summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2017-07-27ARM: dts: r8a7790: Add Inter Connect RAMGeert Uytterhoeven
R-Car H2 has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r8a7745: Add Inter Connect RAMGeert Uytterhoeven
RZ/G1E has 3 regions of Inter Connect RAM (72 + 4 + 256 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r8a7743: Add Inter Connect RAMGeert Uytterhoeven
RZ/G1M has 3 regions of Inter Connect RAM (72 + 4 + 256 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: iwg20d-q7: Add Ethernet AVB supportBiju Das
Define the iWave RainboW-G20D-Qseven board dependent part of the Ethernet AVB device node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r8a7743: Add Ethernet AVB supportBiju Das
Add Ethernet AVB support for r8a7743 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: iwg20d-q7: Add pinctl support for scif0Biju Das
Adding pinctrl support for scif0 interface. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r8a7743: Add GPIO supportBiju Das
Describe GPIO blocks in the R8A7743 device tree. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: sk-rzg1m: add Ether pinsSergei Shtylyov
Add the (previously omitted) Ether/PHY pin data to the SK-RZG1M board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: sk-rzg1m: add SCIF0 pinsSergei Shtylyov
Add the (previously omitted) SCIF0 pin data to the SK-RZG1M board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r8a7743: add PFC supportSergei Shtylyov
Define the generic R8A7743 part of the PFC device node. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: koelsch: Add generic compatible string for I2C EEPROMJavier Martinez Canillas
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: r7s72100: Add generic compatible string for I2C EEPROMJavier Martinez Canillas
The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: multi_v7_defconfig: Enable DMA for Renesas serial portsGeert Uytterhoeven
DMA for (H)SCIF(A|B) serial ports on Renesas R-Car Gen2 and RZ/G1 SoCs is considered stable, hence enable it by default. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: multi_v7_defconfig: Replace DRM_RCAR_HDMI by generic bridge optionsGeert Uytterhoeven
The manual bridge implementation was removed in favor of the generic one, so now we need to enable standard bridge drivers like DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511. Both were already enabled, but the (newer) ADV7511 audio part wasn't. Fixes: 5c602531feb3db39 ("drm: rcar-du: Replace manual bridge implementation with DRM bridge") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: multi_v7_defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARDGeert Uytterhoeven
SND_SOC_RSRC_CARD was renamed SND_SIMPLE_SCU_CARD, hence update multi_v7_defconfig. Fixes: d12c6216c4a58f9f ("ASoC: rsrc-card: rename rsrc-card to simple-scu-card phase3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: shmobile: defconfig: RefreshGeert Uytterhoeven
- Several options were moved, - INPUT_MOUSEDEV_PSAUX is no longer enabled by default since commit 73d8ef76006b649f ("Input: mousedev - stop offering PS/2 to userspace by default"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: shmobile: defconfig: Enable DMA for serial portsGeert Uytterhoeven
DMA for (H)SCIF(A|B) serial ports on R-Car Gen2 and RZ/G1 SoCs is considered stable, hence enable it by default. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge optionsGeert Uytterhoeven
The manual bridge implementation was removed in favor of the generic one, so now we need to enable standard bridge drivers like DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511. DRM_I2C_ADV7511 was already enabled, but the (newer) audio part wasn't. Fixes: 5c602531feb3db39 ("drm: rcar-du: Replace manual bridge implementation with DRM bridge") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: shmobile: defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARDGeert Uytterhoeven
SND_SOC_RSRC_CARD was renamed SND_SIMPLE_SCU_CARD, hence update shmobile_defconfig. Fixes: d12c6216c4a58f9f ("ASoC: rsrc-card: rename rsrc-card to simple-scu-card phase3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: shmobile: defconfig: Replace USB_XHCI_RCAR by USB_XHCI_PLATFORMGeert Uytterhoeven
USB_XHCI_RCAR is no longer enabled, as it now has a dependency on USB_XHCI_PLATFORM, instead of selecting USB_XHCI_PLATFORM. As the latter selects the former if ARCH_RENESAS, fix this by replacing USB_XHCI_RCAR by USB_XHCI_PLATFORM in shmobile_defconfig. Fixes: f879fc32aa0c96fb ("usb: host: xhci-rcar: Avoid long wait in xhci_reset()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: shmobile: defconfig: Enable missing PCIE_RCAR dependencyGeert Uytterhoeven
PCIE_RCAR is no longer enabled, as it now has a dependency on PCI_MSI_IRQ_DOMAIN instead of selecting PCI_MSI and PCI_MSI_IRQ_DOMAIN. Fix this by explicitly enabling PCIE_RCAR in shmobile_defconfig. Fixes: 3ee803641e76bea7 ("PCI/MSI: irqchip: Fix PCI_MSI dependencies") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: shmobile: defconfig: Enable Ethernet AVBBiju Das
The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel KSZ9031MNX). Gigabit Ethernet support is available in Renesas AVB driver. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-27ARM: dts: sun8i: a83t: Switch to CCU device tree binding macrosChen-Yu Tsai
