| Age | Commit message (Collapse) | Author |
|---|
|
T-HEAD TH1520 SoC requires to put the GPU out of the reset state as part
of the power-up sequence.
Link: https://lore.kernel.org/linux-riscv/81e53e3a-5873-44c7-9070-5596021daa42@samsung.com/
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
[drew: remove hunk that included thead,th1520-reset.h]
Signed-off-by: Drew Fustini <drew@pdp7.com>
|
|
Enable GPIO support, in order to activate follow-up GPIO LED,
and ethernet reset pin.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
After some recent changes to the RISC-V crypto code that turned some
indirect function calls into direct ones, builds with CONFIG_CFI_CLANG
fail with:
ld.lld: error: undefined symbol: __kcfi_typeid_sm3_transform_zvksh_zvkb
>>> referenced by arch/riscv/crypto/sm3-riscv64-zvksh-zvkb.o:(.text+0x2) in archive vmlinux.a
ld.lld: error: undefined symbol: __kcfi_typeid_sha512_transform_zvknhb_zvkb
>>> referenced by arch/riscv/crypto/sha512-riscv64-zvknhb-zvkb.o:(.text+0x2) in archive vmlinux.a
ld.lld: error: undefined symbol: __kcfi_typeid_sha256_transform_zvknha_or_zvknhb_zvkb
>>> referenced by arch/riscv/crypto/sha256-riscv64-zvknha_or_zvknhb-zvkb.o:(.text+0x2) in archive vmlinux.a
As these functions are no longer indirectly called (i.e., have their
address taken), the compiler will not emit __kcfi_typeid symbols for
them but SYM_TYPED_FUNC_START expects these to exist at link time.
Switch the definitions of these functions to use SYM_FUNC_START, as they
no longer need kCFI type information since they are only called
directly.
Fixes: 1523eaed0ac5 ("crypto: riscv/sm3 - Use API partial block handling")
Fixes: 561aab1104d8 ("crypto: riscv/sha512 - Use API partial block handling")
Fixes: e6c5597badf2 ("crypto: riscv/sha256 - Use API partial block handling")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up.
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-2-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The flush_icache_range() function is implemented as a "function-like
macro with unused parameters", which can result in "unused variables"
warnings.
Replace the macro with a static inline function, as advised by
Documentation/process/coding-style.rst.
Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250419111402.1660267-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This was triggered by one of my mis-uses causing odd build warnings on
sparc in linux-next, but while figuring out why the "obviously correct"
use of cc-option caused such odd breakage, I found eight other cases of
the same thing in the tree.
The root cause is that 'cc-option' doesn't work for checking negative
warning options (ie things like '-Wno-stringop-overflow') because gcc
will silently accept options it doesn't recognize, and so 'cc-option'
ends up thinking they are perfectly fine.
And it all works, until you have a situation where _another_ warning is
emitted. At that point the compiler will go "Hmm, maybe the user
intended to disable this warning but used that wrong option that I
didn't recognize", and generate a warning for the unrecognized negative
option.
Which explains why we have several cases of this in the tree: the
'cc-option' test really doesn't work for this situation, but most of the
time it simply doesn't matter that ity doesn't work.
The reason my recently added case caused problems on sparc was pointed
out by Thomas Weißschuh: the sparc build had a previous explicit warning
that then triggered the new one.
I think the best fix for this would be to make 'cc-option' a bit smarter
about this sitation, possibly by adding an intentional warning to the
test case that then triggers the unrecognized option warning reliably.
But the short-term fix is to replace 'cc-option' with an existing helper
designed for this exact case: 'cc-disable-warning', which picks the
negative warning but uses the positive form for testing the compiler
support.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20250422204718.0b4e3f81@canb.auug.org.au/
Explained-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the Crypto API partial block handling.
As this was the last user relying on crypto/ghash.h for gf128mul.h,
remove the unnecessary inclusion of gf128mul.h from crypto/ghash.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Though the module_exit functions are now no-ops, they should still be
defined, since otherwise the modules become unremovable.
