summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2021-01-30ARM: dts: imx6: RDU2: enable RMI4 reduced reportingLucas Stach
To use the reduced reporting mode the threshold values need to be set explicitly. Configure the threshold to be less than 0.5% of the full touchscreen range. This seems to be a good compromise between system load and input accurancy. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-30ARM: dts: imx6: RDU2: reduce i2c drive-strengthLucas Stach
The current 25 Ohm drive-strength is much too strong, resulting in significant overshoot of the signal. Reduce the drive-strength to 75 Ohm to get rid of those issues. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-30ARM: dts: imx6: rdu2: enable WDOG1Philipp Zabel
Enable the i.MX6 WDOG1 internal watchdog for warm reboots. This allows to issue emergency restarts without clearing the RAM, so collecting oops logs from ramoops pstore in barebox becomes feasible. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-30Merge tag 'tegra-for-5.12-arm-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.12-rc1 Fixes the pinmux configuration for the eMMC on the Ouya to fix issues with certain bootloaders. * tag 'tegra-for-5.12-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: ouya: Fix eMMC on specific bootloaders Link: https://lore.kernel.org/r/20210129193254.3610492-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-30Merge tag 'tegra-for-5.12-arm-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig ARM: tegra: Default configuration changes for v5.12-rc1 Enables the Tegra SoC thermal driver on 32-bit platforms such as Tegra124. * tag 'tegra-for-5.12-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: config: Enable Tegra SoC Thermal driver Link: https://lore.kernel.org/r/20210129193254.3610492-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-30Merge tag 'tegra-for-5.12-arm-core' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc ARM: tegra: Core changes for v5.12-rc1 This contains a single fix that helps properly track the enable state for various PLLs during suspend/resume. * tag 'tegra-for-5.12-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Don't enable unused PLLs on resume from suspend Link: https://lore.kernel.org/r/20210129193254.3610492-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-29ARM: tegra: ouya: Fix eMMC on specific bootloadersPeter Geis
Ouya fails to detect the eMMC module when booted via certain bootloaders. Fastboot and hard-kexec bootloaders fail while u-boot does not. It was discovered that the issue manifests if the sdmmc4 alternate configuration clock pin is input disabled. Ouya uses sdmmc4 in the primary pin configuration. It is unknown why this occurs, though it is likely related to other eMMC limitations experienced on Ouya. For now, fix it by enabling input on cam_mclk_pcc0. Fixes: d7195ac5c9c5 ("ARM: tegra: Add device-tree for Ouya") Reported-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-01-29Merge tag 'omap-for-v5.12/soc-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc SoC changes for omaps for v5.12 merge window Update email address for Roger and fix a typo * tag 'omap-for-v5.12/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: fix spellint typo MAINTAINERS: Update address for OMAP GPMC driver Link: https://lore.kernel.org/r/pull-1611845066-809577@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-29Merge tag 'omap-for-v5.12/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.12 merge window This includes the following earlier patches that were considered too late for v5.11 as discussed between Arnd and me on freenode #armlinux in December: - More updates to use cpsw switchdev driver - Enable gta04 PMIC power management - Updates for dra7 for ECC support, 1.8GHz speed and keep the ldo0 regulator always on as specified in the data manual And then we have the new devicetree changes: - Configure the original Amazon Echo to for audio - Configure missing thermal interrupt for omap4430 - Configure mapphone devices for passive thermal cooling, and add 1.2GHz mode. - Correct omap4430 sgx clock rate to use the runtime Android kernel value, the earlier value was for a lower power operating point - Drop turbo mode for 1GHz omap3 variants as we now have passive cooling configured - Update email address for Javier - Add new MYIR Tech Limited board support * tag 