| Age | Commit message (Collapse) | Author |
|---|
|
Enforce the MMIO State Data mitigation if KVM has ever mapped host MMIO
into the VM, not if the VM has an assigned device. VFIO is but one of
many ways to map host MMIO into a KVM guest, and even within VFIO,
formally attaching a device to a VM via KVM_DEV_VFIO_FILE_ADD is entirely
optional.
Track whether or not the guest can access host MMIO on a per-MMU basis,
i.e. based on whether or not the vCPU has a mapping to host MMIO. For
simplicity, track MMIO mappings in "special" rools (those without a
kvm_mmu_page) at the VM level, as only Intel CPUs are vulnerable, and so
only legacy 32-bit shadow paging is affected, i.e. lack of precise
tracking is a complete non-issue.
Make the per-MMU and per-VM flags sticky. Detecting when *all* MMIO
mappings have been removed would be absurdly complex. And in practice,
removing MMIO from a guest will be done by deleting the associated memslot,
which by default will force KVM to re-allocate all roots. Special roots
will forever be mitigated, but as above, the affected scenarios are not
expected to be performance sensitive.
Use a VMX_RUN flag to communicate the need for a buffers flush to
vmx_vcpu_enter_exit() so that kvm_vcpu_can_access_host_mmio() and all its
dependencies don't need to be marked __always_inline, e.g. so that KASAN
doesn't trigger a noinstr violation.
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Fixes: 8cb861e9e3c9 ("x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data")
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/r/20250523011756.3243624-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Make cpu_dirty_log_size (CPU's dirty log buffer size) a per-VM value and
set the per-VM cpu_dirty_log_size only for normal VMs when PML is enabled.
Do not set it for TDs.
Until now, cpu_dirty_log_size was a system-wide value that is used for
all VMs and is set to the PML buffer size when PML was enabled in VMX.
However, PML is not currently supported for TDs, though PML remains
available for normal VMs as long as the feature is supported by hardware
and enabled in VMX.
Making cpu_dirty_log_size a per-VM value allows it to be ther PML buffer
size for normal VMs and 0 for TDs. This allows functions like
kvm_arch_sync_dirty_log() and kvm_mmu_update_cpu_dirty_logging() to
determine if PML is supported, in order to kick off vCPUs or request them
to update CPU dirty logging status (turn on/off PML in VMCS).
This fixes an issue first reported in [1], where QEMU attaches an
emulated VGA device to a TD; note that KVM_MEM_LOG_DIRTY_PAGES
still works if the corresponding has no flag KVM_MEM_GUEST_MEMFD.
KVM then invokes kvm_mmu_update_cpu_dirty_logging() and from there
vmx_update_cpu_dirty_logging(), which incorrectly accesses a kvm_vmx
struct for a TDX VM.
Reported-by: ANAND NARSHINHA PATIL <Anand.N.Patil@ibm.com>
Reported-by: Pedro Principeza <pedro.principeza@canonical.com>
Reported-by: Farrah Chen <farrah.chen@intel.com>
Closes: https://github.com/canonical/tdx/issues/202
Link: https://github.com/canonical/tdx/issues/202 [1]
Suggested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a parameter "kvm" to kvm_mmu_page_ad_need_write_protect() and its
caller tdp_mmu_need_write_protect().
This is a preparation to make cpu_dirty_log_size a per-VM value rather than
a system-wide value.
No function changes expected.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As part of enabling TDX virtual machines, support support separation of
private/shared EPT into separate roots.
Confidential computing solutions almost invariably have concepts of
private and shared memory, but they may different a lot in the details.
In SEV, for example, the bit is handled more like a permission bit as
far as the page tables are concerned: the private/shared bit is not
included in the physical address.
For TDX, instead, the bit is more like a physical address bit, with
the host mapping private memory in one half of the address space and
shared in another. Furthermore, the two halves are mapped by different
EPT roots and only the shared half is managed by KVM; the private half
(also called Secure EPT in Intel documentation) gets managed by the
privileged TDX Module via SEAMCALLs.