Now that the CCU device tree binding headers have been merged, we can use the properly named macros in the device tree, instead of raw numbers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-07-27ARM: dts: sunxi: h3/h5: Correct emac register sizeCorentin Labbe
The datasheet said that emac register size is 0x10000 not 0x104 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Fixed commit subject prefix] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-07-27drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPUWill Deacon
Since the PMU register interface is banked per CPU, CPU PMU interrrupts cannot be handled by a CPU other than the one with the PMU asserting the interrupt. This means that migrating PMU SPIs, as we do during a CPU hotplug operation doesn't make any sense and can lead to the IRQ being disabled entirely if we route a spurious IRQ to the new affinity target. This has been observed in practice on AMD Seattle, where CPUs on the non-boot cluster appear to take a spurious PMU IRQ when coming online, which is routed to CPU0 where it cannot be handled. This patch passes IRQF_PERCPU for PMU SPIs and forcefully sets their affinity prior to requesting them, ensuring that they cannot be migrated during hotplug events. This interacts badly with the DB8500 erratum workaround that ping-pongs the interrupt affinity from the handler, so we avoid passing IRQF_PERCPU in that case by allowing the IRQ flags to be overridden in the platdata. Fixes: 3cf7ee98b848 ("drivers/perf: arm_pmu: move irq request/free into probe") Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-07-27ARM: sa1100: normalize clk APIArnd Bergmann
sa1100 provides its own variant of the clk API rather than using the generic COMMON_CLK API. This generally works, but it causes some link errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent or clk_round_rate functions when a platform lacks those interfaces. This adds trivial stub implementations for each of them, based on the behavior of the COMMON_CLK implementation: - set_rate() and set_parent() report success without doing anything - round_rate() returns the clk rate - get_parent() returns NULL. This adds the minimal bloat and should do the right thing for the simple clock hardware in this SoC. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27ARM: davinci: normalize clk APIArnd Bergmann
davinci still has its own clk implementation, but lacks a clk_get_parent() helper, which can lead to link errors in randconfig builds. This adds the usual implementation. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27ARM: sa1100/pxa: fix MTD_XIP buildArnd Bergmann
In commit 3169663ac5902 "ARM: sa11x0/pxa: convert OS timer registers to IOMEM", the definition of the OSCR macro was changed to be an __iomem pointer, but the same register is also used by the XIP code. This patch does the corresponding change here as well. On PXA, the IRQ register definitions were removed even earlier, in commit 5d284e353eb1 ("ARM: pxa: avoid accessing interrupt registers directly"). This patch unfortunately brings some of that back. An earlier version of my patch moved the code into an external function, which could not work for CONFIG_XIP_KERNEL+CONFIG_MTD_XIP, so this restores something close to the original code. Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-March/241716.html Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27ARM: davinci: don't mark vpif_input structures as 'const'Arnd Bergmann
A change to the platform data definitions caused a warning in the board code: arch/arm/mach-davinci/board-da850-evm.c:1221:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] arch/arm/mach-davinci/board-da850-evm.c:1231:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] This is a bit unfortunate, since we generally like structure definitions to be const, but as this is legacy code, the easiest way out is still to remove the 'const' annotation here. Fixes: 4a5f8ae50b66 ("[media] davinci: vpif_capture: get subdevs from DT when available") Fixes: 231ce279e6e3 ("ARM: davinci: fix const warnings") Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27ARM: dts: da850-lcdk: drop unused VPIF endpointsKevin Hilman
Drop the unused endpoints. They should only be used when there is an actual remote-endpoint connected. Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-07-27ARM: dts: da850-evm: drop unused VPIF endpointsKevin Hilman
Drop the unused endpoints. They should only be used when there is an actual remote-endpoint connected. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-07-27Merge tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Pull "mvebu fixes for 4.13 (part 1)" from Gregory CLEMENT: - Fix wrong irq type for gpio expeander on Armada 388 GP - Use __pa_symbol instead of virt_to_phys in the mv98dx3236 platform SMP code * tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: Fix irq type for pca955 ARM: mvebu: use __pa_symbol in the mv98dx3236 platform SMP code
2017-07-27ARM: dts: exynos: Add clocks to audss block to fix silent hang on Exynos4412Krzysztof Kozlowski
