: stm32: Enable RTS/CTS for DH PDK2 UART8
ARM: dts: stm32: Drop QSPI CS2 pinmux on DHCOM
ARM: dts: stm32: Add STM32MP1 UART8 RTS/CTS pinmux
ARM: dts: stm32: add initial support for stm32mp157-odyssey board
dt-bindings: arm: stm32: document Odyssey compatible
dt-bindings: vendor-prefixes: add Seeed Studio
ARM: dts: stm32: lxa-mc1: Fix kernel warning about PHY delays
ARM: dts: stm32: Add USB OTG support to DH PDK2
ARM: dts: stm32: Fix sdmmc2 pins on AV96
ARM: dts: stm32: Add DHSOM based DRC02 board
ARM: dts: stm32: Move ethernet PHY into DH SoM DT
Link: https://lore.kernel.org/r/7e2a93c9-cf37-bc93-ed6e-d9cb1808b7a3@st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 device tree change for 5.10:
- New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA
Orion board.
- update GPMI NAND node name to nand-controller for aligning with DT
schema.
- Remove the legacy fsl,spi-num-chipselects property from a few board.
- A series to update imx6q-logicpd support, using GPIO chipselect,
adding board compatible string, and enabling DTB build for the board.
- Complete RNG device node in i.MX6SL device tree, and add RNG node for
i.MX6SLL and i.MX6ULL.
- Correct interrupt flags for imx6qdl-gw5xxx boards.
- Add missing enet_out clock for i.MX6Q/DL Ethernet device.
- Enable PCIe support for imx6qp-sabreauto board.
- A series from Shengjiu Wang to add audio sound card for imx7d-sdb and
imx6sll-evk board, add headphone detection for sound card on a few NXP
development boards.
- A couple of minor fix-ups on i.MX25 pin functions.
- Some random update on various boards.
* tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
ARM: dts: imx6q-logicpd: Use GPIO chipselect
ARM: dts: imx: Add an entry for imx6q-logicpd.dtb
ARM: dts: imx6q-logicpd: Add a specific board compatible string
ARM: dts: imx6q: align GPIO hog names with dtschema
ARM: dts: imx6qdl-tqma6: fix LM75 compatible string
ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects
ARM: dts: imx6qdl-tqma6: fix indentation
ARM: dts: imx28-m28: Align GPMI NAND node name with schema
ARM: dts: imx6qdl: add enet_out clk support
ARM: dts: imx6qdl: move iomuxc compatible assignment out of root node
ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1
ARM: dts: imx: add devicetree for Tolino Shine 2 HD
ARM: dts: imx6qdl-gw553x: Remove unneeded #address-cells/#size-cells
ARM: dts: imx6sll-evk: Add audio sound card node
ARM: dts: imx6sl-evk: Add headphone detection for sound card
ARM: dts: imx6sx-sdb: Add headphone detection for sound card
ARM: dts: imx6q-kontron-samx6i: Remove old fsl,spi-num-chipselects
ARM: dts: imx: Fix the SPI chipselect polarity
ARM: dts: imx25-pinfunc: Fix GPT function names
...
Link: https://lore.kernel.org/r/20200923073009.23678-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Two fixes for the Allwinner SoCs, one for the H5 GPU support and one for
a misconfigured regulator on the Bananapi M2 Ultra.