Fixes: 08820553f33a ("crypto: arm/chacha - remove the redundant skcipher algorithms")
Fixes: 8c28abede16c ("crypto: arm64/chacha - remove the skcipher algorithms")
Fixes: f7915484c020 ("crypto: powerpc/chacha - remove the skcipher algorithms")
Fixes: ceba0eda8313 ("crypto: riscv/chacha - implement library instead of skcipher")
Fixes: 632ab0978f08 ("crypto: x86/chacha - remove the skcipher algorithms")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
function"
Nylon Chen <nylon.chen@sifive.com> says:
1. Adds support for ZCB compressed instructions (C.LHU, C.LH, C.SH).
2. Fixes a bug where copy_from/to_user() calls in non-sleepable contexts
triggered attempts to sleep.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen nylon.chen@sifive.com
Nylon Chen (2):
riscv: misaligned: Add handling for ZCB instructions
riscv: misaligned: fix sleeping function called during misaligned
access handling
* b4-shazam-merge:
riscv: misaligned: fix sleeping function called during misaligned access handling
riscv: misaligned: Add handling for ZCB instructions
Link: https://lore.kernel.org/r/20250411073850.3699180-1-nylon.chen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add support for the Zcb extension's compressed half-word instructions
(C.LHU, C.LH, and C.SH) in the RISC-V misaligned access trap handler.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Link: https://lore.kernel.org/r/20250411073850.3699180-2-nylon.chen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
handling
Use copy_from_user_nofault() and copy_to_user_nofault() instead of
copy_from/to_user functions in the misaligned access trap handlers.
The following bug report was found when executing misaligned memory
accesses:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:162
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 115, name: two
preempt_count: 0, expected: 0
CPU: 0 UID: 0 PID: 115 Comm: two Not tainted 6.14.0-rc5 #24
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff800160ea>] dump_backtrace+0x1c/0x24
[<ffffffff80002304>] show_stack+0x28/0x34
[<ffffffff80010fae>] dump_stack_lvl+0x4a/0x68
[<ffffffff80010fe0>] dump_stack+0x14/0x1c
[<ffffffff8004e44e>] __might_resched+0xfa/0x104
[<ffffffff8004e496>] __might_sleep+0x3e/0x62
[<ffffffff801963c4>] __might_fault+0x1c/0x24
[<ffffffff80425352>] _copy_from_user+0x28/0xaa
[<ffffffff8000296c>] handle_misaligned_store+0x204/0x254
[<ffffffff809eae82>] do_trap_store_misaligned+0x24/0xee
[<ffffffff809f4f1a>] handle_exception+0x146/0x152
Fixes: b686ecdeacf6 ("riscv: misaligned: Restrict user access to kernel memory")
Fixes: 441381506ba7 ("riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code")
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Link: https://lore.kernel.org/r/20250411073850.3699180-3-nylon.chen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into fixes
riscv fixes for 6.15-rc3
- A couple of fixes regarding module relocations
- Fix a build error by implementing missing alternative macros
- Another fix for kexec by fixing /proc/iomem
* tag 'riscv-fixes-6.15-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: Avoid fortify warning in syscall_get_arguments()
riscv: Provide all alternative macros all the time
riscv: module: Allocate PLT entries for R_RISCV_PLT32
riscv: module: Fix out-of-bounds relocation access
riscv: Properly export reserved regions in /proc/iomem
riscv: Fix unaligned access info messages
|
|
The setting of EXPERT is a leftover from when the riscv defconfig was
first added. As mentioned in the EXPERT Kconfig help text it is not
intended to be set in the usual case.
Upon removal a bunch of intrusive debug-related kernel options are no
longer set, which is good. A few may want to come back in the future but
let those be advocated for on a case by case basis.
NAMESPACES, SYSFS_SYSCALL and MEDIA_SUPPORT_FILTER default on and thus
fall out of the defconfig.
Set VIDEO_CADENCE_CSI2RX=y to ensure VIDEO_CADENCE_CSI2RX stays enabled.
