summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2020-09-11ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4Krzysztof Kozlowski
The purpose of those assigned-clock-* properties is to configure clock for the I2S device so move them to respective node. This silences the dtschema warnings like: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-3-krzk@kernel.org
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos4412 OdroidKrzysztof Kozlowski
Commit 68605101460e ("ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3") added assigned clocks under Clock Management Unit. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-2-krzk@kernel.org
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos3250Krzysztof Kozlowski
Commit 52005dece527 ("ARM: dts: Add assigned clock parents to CMU node for exynos3250") added assigned clocks under Clock Management Unit to fix hangs when accessing ISP registers. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-1-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416Krzysztof Kozlowski
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: xti@0:reg:0: [0] is too short clocks: 'ranges' is a required property xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-12-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: add address to CPU nodeKrzysztof Kozlowski
The CPU nodes should be described as children of "cpus" bus node with appropriate "reg" properties: cpus: '#address-cells' is a required property cpus: '#size-cells' is a required property cpu: 'device_type' is a required property cpu: 'reg' is a required property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-11-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: align PWM/timer node name with dtschemaKrzysztof Kozlowski
Although PWM is used on S3C24xx as clocksource/timer, the dtschema expects the node to be named in certain format: timer@51000000: $nodename:0: 'timer@51000000' does not match '^pwm(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-10-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: override nodes by labelKrzysztof Kozlowski
Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-9-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: fix number of PWM cellsKrzysztof Kozlowski
The PWM has only three cells, not four, as pointed out by dtschema: timer@51000000: #pwm-cells:0:0: 3 was expected Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-8-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: remove additional CPU compatibleKrzysztof Kozlowski
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema: cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-7-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410Krzysztof Kozlowski
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-6-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410Krzysztof Kozlowski
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-5-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410Krzysztof Kozlowski
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-4-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in Mini6410Krzysztof Kozlowski
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-3-krzk@kernel.org
2020-09-11ARM: dts: s5pv210: correct ethernet unit address in SMDKV210Krzysztof Kozlowski
The SROM bank 5 is at address 0xa8000000, just like the one put in "reg" property of ethernet node. Fix the unit address of ethernet node. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-2-krzk@kernel.org
2020-09-11ARM: dts: renesas: Fix pin controller node namesGeert Uytterhoeven
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200821112351.5518-1-geert+renesas@glider.be
2020-09-11dma-direct: rename and cleanup __phys_to_dmaChristoph Hellwig
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try to improve the situation by renaming __phys_to_dma to phys_to_dma_unencryped, and not forcing architectures that want to override phys_to_dma to actually provide __phys_to_dma. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11dma-direct: remove __dma_to_physChristoph Hellwig
There is no harm in just always clearing the SME encryption bit, while significantly simplifying the interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-11ARM: config: aspeed_g5: Enable IBM OP Panel driverJoel Stanley
The IBM op-panel driver requires i2c slave mode. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-11ARM: config: aspeed-g5: Enable I2C GPIO mux driverJoel Stanley
Used by rainier and q71l. Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-11ARM: config: aspeed: Fix selection of media driversJoel Stanley
In the 5.7 merge window the media kconfig was restructued. For most platforms these changes set CONFIG_MEDIA_SUPPORT_FILTER=y which keeps unwanted drivers disabled. The exception is if a config sets EMBEDDED or EXPERT (see b0cd4fb27665). In that case the filter is set to =n, causing a bunch of DVB tuner drivers (MEDIA_TUNER_*) to be accidentally enabled. This was noticed as it blew out the build time for the Aspeed defconfigs. Enabling the filter means the Aspeed config also needs to set CONFIG_MEDIA_PLATFORM_SUPPORT=y in order to have the CONFIG_VIDEO_ASPEED driver enabled. Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers") Fixes: b0cd4fb27665 ("media: Kconfig: on !EMBEDDED && !EXPERT, enable driver filtering") Signed-off-by: Joel Stanley <joel@jms.id.au> Cc: stable@vger.kernel.org CC: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-11ARM: dts: aspeed: Add Mowgli BMC platformBen Pai
The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server. Signed-off-by: Ben Pai <Ben_Pai@wistron.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200909090818.24021-1-ben_pai@wistron.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-11crypto: arm/aes-neonbs - Use generic cbc encryption pathHerbert Xu
Since commit b56f5cbc7e08ec7d31c42fc41e5247677f20b143 ("crypto: arm/aes-neonbs - resolve fallback cipher at runtime") the CBC encryption path in aes-neonbs is now identical to that obtained through the cbc template. This means that it can simply call the generic cbc template instead of doing its own thing. This patch removes the custom encryption path and simply invokes the generic cbc template. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-10Merge tag 'tags/bcm2835-dt-next-2020-09-08' into devicetree/nextFlorian Fainelli
Maxime Ripard enables vc4 on BCM2711 (RPi4), which among other things adds HDMI functionality (no 4K yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: broadcom: Fix SP804 nodeAndre Przywara
