summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-10-04ARM: EXYNOS4: Configure MAX8997 PMIC for ORIGENInderpal Singh
Configure MAX8997 PMIC and provide platform specific data for ORIGEN board. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: OMAP: irq: loop counter fix in omap_init_irq()Tapani Utriainen
Fixes bug where variable i was redundantly used for counting two nested loops. Signed-off-by: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-03ARM: OMAP4: Keyboard: Fix section mismatch in the board fileBjarne Steinsbo
`keypad_pads' is referred to by `keypad_data' which is not __initdata, so `keypad_pads' should not be __initdata either. Signed-off-by: Bjarne Steinsbo <bsteinsbo@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-03clocksource: fixup ux500 build problemsLinus Walleij
Based on a patch from Arnd Bergmann this fixes up the build problem of assigning a non-existing global when the ux500 PRCMU timer is not linked in by passing its base address to the init function. We also add a missing <linux/errno.h> inclusion and staticize the dummy function. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-03ARM: EXYNOS4: Add HDMI support for ORIGENSachin Kamat
This patch adds HDMI (TVout) support for ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add keypad support for ORIGENSachin Kamat
This patch adds keypad support for ORIGEN board as GPIO keys. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add support for secondary MMC port on ORIGENTushar Behera
Secondary MMC port on ORIGEN is connected to sdhci instance 0. Support for secondary MMC port is extended by registering sdhci instance 0. Since sdhci instance 2 can contain a bootable media, sdhci instance 0 is registered after instance 2. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [kgene.kim@samsung.com: Added comments in registering sdhci] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Fix sdhci card detection for ORIGENTushar Behera
Fix incorrect value of cd_type field in platform data for sdhci device. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add PWM backlight support on ORIGENGiridhar Maruthy
This patch adds support for LCD backlight using PWM timer on ORIGEN board. Signed-off-by: Giridhar Maruthy <giridhar.maruthy@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add FIMC device on ORIGEN boardSachin Kamat
This patch adds definitions to enable support for s5p-fimc driver on ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: re-ordering changes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03ARM: EXYNOS4: Add USB EHCI device to ORIGEN boardSachin Kamat
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [kgene.kim@samsung.com: re-ordering changes in Kconfig] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-03Merge branch 'next-samsung-board-v3.1' into next/topic-exynos4-devel-origenKukjin Kim
2011-10-02ARM: include linux/highmem.h in uaccess functionsArnd Bergmann
When highpte support is enabled, this is required to build the kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: 7104/1: plat-pxa: break out GPIO driver specificsLinus Walleij
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystemLinus Walleij
As per example from the other ARM boards, push the PXA GPIO driver down to the GPIO subsystem so it can be consolidated. Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01ARM: 7042/3: mach-ep93xx: break out GPIO driver specificsLinus Walleij
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Ryan Mallon <rmallon@gmail.com> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01ARM: common/vic: use proper __iomem annotationsArnd Bergmann
In vic_init, we pass addr into readl, so it needs to be a pointer, not a u32 address. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: OC_ETM should not select ARM_AMBAArnd Bergmann
The CONFIG_ARM_AMBA symbol is selected by the platforms that support AMBA, and the other platforms (e.g. orion) might not be able to build that code at all when they do not support the clk API. Instead, make sure that OC_ETM is only built on platforms that do support the amba subsystem already. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: pci: always export pcibios_bus_to_resourceArnd Bergmann
Some PCI drivers call pcibios_bus_to_resource directly, but it is only exported when CONFIG_HOTPLUG is set, because it was initially mean for pccard support. Moving the export out of the #ifdef lets us avoid these build errors: ERROR: "pcibios_bus_to_resource" [drivers/video/vt8623fb.ko] undefined! ERROR: "pcibios_bus_to_resource" [drivers/video/arkfb.ko] undefined! ERROR: "pcibios_bus_to_resource" [drivers/video/s3fb.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: add io{read,write}{16,32}be functionsArnd Bergmann
