| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"A set of patches to prevent crashes in SGX enclaves under heavy memory
pressure:
SGX uses normal RAM allocated from special shmem files as backing
storage when it runs out of SGX memory (EPC). The code was overly
aggressive when freeing shmem pages and was inadvertently freeing
perfectly good data. This resulted in failures in the SGX instructions
used to swap data back into SGX memory.
This turned out to be really hard to trigger in mainline. It was
originally encountered testing the out-of-tree "SGX2" patches, but
later reproduced on mainline.
Fix the data loss by being more careful about truncating pages out of
the backing storage and more judiciously setting pages dirty"
* tag 'x86_sgx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Ensure no data in PCMD page after truncate
x86/sgx: Fix race between reclaimer and page fault handler
x86/sgx: Obtain backing storage page with enclave mutex held
x86/sgx: Mark PCMD page as dirty when modifying contents
x86/sgx: Disconnect backing page references from dirty status
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"A variety of fixes which don't fit any other tip bucket:
- Remove unnecessary function export
- Correct asm constraint
- Fix __setup handlers retval"
* tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
x86: Fix return value of __setup handlers
x86/delay: Fix the wrong asm constraint in delay_loop()
x86/amd_nb: Unexport amd_cache_northbridges()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Borislav Petkov:
- Add Raptor Lake to the set of CPU models which support splitlock
- Make life miserable for apps using split locks by slowing them down
considerably while the rest of the system remains responsive. The
hope is it will hurt more and people will really fix their misaligned
locks apps. As a result, free a TIF bit.
* tag 'x86_splitlock_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Enable the split lock feature on Raptor Lake
x86/split-lock: Remove unused TIF_SLD bit
x86/split_lock: Make life miserable for split lockers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Serious sanitization and cleanup of the whole APERF/MPERF and
frequency invariance code along with removing the need for
unnecessary IPIs
- Finally remove a.out support
- The usual trivial cleanups and fixes all over x86
* tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86: Remove empty files
x86/speculation: Add missing srbds=off to the mitigations= help text
x86/prctl: Remove pointless task argument
x86/aperfperf: Make it correct on 32bit and UP kernels
x86/aperfmperf: Integrate the fallback code from show_cpuinfo()
x86/aperfmperf: Replace arch_freq_get_on_cpu()
x86/aperfmperf: Replace aperfmperf_get_khz()
x86/aperfmperf: Store aperf/mperf data for cpu frequency reads
x86/aperfmperf: Make parts of the frequency invariance code unconditional
x86/aperfmperf: Restructure arch_scale_freq_tick()
x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct
x86/aperfmperf: Untangle Intel and AMD frequency invariance init
x86/aperfmperf: Separate AP/BP frequency invariance init
x86/smp: Move APERF/MPERF code where it belongs
x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu()
x86/process: Fix kernel-doc warning due to a changed function name
x86: Remove a.out support
x86/mm: Replace nodes_weight() with nodes_empty() where appropriate
x86: Replace cpumask_weight() with cpumask_empty() where appropriate
x86/pkeys: Remove __arch_set_user_pkey_access() declaration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Borislav Petkov:
- Remove a bunch of chicken bit options to turn off CPU features which
are not really needed anymore
- Misc fixes and cleanups
* tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add missing prototype for unpriv_ebpf_notify()
x86/pm: Fix false positive kmemleak report in msr_build_context()
x86/speculation/srbds: Do not try to turn mitigation off when not supported
x86/cpu: Remove "noclflush"
x86/cpu: Remove "noexec"
x86/cpu: Remove "nosmep"
x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
x86/cpu: Remove "nosep"
x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Simplification of the AMD MCE error severity grading logic along with
supplying critical panic MCEs with accompanying error messages for
more human-friendly diagnostics.
- Misc fixes
* tag 'ras_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Add messages for panic errors in AMD's MCE grading
x86/mce: Simplify AMD severity grading logic
x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails
x86/mce: Avoid unnecessary padding in struct mce_bank
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV-SNP support from Borislav Petkov:
"The third AMD confidential computing feature called Secure Nested
Paging.