As a result, the operations that actually change the private half of
the EPT are limited and relatively slow compared to reading a PTE. For
this reason the design for KVM is to keep a mirror of the private EPT in
host memory. This allows KVM to quickly walk the EPT and only perform the
slower private EPT operations when it needs to actually modify mid-level
private PTEs.
There are thus three sets of EPT page tables: external, mirror and
direct. In the case of TDX (the only user of this framework) the
first two cover private memory, whereas the third manages shared
memory:
external EPT - Hidden within the TDX module, modified via TDX module
calls.
mirror EPT - Bookkeeping tree used as an optimization by KVM, not
used by the processor.
direct EPT - Normal EPT that maps unencrypted shared memory.
Managed like the EPT of a normal VM.
Modifying external EPT
----------------------
Modifications to the mirrored page tables need to also perform the
same operations to the private page tables, which will be handled via
kvm_x86_ops. Although this prep series does not interact with the TDX
module at all to actually configure the private EPT, it does lay the
ground work for doing this.
In some ways updating the private EPT is as simple as plumbing PTE
modifications through to also call into the TDX module; however, the
locking is more complicated because inserting a single PTE cannot anymore
be done atomically with a single CMPXCHG. For this reason, the existing
FROZEN_SPTE mechanism is used whenever a call to the TDX module updates the
private EPT. FROZEN_SPTE acts basically as a spinlock on a PTE. Besides
protecting operation of KVM, it limits the set of cases in which the
TDX module will encounter contention on its own PTE locks.
Zapping external EPT
--------------------
While the framework tries to be relatively generic, and to be
understandable without knowing TDX much in detail, some requirements of
TDX sometimes leak; for example the private page tables also cannot be
zapped while the range has anything mapped, so the mirrored/private page
tables need to be protected from KVM operations that zap any non-leaf
PTEs, for example kvm_mmu_reset_context() or kvm_mmu_zap_all_fast().
For normal VMs, guest memory is zapped for several reasons: user
memory getting paged out by the guest, memslots getting deleted,
passthrough of devices with non-coherent DMA. Confidential computing
adds to these the conversion of memory between shared and privates. These
operations must not zap any private memory that is in use by the guest.
This is possible because the only zapping that is out of the control
of KVM/userspace is paging out userspace memory, which cannot apply to
guestmemfd operations. Thus a TDX VM will only zap private memory from
memslot deletion and from conversion between private and shared memory
which is triggered by the guest.
To avoid zapping too much memory, enums are introduced so that operations
can choose to target only private or shared memory, and thus only
direct or mirror EPT. For example:
Memslot deletion - Private and shared
MMU notifier based zapping - Shared only
Conversion to shared - Private only
Conversion to private - Shared only
Other cases of zapping will not be supported for KVM, for example
APICv update or non-coherent DMA status update; for the latter, TDX will
simply require that the CPU supports self-snoop and honor guest PAT
unconditionally for shared memory.
|
|
Return RET_PF* (excluding RET_PF_EMULATE/RET_PF_CONTINUE/RET_PF_INVALID)
instead of 1 in kvm_mmu_page_fault().
The callers of kvm_mmu_page_fault() are KVM page fault handlers (i.e.,
npf_interception(), handle_ept_misconfig(), __vmx_handle_ept_violation(),
kvm_handle_page_fault()). They either check if the return value is > 0 (as
in npf_interception()) or pass it further to vcpu_run() to decide whether
to break out of the kernel loop and return to the user when r <= 0.
Therefore, returning any positive value is equivalent to returning 1.
Warn if r == RET_PF_CONTINUE (which should not be a valid value) to ensure
a positive return value.
This is a preparation to allow TDX's EPT violation handler to check the
RET_PF* value and retry internally for RET_PF_RETRY.
No functional changes are intended.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20250113021138.18875-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Teach the MMU to map guest GFNs at a massaged position on the TDP, to aid
in implementing TDX shared memory.
Like other Coco technologies, TDX has the concept of private and shared
memory. For TDX the private and shared mappings are managed on separate
EPT roots. The private half is managed indirectly through calls into a
protected runtime environment called the TDX module, where the shared half
is managed within KVM in normal page tables.