'omap-for-v5.12/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited board ARM: dts: omap3-igep: Change email address in copyright notice ARM: dts: omap36xx: Remove turbo mode for 1GHz variants ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor kernel ARM: dts: motorola-mapphone: Add 1.2GHz OPP ARM: dts: motorola-mapphone: Configure lower temperature passive cooling ARM: dts: Configure missing thermal interrupt for 4430 ARM: dts: omap3-echo: Add speaker sound card support ARM: dts: dra71-evm: mark ldo0 regulator as always on ARM: dts: dra76x: add support for OPP_PLUS ARM: dts: am574x-idk: add support for EMIF1 ECC ARM: dts: omap3-gta04: fix twl4030-power settings ARM: dts: am335x-evm/evmsk/icev2: switch to new cpsw switch drv ARM: dts: am33xx-l4: add dt node for new cpsw switchdev driver Link: https://lore.kernel.org/r/pull-1611845066-809577@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-29Merge tag 'stm32-dt-for-v5.12-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.12, round 1 Highlights: ---------- MCU part: -Rename mmc nodes to match with yaml validation. MPU part: -Rename mmc nodes to match with yaml validation. -Move vdda1v1 & vdda1v8 (used by usbphyc) from boards files to SoC dtsi file. -LXA: -Fix leds schema for yaml validation. -DH: -Enable SDMMC1 internal pull-ups and disable CKIN feedabck clock on DHCOM. -Add SDMMC1 init state inorder to use some gpios during probing phase. -Disable KS8851 and FMC on PicoITX board. * tag 'stm32-dt-for-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: add #clock-cells property to usbphyc node on stm32mp151 ARM: dts: stm32: remove usbphyc ports vdda1v1 & vdda1v8 on stm32mp15 boards ARM: dts: stm32: add usbphyc vdda1v1 and vdda1v8 supplies on stm32mp151 ARM: dts: stm32: Add STM32MP1 I2C6 SDA/SCL pinmux ARM: dts: stm32: Rename mmc controller nodes to mmc@ ARM: dts: stm32: Enable voltage translator auto-detection on DHCOM ARM: dts: stm32: Add additional init state for SDMMC1 pins ARM: dts: stm32: Disable KS8851 and FMC on PicoITX board ARM: dts: stm32: Fix schema warnings for pwm-leds on lxa-mc1 ARM: dts: stm32: Disable SDMMC1 CKIN feedback clock on DHCOM ARM: dts: stm32: Enable internal pull-ups for SDMMC1 on DHCOM SoM ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX ARM: dts: stm32: Fix GPIO hog names on DHCOM ARM: dts: stm32: Disable optional TSC2004 on DRC02 board ARM: dts: stm32: Disable WP on DHCOM uSD slot ARM: dts: stm32: Connect card-detect signal on DHCOM ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect Link: https://lore.kernel.org/r/5e8897a0-8f68-5e41-bfa0-ccdf1e23a3c1@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-29ARM: multi_v7_defconfig: add STM32 CEC supportYannick Fertre
Enable CEC support for STMicroelectronics as loadable module. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20210129084842.29123-1-alexandre.torgue@foss.st.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-29ARM: dts: armada388-helios4: assign pinctrl to each fanRosen Penev
Split up the pins for each fan. This is needed in order to control them Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-01-29ARM: dts: armada388-helios4: assign pinctrl to LEDsRosen Penev
Split up the pins to match earlier definitions. Allows LEDs to flash properly. Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-01-29ARM: dts: armada-385-linksys: fix usage with newer devicesRosen Penev
Newer Linksys boards might come with a Winbond W29N02GV which can be configured in different ways. Make sure we configure it the same way as the older chips so everything keeps working. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-01-29ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressorDmitry Osipenko
The tegra_uart_config of the DEBUG_LL code is now placed right at the start of the .text section after commit which enabled debug output in the decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled since tegra_uart_config data is executes as a code. Fix the misplaced tegra_uart_config storage by embedding it into the code. Cc: stable@vger.kernel.org Fixes: 2596a72d3384 ("ARM: 9009/1: uncompress: Enable debug in head.S") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-01-29ARM: footbridge: fix dc21285 PCI configuration accessorsRussell King