Set DEBUG_KERNEL=y in line with other arch defconfigs. This turns on
tracing.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20250415122832.982610-1-joel@jms.id.au
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
WangYuli <wangyuli@uniontech.com> says:
1. The arch_kgdb_breakpoint() function defines the kgdb_compiled_break
symbol using inline assembly.
There's a potential issue where the compiler might inline
arch_kgdb_breakpoint(), which would then define the kgdb_compiled_break
symbol multiple times, leading to fail to link vmlinux.o.
This isn't merely a potential compilation problem. The intent here
is to determine the global symbol address of kgdb_compiled_break,
and if this function is inlined multiple times, it would logically
be a grave error.
2. Remove ".option norvc/.option rvc" to fix a bug that the C extension
would unconditionally enable even if the kernel is being built with
CONFIG_RISCV_ISA_C=n.
* b4-shazam-merge:
riscv: KGDB: Remove ".option norvc/.option rvc" for kgdb_compiled_break
riscv: KGDB: Do not inline arch_kgdb_breakpoint()
Link: https://lore.kernel.org/r/D5A83DF3A06E1DF9+20250411072905.55134-1-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
[ Quoting Samuel Holland: ]
This is a separate issue, but using ".option rvc" here is a bug.
It will unconditionally enable the C extension for the rest of
the file, even if the kernel is being built with CONFIG_RISCV_ISA_C=n.
[ Quoting Palmer Dabbelt: ]
We're just looking at the address of kgdb_compiled_break, so it's
fine if it ends up as a c.ebreak.
[ Quoting Alexandre Ghiti: ]
.option norvc is used to prevent the assembler from using compressed
instructions, but it's generally used when we need to ensure the
size of the instructions that are used, which is not the case here
as noted by Palmer since we only care about the address. So yes
it will work fine with C enabled :)
So let's just remove them all.
Link: https://lore.kernel.org/all/4b4187c1-77e5-44b7-885f-d6826723dd9a@sifive.com/
Link: https://lore.kernel.org/all/mhng-69513841-5068-441d-be8f-2aeebdc56a08@palmer-ri-x1c9a/
Link: https://lore.kernel.org/all/23693e7f-4fff-40f3-a437-e06d827278a5@ghiti.fr/
Fixes: fe89bd2be866 ("riscv: Add KGDB support")
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/8B431C6A4626225C+20250411073222.56820-2-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The arch_kgdb_breakpoint() function defines the kgdb_compiled_break
symbol using inline assembly.
There's a potential issue where the compiler might inline
arch_kgdb_breakpoint(), which would then define the kgdb_compiled_break
symbol multiple times, leading to fail to link vmlinux.o.
This isn't merely a potential compilation problem. The intent here
is to determine the global symbol address of kgdb_compiled_break,
and if this function is inlined multiple times, it would logically
be a grave error.
Link: https://lore.kernel.org/all/4b4187c1-77e5-44b7-885f-d6826723dd9a@sifive.com/
Link: https://lore.kernel.org/all/5b0adf9b-2b22-43fe-ab74-68df94115b9a@ghiti.fr/
Link: https://lore.kernel.org/all/23693e7f-4fff-40f3-a437-e06d827278a5@ghiti.fr/
Fixes: fe89bd2be866 ("riscv: Add KGDB support")
Co-developed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/F22359AFB6FF9FD8+20250411073222.56820-1-wangyuli@uniontech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning
because of the memcpy() in syscall_get_arguments():
In file included from include/linux/string.h:392,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from arch/riscv/include/asm/processor.h:55,
from include/linux/sched.h:13,
from kernel/ptrace.c:13:
In function 'fortify_memcpy_chk',
inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2:
include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
580 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The fortified memcpy() routine enforces that the source is not overread
and the destination is not overwritten if the size of either field and
the size of the copy are known at compile time. The memcpy() in
syscall_get_arguments() intentionally overreads from a1 to a5 in
'struct pt_regs' but this is bigger than the size of a1.