Add to confidential guests the necessary memory integrity protection
against malicious hypervisor-based attacks like data replay, memory
remapping and others, thus achieving a stronger isolation from the
hypervisor.
At the core of the functionality is a new structure called a reverse
map table (RMP) with which the guest has a say in which pages get
assigned to it and gets notified when a page which it owns, gets
accessed/modified under the covers so that the guest can take an
appropriate action.
In addition, add support for the whole machinery needed to launch a
SNP guest, details of which is properly explained in each patch.
And last but not least, the series refactors and improves parts of the
previous SEV support so that the new code is accomodated properly and
not just bolted on"
* tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/entry: Fixup objtool/ibt validation
x86/sev: Mark the code returning to user space as syscall gap
x86/sev: Annotate stack change in the #VC handler
x86/sev: Remove duplicated assignment to variable info
x86/sev: Fix address space sparse warning
x86/sev: Get the AP jump table address from secrets page
x86/sev: Add missing __init annotations to SEV init routines
virt: sevguest: Rename the sevguest dir and files to sev-guest
virt: sevguest: Change driver name to reflect generic SEV support
x86/boot: Put globals that are accessed early into the .data section
x86/boot: Add an efi.h header for the decompressor
virt: sevguest: Fix bool function returning negative value
virt: sevguest: Fix return value check in alloc_shared_pages()
x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
virt: sevguest: Add support to get extended report
virt: sevguest: Add support to derive key
virt: Add SEV-SNP guest driver
x86/sev: Register SEV-SNP guest request platform device
x86/sev: Provide support for SNP guest request NAEs
...
|
|
Merge APEI material, changes related to DPTF, ACPI-related x86 cleanup
and documentation improvement for 5.19-rc1:
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero
page (Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
* acpi-apei:
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: APEI: Fix missing ERST record id
* acpi-dptf:
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
* acpi-x86:
x86: ACPI: Make mp_config_acpi_gsi() a void function
* acpi-docs:
ACPI: docs: enumeration: Unify Package () for properties (part 2)
|
|
The Shared Buffers Data Sampling (SBDS) variant of Processor MMIO Stale
Data vulnerabilities may expose RDRAND, RDSEED and SGX EGETKEY data.
Mitigation for this is added by a microcode update.
As some of the implications of SBDS are similar to SRBDS, SRBDS mitigation
infrastructure can be leveraged by SBDS. Set X86_BUG_SRBDS and use SRBDS
mitigation.
Mitigation is enabled by default; use srbds=off to opt-out. Mitigation
status can be checked from below file:
/sys/devices/system/cpu/vulnerabilities/srbds
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Currently, Linux disables SRBDS mitigation on CPUs not affected by
MDS and have the TSX feature disabled. On such CPUs, secrets cannot
be extracted from CPU fill buffers using MDS or TAA. Without SRBDS
mitigation, Processor MMIO Stale Data vulnerabilities can be used to
extract RDRAND, RDSEED, and EGETKEY data.
Do not disable SRBDS mitigation by default when CPU is also affected by
Processor MMIO Stale Data vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Add the sysfs reporting file for Processor MMIO Stale Data
vulnerability. It exposes the vulnerability and mitigation state similar
to the existing files for the other hardware vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
When the CPU is affected by Processor MMIO Stale Data vulnerabilities,
Fill Buffer Stale Data Propagator (FBSDP) can propagate stale data out
of Fill buffer to uncore buffer when CPU goes idle. Stale data can then
be exploited with other variants using MMIO operations.
Mitigate it by clearing the Fill buffer before entering idle state.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
MDS, TAA and Processor MMIO Stale Data mitigations rely on clearing CPU
buffers. Moreover, status of these mitigations affects each other.
During boot, it is important to maintain the order in which these
mitigations are selected. This is especially true for
md_clear_update_mitigation() that needs to be called after MDS, TAA and
Processor MMIO Stale Data mitigation selection is done.
Introduce md_clear_select_mitigation(), and select all these mitigations
from there. This reflects relationships between these mitigations and
ensures proper ordering.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst.
