| Age | Commit message (Collapse) | Author |
|---|
|
Do not depend on the reset structures.
vector.datap is a kernel memory pointer that needs to be preserved as it
is not a part of the guest vector data.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250403112522.1566629-4-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
RISC-V KVM port is no longer experimental. Let's remove it to avoid
confusion.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250505-kvm_tag_change-v1-1-6dbf6af240af@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
CV18XX
replace newly added precise compatible with old one for existed
clock device of CV18XX series SoCs.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250504104553.1447819-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Sophgo SG2044 SRD3-10 board bases on Sophgo SG2044 SoC.
This board includes 5 uart ports, 5 pcie x8 slots, 1 1G Ethernet port,
1 microSD slot.
Add initial device tree of this board with uart support.
Link: https://lore.kernel.org/r/20250413223507.46480-11-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Since riscv and arm architecture use different interrupt definitions,
use a macro SOC_PERIPHERAL_IRQ mask this difference.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As the cv18xx.dtsi serves as a common peripheral header for all
riscv cv180x/cv181x/sg200x SoCs, it not cover the entire cv18xx
series as there is cv182x and cv183x. So rename the header file
to make it precise.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As sg2000 and sg2002 can boot from an arm a53 core, it is not
suitable to left the riscv cpu definition in the common peripheral
header.
Move the riscv related device into a separate header file, so the
arm subsystem can reuse the common peripheral header.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Although the cv1800b/cv1812h/sg2000/sg2002 share most peripherals,
some basic peripherals, like clock, pinctrl, clint and plint, are
not shared. These are caused by not only historical reason (plic,
clint), but also the fact the device is not the same (clock, pinctrl).
It is good to override device compatible when the SoC number is small,
but now it is a burden for maintenance, and it is kind of annoyed to
explain why using override. So it is time to move this out of the
common peripheral header.
Move all soc related peripheral device from common peripheral header
to the soc specific header to get rid of most compatible override.
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250430012654.235830-2-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add spi controllers for SG2042.
SG2042 uses the upstreamed Synopsys DW SPI IP.
Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com>
Link: https://lore.kernel.org/r/20250425-sfg-spi-v6-3-2dbe7bb46013@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add pinctrl node and related pin configuration for SG2042 SoC.
Link: https://lore.kernel.org/r/20250211051801.470800-9-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
loader
Add bootph-pre-ram hinting to jh7110-common.dtsi:
- i2c5_pins and i2c-pins subnode for connection to eeprom
- eeprom node
- qspi flash configuration subnode
- memory node
- mmc0 for eMMC
- mmc1 for SD Card
- uart0 for serial console
With this the U-Boot SPL secondary program loader may drop such overrides.
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
StarFive VisionFive2 and similar JH7110 boards have an eeprom compatible
with Atmel 24c04. Add the node so this may be used with the at24 driver.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
max 100MHz
Use qspi flash read-delay and spi-max-frequency settings compatible with
U-Boot bootloader.
Observations from testing on Pine64 Star64 hardware within U-Boot bootloader
and read-delay=2 are spi-max-frequency less than 49.8MHz fails to write,
corrupt data writes at 25MHz to 49.799999MHz, and valid data writes at
49.8MHz to 100MHz (not tested above 100MHz). No valid spi-max-frequency
was found for 1<read-delay<=3 and corrupt data with read-delay=3.
Looking around the Linux codebase it is common to see read-delay 2 cycles
with spi-max-frequency 100MHz and testing confirms this to work in both
U-Boot and Linux.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add syscrg clock assignments for CPU, BUS, PERH, and QSPI as required by
boot loader before kernel.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The pin names of MMC0 pinmux is defined in the pinctrl dt binding header
associated with starfive,jh7110-pinctrl .
Include the header file and use these names instead of raw numbers for
defining MMC0 pinmux.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add usb_cdns3 and usb0_pins configuration to support super speed USB
device on the FML13V01 board.
Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
|
|
When the binding was originally written, it was assumed that all
ax45mp-caches had the same properties etc. This has turned out to be
incorrect, as the QiLai SoC has a different number of cache-sets.
Add a specific compatible for the RZ/Five for property enforcement and
in case there turns out to be additional differences between these
implementations of the cache controller.
Acked-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20250512-sphere-plenty-8ce4cd772745@spud
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Leverage GPIO to support system LED to indicate activity of CPUs.