Normally, this could be solved by wrapping a1 through a5 with
struct_group() but there was already a struct_group() applied to these
members in commit bba547810c66 ("riscv: tracing: Fix
__write_overflow_field in ftrace_partial_regs()").
Just avoid memcpy() altogether and write the copying of args from regs
manually, which clears up the warning at the expense of three extra
lines of code.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Dmitry V. Levin <ldv@strace.io>
Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_arguments-v1-1-7853436d4755@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Move the sm3 library code into lib/crypto.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The DRM Imagination GPU requires a power-domain driver. In the T-HEAD
TH1520 SoC implements power management capabilities through the E902
core, which can be communicated with through the mailbox, using firmware
protocol.
Add AON node, which servers as a power-domain controller.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
|
|
We need to provide all six forms of the alternative macros
(ALTERNATIVE, ALTERNATIVE_2, _ALTERNATIVE_CFG, _ALTERNATIVE_CFG_2,
__ALTERNATIVE_CFG, __ALTERNATIVE_CFG_2) for all four cases derived
from the two ifdefs (RISCV_ALTERNATIVE, __ASSEMBLY__) in order to
ensure all configs can compile. Define this missing ones and ensure
all are defined to consume all parameters passed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504130710.3IKz6Ibs-lkp@intel.com/
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250414120947.135173-2-ajones@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
apply_r_riscv_plt32_rela() may need to emit a PLT entry for the
referenced symbol, so there must be space allocated in the PLT.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250409171526.862481-2-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
The current code allows rel[j] to access one element past the end of the
relocation section. Simplify to num_relocations which is equivalent to
the existing size expression.
Fixes: 080c4324fa5e ("riscv: optimize ELF relocation function in riscv")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409171526.862481-1-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
The /proc/iomem represents the kernel's memory map. Regions marked
with "Reserved" tells the user that the range should not be tampered
with. Kexec-tools, when using the older kexec_load syscall relies on
the "Reserved" regions to build the memory segments, that will be the
target of the new kexec'd kernel.
The RISC-V port tries to expose all reserved regions to userland, but
some regions were not properly exposed: Regions that resided in both
the "regular" and reserved memory block, e.g. the EFI Memory Map. A
missing entry could result in reserved memory being overwritten.
It turns out, that arm64, and loongarch had a similar issue a while
back:
commit d91680e687f4 ("arm64: Fix /proc/iomem for reserved but not memory regions")
commit 50d7ba36b916 ("arm64: export memblock_reserve()d regions via /proc/iomem")
Similar to the other ports, resolve the issue by splitting the regions
in an arch initcall, since we need a working allocator.
Fixes: ffe0e5261268 ("RISC-V: Improve init_resources()")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409182129.634415-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Ensure we only print messages about command line parameters when
the parameters are actually in use. Also complain about the use
of the vector parameter when vector support isn't available.
Fixes: aecb09e091dc ("riscv: Add parameter for skipping access speed tests")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdVEp2_ho51gkpLLJG2HimqZ1gZ0fa=JA4uNNZjFFqaPMg@mail.gmail.com/
Closes: https://lore.kernel.org/all/CAMuHMdWVMP0MYCLFq+b7H_uz-2omdFiDDUZq0t_gw0L9rrJtkQ@mail.gmail.com/
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409153650.84433-2-ajones@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning
because of the memcpy() in syscall_get_arguments():
In file included from include/linux/string.h:392,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from arch/riscv/include/asm/processor.h:55,
from include/linux/sched.h:13,
from kernel/ptrace.c:13:
In function 'fortify_memcpy_chk',
inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2:
include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
580 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The fortified memcpy() routine enforces that the source is not overread
and the destination is not overwritten if the size of either field and
the size of the copy are known at compile time. The memcpy() in
syscall_get_arguments() intentionally overreads from a1 to a5 in
'struct pt_regs' but this is bigger than the size of a1.