For TDX, the shared half will be mapped in the higher alias, with a "shared
bit" set in the GPA. However, KVM will still manage it with the same
memslots as the private half. This means memslot looks ups and zapping
operations will be provided with a GFN without the shared bit set.
So KVM will either need to apply or strip the shared bit before mapping or
zapping the shared EPT. Having GFNs sometimes have the shared bit and
sometimes not would make the code confusing.
So instead arrange the code such that GFNs never have shared bit set.
Create a concept of "direct bits", that is stripped from the fault
address when setting fault->gfn, and applied within the TDP MMU iterator.
Calling code will behave as if it is operating on the PTE mapping the GFN
(without shared bits) but within the iterator, the actual mappings will be
shifted using bits specific for the root. SPs will have the GFN set
without the shared bit. In the end the TDP MMU will behave like it is
mapping things at the GFN without the shared bit but with a strange page
table format where everything is offset by the shared bit.
Since TDX only needs to shift the mapping like this for the shared bit,
which is mapped as the normal TDP root, add a "gfn_direct_bits" field to
the kvm_arch structure for each VM with a default value of 0. It will
have the bit set at the position of the GPA shared bit in GFN through TD
specific initialization code. Keep TDX specific concepts out of the MMU
code by not naming it "shared".
Ranged TLB flushes (i.e. flush_remote_tlbs_range()) target specific GFN
ranges. In convention established above, these would need to target the
shifted GFN range. It won't matter functionally, since the actual
implementation will always result in a full flush for the only planned
user (TDX). For correctness reasons, future changes can provide a TDX
x86_ops.flush_remote_tlbs_range implementation to return -EOPNOTSUPP and
force the full flush for TDs.
This leaves one problem. Some operations use a concept of max GFN (i.e.
kvm_mmu_max_gfn()), to iterate over the whole TDP range. When applying the
direct mask to the start of the range, the iterator would end up skipping
iterating over the range not covered by the direct mask bit. For safety,
make sure the __tdp_mmu_zap_root() operation iterates over the full GFN
range supported by the underlying TDP format. Add a new iterator helper,
for_each_tdp_pte_min_level_all(), that iterates the entire TDP GFN range,
regardless of root.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-9-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a "is_mirror" member to the kvm_mmu_page_role union to identify
SPTEs associated with the mirrored EPT.
The TDX module maintains the private half of the EPT mapped in the TD in
its protected memory. KVM keeps a copy of the private GPAs in a mirrored
EPT tree within host memory. This "is_mirror" attribute enables vCPUs to
find and get the root page of mirrored EPT from the MMU root list for a
guest TD. This also allows KVM MMU code to detect changes in mirrored EPT
according to the "is_mirror" mmu page role and propagate the changes to
the private EPT managed by TDX module.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-6-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add an external pointer to struct kvm_mmu_page for TDX's private page table
and add helper functions to allocate/initialize/free a private page table
page. TDX will only be supported with the TDP MMU. Because KVM TDP MMU
doesn't use unsync_children and write_flooding_count, pack them to have
room for a pointer and use a union to avoid memory overhead.
For private GPA, CPU refers to a private page table whose contents are
encrypted. The dedicated APIs to operate on it (e.g. updating/reading its
PTE entry) are used, and their cost is expensive.
When KVM resolves the KVM page fault, it walks the page tables. To reuse
the existing KVM MMU code and mitigate the heavy cost of directly walking
the private page table allocate two sets of page tables for the private
half of the GPA space.
For the page tables that KVM will walk, allocate them like normal and refer
to them as mirror page tables. Additionally allocate one more page for the
page tables the CPU will walk, and call them external page tables. Resolve
the KVM page fault with the existing code, and do additional operations
necessary for modifying the external page table in future patches.