These vulnerabilities are broadly categorized as:
Device Register Partial Write (DRPW):
Some endpoint MMIO registers incorrectly handle writes that are
smaller than the register size. Instead of aborting the write or only
copying the correct subset of bytes (for example, 2 bytes for a 2-byte
write), more bytes than specified by the write transaction may be
written to the register. On some processors, this may expose stale
data from the fill buffers of the core that created the write
transaction.
Shared Buffers Data Sampling (SBDS):
After propagators may have moved data around the uncore and copied
stale data into client core fill buffers, processors affected by MFBDS
can leak data from the fill buffer.
Shared Buffers Data Read (SBDR):
It is similar to Shared Buffer Data Sampling (SBDS) except that the
data is directly read into the architectural software-visible state.
An attacker can use these vulnerabilities to extract data from CPU fill
buffers using MDS and TAA methods. Mitigate it by clearing the CPU fill
buffers using the VERW instruction before returning to a user or a
guest.
On CPUs not affected by MDS and TAA, user application cannot sample data
from CPU fill buffers using MDS or TAA. A guest with MMIO access can
still use DRPW or SBDR to extract data architecturally. Mitigate it with
VERW instruction to clear fill buffers before VMENTER for MMIO capable
guests.
Add a kernel parameter mmio_stale_data={off|full|full,nosmt} to control
the mitigation.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Processor MMIO Stale Data mitigation uses similar mitigation as MDS and
TAA. In preparation for adding its mitigation, add a common function to
update all mitigations that depend on MD_CLEAR.
[ bp: Add a newline in md_clear_update_mitigation() to separate
statements better. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For more details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
Add the Processor MMIO Stale Data bug enumeration. A microcode update
adds new bits to the MSR IA32_ARCH_CAPABILITIES, define them.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
A PCMD (Paging Crypto MetaData) page contains the PCMD
structures of enclave pages that have been encrypted and
moved to the shmem backing store. When all enclave pages
sharing a PCMD page are loaded in the enclave, there is no
need for the PCMD page and it can be truncated from the
backing store.
A few issues appeared around the truncation of PCMD pages. The
known issues have been addressed but the PCMD handling code could
be made more robust by loudly complaining if any new issue appears
in this area.
Add a check that will complain with a warning if the PCMD page is not
actually empty after it has been truncated. There should never be data
in the PCMD page at this point since it is was just checked to be empty
and truncated with enclave mutex held and is updated with the
enclave mutex held.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Link: https://lkml.kernel.org/r/6495120fed43fafc1496d09dd23df922b9a32709.1652389823.git.reinette.chatre@intel.com
|
|
Haitao reported encountering a WARN triggered by the ENCLS[ELDU]
instruction faulting with a #GP.
The WARN is encountered when the reclaimer evicts a range of
pages from the enclave when the same pages are faulted back right away.
Consider two enclave pages (ENCLAVE_A and ENCLAVE_B)
sharing a PCMD page (PCMD_AB). ENCLAVE_A is in the
enclave memory and ENCLAVE_B is in the backing store. PCMD_AB contains
just one entry, that of ENCLAVE_B.
Scenario proceeds where ENCLAVE_A is being evicted from the enclave
while ENCLAVE_B is faulted in.
sgx_reclaim_pages() {
...
/*
* Reclaim ENCLAVE_A
*/
mutex_lock(&encl->lock);
/*
* Get a reference to ENCLAVE_A's
* shmem page where enclave page
* encrypted data will be stored
* as well as a reference to the
* enclave page's PCMD data page,
* PCMD_AB.
* Release mutex before writing
* any data to the shmem pages.
*/
sgx_encl_get_backing(...);
encl_page->desc |= SGX_ENCL_PAGE_BEING_RECLAIMED;
mutex_unlock(&encl->lock);
/*
* Fault ENCLAVE_B
*/
sgx_vma_fault() {
mutex_lock(&encl->lock);
/*
* Get reference to
* ENCLAVE_B's shmem page
* as well as PCMD_AB.
*/
sgx_encl_get_backing(...)
/*
* Load page back into
* enclave via ELDU.
*/
/*
* Release reference to
* ENCLAVE_B' shmem page and
* PCMD_AB.
