summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-09-06ARM: omap2plus_defconfig: Fix missing videoAdam Ford
When the panel-dpi driver was removed, the simple-panels driver was never enabled, so anyone who used the panel-dpi driver lost video, and those who used it inconjunction with simple-panels would have to manually enable CONFIG_DRM_PANEL_SIMPLE. This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same way the deprecated panel-dpi was. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-06Merge tag 'irqchip-5.4' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for Linux 5.4 from Marc Zyngier: - Large GICv3 updates to support new PPI and SPI ranges - Conver all alloc_fwnode() users to use PAs instead of VAs - Add support for Marvell's MMP3 irqchip - Add support for Amlogic Meson SM1 - Various cleanups and fixes
2019-09-05bus: ti-sysc: Fix handling of invalid clocksTony Lindgren
We can currently get "Unable to handle kernel paging request at virtual address" for invalid clocks with dts node but no driver: (__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34) (ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc) (ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8) (sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8) Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating clk_get() with -ENOENT as a proper error. If the clock name is specified in device tree we must succeed with clk_get() to continue. For modules with no clock names specified in device tree we will just ignore the clocks. Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05Merge tag 'v5.4-rockchip-dts32-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Removal of the rk3288-fennec board which never made it to any market. * tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: arm: rockchip: remove reference to fennec board ARM: dts: rockchip: remove rk3288 fennec board support Link: https://lore.kernel.org/r/1718334.9BoTfW0Ujv@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-05Merge tag 'aspeed-5.4-devicetree-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.4, second round - Alternate flash support for Vesnin - Minor cleanups and fixes * tag 'aspeed-5.4-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit ARM; dts: aspeed: mihawk: File should not be executable ARM: dts: aspeed: swift: Change power supplies to version 2 ARM: dts: aspeed: vesnin: Add secondary SPI flash chip ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option ARM: dts: aspeed-g4: Add all flash chips Link: https://lore.kernel.org/r/CACPK8Xdp4gVuetmiu2bRTTH6oHhRrC7FELHWKVB2ZGSbPbH7HQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-05Merge tag 'v5.3-rc7' into develLinus Walleij
Linux 5.3-rc7
2019-09-05crypto: arm - Rename functions to avoid conflict with crypto/sha256.hHans de Goede
Rename static / file-local functions so that they do not conflict with the functions declared in crypto/sha256.h. This is a preparation patch for folding crypto/sha256.h into crypto/sha.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-04ARM: dts: aspeed-g5: Fixe gpio-ranges upper limitOscar A Perez
According to the AST2500/AST2520 specs, these SoCs support up to 228 GPIO pins. However, 'gpio-ranges' value in 'aspeed-g5.dtsi' file is currently setting the upper limit to 220 which isn't allowing access to all their GPIOs. The correct upper limit value is 232 (actual number is 228 plus a 4-GPIO hole in GPIOAB). Without this patch, GPIOs AC5 and AC6 do not work correctly on a AST2500 BMC running Linux Kernel v4.19 Fixes: 2039f90d136c ("ARM: dts: aspeed-g5: Add gpio controller to devicetree") Signed-off-by: Oscar A Perez <linux@neuralgames.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-04ARM; dts: aspeed: mihawk: File should not be executableJoel Stanley
Remove the executable bit. Fixes: 0a1dcf954ece ("ARM: dts: aspeed: Add Mihawk BMC platform") Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-04ARM: dts: aspeed: swift: Change power supplies to version 2Eddie James
Swift power supplies are version 2 of the IBM CFFPS. Fixes: 8e8fd0cbd7c5 ("ARM: dts: aspeed: Add Swift BMC machine") Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-04ARM: dts: aspeed: vesnin: Add secondary SPI flash chipIvan Mikhaylov
Adds secondary SPI flash chip into dts for vesnin. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-04ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot optionIvan Mikhaylov
Adds wdt2 section with 'alt-boot' option into dts for vesnin. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-04ARM: dts: aspeed-g4: Add all flash chipsJoel Stanley