Normally, this could be solved by wrapping a1 through a5 with
struct_group() but there was already a struct_group() applied to these
members in commit bba547810c66 ("riscv: tracing: Fix
__write_overflow_field in ftrace_partial_regs()").
Just avoid memcpy() altogether and write the copying of args from regs
manually, which clears up the warning at the expense of three extra
lines of code.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry V. Levin <ldv@strace.io>
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_arguments-v1-1-7853436d4755@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
T-Head SoCs feature separate power domains (power islands) for major
components like the GPU, Audio, and NPU. To manage the power states of
these components effectively, the kernel requires generic power domain
support.
This commit enables `CONFIG_PM_GENERIC_DOMAINS` for T-Head SoCs,
allowing the power domain driver for these components to be compiled and
integrated. This ensures proper power management and energy efficiency
on T-Head platforms.
By selecting `PM_GENERIC_DOMAINS`, we provide the necessary framework
for the power domain drivers to function correctly on RISC-V
architecture with T-Head SoCs.
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Acked-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The number of relocations may be a huge value that is unallocatable
by kmalloc. Use kvmalloc instead so that it does not fail.
Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations")
Suggested-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Will Pierce <wgpierce17@gmail.com>
Link: https://lore.kernel.org/r/20250402081426.5197-1-wgpierce17@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Following the example of the crc32 and crc32c code, make the crypto
subsystem register both generic and architecture-optimized chacha20,
xchacha20, and xchacha12 skcipher algorithms, all implemented on top of
the appropriate library functions. This eliminates the need for every
architecture to implement the same skcipher glue code.
To register the architecture-optimized skciphers only when
architecture-optimized code is actually being used, add a function
chacha_is_arch_optimized() and make each arch implement it. Change each
architecture's ChaCha module_init function to arch_initcall so that the
CPU feature detection is guaranteed to run before
chacha_is_arch_optimized() gets called by crypto/chacha.c. In the case
of s390, remove the CPU feature based module autoloading, which is no
longer needed since the module just gets pulled in via function linkage.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently the RISC-V optimized ChaCha20 is only wired up to the
crypto_skcipher API, which makes it unavailable to users of the library
API. The crypto_skcipher API for ChaCha20 is going to change to be
implemented on top of the library API, so the library API needs to be
supported. And of course it's needed anyway to serve the library users.
Therefore, change the RISC-V ChaCha20 code to implement the library API
instead of the crypto_skcipher API.
The library functions take the ChaCha state matrix directly (instead of
key and IV) and support both ChaCha20 and ChaCha12. To make the RISC-V
code work properly for that, change the assembly code to take the state
matrix directly and add a nrounds parameter.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.15-rc1, part 2
* A bunch of fixes:
- 2 fixes in the purgatory code which prevented kexec to work
- Workaround an issue with gcc-15
* tag 'riscv-mw2-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
RISC-V: add vector extension validation checks
|
|
To support fast gup, the commit 69be3fb111e7 ("riscv: enable
MMU_GATHER_RCU_TABLE_FREE for SMP && MMU") did the following:
1) use tlb_remove_page_ptdesc() for those platforms which use IPI to
perform TLB shootdown
2) use tlb_remove_ptdesc() for those platforms which use SBI to perform
TLB shootdown
The tlb_remove_page_ptdesc() is the wrapper of the tlb_remove_page(). By
design, the tlb_remove_page() should be used to remove a normal page from
a page table entry, and should not be used for page table pages.
The tlb_remove_ptdesc() is the wrapper of the tlb_remove_table(), which is
designed specifically for freeing page table pages. If the
CONFIG_MMU_GATHER_TABLE_FREE is enabled, the tlb_remove_table() will use
semi RCU to free page table pages, that is:
- batch table freeing: asynchronous free by RCU
- single table freeing: IPI + synchronous free
If the CONFIG_MMU_GATHER_TABLE_FREE is disabled, the tlb_remove_table()
will fall back to pagetable_dtor() + tlb_remove_page().