The relationship of the types of page tables in this scheme is depicted
below:
KVM page fault |
| |
V |
-------------+---------- |
| | |
V V |
shared GPA private GPA |
| | |
V V |
shared PT root mirror PT root | private PT root
| | | |
V V | V
shared PT mirror PT --propagate--> external PT
| | | |
| \-----------------+------\ |
| | | |
V | V V
shared guest page | private guest page
|
non-encrypted memory | encrypted memory
|
PT - Page table
Shared PT - Visible to KVM, and the CPU uses it for shared mappings.
External PT - The CPU uses it, but it is invisible to KVM. TDX module
updates this table to map private guest pages.
Mirror PT - It is visible to KVM, but the CPU doesn't use it. KVM uses
it to propagate PT change to the actual private PT.
Add a helper kvm_has_mirrored_tdp() to trigger this behavior and wire it
to the TDX vm type.
Co-developed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20240718211230.1492011-5-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On a first glance it isn't obvious why calling kvm_tdp_page_fault() in
kvm_mmu_do_page_fault() is special cased, as the general case of using
an indirect case would result in calling of kvm_tdp_page_fault()
anyway.
Add a comment to explain the reason.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20241108161416.28552-1-jgross@suse.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the @max_level parameter from kvm_mmu_max_mapping_level(). All
callers pass in PG_LEVEL_NUM, so @max_level can be replaced with
PG_LEVEL_NUM in the function body.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240823235648.3236880-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Convert KVM x86 to use the recently introduced __kvm_faultin_pfn().
Opportunstically capture the refcounted_page grabbed by KVM for use in
future changes.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-45-seanjc@google.com>
|
|
Prefix x86's faultin_pfn helpers with "mmu" so that the mmu-less names can
be used by common KVM for similar APIs.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-38-seanjc@google.com>
|
|
Remove kvm_page_fault.hva as it is never read, only written. This will
allow removing the @hva param from __gfn_to_pfn_memslot().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-18-seanjc@google.com>
|
|
Invert the polarity of "can_unsync" and rename the parameter to
"synchronizing" to allow a future change to set the Accessed bit if KVM
is synchronizing an existing SPTE. Querying "can_unsync" in that case is
nonsensical, as the fact that KVM can't unsync SPTEs doesn't provide any
justification for setting the Accessed bit.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-7-seanjc@google.com>
|
|
KVM x86 MMU changes for 6.12:
- Overhaul the "unprotect and retry" logic to more precisely identify cases
where retrying is actually helpful, and to harden all retry paths against
putting the guest into an infinite retry loop.
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in
the shadow MMU.
- Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for
adding MGLRU support in KVM.
- Misc cleanups
|
|
Trigger KVM's various "unprotect gfn" paths if and only if the page fault
was a write to a write-protected gfn. To do so, add a new page fault
return code, RET_PF_WRITE_PROTECTED, to explicitly and precisely track
such page faults.
If a page fault requires emulation for any MMIO (or any reason besides
write-protection), trying to unprotect the gfn is pointless and risks
putting the vCPU into an infinite loop. E.g. KVM will put the vCPU into
an infinite loop if the vCPU manages to trigger MMIO on a page table walk.
Fixes: 147277540bbc ("kvm: svm: Add support for additional SVM NPF error codes")
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit 238adc77051a ("KVM: Cleanup LAPIC interface") removed
kvm_lapic_get_base() but leave declaration.
And other two declarations were never implenmented since introduction.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240830022537.2403873-1-yuehaibing@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The guest memory population logic will need to know what page size or level
(4K, 2M, ...) is mapped.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <eabc3f3e5eb03b370cadf6e1901ea34d7a020adc.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the accounting of the result of kvm_mmu_do_page_fault() to its
callers, as only pf_fixed is common to guest page faults and async #PFs,
and upcoming support KVM_PRE_FAULT_MEMORY won't bump _any_ stats.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Account stat.pf_taken in kvm_mmu_page_fault(), i.e. the actual page fault
handler, instead of conditionally bumping it in kvm_mmu_do_page_fault().