The FMC supports five chip selects, so describe the five possible flash chips. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-09-04Merge tag 'samsung-soc-5.4-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.4 1. Minor fixup in plat and mach code (S3C platforms), 2. Enable exynos-chipid driver to provide SoC related information, 3. Extend the patterns for Samsung maintainer entries to cover all important files. * tag 'samsung-soc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: exynos: Enable exynos-chipid driver ARM: samsung: Include GPIO driver header Link: https://lore.kernel.org/r/20190904175002.10487-5-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'samsung-dt-5.4-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.4, part 2 1. Fix Exynos542x Chromebooks boot with multi_v7 defconfig, 2. Add GPU (Mali) support to Exynos5250 boards, 3. Minor cleanup for Exynos3250 ADC. * tag 'samsung-dt-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250 ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks ARM: dts: exynos: Remove not accurate secondary ADC compatible Link: https://lore.kernel.org/r/20190904175002.10487-4-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'samsung-defconfig-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig Samsung defconfig changes for v5.4 1. Enable AHCI platform driver on exynos defconfig for Exynos5250-based Arndale board, 2. Make Max77802 PMIC regulator driver a built-in on multi_v7 defconfig as it is essential early during boot. * tag 'samsung-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-in ARM: exynos_defconfig: Enable AHCI-platform SATA driver Link: https://lore.kernel.org/r/20190904175002.10487-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04ARM: dts: exynos: Enable GPU/Mali T604 on Arndale boardGuillaume Gardet
Tested with kmscube and some glmark2* tests on arndale board. Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-04ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook SnowGuillaume Gardet
Tested with kmscube and some glmark2* tests on Chromebook snow. Frequency adapts with load. Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-04ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250Guillaume Gardet
Add nodes for GPU (Mali T604) to Exynos5250. Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-04ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale boardGuillaume Gardet
Required to have GPU voltage scaling working properly. Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-09-04Merge tag 'omap-for-v5.4/ti-sysc-sgx-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late SoC glue layer changes for SGX on omap variants for v5.4 For a while we've had omap4 sgx glue layer defined in dts and probed with ti-sysc driver. This allows idling the sgx module for PM, and removes the need for custom platform glue layer code for any further driver changes. We first drop the unused legacy platform data for omap4 sgx. Then for omap5, we need add the missing clkctrl clock data so we can configure sgx. And we configure sgx for omap34xx, omap36xx and am3517. For am335x, we still have a dependency for rstctrl reset driver changes, so that will be added later on. Note that this branch is based on earlier ti-sysc branch for omap36xx glue layer quirk handling. * tag 'omap-for-v5.4/ti-sysc-sgx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: ARM: dts: Configure interconnect target module for am3517sgx ARM: dts: Configure interconnect target module for omap3 sgx ARM: dts: Configure sgx for omap5 clk: ti: add clkctrl data omap5 sgx ARM: OMAP2+: Drop legacy platform data for omap4 gpu Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'omap-for-v5.4/ti-sysc-drop-pdata-take2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late Drop legacy platform data omap variants for v5.4 We can now drop more platform data in favor of dts data for most devices like cpsw, gpio, i2c, mmc, uart and watchdog. In general we can do this by dropping legacy "ti,hwmods" custom dts property, and the platform data assuming the related dts data is correct. This is best done as single patch as otherwise we'd have to revert two patches in case of any unexpected issues, and we're just removing data. Fro cpsw, before we can do this, we need to configure the cpsw mdio clocks properly in dts though in the first patch. For omap4 i2c, we've already dropped the platform data earlier, but have been still allocting it dynamically based on the dts data based on the "ti,hwmods" property, but that is no longer needed. For d2d, we are missing the dts data, so we first add it