For case 1), since we need to perform TLB shootdown before freeing the
page table page, the local_irq_save() in fast gup can block the freeing
and protect the fast gup page walker. Therefore we can ensure safety by
just using tlb_remove_page_ptdesc(). In addition, we can also the
tlb_remove_ptdesc()/tlb_remove_table() to achieve it, and it doesn't
matter whether CONFIG_MMU_GATHER_RCU_TABLE_FREE is selected. And in
theory, the performance of freeing pages asynchronously via RCU will not
be lower than synchronous free.
For case 2), since local_irq_save() only disable S-privilege IPI irq but
not M-privilege's, which is used by the SBI implementation to perform TLB
shootdown, so we must select CONFIG_MMU_GATHER_RCU_TABLE_FREE and use
tlb_remove_ptdesc() to ensure safety. The riscv selects this config for
SMP && MMU, the CONFIG_RISCV_SBI is dependent on MMU. Therefore, only the
UP system may have the situation where CONFIG_MMU_GATHER_RCU_TABLE_FREE is
disabled but CONFIG_RISCV_SBI is enabled. But there is no freeing vs fast
gup race in the UP system.
So, in summary, we can use tlb_remove_ptdesc() to support fast gup in all
cases, and this interface is specifically designed for page table pages.
So let's use it unconditionally.
Link: https://lkml.kernel.org/r/9025595e895515515c95e48db54b29afa489c41d.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
.option arch clobbers .option norvc. Prevent gas from emitting
compressed instructions in the runtime const alternative blocks by
setting .option norvc after .option arch. This issue starts appearing on
gcc 15, which adds zca to the march.
Reported by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: a44fb5722199 ("riscv: Add runtime constant support")
Closes: https://lore.kernel.org/all/cc8f3525-20b7-445b-877b-2add28a160a2@gmail.com/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Link: https://lore.kernel.org/r/20250331-fix_runtime_const_norvc-v1-1-89bc62687ab8@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Old toolchain like gcc 8.5.0 does not support zba, so we must check that
the toolchain supports this extension before using it in the kernel.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503281836.8pntHm6I-lkp@intel.com/
Link: https://lore.kernel.org/r/20250328115422.253670-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
When a crashkernel is launched on RISC-V, the entry to purgatory is
done by trapping via the stvec CSR. From riscv_kexec_norelocate():
| ...
| /*
| * Switch to physical addressing
| * This will also trigger a jump to CSR_STVEC
| * which in this case is the address of the new
| * kernel.
| */
| csrw CSR_STVEC, a2
| csrw CSR_SATP, zero
stvec requires that the address is 4B aligned, which was not the case,
e.g.:
| Loaded purgatory at 0xffffc000
| kexec_file: kexec_file_load: type:1, start:0xffffd232 head:0x4 flags:0x6
The address 0xffffd232 not 4B aligned.
Correct by adding proper function alignment.
With this change, crashkernels loaded with kexec-file will be able to
properly enter the purgatory.
Fixes: 736e30af583fb ("RISC-V: Add purgatory")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250328085313.1193815-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Commit 58ff537109ac ("riscv: Omit optimized string routines when
using KASAN") introduced calls to EXPORT_SYMBOL() in assembly string
routines, which result in R_RISCV_64 relocations against
.export_symbol section. As these rountines are reused by RISC-V
purgatory and our relocator doesn't recognize these relocations, this
fails kexec-file-load with dmesg like
[ 11.344251] kexec_image: Unknown rela relocation: 2
[ 11.345972] kexec_image: Error loading purgatory ret=-8
Let's support R_RISCV_64 relocation to fix kexec on 64-bit RISC-V.
32-bit variant isn't covered since KEXEC_FILE and KEXEC_PURGATORY isn't
available.
Fixes: 58ff537109ac ("riscv: Omit optimized string routines when using KASAN")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250326051445.55131-2-ziyao@disroot.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Yo,
This series is partly leveraging Clement's work adding a validate
callback in the extension detection code so that things like checking
for whether a vector crypto extension is usable can be done like:
has_extension(<vector crypto>)
rather than
has_vector() && has_extension(<vector crypto>)
which Eric pointed out was a poor design some months ago.