The DT binding for SP804 requires to have an "arm,primecell" compatible string. Add this string so that the Linux primecell bus driver picks the device up and activates the clock. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> [florian: added compatible to ccbtimer1] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: NSP: Fix SP805 clock-namesAndre Przywara
The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for the Broadcom NSP platform to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: Cygnus: Fix SP805 clocksAndre Przywara
The SP805 DT binding requires two clocks to be specified, but the Broadcom Cygnus DT currently only specifies one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: dts: NSP: replace status value "ok" by "okay"Adrian Schmutzler
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10ARM: BCM5301X: Add DT for Meraki MR32Christian Lamparter
add support for the Cisco Meraki MR32. This is a dual-band enterprise class 802.11ac access point. The unit was donated by Chris Blake. Thank you! SoC: Broadcom BCM53016A1 (1 GHz, 2 cores) RAM: 128 MiB NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable) ETH: 1GBit Ethernet Port - PoE WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352) WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352) WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428) BLE: Broadcom BCM20732 (ttyS1) LEDS: 1 x Programmable RGB Status LED (driven by a PWM) 1 x White LED (GPIO) 1 x Orange LED Fault Indicator (GPIO) 2 x LAN Activity / Speed LEDs (On the RJ45 Port) BUTTON: one Reset button MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC) ina219 hardware monitor (i2c) Kensington Lock SERIAL: WARNING: The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 115200-8-N-1. The board has a populated right angle 1x4 0.1" pinheader. The pinout is: VCC, RX, TX, GND. Odd stuff: - uart0 clock frequency is 62.5 MHz. - The LEDs are labeled as SYS-LED1 through SYS-LED3 because of the silkscreen on the PCB. - the original u-boot has been compiled with most functions and commands disabled. The u-boot env isn't setup properly either and as a result, the bcm47xxpart probing is not working. Hence, the nand partitions are specified through a "fixed-partition" binding. - The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is connected to uart2 of the SoC. The BCM20732 does not provide a HCI. So the linux' bluetooth stack is useless. The mock-up node with the compatible binding and enable-gpios property is provided solely as documentation. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-10net: dsa: microchip: look for phy-mode in port nodesHelmut Grohne
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/ Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10ARM: shmobile: rcar-gen2: Make rcar_gen2_{timer_init, reserve}() staticGeert Uytterhoeven
As of commit 1e90fea35b80cfe1 ("ARM: shmobile: r8a7791: Use common R-Car Gen2 machine definition"), there are no more users of rcar_gen2_timer_init() and rcar_gen2_reserve() outside arch/arm/mach-shmobile/setup-rcar-gen2.c. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200908074403.4379-1-geert+renesas@glider.be
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indicationLad Prabhakar
Add support for LED trigger on SD2 interface. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier boardLad Prabhakar
This patch enables CAN1 interface exposed through connector J20 on the carrier board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR supportLad Prabhakar
Add support for the SPI NOR device which is connected to MSIOF0 interface on the iWave RainboW-G21d-q7 board. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200907155541.2011-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: dts: r8a7742: Add VIN DT nodesLad Prabhakar
Add VIN[0123] instances found in the r8a7742 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20200907144509.8861-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-10ARM: omap2plus_defconfig: enable generic net optionsGrygorii Strashko
Enable set of generic, widely used, networking options: - basic QoS, filter and actions - VLAN support - Bridge support Use "M" build option where possible. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: omap2plus_defconfig: enable twl4030_madc as a loadable moduleAndreas Kemnade
The ADC is used by twl4030_charger to read voltages. If a dtb contains the ADC but the module is not build, probing twl4030_charger will be endlessly deferred, so just enable CONFIG_TWL4030_MADC in the config. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: dra7: drop legacy cpsw dt nodeGrygorii Strashko
All dra7/am57 boards converted to use new driver, so drop legacy cpsw dt node. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drvGrygorii Strashko
Switch CompuLab CL-SOM-AM57x board to use new cpsw switch driver. Those board configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: dra7x-evm: switch to new cpsw switch drvGrygorii Strashko
Switch all TI DRA7x boards to use new cpsw switch driver. Those boards configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: beagle-x15: switch to new cpsw switch drvGrygorii Strashko
Switch all TI AM5728 BeagleBoard-X15 boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am57xx-idk: switch to new cpsw switch drvGrygorii Strashko
Switch all am571/2/4-idk boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am5729: beagleboneai: switch to new cpsw switch drvGrygorii Strashko
Switch BeagleBone AI to use new cpsw switch driver. It has one Ext. port only and fits dual_mac mode with no issues. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: am43xx: replace status value "ok" by "okay"Adrian Schmutzler
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: dra7xx: replace status value "ok" by "okay"Adrian Schmutzler
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: omap: replace status value "ok" by "okay"Adrian Schmutzler
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: n9, n950: Remove nokia,nvm-size propertySakari Ailus
Remove nokia,nvm-size property as it is no longer needed. The driver can nowadays figure out the size so do not specify it in DT. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-09-10ARM: dts: rainier: Disable internal pull-downs on eMMC pinsAndrew Jeffery
There's a veritable tug-of-war going on in the design, so disable one of the warring parties. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200910031143.2997298-1-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-09-09ARM: dts: BCM5301X: Fixed QSPI compatible stringFlorian Fainelli
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-09ARM: dts: NSP: Fixed QSPI compatible stringFlorian Fainelli
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-09ARM: dts: bcm: HR2: Fixed QSPI compatible stringFlorian Fainelli
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-20 23:30:50 +0000