Link: https://lore.kernel.org/r/20250424-03-k1-gpio-v9-3-eaece8cc5a86@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Populate the GPIO node in the device tree for SpacemiT K1 SoC.
Each of 32 pins will act as one bank and map pins to pinctrl controller.
Link: https://lore.kernel.org/r/20250424-03-k1-gpio-v9-2-eaece8cc5a86@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The K1 SoC features two clocks for UART controller, Acquire them
explicitly in the driver. Also it is required to remove the
clock-frequency properties from the uart node, otherwise the new
clock properties are ignored by of_platform_serial_setup() in "8250_of.c".
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Link: https://lore.kernel.org/r/20250424-05-dts-clock-v2-2-17d83a705c4c@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Pinctrl of K1 SoC need two clocks, so explicitly acquire them.
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Link: https://lore.kernel.org/r/20250424-05-dts-clock-v2-1-17d83a705c4c@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Describe the PLL and system controllers that're capable of generating
clock signals in the devicetree.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250508111528.10508-2-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add explicit array bounds to the function prototypes for the parameters
that didn't already get handled by the conversion to use chacha_state:
- chacha_block_*():
Change 'u8 *out' or 'u8 *stream' to u8 out[CHACHA_BLOCK_SIZE].
- hchacha_block_*():
Change 'u32 *out' or 'u32 *stream' to u32 out[HCHACHA_OUT_WORDS].
- chacha_init():
Change 'const u32 *key' to 'const u32 key[CHACHA_KEY_WORDS]'.
Change 'const u8 *iv' to 'const u8 iv[CHACHA_IV_SIZE]'.
No functional changes. This just makes it clear when fixed-size arrays
are expected.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Constructors for PUD/P4D-level pgtables were recently introduced. They
should be called for all pgtables; make sure they are called for special
kernel mappings created by create_pgd_mapping() too.
While at it also switch to using pagetable_alloc() like in
alloc_{pte,pmd}_late().
Link: https://lkml.kernel.org/r/20250408095222.860601-13-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pagetable_{pte,pmd}_ctor(mm, ptdesc) skip the ptlock initialisation if mm
is &init_mm. To avoid unnecessary overhead, it is therefore preferable to
pass the actual mm associated to the PTE/PMD.
Unfortunately, this proves challenging for alloc_{pte,pmd}_late() as the
associated mm is not available at the point where they are called - in
fact not even top-level functions like create_pgd_mapping() are passed the
mm. As a result they both call the ctor with NULL as mm; this is safe but
potentially wasteful.
This is not a new situation, but let's add a couple of comments to clarify
it.
Link: https://lkml.kernel.org/r/20250408095222.860601-11-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit 61444cde9170 ("ARM:
8591/1: mm: use fully constructed struct pages for EFI pgd allocations"),
they also are for special page tables like efi_mm. The one case where
split locks are definitely unused is pgtables owned by init_mm; this is
consistent with the behaviour of apply_to_pte_range().
The approach chosen in this series is therefore to pass the mm associated
to the pgtables being constructed to pagetable_{pte,pmd}_ctor() (patch 1),
and skip ptlock_init() if mm == &init_mm (patch 3 and 7). This makes it
possible to call the PTE ctor/dtor from pte_{alloc,free}_kernel() without
unintended consequences (patch 3). As a result the accounting functions
are now called at all levels for kernel pgtables, and split locks are
never initialised.
In configurations where ptlocks are dynamically allocated (32-bit,
PREEMPT_RT, etc.) and ARCH_ENABLE_SPLIT_PMD_PTLOCK is selected, this
series results in the removal of a kmem_cache allocation for every kernel
PMD. Additionally, for certain architectures that do not use
<asm-generic/pgalloc.h> such as s390, the same optimisation occurs at the
PTE level.
===
Things get more complicated when it comes to special pgtable allocators
(patch 8-12). All architectures need such allocators to create initial
kernel pgtables; we are not concerned with those as the ctor cannot be
called so early in the boot sequence. However, those allocators may also
be used later in the boot sequence or during normal operations. There are
two main use-cases:
1. Mapping EFI memory: efi_mm (arm, arm64, riscv)
2. arch_add_memory(): init_mm
The ctor is already explicitly run (at the PTE/PMD level) in the first
case, as required for pgtables that are not associated with init_mm.