The "real" page fault handler is the only path that should ever increment
the number of taken page faults, as all other paths that "do page fault"
are by definition not handling faults that occurred in the guest.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly set "pfn" and "hva" to error values in kvm_mmu_do_page_fault()
to harden KVM against using "uninitialized" values. In quotes because the
fields are actually zero-initialized, and zero is a legal value for both
page frame numbers and virtual addresses. E.g. failure to set "pfn" prior
to creating an SPTE could result in KVM pointing at physical address '0',
which is far less desirable than KVM generating a SPTE with reserved PA
bits set and thus effectively killing the VM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240228024147.41573-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add and use a synthetic, KVM-defined page fault error code to indicate
whether a fault is to private vs. shared memory. TDX and SNP have
different mechanisms for reporting private vs. shared, and KVM's
software-protected VMs have no mechanism at all. Usurp an error code
flag to avoid having to plumb another parameter to kvm_mmu_page_fault()
and friends.
Alternatively, KVM could borrow AMD's PFERR_GUEST_ENC_MASK, i.e. set it
for TDX and software-protected VMs as appropriate, but that would require
*clearing* the flag for SEV and SEV-ES VMs, which support encrypted
memory at the hardware layer, but don't utilize private memory at the
KVM layer.
Opportunistically add a comment to call out that the logic for software-
protected VMs is (and was before this commit) broken for nested MMUs, i.e.
for nested TDP, as the GPA is an L2 GPA. Punt on trying to play nice with
nested MMUs as there is a _lot_ of functionality that simply doesn't work
for software-protected VMs, e.g. all of the paths where KVM accesses guest
memory need to be updated to be aware of private vs. shared memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20240228024147.41573-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Plumb the full 64-bit error code throughout the page fault handling code
so that KVM can use the upper 32 bits, e.g. SNP's PFERR_GUEST_ENC_MASK
will be used to determine whether or not a fault is private vs. shared.
Note, passing the 64-bit error code to FNAME(walk_addr)() does NOT change
the behavior of permission_fault() when invoked in the page fault path, as
KVM explicitly clears PFERR_IMPLICIT_ACCESS in kvm_mmu_page_fault().
Continue passing '0' from the async #PF worker, as guest_memfd and thus
private memory doesn't support async page faults.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[mdr: drop references/changes on rebase, update commit message]
Signed-off-by: Michael Roth <michael.roth@amd.com>
[sean: drop truncation in call to FNAME(walk_addr)(), rewrite changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240228024147.41573-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Exit to userspace with -EFAULT / KVM_EXIT_MEMORY_FAULT if a private fault
triggers emulation of any kind, as KVM doesn't currently support emulating
access to guest private memory. Practically speaking, private faults and
emulation are already mutually exclusive, but there are many flow that
can result in KVM returning RET_PF_EMULATE, and adding one last check
to harden against weird, unexpected combinations and/or KVM bugs is
inexpensive.
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240228024147.41573-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
dependent patches
Merge in pending alternatives patching infrastructure changes, before
applying more patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
|
|
Drop non-PA bits when getting GFN for guest's PGD with the maximum theoretical
mask for guest MAXPHYADDR.
Do it unconditionally because it's harmless for 32-bit guests, querying 64-bit
mode would be more expensive, and for EPT the mask isn't tied to guest mode.
Using PT_BASE_ADDR_MASK would be technically wrong (PAE paging has 64-bit
elements _except_ for CR3, which has only 32 valid bits), it wouldn't matter
in practice though.
Opportunistically use GENMASK_ULL() to define __PT_BASE_ADDR_MASK.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-6-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a new x86 VM type, KVM_X86_SW_PROTECTED_VM, to serve as a development
and testing vehicle for Confidential (CoCo) VMs, and potentially to even
become a "real" product in the distant future, e.g. a la pKVM.
The private memory support in KVM x86 is aimed at AMD's SEV-SNP and
Intel's TDX, but those technologies are extremely complex (understatement),
difficult to debug, don't support running as nested guests, and require
hardware that's isn't universally accessible. I.e. relying SEV-SNP or TDX
for maintaining guest private memory isn't a realistic option.