These functions are used in some PCI drivers with big-endian MMIO space, and they are trivial to add here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: limit CONFIG_HAVE_IDE to platforms that doArnd Bergmann
Support for IDE drivers should not be automatic, since most platforms cannot actually support any IDE low-level drivers. This partly reverts 2064c946e "ARM: always select HAVE_IDE" to set this symbol only when either a PC-style bus (PCI, ISA, PCMCIA) is enabled or a platform is used that is known to have an existing driver in drivers/ide. New platforms should not need this option and just use CONFIG_ATA with drivers/ata/. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: pm: let platforms select cpu_suspend supportArnd Bergmann
Support for the cpu_suspend functions is only built-in when CONFIG_PM_SLEEP is enabled, but omap3/4, exynos4 and pxa always call cpu_suspend when CONFIG_PM is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: vfp: use -mfloat-abi=soft to build vfpArnd Bergmann
Distros are starting to ship with toolchains defaulting to hardfloat. Using such a compiler to build the kernel fails in the VFP directory with arch/arm/vfp/entry.S:1:0: sorry, unimplemented: -mfloat-abi=hard and VFP Adding -mfloat-abi=soft to the gcc command line fixes this. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: allow building alignment.c without PROC_FSArnd Bergmann
The two functions cpu_is_v6_unaligned and safe_usermode are only defined when CONFIG_PROC_FS is enabled, but are used outside of the #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Dave Martin <dave.martin@linaro.org>
2011-10-01ARM: always use ARM_UNWIND for thumb2 kernelsArnd Bergmann
Thumb2 kernels cannot be built with frame pointers, but can use the ARM_UNWIND feature for unwinding instead. This makes sure that all features that rely on unwinding includeing CONFIG_LATENCYTOP and FAULT_INJECTION_STACKTRACE_FILTER do not enable frame pointers when the unwinder is already selected, and we always build with the unwinder when we want a thumb2 kernel, to make sure we do not get the frame pointers instead. A different option would be to redefine the CONFIG_FRAME_POINTERS option on ARM to mean builing with either frame pointers or the unwinder, and then select which one to use based on the CPU architecture or another user option. That would still allow building thumb2 kernels without the unwinder but would also be more confusing. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: SMP depends on MMUArnd Bergmann
The SMP implementation on ARM heavily depends on MMU-only code. As long as nobody is interested in fixing this, let's disable the SMP option when building for nommu. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: export rtc_lock for nvram driverArnd Bergmann
The rtc_lock is used by both the nvram and rtc drivers, so we need to export it if at least one of the two is built, not just for the rtc driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: 7113/1: mm: Align bank start to MAX_ORDER_NR_PAGESLinus Walleij
The VM subsystem assumes that there are valid memmap entries from the bank start aligned to MAX_ORDER_NR_PAGES. On the Ux500 we have a lot of mem=N arguments on the commandline triggering this bug several times over and causing kernel oops messages. Cc: stable@kernel.org Cc: Michael Bohan <mbohan@codeaurora.org> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Johan Palsson <johan.palsson@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01ARM: omap: use __devexit_p in dmtimer driverArnd Bergmann
The omap_dm_timer_remove function gets discarded when CONFIG_HOTPLUG is not set, so we must not reference it unconditionally. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-01ARM: CSR: clock: Fix indentationBarry Song
Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-10-01ARM: CSR: prima2: fix trailing whitespaceBarry Song
Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-10-01ARM: CSR: timer: space required before the open parenthesis '('Barry Song
Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-10-01ARM: CSR: timer: do not initialise statics to 0 or NULLBarry Song
Signed-off-by: Barry Song <Baohua.Song@csr.com>
2011-09-30Merge branch 'omap/cleanup' into next/cleanupArnd Bergmann
2011-09-30Merge branch 'ixp/board' into next/boardArnd Bergmann
2011-09-30ixp4xx: support omicron ixp425 based boardsRichard Cochran
This patch adds board support for the DEVIXP, the MICCPT, and the MIC256, which are three IXP425 based boards produced by OMICRON electronics, GmbH. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-30Merge branch 'for_3.2/voltage-cleanup' of ↵Arnd Bergmann
git://gitorious.org/khilman/linux-omap-pm into omap/voltage