However the same allocators may also be used for the second use-case (or
others), and this is where it gets messy. Patch 1 calls the ctor with
NULL as mm in those situations, as the actual mm isn't available.
Practically this means that ptlocks will be unconditionally initialised.
This is fine on arm - create_mapping_late() is only used for the EFI
mapping. On arm64, __create_pgd_mapping() is also used by
arch_add_memory(); patch 8/9/11 ensure that ctors are called at all levels
with the appropriate mm. The situation is similar on riscv, but
propagating the mm down to the ctor would require significant refactoring.
Since they are already called unconditionally, this series leaves riscv
no worse off - patch 10 adds comments to clarify the situation.
From a cursory look at other architectures implementing arch_add_memory(),
s390 and x86 may also need a similar treatment to add constructor calls.
This is to be taken care of in a future version or as a follow-up.
===
The complications in those special pgtable allocators beg the question:
does it really make sense to treat efi_mm and init_mm differently in e.g.
apply_to_pte_range()? Maybe what we really need is a way to tell if an mm
corresponds to user memory or not, and never use split locks for non-user
mm's. Feedback and suggestions welcome!
This patch (of 12):
In preparation for calling constructors for all kernel page tables while
eliding unnecessary ptlock initialisation, let's pass down the associated
mm to the PTE/PMD level ctors. (These are the two levels where ptlocks
are used.)
In most cases the mm is already around at the point of calling the ctor so
we simply pass it down. This is however not the case for special page
table allocators:
* arch/arm/mm/mmu.c
* arch/arm64/mm/mmu.c
* arch/riscv/mm/init.c
In those cases, the page tables being allocated are either for standard
kernel memory (init_mm) or special page directories, which may not be
associated to any mm. For now let's pass NULL as mm; this will be refined
where possible in future patches.
No functional change in this patch.
Link: https://lore.kernel.org/linux-mm/20250103184415.2744423-1-kevin.brodsky@arm.com/ [1]
Link: https://lore.kernel.org/linux-hardening/20250203101839.1223008-1-kevin.brodsky@arm.com/ [2]
Link: https://lkml.kernel.org/r/20250408095222.860601-1-kevin.brodsky@arm.com
Link: https://lkml.kernel.org/r/20250408095222.860601-2-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: <x86@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ptdump: Drop assumption that pxd_val() is u64", v2.
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM. A similar problem exists for effective_prot(),
although it is restricted to x86 platform.
This series splits note_page() and effective_prot() into individual page
table level specific callbacks which accepts corresponding pxd_t page
table entry as an argument instead and later on all subscribing platforms
could derive pxd_val() from the table entries as required and proceed as
before.
Define ptdesc_t type which describes the basic page table descriptor
layout on arm64 platform. Subsequently all level specific pxxval_t
descriptors are derived from ptdesc_t thus establishing a common original
format, which can also be appropriate for page table entries, masks and
protection values etc which are used at all page table levels.
This patch (of 3):
Last argument passed down in note_page() is u64 assuming pxd_val()
returned value (all page table levels) is 64 bit - which might not be the
case going ahead when D128 page tables is enabled on arm64 platform.
Besides pxd_val() is very platform specific and its type should not be
assumed in generic MM.
Split note_page() into individual page table level specific callbacks
which accepts corresponding pxd_t argument instead and then subscribing
platforms just derive pxd_val() from the entries as required and proceed
as earlier.
Also add a note_page_flush() callback for flushing the last page table
page that was being handled earlier via level = -1.
Link: https://lkml.kernel.org/r/20250407053113.746295-1-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/20250407053113.746295-2-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to syscall_set_arguments() that complements
syscall_get_arguments(), introduce syscall_set_nr() that complements
syscall_get_nr().
syscall_set_nr() is going to be needed along with syscall_set_arguments()
on all HAVE_ARCH_TRACEHOOK architectures to implement
PTRACE_SET_SYSCALL_INFO API.
Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit 7962c2eddbfe ("arch: remove unused function
syscall_set_arguments()") by reusing some of old syscall_set_arguments()
implementations.
[nathan@kernel.org: fix compile time fortify checks]
Link: https://lkml.kernel.org/r/20250408213131.GA2872426@ax162
Link: https://lkml.kernel.org/r/20250303112009.GC24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> [mips]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexey Gladkov (Intel) <legion@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them.
Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures simply call pfn_pte(). Centralise that as the normal
definition and remove the definition of mk_pte() from the architectures
which have either that exact definition or something similar.
Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Richard Weinberger <richard@nod.at>
Cc: <x86@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
|
|
Currently, the verifier inserts a zext instruction right after every 8-,
16- or 32-bit load-acquire, which is already zero-extending. Skip such
redundant zext instructions.
While we are here, update that already-obsolete comment about "skip the
next instruction" in build_body(). Also change emit_atomic_rmw()'s
parameters to keep it consistent with emit_atomic_ld_st().
Note that checking 'insn[1]' relies on 'insn' not being the last
instruction, which should have been guaranteed by the verifier; we
already use 'insn[1]' elsewhere in the file for similar purposes.
Additionally, we don't check if 'insn[1]' is actually a zext for our
load-acquire's dst_reg, or some other registers - in other words, here
we are relying on the verifier to always insert a redundant zext right
after a 8/16/32-bit load-acquire, for its dst_reg.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/10e90e0eab042f924d35ad0d1c1f7ca29f673152.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Support BPF load-acquire (BPF_LOAD_ACQ) and store-release
(BPF_STORE_REL) instructions in the riscv64 JIT compiler. For example,
consider the following 64-bit load-acquire (assuming little-endian):
db 10 00 00 00 01 00 00 r1 = load_acquire((u64 *)(r1 + 0x0))
95 00 00 00 00 00 00 00 exit
opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
imm (0x00000100): BPF_LOAD_ACQ
The JIT compiler will emit an LD instruction followed by a FENCE R,RW
instruction for the above, e.g.:
ld x7,0(x6)
fence r,rw
Similarly, consider the following 16-bit store-release:
cb 21 00 00 10 01 00 00 store_release((u16 *)(r1 + 0x0), w2)
95 00 00 00 00 00 00 00 exit
opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
imm (0x00000110): BPF_STORE_REL
A FENCE RW,W instruction followed by an SH instruction will be emitted,
e.g.:
fence rw,w
sh x2,0(x4)
8-bit and 16-bit load-acquires are zero-extending (cf., LBU, LHU). The
verifier always rejects misaligned load-acquires/store-releases (even if
BPF_F_ANY_ALIGNMENT is set), so the emitted load and store instructions
are guaranteed to be single-copy atomic.
Introduce primitives to emit the relevant (and the most common/used in
the kernel) fences, i.e. fences with R -> RW, RW -> W and RW -> RW.
Rename emit_atomic() to emit_atomic_rmw() to make it clear that it only
handles RMW atomics, and replace its is64 parameter to allow to perform
the required checks on the opsize (BPF_SIZE(code)).
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Co-developed-by: Peilin Ye <yepeilin@google.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/3059c560e537ad43ed19055d2ebbd970c698095a.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We're planning to add support for the load-acquire and store-release
BPF instructions. Define emit_load_<size>() and emit_store_<size>()
to enable/facilitate the (re)use of their code.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Tested-by: Peilin Ye <yepeilin@google.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
[yepeilin@google.com: cosmetic change to commit title]
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/fce89473a5748e1631d18a5917d953460d1ae0d0.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
https://github.com/sophgo/linux into arm/fixes
RISC-V Sophgo Devicetree fixes for v6.15-rc1
Just one minor fix to correct DMA data-width
configuration for CV18xx.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-fixes-for-v6.15-rc1' of https://github.com/sophgo/linux:
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
Link: https://lore.kernel.org/r/MA0P287MB2262454C19B8899BC1694D04FE832@MA0P287MB2262.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Cyan Yang <cyan.yang@sifive.com> says:
This patch set adds four vendor-specific ISA extensions from SiFive:
"xsfvqmaccdod", "xsfvqmaccqoq", "xsfvfnrclipxfqf", and "xsfvfwmaccqqq".
