| Age | Commit message (Collapse) | Author |
|---|
|
htmdump_init calls is_kvm_guest() to check for guest environment.
is_kvm_guest() is defined in kvm_guest.h header file. Without including
the header file, build hits error failing to find the function.
arch/powerpc/platforms/pseries/htmdump.c: In function 'htmdump_init':
arch/powerpc/platforms/pseries/htmdump.c:469:6: error: implicit declaration of function 'is_kvm_guest';
did you mean '__key_get'? [-Werror=implicit-function-declaration]
if (is_kvm_guest()) {
^~~~~~~~~~~~
__key_get
This is observed in configs where CONFIG_KVM_GUEST is disabled.
Include header file explicitly to avoid the build error
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505061324.elUl4njU-lkp@intel.com/
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250506135232.69014-1-atrajeev@linux.ibm.com
|
|
Support dumping HTM capabilities information from Hardware
Trace Macro (HTM) function via debugfs interface. Under
debugfs folder "/sys/kernel/debug/powerpc/htmdump", add
file "htmcaps".
The interface allows only read of this file which will present the
content of HTM buffer from the hcall.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-9-atrajeev@linux.ibm.com
|
|
Under debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file
"htmflags". Currently supported flag value is to enable/disable
HTM buffer wrap. wrap is used along with "configure" to prevent
HTM buffer from wrapping. Writing 1 will set noWrap while
configuring HTM
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-8-atrajeev@linux.ibm.com
|
|
Add htm setup support to htmdump module. To use the
HTM (Hardware Trace Macro), HTM buffer has to be allocated.
Support setup of HTM buffers via debugfs interface. Under
debugfs folder, "/sys/kernel/debug/powerpc/htmdump", add file
"htmsetup". The interface allows setup of HTM buffer by writing
size of HTM buffer in power of 2 to the "htmsetup" file
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-7-atrajeev@linux.ibm.com
|
|
Support dumping system processor configuration from Hardware
Trace Macro (HTM) function via debugfs interface. Under
debugfs folder "/sys/kernel/debug/powerpc/htmdump", add
file "htminfo".
The interface allows only read of this file which will present the
content of HTM buffer from the hcall. The 16th offset of HTM
buffer has value for the number of entries for array of processors.
Use this information to copy data to the debugfs file
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-6-atrajeev@linux.ibm.com
|
|
Support dumping status of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmstatus".
The interface allows only read of this file which will present the
content of HTM status buffer from the hcall. The 16th offset of HTM
status buffer has value for the number of HTM entries in the status
buffer. Each nest htm status entry is 0x6 bytes, where as core HTM
status entry is 0x8 bytes. Calculate the number of bytes to read
based on this detail.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-5-atrajeev@linux.ibm.com
|
|
Support starting of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmstart".
The interface allows starting of htm via this file by
writing value "1". Also allows stopping of htm tracing by
writing value "0" to this file. Any other value returns
-EINVAL.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-4-atrajeev@linux.ibm.com
|
|
Support configuring of Hardware Trace Macro (HTM) function
via debugfs interface. Under debugfs folder
"/sys/kernel/debug/powerpc/htmdump", add file "htmconfigure".
The interface allows configuring of htm via this file
by writing value "1". Allow deconfiguring of htm via this file
by writing value "0". Any other value returns -EINVAL.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-3-atrajeev@linux.ibm.com
|
|
H_HTM (Hardware Trace Macro) hypervisor call is an HCALL to export data
from Hardware Trace Macro (HTM) function. The debugfs interface to
export the HTM function data in an lpar currently supports only dumping
of HTM data in an lpar. To add support for setup, configuration and
control of HTM function via debugfs interface, update the hcall wrapper
function. Rename and update htm_get_dump_hardware to htm_hcall_wrapper()
so that it can be used for other HTM operations as well. Additionally
include parameter "htm_op". Update htmdump module to check the return
code of hcall in a separate function so that it can be reused for other
option too. Add check to disable the interface in guest environment.
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250420180844.53128-2-atrajeev@linux.ibm.com
|
|
This patch adds debugfs interface to export Hardware Trace Macro (HTM)
function data in a LPAR. New hypervisor call "H_HTM" has been
defined to setup, configure, control and dump the HTM data.
This patch supports only dumping of HTM data in a LPAR.
New debugfs folder called "htmdump" has been added under
/sys/kernel/debug/arch path which contains files need to
pass required parameters for the H_HTM dump function. New Kconfig
option called "CONFIG_HTMDUMP" is added in platform/pseries
for the same.
With this module loaded, list of files in debugfs path
/sys/kernel/debug/powerpc/htmdump
coreindexonchip htmtype nodalchipindex nodeindex trace
Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250113164039.302017-2-adubey@linux.ibm.com
|