Building with gcc 4.9.2 reveals a latent bug in the PCI accessors for Footbridge platforms, which causes a fatal alignment fault while accessing IO memory. Fix this by making the assembly volatile. Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-01-29ARM: imx: Remove unused IMX_GPIO_NR() macroFabio Estevam
The IMX_GPIO_NR() macro was only used by non-DT i.MX platforms. As i.MX transitioned to a DT-only platform, get rid of this unused macro. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-29ARM: dts: stm32: add #clock-cells property to usbphyc node on stm32mp151Amelie Delaunay
usbphyc is a 48Mhz clock provider: the clock can be used as clock source for USB OTG. Add #clock-cells property to usbphyc node to reflect this capability. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-29ARM: dts: stm32: remove usbphyc ports vdda1v1 & vdda1v8 on stm32mp15 boardsAmelie Delaunay
vdda1v1 and vdda1v8 supplies are required by USB PLL, not by the PHYs. Remove them from usbphyc child phy nodes now that they are managed in usbphyc parent node at SoC level. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-29ARM: dts: stm32: add usbphyc vdda1v1 and vdda1v8 supplies on stm32mp151Amelie Delaunay
vdda1v1 and vdda1v8 supplies are required by USB PLL. Add them in usbphyc node. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-29ARM: dts: stm32: Add STM32MP1 I2C6 SDA/SCL pinmuxJagan Teki
Add SDA/SCL pinmux lines for I2C6 on STM32MP1. This support adds both in default and sleep states. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-01-29ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameterRussell King
Increase the SmartEEE Tw parameter for Atheros PHYs to stop gigabit links from sporadically dropping. Jon Nettleton found that a value of 23 was the minimum to give a stable link, but testing with the Com Express 7 module shows 24 is the minimum - so 23 may still be on the margins. Use 24 instead for consistency across SolidRun platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-29Merge tag 'imx-fixes-5.11-2' into imx/dtShawn Guo
i.MX fixes for 5.11, round 2: - Fix pcf2127 reset for imx7d-flex-concentrator board. - Fix i.MX6 suspend with Thumb-2 kernel. - Fix ethernet-phy address issue on imx6qdl-sr-som board. - Fix GPIO3 `gpio-ranges` on i.MX8MP. - Select SOC_BUS for IMX_SCU driver to fix build issue.
2021-01-28Merge tag 'tags/bcm2835-dt-next-2021-01-28' into devicetree/nextFlorian Fainelli
Maxime enables CEC support on both RPi4 HDMI ports Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'arm-soc-fixes-v5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the current arm-soc bug fixes for linux-5.11. I already merged a larger set that just came in during the past three days but has not had much exposure in linux-next, but this is the subset I merged last week. Most of these are for the NXP i.MX platform (descriptions from their pull request): - Fix pcf2127 reset for imx7d-flex-concentrator board. - Fix i.MX6 suspend with Thumb-2 kernel. - Fix ethernet-phy address issue on imx6qdl-sr-som board. - Fix GPIO3 `gpio-ranges` on i.MX8MP. - Select SOC_BUS for IMX_SCU driver to fix build issue. - Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from #pwm-cells conversion. - Fix duplicated bus node name for i.MX8MN SoC. - Fix reset register offset on LS1028A SoC. - Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device index consistent with previous kernel version. - Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure with i.MX8M SoC driver. - Fix typos with status property on imx6qdl-kontron-samx6i board. - Fix duplicated regulator-name on imx6qdl-gw52xx board. Aside from i.MX, the bugfixes are all over the place: - Coccinelle found a refcount imbalance on integrator - defconfig fix for TI K3 - A boot regression fix for ST ux500 - A code preemption fix for the optee driver - USB DMA regression on Broadcom Stingray - A bogus boot time warning fix for at91 code" * tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Include bcm2835 subsequents into search arm64: dts: broadcom: Fix USB DMA address translation for Stingray drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[] drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs tee: optee: replace might_sleep with cond_resched firmware: imx: select SOC_BUS to fix firmware build arm64: dts: imx8mp: Correct the gpio ranges of gpio3 ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms ARM: imx: build suspend-imx6.S with arm instruction set ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset ARM: dts: ux500: Reserve memory carveouts arm64: defconfig: Drop unused K3 SoC specific options bus: arm-integrator-lm: Add of_node_put() before return statement ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status ARM: imx: fix imx8m dependencies ARM: dts: tbs2910: rename MMC node aliases arm64: dts: ls1028a: fix the offset of the reset register arm64: dts: imx8mn: Fix duplicate node name ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight
2021-01-28ARM: dts: bcm2711: Add the CEC interrupt controllerMaxime Ripard
The CEC and hotplug interrupts go through an interrupt controller shared between the two HDMI controllers. Let's add that interrupt controller and the interrupts for both HDMI controllers Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210111142309.193441-16-maxime@cerno.tech
2021-01-28Merge tag 'omap-for-v5.11/fixes-rc5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.11-rc cycle The recent changes to switch SoCs to boot with ti-sysc interconnect target module driver and genpd caused few regressions: - The omap_prm reset driver needs to clear any reset bits deasserted by the bootloader or kexec boot for the three reset bit cases. Otherwise we can have an oops with accelerators starting to boot with potentially unconfigured MMU for example - Custom kernel configs are not automatically selecting simple-pm-bus driver that we now need to probe interconnects so we need to select it always - We are not passing legacy platform data in auxdata with simple-pm-bus like we do for simple-bus. We need to pass auxdata to simple-pm-bus so it can pass it to of_platform_populate() Then recent RCU changes started causing splats for cpuidle44xx that now need RCU_NONIDLE added to the calls in several places And then we have few device specific fixes: - We need to remove legacy spi-cs-hig for gta04 display to work, and set the gpio to active low - Omap1 specific ohci-omap needs to call gpio_free() - Droid4 needs to use padconf interrupt for the slider as the edge gpio interrupts may be lost for deeper idle states * tag 'omap-for-v5.11/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4 drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled ARM: dts; gta04: SPI panel chip select is active low soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1 ARM: OMAP1: OSK: fix ohci-omap breakage DTS: ARM: gta04: remove legacy spi-cs-high to make display work again Link: https://lore.kernel.org/r/pull-1611818709-243493@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-26ARM: zImage: atags_to_fdt: Fix node names on added root nodesRob Herring
Commit 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call") exposed a bug creating DT nodes in the ATAGS to DT fixup code. Non-existent nodes would mistaken get created with a leading '/'. The problem was fdt_path_offset() takes a full path while creating a node with fdt_add_subnode() takes just the basename. Since this we only add root child nodes, we can just skip over the '/'. Fixes: 7536c7e03e74 ("of/fdt: Remove redundant kbasename function call") Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Qi Zheng <arch0.zheng@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210126023905.1631161-1-robh@kernel.org
2021-01-26Merge tag 'samsung-drivers-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung SoC drivers changes for v5.12 1. Adjust deferred probe and handle regmap_read() errors in Exynos ASV driver. 2. Convert the ChipID code into a driver (from a early initcall) and merge it into the Exynos ASV. 3. Convert the PM domains code into a driver. This is necessary for upcoming code enabling fw_devlinks. * tag 'samsung-drivers-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: pm_domains: Convert to regular platform driver soc: samsung: exynos-chipid: correct helpers __init annotation soc: samsung: exynos-chipid: convert to driver and merge exynos-asv soc: samsung: exynos-asv: handle reading revision register error soc: samsung: exynos-asv: don't defer early on not-supported SoCs Link: https://lore.kernel.org/r/20210125191240.11278-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-26Merge tag 'stm32-dt-for-v5.11-fixes-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.11, round 1 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix DRC02 uSD card detect polarity - use uSD card detect on DHCOM - Disable uSD WP on DHCOM - Disable TSC2004 on DRC02 - Fix GPIO hogs on DHCOM boards * tag 'stm32-dt-for-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX ARM: dts: stm32: Fix GPIO hog names on DHCOM ARM: dts: stm32: Disable optional TSC2004 on DRC02 board ARM: dts: stm32: Disable WP on DHCOM uSD slot ARM: dts: stm32: Connect card-detect signal on DHCOM ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect Link: https://lore.kernel.org/r/b7379980-857e-736a-85d8-58e2bd300141@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-26ARM: omap2plus_defconfig: Update for dropped optionsTony Lindgren