*/
sgx_encl_put_backing(...);
/*
* PCMD_AB is found empty so
* it and ENCLAVE_B's shmem page
* are truncated.
*/
/* Truncate ENCLAVE_B backing page */
sgx_encl_truncate_backing_page();
/* Truncate PCMD_AB */
sgx_encl_truncate_backing_page();
mutex_unlock(&encl->lock);
...
}
mutex_lock(&encl->lock);
encl_page->desc &=
~SGX_ENCL_PAGE_BEING_RECLAIMED;
/*
* Write encrypted contents of
* ENCLAVE_A to ENCLAVE_A shmem
* page and its PCMD data to
* PCMD_AB.
*/
sgx_encl_put_backing(...)
/*
* Reference to PCMD_AB is
* dropped and it is truncated.
* ENCLAVE_A's PCMD data is lost.
*/
mutex_unlock(&encl->lock);
}
What happens next depends on whether it is ENCLAVE_A being faulted
in or ENCLAVE_B being evicted - but both end up with ENCLS[ELDU] faulting
with a #GP.
If ENCLAVE_A is faulted then at the time sgx_encl_get_backing() is called
a new PCMD page is allocated and providing the empty PCMD data for
ENCLAVE_A would cause ENCLS[ELDU] to #GP
If ENCLAVE_B is evicted first then a new PCMD_AB would be allocated by the
reclaimer but later when ENCLAVE_A is faulted the ENCLS[ELDU] instruction
would #GP during its checks of the PCMD value and the WARN would be
encountered.
Noting that the reclaimer sets SGX_ENCL_PAGE_BEING_RECLAIMED at the time
it obtains a reference to the backing store pages of an enclave page it
is in the process of reclaiming, fix the race by only truncating the PCMD
page after ensuring that no page sharing the PCMD page is in the process
of being reclaimed.
Cc: stable@vger.kernel.org
Fixes: 08999b2489b4 ("x86/sgx: Free backing memory after faulting the enclave page")
Reported-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Link: https://lkml.kernel.org/r/ed20a5db516aa813873268e125680041ae11dfcf.1652389823.git.reinette.chatre@intel.com
|
|
Haitao reported encountering a WARN triggered by the ENCLS[ELDU]
instruction faulting with a #GP.
The WARN is encountered when the reclaimer evicts a range of
pages from the enclave when the same pages are faulted back
right away.
The SGX backing storage is accessed on two paths: when there
are insufficient free pages in the EPC the reclaimer works
to move enclave pages to the backing storage and as enclaves
access pages that have been moved to the backing storage
they are retrieved from there as part of page fault handling.
An oversubscribed SGX system will often run the reclaimer and
page fault handler concurrently and needs to ensure that the
backing store is accessed safely between the reclaimer and
the page fault handler. This is not the case because the
reclaimer accesses the backing store without the enclave mutex
while the page fault handler accesses the backing store with
the enclave mutex.
Consider the scenario where a page is faulted while a page sharing
a PCMD page with the faulted page is being reclaimed. The
consequence is a race between the reclaimer and page fault
handler, the reclaimer attempting to access a PCMD at the
same time it is truncated by the page fault handler. This
could result in lost PCMD data. Data may still be
lost if the reclaimer wins the race, this is addressed in
the following patch.
The reclaimer accesses pages from the backing storage without
holding the enclave mutex and runs the risk of concurrently
accessing the backing storage with the page fault handler that
does access the backing storage with the enclave mutex held.
In the scenario below a PCMD page is truncated from the backing
store after all its pages have been loaded in to the enclave
at the same time the PCMD page is loaded from the backing store
when one of its pages are reclaimed:
sgx_reclaim_pages() { sgx_vma_fault() {
...
mutex_lock(&encl->lock);
...
__sgx_encl_eldu() {
...
if (pcmd_page_empty) {
/*
* EPC page being reclaimed /*
* shares a PCMD page with an * PCMD page truncated
* enclave page that is being * while requested from
* faulted in. * reclaimer.