At the very least, KVM_X86_SW_PROTECTED_VM will enable a variety of
selftests for guest_memfd and private memory support without requiring
unique hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231027182217.3615211-24-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for resolving page faults on guest private memory for VMs
that differentiate between "shared" and "private" memory. For such VMs,
KVM_MEM_GUEST_MEMFD memslots can include both fd-based private memory and
hva-based shared memory, and KVM needs to map in the "correct" variant,
i.e. KVM needs to map the gfn shared/private as appropriate based on the
current state of the gfn's KVM_MEMORY_ATTRIBUTE_PRIVATE flag.
For AMD's SEV-SNP and Intel's TDX, the guest effectively gets to request
shared vs. private via a bit in the guest page tables, i.e. what the guest
wants may conflict with the current memory attributes. To support such
"implicit" conversion requests, exit to user with KVM_EXIT_MEMORY_FAULT
to forward the request to userspace. Add a new flag for memory faults,
KVM_MEMORY_EXIT_FLAG_PRIVATE, to communicate whether the guest wants to
map memory as shared vs. private.
Like KVM_MEMORY_ATTRIBUTE_PRIVATE, use bit 3 for flagging private memory
so that KVM can use bits 0-2 for capturing RWX behavior if/when userspace
needs such information, e.g. a likely user of KVM_EXIT_MEMORY_FAULT is to
exit on missing mappings when handling guest page fault VM-Exits. In
that case, userspace will want to know RWX information in order to
correctly/precisely resolve the fault.
Note, private memory *must* be backed by guest_memfd, i.e. shared mappings
always come from the host userspace page tables, and private mappings
always come from a guest_memfd instance.
Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Stop zapping invalidate TDP MMU roots via work queue now that KVM
preserves TDP MMU roots until they are explicitly invalidated. Zapping
roots asynchronously was effectively a workaround to avoid stalling a vCPU
for an extended during if a vCPU unloaded a root, which at the time
happened whenever the guest toggled CR0.WP (a frequent operation for some
guest kernels).
While a clever hack, zapping roots via an unbound worker had subtle,
unintended consequences on host scheduling, especially when zapping
multiple roots, e.g. as part of a memslot. Because the work of zapping a
root is no longer bound to the task that initiated the zap, things like
the CPU affinity and priority of the original task get lost. Losing the
affinity and priority can be especially problematic if unbound workqueues
aren't affined to a small number of CPUs, as zapping multiple roots can
cause KVM to heavily utilize the majority of CPUs in the system, *beyond*
the CPUs KVM is already using to run vCPUs.
When deleting a memslot via KVM_SET_USER_MEMORY_REGION, the async root
zap can result in KVM occupying all logical CPUs for ~8ms, and result in
high priority tasks not being scheduled in in a timely manner. In v5.15,
which doesn't preserve unloaded roots, the issues were even more noticeable
as KVM would zap roots more frequently and could occupy all CPUs for 50ms+.
Consuming all CPUs for an extended duration can lead to significant jitter
throughout the system, e.g. on ChromeOS with virtio-gpu, deleting memslots
is a semi-frequent operation as memslots are deleted and recreated with
different host virtual addresses to react to host GPU drivers allocating
and freeing GPU blobs. On ChromeOS, the jitter manifests as audio blips
during games due to the audio server's tasks not getting scheduled in
promptly, despite the tasks having a high realtime priority.
Deleting memslots isn't exactly a fast path and should be avoided when
possible, and ChromeOS is working towards utilizing MAP_FIXED to avoid the
memslot shenanigans, but KVM is squarely in the wrong. Not to mention
that removing the async zapping eliminates a non-trivial amount of
complexity.
Note, one of the subtle behaviors hidden behind the async zapping is that
KVM would zap invalidated roots only once (ignoring partial zaps from
things like mmu_notifier events). Preserve this behavior by adding a flag
to identify roots that are scheduled to be zapped versus roots that have
already been zapped but not yet freed.
Add a comment calling out why kvm_tdp_mmu_invalidate_all_roots() can
encounter invalid roots, as it's not at all obvious why zapping
invalidated roots shouldn't simply zap all invalid roots.