The rest of this is adding some requirements to the bindings that
prevent combinations of extensions disallowed by the ISA.
There's a bunch of over-long lines in here, but I thought that the
over-long lines were clearer than breaking them up.
Cheers,
Conor.
* patches from https://lore.kernel.org/r/20250312-abide-pancreas-3576b8c44d2c@spud:
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
RISC-V: add vector extension validation checks
Link: https://lore.kernel.org/r/20250312-abide-pancreas-3576b8c44d2c@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Ryan sent a fix [1] for arm64 that applies to riscv too: in some hugetlb
functions, we must not use the pte value to get the size of a mapping
because the pte may not be present.
So use the already present size parameter for huge_pte_clear() and the
newly introduced size parameter for huge_ptep_get_and_clear(). And make
sure to gather A/D bits only on present ptes.
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Link: https://lore.kernel.org/all/20250217140419.1702389-1-ryan.roberts@arm.com/ [1]
Link: https://lore.kernel.org/r/20250317072551.572169-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
Firmware randomly releases cores, so CPU numbers don't linearly map
to hartids. When the system has an exception, we care more about hartids.
Adding "dyndbg="file smpboot.c +p" loglevel=8" to the cmdline can output
the hartid.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250303083424.14309-1-cuiyunhui@bytedance.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
|
|
.option arch clobbers .option norvc. Prevent gas from emitting
compressed instructions in the runtime const alternative blocks by
setting .option norvc after .option arch. This issue starts appearing on
gcc 15, which adds zca to the march.
Reported by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: a44fb5722199 ("riscv: Add runtime constant support")
Closes: https://lore.kernel.org/all/cc8f3525-20b7-445b-877b-2add28a160a2@gmail.com/
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250331-fix_runtime_const_norvc-v1-1-89bc62687ab8@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove legacy compression interface
- Improve scatterwalk API
- Add request chaining to ahash and acomp
- Add virtual address support to ahash and acomp
- Add folio support to acomp
- Remove NULL dst support from acomp
Algorithms:
- Library options are fuly hidden (selected by kernel users only)
- Add Kerberos5 algorithms
- Add VAES-based ctr(aes) on x86
- Ensure LZO respects output buffer length on compression
- Remove obsolete SIMD fallback code path from arm/ghash-ce
Drivers:
- Add support for PCI device 0x1134 in ccp
- Add support for rk3588's standalone TRNG in rockchip
- Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93
- Fix bugs in tegra uncovered by multi-threaded self-test
- Fix corner cases in hisilicon/sec2
Others:
- Add SG_MITER_LOCAL to sg miter
- Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp"
* tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits)
crypto: testmgr - Add multibuffer acomp testing
crypto: acomp - Fix synchronous acomp chaining fallback
crypto: testmgr - Add multibuffer hash testing
crypto: hash - Fix synchronous ahash chaining fallback
crypto: arm/ghash-ce - Remove SIMD fallback code path
crypto: essiv - Replace memcpy() + NUL-termination with strscpy()
crypto: api - Call crypto_alg_put in crypto_unregister_alg
crypto: scompress - Fix incorrect stream freeing
crypto: lib/chacha - remove unused arch-specific init support
crypto: remove obsolete 'comp' compression API
crypto: compress_null - drop obsolete 'comp' implementation
crypto: cavium/zip - drop obsolete 'comp' implementation
crypto: zstd - drop obsolete 'comp' implementation
crypto: lzo - drop obsolete 'comp' implementation
crypto: lzo-rle - drop obsolete 'comp' implementation
crypto: lz4hc - drop obsolete 'comp' implementation
crypto: lz4 - drop obsolete 'comp' implementation
crypto: deflate - drop obsolete 'comp' implementation
crypto: 842 - drop obsolete 'comp' implementation
crypto: nx - Migrate to scomp API
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