*/ */
sgx_encl_get_backing() <----------> sgx_encl_truncate_backing_page()
}
mutex_unlock(&encl->lock);
} }
In this scenario there is a race between the reclaimer and the page fault
handler when the reclaimer attempts to get access to the same PCMD page
that is being truncated. This could result in the reclaimer writing to
the PCMD page that is then truncated, causing the PCMD data to be lost,
or in a new PCMD page being allocated. The lost PCMD data may still occur
after protecting the backing store access with the mutex - this is fixed
in the next patch. By ensuring the backing store is accessed with the mutex
held the enclave page state can be made accurate with the
SGX_ENCL_PAGE_BEING_RECLAIMED flag accurately reflecting that a page
is in the process of being reclaimed.
Consistently protect the reclaimer's backing store access with the
enclave's mutex to ensure that it can safely run concurrently with the
page fault handler.
Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Link: https://lkml.kernel.org/r/fa2e04c561a8555bfe1f4e7adc37d60efc77387b.1652389823.git.reinette.chatre@intel.com
|
|
Recent commit 08999b2489b4 ("x86/sgx: Free backing memory
after faulting the enclave page") expanded __sgx_encl_eldu()
to clear an enclave page's PCMD (Paging Crypto MetaData)
from the PCMD page in the backing store after the enclave
page is restored to the enclave.
Since the PCMD page in the backing store is modified the page
should be marked as dirty to ensure the modified data is retained.
Cc: stable@vger.kernel.org
Fixes: 08999b2489b4 ("x86/sgx: Free backing memory after faulting the enclave page")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Link: https://lkml.kernel.org/r/00cd2ac480db01058d112e347b32599c1a806bc4.1652389823.git.reinette.chatre@intel.com
|
|
SGX uses shmem backing storage to store encrypted enclave pages
and their crypto metadata when enclave pages are moved out of
enclave memory. Two shmem backing storage pages are associated with
each enclave page - one backing page to contain the encrypted
enclave page data and one backing page (shared by a few
enclave pages) to contain the crypto metadata used by the
processor to verify the enclave page when it is loaded back into
the enclave.
sgx_encl_put_backing() is used to release references to the
backing storage and, optionally, mark both backing store pages
as dirty.
Managing references and dirty status together in this way results
in both backing store pages marked as dirty, even if only one of
the backing store pages are changed.
Additionally, waiting until the page reference is dropped to set
the page dirty risks a race with the page fault handler that
may load outdated data into the enclave when a page is faulted
right after it is reclaimed.
Consider what happens if the reclaimer writes a page to the backing
store and the page is immediately faulted back, before the reclaimer
is able to set the dirty bit of the page:
sgx_reclaim_pages() { sgx_vma_fault() {
...
sgx_encl_get_backing();
... ...
sgx_reclaimer_write() {
mutex_lock(&encl->lock);
/* Write data to backing store */
mutex_unlock(&encl->lock);
}
mutex_lock(&encl->lock);
__sgx_encl_eldu() {
...
/*
* Enclave backing store
* page not released
* nor marked dirty -
* contents may not be
* up to date.
*/
sgx_encl_get_backing();
...
/*
* Enclave data restored
* from backing store
* and PCMD pages that
* are not up to date.
* ENCLS[ELDU] faults
* because of MAC or PCMD
* checking failure.
*/
sgx_encl_put_backing();
}
...
/* set page dirty */
sgx_encl_put_backing();
...
mutex_unlock(&encl->lock);
} }
Remove the option to sgx_encl_put_backing() to set the backing
pages as dirty and set the needed pages as dirty right after
receiving important data while enclave mutex is held. This ensures that
the page fault handler can get up to date data from a page and prepares
the code for a following change where only one of the backing pages
need to be marked as dirty.
Cc: stable@vger.kernel.org
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Link: https://lore.kernel.org/linux-sgx/8922e48f-6646-c7cc-6393-7c78dcf23d23@intel.com/
Link: https://lkml.kernel.org/r/fa9f98986923f43e72ef4c6702a50b2a0b3c42e3.1652389823.git.reinette.chatre@intel.com
|
|
The set_memory_uc() approach doesn't work well in all cases.