Additionally, a new hwprobe key, RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0,
has been added to query which SiFive vendor extensions are supported on
the current platform.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-1-cyan.yang@sifive.com
* b4-shazam-merge:
riscv: hwprobe: Add SiFive xsfvfwmaccqqq vendor extension
riscv: hwprobe: Document SiFive xsfvfwmaccqqq vendor extension
riscv: Add SiFive xsfvfwmaccqqq vendor extension
dt-bindings: riscv: Add xsfvfwmaccqqq ISA extension description
riscv: hwprobe: Add SiFive xsfvfnrclipxfqf vendor extension
riscv: hwprobe: Document SiFive xsfvfnrclipxfqf vendor extension
riscv: Add SiFive xsfvfnrclipxfqf vendor extension
dt-bindings: riscv: Add xsfvfnrclipxfqf ISA extension description
riscv: hwprobe: Add SiFive vendor extension support and probe for xsfqmaccdod and xsfqmaccqoq
riscv: hwprobe: Document SiFive xsfvqmaccdod and xsfvqmaccqoq vendor extensions
riscv: Add SiFive xsfvqmaccdod and xsfvqmaccqoq vendor extensions
dt-bindings: riscv: Add xsfvqmaccdod and xsfvqmaccqoq ISA extension description
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add hwprobe for SiFive "xsfvfwmaccqqq" vendor extension.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-13-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add SiFive vendor extension "xsfvfwmaccqqq" support to the kernel.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-11-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add hwprobe for SiFive "xsfvfnrclipxfqf" vendor extension.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-9-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add SiFive vendor extension "xsfvfnrclipxfqf" support to the kernel.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-7-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
xsfqmaccdod and xsfqmaccqoq
Add a new hwprobe key "RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0" which allows
userspace to probe for the new vendor extensions from SiFive. Also, add
new hwprobe for SiFive "xsfvqmaccdod" and "xsfvqmaccqoq" vendor
extensions.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-5-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Document the support for sifive vendor extensions using the key
RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0 and two vendor extensions for SiFive
Int8 Matrix Multiplication Instructions using
RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCDOD and
RISCV_HWPROBE_VENDOR_EXT_XSFVQMACCQOQ.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-4-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add SiFive vendor extension support to the kernel with the target of
"xsfvqmaccdod" and "xsfvqmaccqoq".
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Link: https://lore.kernel.org/r/20250418053239.4351-3-cyan.yang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When RISC-V borned, DT_GNU_HASH had already became the de-facto
standard so DT_HASH is just wasting storage space. Remove the explicit
--hash-style=both setting and rely on the distro toolchain default,
which is most likely "gnu" (i.e. generating only DT_GNU_HASH, no
DT_HASH).
Following the logic of commit 48f6430505c0
("arm64/vdso: Remove --hash-style=sysv").
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250224112042.60282-2-xry111@xry111.site
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Cyril Bur <cyrilbur@tenstorrent.com> says:
This series tries to optimize riscv uaccess by allowing the use of
user_access_begin() and user_access_end() which permits grouping user accesses
and avoiding the CSR write penalty for each access.
The error path can also be optimised using asm goto which patches 3 and 4
achieve. This will speed up jumping to labels by avoiding the need of an
intermediary error type variable within the uaccess macros
I did read the discussion this series generated. It isn't clear to me
which direction to take the patches, if any.
* b4-shazam-merge:
riscv: uaccess: use 'asm_goto_output' for get_user()
riscv: uaccess: use 'asm goto' for put_user()
riscv: uaccess: use input constraints for ptr of __put_user()
riscv: implement user_access_begin() and families
riscv: save the SR_SUM status over switches
Link: https://lore.kernel.org/r/20250410070526.3160847-1-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With 'asm goto' we don't need to test the error etc, the exception just
jumps to the error handling directly.
Unlike put_user(), get_user() must work around GCC bugs [1] when using
output clobbers in an asm goto statement.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 # 1
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
[Cyril Bur: Rewritten commit message]
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250410070526.3160847-6-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
With 'asm goto' we don't need to test the error etc, the exception just
jumps to the error handling directly.
Because there are no output clobbers which could trigger gcc bugs [1]
the use of asm_goto_output() macro is not necessary here. Not using
asm_goto_output() is desirable as the generated output asm will be
cleaner.
Use of the volatile keyword is redundant as per gcc 14.2.0 manual section
6.48.2.7 Goto Labels:
> Also note that an asm goto statement is always implicitly considered
volatile.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 # 1
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
[Cyril Bur: Rewritten commit message]
Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250410070526.3160847-5-cyrilbur@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