Add necessary parent clocks for audss (Audio SubSystem, MAUDIO) clock controller block. This allows driver to keep EPLL enabled before accessing any MAUDIO registers thus fixing silent hang. This silent hang appeared with commit 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks"), e.g. on Odroid U3 usually with last (but unrelated) messages: [ 2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci [ 2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27Merge tag 'omap-for-v4.13/fixes-merge-window' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "Few fixes for omaps for issues found recently" from Tony Lindgren: - Fix disable_irq related shared IRQ warnings for omap3 PRM - Fix omap4 legacy code regression that accidentally removed code that we still need for PRM interrupts - Fix dm8168-evm NAND pins and MMC write protect pin direction - Fix dra71-evm mdio impedance values * tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra71-evm: mdio: Fix impedance values ARM: dts: dm816x: Correct the state of the write protect pin ARM: dts: dm816x: Correct NAND support nodes ARM: OMAP4: Fix legacy code clean-up regression ARM: OMAP2+: Fix omap3 prm shared irq
2017-07-27ARM: dts: stm32: enable ADC on stm32h743i-eval boardFabrice Gasnier
There's a potentiometer connected to ADC1 and ADC2 in0 on stm32h743i-eval board. - Add fixed-voltage 'vdda' regulator that supplies 'vref' pin. It's used as voltage reference for ADC and/or DAC. - Enable ADC1 in0 input (arbitrary choice: could be ADC2 as well). Note: No pinctrl is needed to use in0 dedicated analog input pin (e.g. ADC12_INP0). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-07-27ARM: dts: stm32: add ADC support on stm32h743Fabrice Gasnier
Add support for ADC (Analog to Digital Converter) to STM32H743. It has 3 ADCs, distributed over two ADC blocks: - ADC1 and ADC2 @0x40022000 - ADC3 @0x58026000 (instantiated separately) Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-07-27ARM: dts: stm32: Add DAC support on stm32h743Fabrice Gasnier
Add support for DAC (Digital to Analog Converter) to STM32H743. STM32H743 DAC has two output channels. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-07-27ARM: dts: stm32: Add DAC support on stm32f429Fabrice Gasnier
Add support for DAC (Digital to Analog Converter) to STM32F429. STM32F429 DAC has two output channels. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Joanthan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-07-26ARM: dts: stm32: enable CEC for stm32f769 discoveryBenjamin Gaignard
enable cec for stm32f769 discovery board Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-07-26ARM: dts: stm32: add CEC for stm32f7 familyBenjamin Gaignard
add cec in devicetree for stm32f7 family Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-07-26ARM: dts: stm32: reorder stm32h743 nodesAlexandre Torgue
Reorder nodes to keep coherency with others platforms (stm32f4/stm32f7). Nodes are ordered following base address. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-07-26ARM: dts: stm32: Remove rdinit from bootargs on stm32f429-discoAlexandre TORGUE
The rootfs is independent from the board. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-07-26ARM: dts: stm32: Remove rdinit from bootargs on stm32f429i-evalAlexandre TORGUE
The rootfs is independent from the board. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-07-26ARM: dts: stm32: Remove rdinit from bootargs on stm32f469-discoAlexandre TORGUE
The rootfs is independent from the board. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-07-26ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classdCyrille Pitchen
This patch adds the pin muxing for classd and enables it. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-26ARM: dts: at91: sama5d2: add classd nodesCyrille Pitchen
This patch adds nodes for the classd device and its generated clock. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-26ARM: dts: imx6qdl-nitrogen6x: fix USB PHY resetGary Bisson
Declared as a regulator since the driver doesn't have a reset-gpios property for this. This ensures that the PHY is woken up, not depending on the state the second stage bootloader leaves the pin. This is a workaround until a proper mechanism is provided to reset such devices like the pwrseq library [1] for instance. [1] https://lkml.org/lkml/2017/2/10/779 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-26ARM: dts: imx6qdl-sabrelite: fix USB PHY resetGary Bisson
Declared as a regulator since the driver doesn't have a reset-gpios property for this. This ensures that the PHY is woken up, not depending on the state the second stage bootloader leaves the pin. This is a workaround until a proper mechanism is provided to reset such devices like the pwrseq library [1] for instance. [1] https://lkml.org/lkml/2017/2/10/779 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-25Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping fixes from Christoph Hellwig: "split the global dma coherent pool from the per-device pool. This fixes a regression in the earlier 4.13 pull requests where the global pool would override a per-device CMA pool (Vladimir Murzin)" * tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping: ARM: NOMMU: Wire-up default DMA interface dma-coherent: introduce interface for default DMA pool
2017-07-25ARM: pxa/raumfeld: mark rotary encoder properties as __initconstDmitry Torokhov
device_add_properties() performs deep copy of supplied array of properties, which means that we can discard the original array. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-12 12:44:23 +0000