2011-09-30ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_initAxel Lin
Current code calls omap4430_phy_init() twice in usb_musb_init(). Calling omap4430_phy_init() once is enough. This patch removes the first omap4430_phy_init() call, which using an uninitialized pointer as parameter. This patch elimates below build warning: arch/arm/mach-omap2/usb-musb.c: In function 'usb_musb_init': arch/arm/mach-omap2/usb-musb.c:141: warning: 'dev' may be used uninitialized in this function Signed-off-by: Axel Lin <axel.lin@gmail.com> Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30ARM: OMAP: Fix i2c init for twl4030Tony Lindgren
Looks like 2600 kHz rate does not work reliably on 2430, so just use the 100 kHz rate. Otherwise the system often fails to boot properly with: omap_i2c omap_i2c.2: timeout waiting for bus ready omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages twl: clock init err [-110] omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages TWL4030 Unable to unlock IDCODE registers --110 Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1Bryan Buckley
Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley <bryan.buckley@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Tested-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-30OMAP: Apollon: Port the display driver to new DSS2Tomi Valkeinen
Port the old omapfb panel driver to DSS2. This patch changes the board file only, the driver is ported in separate patch. Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: H4: Port the display driver to new DSS2Tomi Valkeinen
Port the old omapfb panel driver to DSS2. This patch changes the board file only, the driver is ported in separate patch. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: LDP: Port the display driver to new DSS2Tomi Valkeinen
Port the old omapfb panel driver to DSS2. This patch changes the board file only, the driver is ported in separate patch. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stanley Miao <stanley.miao@windriver.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: 2420SDP: Port the display driver to new DSS2Tomi Valkeinen
Port the old omapfb panel driver to DSS2. This patch changes the board file only, the driver is ported in separate patch. Cc: Hunyue Yau <hyau@mvista.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: omap3touchbook: Remove unused lcd stuffTomi Valkeinen
board-omap3touchbook.c adds an LCD device, but the kernel doesn't contain a driver for the device. So let's remove the unneeded LCD device. Cc: Gregoire Gentil <gregoire@gentil.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: RX51: Remove unused old omapfb stuffTomi Valkeinen
RX51 uses the new DSS2 display driver, but the board file still contained some code for the old omapfb driver. The old code can be removed. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP4: 4430SDP: Add picodlp support to board fileTomi Valkeinen
An on-board projector named picodlp is available for OMAP4430 SDP. Entry for this picodlp as a panel is being added in dss_devices array to the board file. It needs 4 GPIO pins for interfacing with host processor and these are defined and two of them are configured in board file. Two GPIOs power_on and display_select are configured here. picodlp also needs an i2c client over i2c controller-2 at address 0x1b. Signed-off-by: Mayuresh Janorkar <mayur@ti.com> Signed-off-by: Mythri P K <mythripk@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP4: 4430SDP: Add panel support to board fileTomi Valkeinen
4430SDP has two Taal DSI panels, connected to DSI 1 and DSI 2 modules. The panels use a common PWM backlight, which will be implemented later when the PWM driver has been improved to support the backlight. Until the PWM driver has been improved, the following hack added to arch/arm/mach-omap2/board-4430sdp.c can be used to set the backlight to max: static int omap_4430sdp_hack_backlight(void) { twl_i2c_write_u8(TWL_MODULE_PWM, 0x7f, LED_PWM2OFF); twl_i2c_write_u8(TWL_MODULE_PWM, 0x7f, LED_PWM2ON); twl_i2c_write_u8(TWL6030_MODULE_ID1, 0x30, TWL6030_TOGGLE3); return 0; } late_initcall(omap_4430sdp_hack_backlight); Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: 4430SDP: Remove unneeded lcd configTomi Valkeinen
4430SDP board file contains some unused old LCD configurations. They are not used and can be removed. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: Add DDC i2c_bus_num to board filesTomi Valkeinen
Add i2c bus number for DVI output for boards with DVI output where the i2c bus has been confirmed to be connected and working. The driver uses this to detect if a panel is connected and to read EDID. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit (git 2.34.1) at 2025-09-21 00:51:03 +0000