and then drop the platform data. For dra7, we drop platform data and "ti,hwmods" for mcasp and mcspi. We've already dropped platform data earlier for gpio, i2c, mmc, and uart so we just need to drop "ti,hwmods" property for those. Note that this branch is based on earlier ti-sysc-fixes branch. * tag 'omap-for-v5.4/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Drop legacy custom hwmods property for dra7 gpio ARM: dts: Drop legacy custom hwmods property for dra7 mmc ARM: dts: Drop legacy custom hwmods property for dra7 i2c ARM: dts: Drop legacy custom hwmods property for dra7 uart ARM: OMAP2+: Drop legacy platform data for dra7 mcasp ARM: OMAP2+: Drop legacy platform data for dra7 mcspi ARM: OMAP2+: Drop legacy platform data for omap4 d2d ARM: dts: Configure d2d dts data for omap4 ARM: OMAP2+: Drop legacy watchdog platform data for omap4 ARM: dts: Drop custom hwmod property for omap4 i2c ARM: OMAP2+: Drop legacy platform data for cpsw on dra7 ARM: OMAP2+: Drop legacy platform data for cpsw on am3 and am4 ARM: dts: Add fck for cpsw mdio for omap variants Link: https://lore.kernel.org/r/pull-1567016893-318461@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'arm-soc/for-5.4/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree updates for 5.4, please pull the following: - Stefan does a bunch of preparatory work for supporting the Raspberry Pi 4in the next merge window correct register ranges (SPI, I2C, UART), define memory, HDMI and MMC properties at the board level * tag 'arm-soc/for-5.4/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Enable HDMI at board level ARM: dts: bcm283x: Define memory at board level ARM: dts: bcm283x: Define MMC interfaces at board level ARM: bcm283x: Reduce register ranges for UART, SPI and I2C
2019-09-04Merge tag 'qcom-defconfig-for-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM Based defconfig Updates for v5.4 * Add DRM_MSM to ARCH_QCOM defconfigs * tag 'qcom-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
2019-09-04Merge tag 'davinci-for-v5.4/dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt Contains a patch to switch to more generic compatible for SPI NOR. This helps SPI NOR to work on newer board variants. * tag 'davinci-for-v5.4/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-evm: Use generic jedec, spi-nor for flash Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'davinci-for-v5.4/fbdev' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/drivers This converts the da8xx fbdev driver to use GPIO backlight device and regulator devices. This will finally help get rid of legacy GPIO API calls and simplify DaVinci GPIO driver. * tag 'davinci-for-v5.4/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() fbdev: da8xx: remove panel_power_ctrl() callback from platform data ARM: davinci: da850-evm: switch to using a fixed regulator for lcdc fbdev: da8xx: add support for a regulator ARM: davinci: da850-evm: model the backlight GPIO as an actual device Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)Masahiro Yamada
Kbuild provides per-file compiler flag addition/removal: CFLAGS_<basetarget>.o CFLAGS_REMOVE_<basetarget>.o AFLAGS_<basetarget>.o AFLAGS_REMOVE_<basetarget>.o CPPFLAGS_<basetarget>.lds HOSTCFLAGS_<basetarget>.o HOSTCXXFLAGS_<basetarget>.o The <basetarget> is the filename of the target with its directory and suffix stripped. This syntax comes into a trouble when two files with the same basename appear in one Makefile, for example: obj-y += foo.o obj-y += dir/foo.o CFLAGS_foo.o := <some-flags> Here, the <some-flags> applies to both foo.o and dir/foo.o The real world problem is: scripts/kconfig/util.c scripts/kconfig/lxdialog/util.c Both files are compiled into scripts/kconfig/mconf, but only the latter should be given with the ncurses flags. It is more sensible to use the relative path to the Makefile, like this: obj-y += foo.o CFLAGS_foo.o := <some-flags> obj-y += dir/foo.o CFLAGS_dir/foo.o := <other-flags> At first, I attempted to replace $(basetarget) with $*. The $* variable is replaced with the stem ('%') part in a pattern rule. This works with most of cases, but does not for explicit rules. For example, arch/ia64/lib/Makefile reuses rule_as_o_S in its own explicit rules, so $* will be empty, resulting in ignoring the per-file AFLAGS. I introduced a new variable, target-stem, which can be used also from explicit rules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marc Zyngier <maz@kernel.org>