Update omap2plus_defconfig for the following options that got dropped: - We have now default y for MEMCG_SWAP and SECCOMP with the options already in omap2plus_defconfig - The ZBOOT_ROM values now default to 0 - ARM_TI_CPUFREQ no longer exists and we're using the generic driver now that selects DT_IDLE_STATES - POWER_AVS option no longer exists - The MEDIA and VIDEO related options are now selected when we have CONFIG_MEDIA_SUPPORT_FILTER not set - CEC_PLATFORM_DRIVERS no longer exists - MEDIA_SUBDRV_AUTOSELECT is not selected by default Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: omap2plus_defconfig: Update for moved optionsTony Lindgren
Update for the following moved options to make applying defconfig related patches easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: OMAP2+: fix spellint typoWang Qing
Change the comment typo: "ununsed" -> "unused". Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: am335x-myirtech-*: Add DT for AM335X MYIR Tech Limited boardAlexander Shiyan
This patch adds basic support for MYIR Tech MYC-AM335X CPU Module: - Up to 1GHz TI AM335X Series ARM Cortex-A8 Processors - Up to 512MB DDR3 SDRAM - Up to 512MB Nand Flash and MYD-AM335X Development Board: - MYC-AM335X CPU Module as Controller Board - Serial ports, 4 x USB Host, OTG, 2 x Gigabit Ethernet, CAN, RS485, TF, Audio - Supports HDMI and LCD Display Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: omap3-igep: Change email address in copyright noticeJavier Martinez Canillas
I've switched employer a long time ago and the mentioned email address no longer exists. Use my personal address to prevent the issue in the future. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: omap36xx: Remove turbo mode for 1GHz variantsAdam Ford
Previously, the 1GHz variants were marked as a turbo, because that variant has reduced thermal operating range. Now that the thermal throttling is in place, it should be safe to remove the turbo-mode from the 1GHz variants, because the CPU will automatically slow if the thermal limit is reached. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: omap443x: Correct sgx clock to 307.2MHz as used on motorola vendor ↵Carl Philipp Klemm
kernel The Android vendor kernel uses 307.2MHz or a divider ratio of /5 while active 153600000 or /10 is only used when the sgx core is inactive. Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: motorola-mapphone: Add 1.2GHz OPPCarl Philipp Klemm
The omap4430 HS HIGH performance devces support 1.2GHz opp, lower speed variants do not. However for mapphone devices Motorola seems to have decided that this does not really matter for the SoC variants they have tested to use, and decided to clock all devices, including the ones with STANDARD performance chips at 1.2GHz upon release of the 3.0.8 vendor kernel shiped with Android 4.0. Therefore it seems safe to do the same, but let's only do it for Motorola devices as the others have not been tested. Note that we prevent overheating with the passive cooling device cpu_alert0 configured in the dts file that starts lowering the speed as needed. This also removes the "failed to find current OPP for freq 1200000000" warning. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz> [tony@atomide.com: made motorola specific, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: motorola-mapphone: Configure lower temperature passive coolingTony Lindgren