* tag 'sunxi-fixes-for-5.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: remove Mali GPU PMU module
ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator
Link: https://lore.kernel.org/r/8a436328-b844-4599-8695-ab2088a00ade.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes
Tag fix up for TI serdes mux definition introduced in 5.9
* tag 'ti-k3-dt-fixes-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (637 commits)
arm64: dts: ti: k3-j721e: Rename mux header and update macro names
Linux 5.9-rc3
genirq/matrix: Deal with the sillyness of for_each_cpu() on UP
fsldma: fix very broken 32-bit ppc ioread64 functionality
kernel.h: Silence sparse warning in lower_32_bits
cifs: fix check of tcon dfs in smb1
KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception
KVM: arm64: Survive synchronous exceptions caused by AT instructions
KVM: arm64: Add kvm_extable for vaxorcism code
arm64: vdso32: make vdso32 install conditional
arm64: use a common .arch preamble for inline assembly
mfd: mfd-core: Ensure disabled devices are ignored without error
usb: storage: Add unusual_uas entry for Sony PSZ drives
md/raid5: make sure stripe_size as power of two
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
io_uring: don't bounce block based -EAGAIN retry off task_work
io_uring: fix IOPOLL -EAGAIN retries
arm64/cpuinfo: Remove unnecessary fallthrough annotation
media: dib0700: Fix identation issue in dib8096_set_param_override()
hwmon: (gsc-hwmon) Scale temperature to millidegrees
...
Link: https://lore.kernel.org/r/20200921125402.mtwypblhb45a6ssh@akan
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.10, part two
1. Further cleanup of DTS with dtschema: s5pv210, s3c6410 and s3c24xx.
This fixes many minor dtschema violations, adds few missing
functionalities (like clock for RTC) and improves the code
maintainability in few places. Except the RTC clock, this should not
have visible impact.
2. Fix few remaining Exynos dtschema violations.
* tag 'samsung-dt-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Goni
ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in Aquila
ARM: dts: s5pv210: move fixed regulators under root node in Goni
ARM: dts: s5pv210: move fixed regulators under root node in Aquila
ARM: dts: exynos: Align OPP table name with dt-schema
ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4
ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid
ARM: dts: exynos: add input clock to CMU in Exynos3250
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: override nodes by label
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s5pv210: correct ethernet unit address in SMDKV210
ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries
...
Link: https://lore.kernel.org/r/20200920160705.9651-3-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.10 (take two)
- PCIe endpoint support for the RZ/G2H SoC,
- SATA support for the HopeRun HiHope RZ/G2H board,
- Increase support (CAN, LED, SPI NOR, VIN, VSP) for the RZ/G1H SoC on
the iWave Qseven board (G21D), and its camera add-on board,
- Initial support for the R-Car V3U SoC on the Falcon CPU and BreakOut
boards,
- HDMI display and sound support for the R-Car M3-W+ SoC on the
Salvator-XS board,
- Digital Radio Interface (DRIF) support for the R-Car E3 SoC,
- Minor fixes and cleanups.
* tag 'renesas-arm-dt-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Fix MSIOF1 DMA channels
arm64: dts: renesas: r8a77990: Add DRIF support
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DB
ARM: dts: r8a7742: Add VSP support
arm64: dts: renesas: Drop superfluous pin configuration containers
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Sound support
arm64: dts: renesas: r8a77961: salvator-xs: Add HDMI Display support
arm64: dts: renesas: r8a77961: Add HDMI device nodes
arm64: dts: renesas: r8a77961: Add DU device nodes
arm64: dts: renesas: r8a77961: Add VSP device nodes
arm64: dts: renesas: r8a77961: Add FCP device nodes
arm64: dts: renesas: Fix pin controller node names
ARM: dts: renesas: Fix pin controller node names
arm64: dts: renesas: Add Renesas Falcon boards support
arm64: dts: renesas: Add Renesas R8A779A0 SoC support
ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication
ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
ARM: dts: r8a7742: Add VIN DT nodes
...
Link: https://lore.kernel.org/r/20200918124800.15555-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The Synopsys DesignWare APB GPIO controller driver does not parse
reg-io-width and dtschema does not allow it so drop it to fix dtschema
warnings like:
arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dt.yaml: gpio@20000:
'reg-io-width' does not match any of the regexes: '^gpio-(port|controller)@[0-9a-f]+$', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20200917164909.22490-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add ARCH_PICOXCELL entries to Makefil so the DTBs get built with
`make dtbs`.
Link: https://lore.kernel.org/r/20200917163957.21895-1-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