2019-09-04Merge tag 'davinci-for-v5.4/soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc This converts all DaVinci SoCs except DM365 to use new clocksource driver. DM365 conversion is still under debug and will be part of a future pull request. * tag 'davinci-for-v5.4/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: davinci: dm355: switch to using the clocksource driver ARM: davinci: move timer definitions to davinci.h ARM: davinci: da830: switch to using the clocksource driver ARM: davinci: da850: switch to using the clocksource driver ARM: davinci: WARN_ON() if clk_get() fails ARM: davinci: enable the clocksource driver for DT mode Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'arm-soc/for-5.4/defconfig' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/defconfig This pull request contains Broadcom ARM-based SoCs defconfig updates for 5.4, please pull the following: - Nicolas enables the Raspberry Pi CPUFREQ driver in both bcm2835_defconfig and multi_v7_defconfig * tag 'arm-soc/for-5.4/defconfig' of https://github.com/Broadcom/stblinux: ARM: defconfig: enable cpufreq driver for RPi
2019-09-04arm: remove wrappers for the generic dma remap helpersChristoph Hellwig
Remove a few tiny wrappers around the generic dma remap code. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: introduce a dma_common_find_pages helperChristoph Hellwig
A helper to find the backing page array based on a virtual address. This also ensures we do the same vm_flags check everywhere instead of slightly different or missing ones in a few places. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: always use VM_DMA_COHERENT for generic DMA remapChristoph Hellwig
Currently the generic dma remap allocator gets a vm_flags passed by the caller that is a little confusing. We just introduced a generic vmalloc-level flag to identify the dma coherent allocations, so use that everywhere and remove the now pointless argument. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04vmalloc: lift the arm flag for coherent mappings to common codeChristoph Hellwig
The arm architecture had a VM_ARM_DMA_CONSISTENT flag to mark DMA coherent remapping for a while. Lift this flag to common code so that we can use it generically. We also check it in the only place VM_USERMAP is directly check so that we can entirely replace that flag as well (although I'm not even sure why we'd want to allow remapping DMA appings, but I'd rather not change behavior). Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: provide a better default ->get_required_maskChristoph Hellwig
Most dma_map_ops instances are IOMMUs that work perfectly fine in 32-bits of IOVA space, and the generic direct mapping code already provides its own routines that is intelligent based on the amount of memory actually present. Wire up the dma-direct routine for the ARM direct mapping code as well, and otherwise default to the constant 32-bit mask. This way we only need to override it for the occasional odd IOMMU that requires 64-bit IOVA support, or IOMMU drivers that are more efficient if they can fall back to the direct mapping. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04arm-nommu: call dma_mmap_from_dev_coherent directlyChristoph Hellwig
There is no need to go through dma_common_mmap for the arm-nommu dma mmap implementation as the only possible memory not handled above could be that from the per-device coherent pool. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-04dma-mapping: move the dma_get_sgtable API comments from arm to common codeChristoph Hellwig
The comments are spot on and should be near the central API, not just near a single implementation. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-03Merge tag 'renesas-arm-soc-for-v5.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc Renesas ARM SoC updates for v5.4 - Low-level debugging support for RZ/A2M. * tag 'renesas-arm-soc-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: debug-ll: Add support for r7s9210 Link: https://lore.kernel.org/r/20190823123643.18799-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'zynq-soc-for-v5.4' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
arm/soc ARM: Xilinx Zynq SoC patches for v5.4 - Add support for SMP in thumb mode - Fix SMP trampoline code when FORTIFY_SOURCE is enabled * tag 'zynq-soc-for-v5.4' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: Use memcpy_toio instead of memcpy on smp bring-up ARM: zynq: Support smp in thumb mode Link: https://lore.kernel.org/r/8e00ba70-9403-4bf7-2870-a94758e37346@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03ARM: scoop: Use the right includeLinus Walleij