As Dan pointed out when "The VMM unmapped the bad page from
guest physical space and passed the machine check to the guest."
"The guest gets virtual #MC on an access to that page. When
the guest tries to do set_memory_uc() and instructs cpa_flush()
to do clean caches that results in taking another fault / exception
perhaps because the VMM unmapped the page from the guest."
Since the driver has special knowledge to handle NP or UC,
mark the poisoned page with NP and let driver handle it when
it comes down to repair.
Please refer to discussions here for more details.
https://lore.kernel.org/all/CAPcyv4hrXPb1tASBZUg-GgdVs0OOFKXMXLiHmktg_kFi7YBMyQ@mail.gmail.com/
Now since poisoned page is marked as not-present, in order to
avoid writing to a not-present page and trigger kernel Oops,
also fix pmem_do_write().
Fixes: 284ce4011ba6 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/165272615484.103830.2563950688772226611.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
IFS is a CPU feature that allows a binary blob, similar to microcode,
to be loaded and consumed to perform low level validation of CPU
circuitry. In fact, it carries the same Processor Signature
(family/model/stepping) details that are contained in Intel microcode
blobs.
In support of an IFS driver to trigger loading, validation, and running
of these tests blobs, make the functionality of cpu_signatures_match()
and collect_cpu_info_early() available outside of the microcode driver.
Add an "intel_" prefix and drop the "_early" suffix from
collect_cpu_info_early() and EXPORT_SYMBOL_GPL() it. Add
declaration to x86 <asm/cpu.h>
Make cpu_signatures_match() an inline function in x86 <asm/cpu.h>,
and also give it an "intel_" prefix.
No functional change intended.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220506225410.1652287-2-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In newer versions of Hyper-V, the x86/x64 PMU can be virtualized
into guest VMs by explicitly enabling it. Linux kernels are typically
built to automatically enable the hardlockup detector if the PMU is
found. To prevent the possibility of false positives due to the
vagaries of VM scheduling, disable the PMU-based hardlockup detector
by default in a VM on Hyper-V. The hardlockup detector can still be
enabled by overriding the default with the nmi_watchdog=1 option on
the kernel boot line or via sysctl at runtime.
This change mimics the approach taken with KVM guests in
commit 692297d8f968 ("watchdog: introduce the hardlockup_detector_disable()
function").
Linux on ARM64 does not provide a PMU-based hardlockup detector, so
there's no corresponding disable in the Hyper-V init code on ARM64.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652111063-6535-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Obtain the new INTEL_FAM6 stuff required.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled. A return
of 0 causes the boot option/value to be listed as an Unknown kernel
parameter and added to init's (limited) argument (no '=') or environment
(with '=') strings. So return 1 from these x86 __setup handlers.
Examples:
Unknown kernel command line parameters "apicpmtimer
BOOT_IMAGE=/boot/bzImage-517rc8 vdso=1 ring3mwait=disable", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
apicpmtimer
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc8
vdso=1
ring3mwait=disable
Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Fixes: 77b52b4c5c66 ("x86: add "debugpat" boot option")
Fixes: e16fd002afe2 ("x86/cpufeature: Enable RING3MWAIT for Knights Landing")
Fixes: b8ce33590687 ("x86_64: convert to clock events")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220314012725.26661-1-rdunlap@infradead.org
|
|
Raptor Lake supports the split lock detection feature. Add it to
the split_lock_cpu_ids[] array.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220427231059.293086-1-tony.luck@intel.com
|
|
CPUID leaf 0x80000022 i.e. ExtPerfMonAndDbg advertises some
new performance monitoring features for AMD processors.
Bit 0 of EAX indicates support for Performance Monitoring
Version 2 (PerfMonV2) features. If found to be set during
PMU initialization, the EBX bits of the same CPUID function
can be used to determine the number of available PMCs for
different PMU types. Additionally, Core PMCs can be managed
using new global control and status registers.