The current cooling device temperature is too high at 100C as we have a battery on the device right next to the SoC as pointed out by Carl Philipp Klemm <philipp@uvos.xyz>. Let's configure the max temperature to 80C. As we only have a tshut interrupt and no talert interrupt on 4430, we have a passive cooling device configured for 4430. However, we want the poll interval to be 10 seconds instead of 1 second for power management. The value of 10 seconds seems like plenty of time to notice the temperature increase above the 75C temperatures. Having the bandgap temperature change seems to take several tens of seconds because of heat dissipation above 75C range as monitored with a full CPU load. Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Suggested-by: Carl Philipp Klemm <philipp@uvos.xyz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: Configure missing thermal interrupt for 4430Tony Lindgren
We have gpio_86 wired internally to the bandgap thermal shutdown interrupt on 4430 like we have it on 4460 according to the TRM. This can be found easily by searching for TSHUT. For some reason the thermal shutdown interrupt was never added for 4430, let's add it. I believe this is needed for the thermal shutdown interrupt handler ti_bandgap_tshut_irq_handler() to call orderly_poweroff(). Fixes: aa9bb4bb8878 ("arm: dts: add omap4430 thermal data") Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: omap3-echo: Add speaker sound card supportAndré Hentschel
This adds audio playback to the first generation Amazon Echo Signed-off-by: André Hentschel <nerv@dawncrow.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-01-26ARM: dts: rockchip: assign a fixed index to mmc devices on rv1108 boardsJohan Jonker
Recently introduced async probe on mmc devices can shuffle block IDs. Pin them to fixed values to ease booting in environments where UUIDs are not practical. Use newly introduced aliases for mmcblk devices from [1]. The sort order is based on reg address. [1] https://patchwork.kernel.org/patch/11747669/ Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210118155242.7172-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-26ARM: dts: rockchip: assign a fixed index to mmc devices on rk322x boardsJohan Jonker
Recently introduced async probe on mmc devices can shuffle block IDs. Pin them to fixed values to ease booting in environments where UUIDs are not practical. Use newly introduced aliases for mmcblk devices from [1]. The sort order is based on reg address. [1] https://patchwork.kernel.org/patch/11747669/ Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210118155242.7172-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-26ARM: dts: rockchip: Remove bogus "amba" bus nodesRobin Murphy
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful purpose, and certainly bear no relation at all to the actual underlying interconnect topology. They appear to be cargo-cult copying from a design misstep in the very early days of FDT adoption on ARM, which was righted with the "arm,primecell" compatible, and the last trace of the idea finally purged by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus""). As such, they can simply be removed and the DMA-330 nodes fitted into the normal sort order. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/e682edd25133bde2ed8198138febc90071530a51.1611186142.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-25ARM: dts: bcm21664: Replace spaces with a tabStanislav Jakubek
Fix checkpatch warning: WARNING: please, no spaces at the start of a line Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-25Merge tag 'tags/bcm2835-soc-next-2021-01-25' into soc/nextFlorian Fainelli
Select BRCMSTB_L2_IRQ as it's now used on Raspberry Pi 4 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-25ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835Maxime Ripard
The BCM2711 has a number of instances of interrupt controllers handled by the driver behind the BRCMSTB_L2_IRQ Kconfig option (irq-brcmstb-l2). Let's select that driver as part of the ARCH_BCM2835 Kconfig option. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210111142309.193441-1-maxime@cerno.tech
2021-01-25ARM: multi_v7_defconfig: Enable nvmem's rmem driverNicolas Saenz Julienne
It'll be used by the RPi4 family of boards to access its bootloader configuration. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210112142342.7290-1-nsaenzjulienne@suse.de
2021-01-25ARM: dts: bcm2711: Add the BSC interrupt controllerMaxime Ripard
The BSC controllers used for the HDMI DDC have an interrupt controller shared between both instances. Let's add it to avoid polling. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210111142309.193441-1-maxime@cerno.tech
generated by cgit (git 2.34.1) at 2025-09-16 17:49:12 +0000