This is a GPIO driver so it should include <linux/gpio/driver.h> not <linux/gpio.h> Link: https://lore.kernel.org/r/20190820103429.7028-1-linus.walleij@linaro.org Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'imx-defconfig-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.4: - Enable pinctrl and clock driver support for i.MX8MN SoC. - Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support SDMA firmware loading via udev. - Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver. - Enable module build of OV5645 camera driver in imx_v6_v7_defconfig. * tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: CONFIG_DRM_ETNAVIV=m ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver arm64: defconfig: Build imx8 ddr pmu as module arm64: defconfig: Select CONFIG_CLK_IMX8MN by default arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default arm64: defconfig: Enable SDMA on i.mx8mq/8mm Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'aspeed-5.4-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig ASPEED defconfig updates for 5.4 - Enable the new AST2600 in multi_v7 and the aspeed_g5 configs. - Regenerate defconfigs to drop old options - Clean up network options * tag 'aspeed-5.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: configs: aspeed_g5: Enable AST2600 ARM: configs: multi_v7: Add ASPEED G6 ARM: configs: aspeed: Refresh defconfigs ARM: configs: aspeed: Enable commonly used network functionality Link: https://lore.kernel.org/r/CACPK8XdyWzghA0QPDzA_MK5FYwhT5afqDJHNdhc8mfD2uk8MfQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'ux500-dts-v5.4-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt More Ux500 device tree updates for the v5.4 kernel: - Drop TV-OUT muxgroup from the HREF pin control - Fix up BU21013 touchpad from Dmitry - Split of AB8500 config in its own DTSI - Drop the unused USB regulator config - Add proper thermal zone for the CPU * tag 'ux500-dts-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500: Update thermal zone ARM: dts: ux500: Remove ab8500_ldo_usb regulator from device tree ARM: dts: ux500: Move ab8500 nodes to ste-ab8500.dtsi ARM: ux500: improve BU21013 touchpad bindings ARM: dts: ux500: Drop TV-out muxgroup on HREFs Link: https://lore.kernel.org/r/CACRpkdZ9Xvx+rg-hFVgG61_i2CdQSs+nZq5FXkkK2-3Ce9ooWg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'mvebu-dt-5.4-1' of git://git.infradead.org/linux-mvebu into arm/dtArnd Bergmann
mvebu dt for 5.4 (part 1) - Disable the kirkwood RTC that doesn't work on the ts219 board * tag 'mvebu-dt-5.4-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: ts219: disable the SoC's RTC Link: https://lore.kernel.org/r/878srdzjpj.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'at91-5.4-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.4 - style cleanup for at91sam9x5 based boards - avoid colliding node and property names * tag 'at91-5.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: at91sam9x5dm.dtsi: Style cleanup ARM: dts: at91: at91sam9x5_lcd.dtsi: Style cleanup ARM: dts: at91: at91sam9xx5ek: Style cleanup ARM: dts: at91: at91sam9g15: Style cleanup ARM: dts: at91: kizboxmini: Style cleanup ARM: dts: at91: cosino: Style cleanup ARM: dts: at91: ariettag25: style cleanup ARM: dts: at91: ariag25: Style cleanup ARM: dts: at91: Add label for sam9x5's internal RTC dt-bindings: add vendor prefix "acme" for "Acme Systems srl" ARM: dts: at91: Avoid colliding 'display' node and property names Link: https://lore.kernel.org/r/20190825202642.GA18853@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'imx-dt-5.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm32 device tree changes for 5.4: - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and PHYTEC phyBOARD-Segin based on i.MX6ULL. - A series from Andrey Smirnov to update vf610-zii boards on I2C pinmux, switch watchdog, GPIO expander IRQ. - Move GIC node into soc node for i.MX6 SoCs. - Add OV5645 camera support for imx6qdl-wandboard board. - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri. - Use simple-mfd instead of simple-bus for i.MX6 ANATOP. - Move the native-mode property inside the display-timings node for various i.MX25 and i.MX27 boards. - Add EDMA devices for i.MX7ULP SoC. - A series from Stefan Riedmueller to update imx6ul-phytec-segin board on various devices. - Use OF graph to describe the display for opos6uldev board. - Misc random updates on i.MX7/6 boards. * tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz ARM: dts: pbab01: correct rtc vendor ARM: vf610-zii-cfu1: Add node for switch watchdog ARM: dts: imx6: drop gpmi-nand address and size cells ARM: dts: imx6: replace simple-bus by simple-mfd for anatop ARM: dts: imx6qdl-colibri: add phy to fec ARM: dts: imx7-colibri: add recovery for I2C for iMX7 ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet ARM: dts: imx7-colibri: prepare module device tree for FlexCAN ARM: dts: imx7-colibri: disable HS400 ARM: dts: imx7-colibri: make sure module supplies are always on ARM: dts: imx7d: cl-som-imx7: add compatible for phy ARM: dts: imx7d: cl-som-imx7: make ethernet work again ARM: dts: imx6ul: Add csi node ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings ARM: dts: apf27dev: native-mode is part of display-timings ARM: dts: edb7211: native-mode is part of display-timings ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings ... Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'aspeed-5.4-devicetree' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.4 New machines: - Facebook Wedge100, Wedge40 and Minipack - Lenovo Hr855xg2 - Wistron Mihawk There's a few other updates, notably some changes to to use the newly added SDHCI driver. * tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: swift: Add eMMC device ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB ARM: dts: aspeed: Describe SD controllers ARM: dts: aspeed: Add Mihawk BMC platform ARM: dts: aspeed: fp5280g2: Fix power supply address ARM: dts: aspeed: tiogapass: Add Riser card ARM: dts: aspeed: tiogapass: Move battery sensor ARM: dts: aspeed: Add Facebook Wedge100 BMC ARM: dts: aspeed: Add Facebook Wedge40 BMC ARM: dts: aspeed: swift: Fix FSI GPIOs ARM: dts: aspeed: Add SGPM pinmux ARM: dts: aspeed: tiogapass: Add VR devices ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC ARM: dts: aspeed: Add Facebook Minipack BMC Link: https://lore.kernel.org/r/CACPK8XfKHpNYXNE_VRaLeGUQa7-hkmUS0nsPfaeSLE4sckKFHg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'omap-for-v5.4/dt-take2-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts changes for omap variants for v5.4 Remove regulator-boot-off properties that we never had in the mainline kernel so they won't do anything. We add stdout-path for gta04, and make am335x-boneblue use am335x-osd335x-common.dtsi file. * tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi ARM: dts: gta04: define chosen/stdout-path ARM: dts: omap3-n950-n9: Remove regulator-boot-off property ARM: dts: am335x-cm-t335: Remove regulator-boot-off property Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'v5.3-next-dts32' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt add support for the mt7629 reference board * tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mediatek: add basic support for MT7629 SoC Link: https://lore.kernel.org/r/e236f659-2851-21b8-1873-314cd72ed6be@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'sunxi-dt-for-5.4-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.4 Our usual pile of patches for the next release, which include mostly: - More fixes thanks to the DT validation using the YAML bindings - IR receiver support on the H6 - SPDIF support on the H6 - I2C Support on the H6 - CSI support on the A20 - RTC support on the H6 - New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC * tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits) arm64: dts: allwinner: orange-pi-3: Enable WiFi ARM: dts: sunxi: Add missing watchdog clocks ARM: dts: sunxi: Add missing watchdog interrupts arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree ARM: dts: sun7i: Add CSI0 controller arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC) dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC ARM: dts: v3s: Change the timers compatible ARM: dts: h3: Change the timers compatible ARM: dts: a83t: Change the timers compatible ARM: dts: a23/a33: Change the timers compatible ARM: dts: sun6i: Add missing timers interrupts ARM: dts: sun5i: Add missing timers interrupts ARM: dts: sun4i: Add missing timers interrupts dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema arm64: dts: allwinner: h6: Introduce Tanix TX6 board dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board arm64: allwinner: h6: add I2C nodes dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node. ARM: dts: sunxi: Add mdio bus sub-node to GMAC ... Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'renesas-arm-dt-for-v5.4-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.4 - Fix HSCIF PM Domain on R-Car H1, - PMU support for RZ/G1C. * tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: r8a77470: Add PMU device node ARM: dts: r8a7779: Use SYSC "always-on" PM Domain for HSCIF Link: https://lore.kernel.org/r/20190823123643.18799-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-24 00:55:34 +0000