For better utilization of feature words, PerfMonV2 is added
as a scattered feature bit.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c70e497e22f18e7f05b025bb64ca21cc12b17792.1650515382.git.sandipan.das@amd.com
|
|
Due to the avoidance of IPIs to idle CPUs arch_freq_get_on_cpu() can return
0 when the last sample was too long ago.
show_cpuinfo() has a fallback to cpufreq_quick_get() and if that fails to
return cpu_khz, but the readout code for the per CPU scaling frequency in
sysfs does not.
Move that fallback into arch_freq_get_on_cpu() so the behaviour is the same
when reading /proc/cpuinfo and /sys/..../cur_scaling_freq.
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Doug Smythies <dsmythies@telus.net>
Link: https://lore.kernel.org/r/87pml5180p.ffs@tglx
|
|
Reading the current CPU frequency from /sys/..../scaling_cur_freq involves
in the worst case two IPIs due to the ad hoc sampling.
The frequency invariance infrastructure provides the APERF/MPERF samples
already. Utilize them and consolidate this with the /proc/cpuinfo readout.
The sample is considered valid for 20ms. So for idle or isolated NOHZ full
CPUs the function returns 0, which is matching the previous behaviour.
The resulting text size vs. the original APERF/MPERF plus the separate
frequency invariance code:
text: 2411 -> 723
init.text: 0 -> 767
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.934040006@linutronix.de
|
|
The frequency invariance infrastructure provides the APERF/MPERF samples
already. Utilize them for the cpu frequency display in /proc/cpuinfo.
The sample is considered valid for 20ms. So for idle or isolated NOHZ full
CPUs the function returns 0, which is matching the previous behaviour.
This gets rid of the mass IPIs and a delay of 20ms for stabilizing observed
by Eric when reading /proc/cpuinfo.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.875029458@linutronix.de
|
|
Now that the MSR readout is unconditional, store the results in the per CPU
data structure along with a jiffies timestamp for the CPU frequency readout
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.817702355@linutronix.de
|
|
The frequency invariance support is currently limited to x86/64 and SMP,
which is the vast majority of machines.
arch_scale_freq_tick() is called every tick on all CPUs and reads the APERF
and MPERF MSRs. The CPU frequency getters function do the same via dedicated
IPIs.
While it could be argued that on systems where frequency invariance support
is disabled (32bit, !SMP) the per tick read of the APERF and MPERF MSRs can
be avoided, it does not make sense to keep the extra code and the resulting
runtime issues of mass IPIs around.
As a first step split out the non frequency invariance specific
initialization code and the read MSR portion of arch_scale_freq_tick(). The
rest of the code is still conditional and guarded with a static key.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.761988704@linutronix.de
|
|
Preparation for sharing code with the CPU frequency portion of the
aperf/mperf code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.706185092@linutronix.de
|
|
Preparation for sharing code with the CPU frequency portion of the
aperf/mperf code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.648485667@linutronix.de
|
|
AMD boot CPU initialization happens late via ACPI/CPPC which prevents the
Intel parts from being marked __init.
Split out the common code and provide a dedicated interface for the AMD
initialization and mark the Intel specific code and data __init.
The remaining text size is almost cut in half:
text: 2614 -> 1350
init.text: 0 -> 786
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.592465719@linutronix.de
|
|
This code is convoluted and because it can be invoked post init via the
ACPI/CPPC code, all of the initialization functionality is built in instead
of being part of init text and init data.
As a first step create separate calls for the boot and the application
processors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.536733494@linutronix.de
|
|
as this can share code with the preexisting APERF/MPERF code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.478362457@linutronix.de
|
|
aperfmperf_get_khz() already excludes idle CPUs from APERF/MPERF sampling
and that's a reasonable decision. There is no point in sending up to two
IPIs to an idle CPU just because someone reads a sysfs file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.419880163@linutronix.de
|
|
Changes to the "warn" mode of split lock handling mean that TIF_SLD is
never set.
Remove the bit, and the functions that use it.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220310204854.31752-3-tony.luck@intel.com
|
|
In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas
said:
Its's simply wishful thinking that stuff gets fixed because of a
WARN_ONCE(). This has never worked. The only thing which works is to
make stuff fail hard or slow it down in a way which makes it annoying
enough to users to complain.
He was talking about WBINVD. But it made me think about how we use the
split lock detection feature in Linux.
Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process
keep running with split lock detection disabled
3) Kill process that use split locks
Option 2 falls into the "wishful thinking" territory that Thomas warns does
nothing. But option 3 might not be viable in a situation with legacy
applications that need to run.
Hence make option 2 much stricter to "slow it down in a way which makes
it annoying".
Primary reason for this change is to provide better quality of service to
the rest of the applications running on the system. Internal testing shows
that even with many processes splitting locks, performance for the rest of
the system is much more responsive.
The new "warn" mode operates like this. When an application tries to
execute a bus lock the #AC handler.
1) Delays (interruptibly) 10 ms before moving to next step.
2) Blocks (interruptibly) until it can get the semaphore
If interrupted, just return. Assume the signal will either
kill the task, or direct execution away from the instruction
that is trying to get the bus lock.
3) Disables split lock detection for the current core
4) Schedules a work queue to re-enable split lock detect in 2 jiffies
5) Returns
The work queue that re-enables split lock detection also releases the
semaphore.
There is a corner case where a CPU may be taken offline while split lock
detection is disabled. A CPU hotplug handler handles this case.
Old behaviour was to only print the split lock warning on the first
occurrence of a split lock from a task. Preserve that by adding a flag to
the task structure that suppresses subsequent split lock messages from that
task.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220310204854.31752-2-tony.luck@intel.com
|
|
When a machine error is graded as PANIC by the AMD grading logic, the
MCE handler calls mce_panic(). The notification chain does not come
into effect so the AMD EDAC driver does not decode the errors. In these
cases, the messages displayed to the user are more cryptic and miss
information that might be relevant, like the context in which the error
took place.
Add messages to the grading logic for machine errors so that it is clear
what error it was.
[ bp: Massage commit message. ]
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20220405183212.354606-3-carlos.bilbao@amd.com
|
|
The MCE handler needs to understand the severity of the machine errors to
act accordingly. Simplify the AMD grading logic following a logic that
closely resembles the descriptions of the public PPR documents. This will
help include more fine-grained grading of errors in the future.
[ bp: Touchups. ]
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20220405183212.354606-2-carlos.bilbao@amd.com
|
|
When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:
...
PM: Calling lapic_suspend+0x0/0x210
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
Call Trace:
<TASK>
? restore_processor_state
x86_acpi_suspend_lowlevel
acpi_suspend_enter
suspend_devices_and_enter
pm_suspend.cold
state_store
kobj_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
__x64_sys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
RIP: 0033:0x7fda13c260a7
To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.
[ Pawan: write commit message and productize it. ]
Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
|
|
Move enabling SWIOTLB_FORCE for guest memory encryption into common code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Read a record is cleared by others, but the deleted record cache entry is
still created by erst_get_record_id_next. When next enumerate the records,
get the cached deleted record, then erst_read() return -ENOENT and try to
get next record, loop back to first ID will return 0 in function
__erst_record_id_cache_add_one and then set record_id as
APEI_ERST_INVALID_RECORD_ID, finished this time read operation.
It will result in read the records just in the cache hereafter.
This patch cleared the deleted record cache, fix the issue that
"./erst-inject -p" shows record counts not equal to "./erst-inject -n".
A reproducer of the problem(retry many times):
[root@localhost erst-inject]# ./erst-inject -c 0xaaaaa00011
[root@localhost erst-inject]# ./erst-inject -p
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00012
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00013
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00014
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000006
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000007
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000008
[root@localhost erst-inject]# ./erst-inject -p
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00012
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00013
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00014
[root@localhost erst-inject]# ./erst-inject -n
total error record count: 6
Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
[*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557
[ bp: Drop unstable web link, massage heavily. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
|
|
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and
CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use
MSR_IA32_TSX_CTRL when supported.
[ bp: Document how and why TSX gets disabled. ]
Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
|
|
In some cases, x86 code calls cpumask_weight() to check if any bit of a
given cpumask is set.
This can be done more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220210224933.379149-17-yury.norov@gmail.com
|
|
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest uses a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
[ bp: Cleanup comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-18-brijesh.singh@amd.com
|