Reported-by: Pattara Teerapong <pteerapong@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Yiwei Zhang<zzyiwei@google.com>
Cc: Paul Hsia <paulhsia@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230916003916.2545000-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When attempting to allocate a shadow root for a !visible guest root gfn,
e.g. that resides in MMIO space, load a dummy root that is backed by the
zero page instead of immediately synthesizing a triple fault shutdown
(using the zero page ensures any attempt to translate memory will generate
a !PRESENT fault and thus VM-Exit).
Unless the vCPU is racing with memslot activity, KVM will inject a page
fault due to not finding a visible slot in FNAME(walk_addr_generic), i.e.
the end result is mostly same, but critically KVM will inject a fault only
*after* KVM runs the vCPU with the bogus root.
Waiting to inject a fault until after running the vCPU fixes a bug where
KVM would bail from nested VM-Enter if L1 tried to run L2 with TDP enabled
and a !visible root. Even though a bad root will *probably* lead to
shutdown, (a) it's not guaranteed and (b) the CPU won't read the
underlying memory until after VM-Enter succeeds. E.g. if L1 runs L2 with
a VMX preemption timer value of '0', then architecturally the preemption
timer VM-Exit is guaranteed to occur before the CPU executes any
instruction, i.e. before the CPU needs to translate a GPA to a HPA (so
long as there are no injected events with higher priority than the
preemption timer).
If KVM manages to get to FNAME(fetch) with a dummy root, e.g. because
userspace created a memslot between installing the dummy root and handling
the page fault, simply unload the MMU to allocate a new root and retry the
instruction. Use KVM_REQ_MMU_FREE_OBSOLETE_ROOTS to drop the root, as
invoking kvm_mmu_free_roots() while holding mmu_lock would deadlock, and
conceptually the dummy root has indeeed become obsolete. The only
difference versus existing usage of KVM_REQ_MMU_FREE_OBSOLETE_ROOTS is
that the root has become obsolete due to memslot *creation*, not memslot
deletion or movement.
Reported-by: Reima Ishii <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: Yu Zhang <yu.c.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20230729005200.1057358-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use BUILD_BUG_ON_INVALID() instead of an empty do-while loop to stub out
KVM_MMU_WARN_ON() when CONFIG_KVM_PROVE_MMU=n, that way _some_ build
issues with the usage of KVM_MMU_WARN_ON() will be dected even if the
kernel is using the stubs, e.g. basic syntax errors will be detected.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230729004722.1056172-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace MMU_DEBUG, which requires manually modifying KVM to enable the
macro, with a proper Kconfig, KVM_PROVE_MMU. Now that pgprintk() and
rmap_printk() are gone, i.e. the macro guards only KVM_MMU_WARN_ON() and
won't flood the kernel logs, enabling the option for debug kernels is both
desirable and feasible.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230729004722.1056172-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Convert all "runtime" assertions, i.e. assertions that can be triggered
while running vCPUs, from WARN_ON() to WARN_ON_ONCE(). Every WARN in the
MMU that is tied to running vCPUs, i.e. not contained to loading and
initializing KVM, is likely to fire _a lot_ when it does trigger. E.g. if
KVM ends up with a bug that causes a root to be invalidated before the
page fault handler is invoked, pretty much _every_ page fault VM-Exit
triggers the WARN.
If a WARN is triggered frequently, the resulting spam usually causes a lot
of damage of its own, e.g. consumes resources to log the WARN and pollutes
the kernel log, often to the point where other useful information can be
lost. In many case, the damage caused by the spam is actually worse than
the bug itself, e.g. KVM can almost always recover from an unexpectedly
invalid root.
On the flip side, warning every time is rarely helpful for debug and
triage, i.e. a single splat is usually sufficient to point a debugger in
the right direction, and automated testing, e.g. syzkaller, typically runs
with warn_on_panic=1, i.e. will never get past the first WARN anyways.
Lastly, when an assertions fails multiple times, the stack traces in KVM
are almost always identical, i.e. the full splat only needs to be captured
once. And _if_ there is value in captruing information about the failed
assert, a ratelimited printk() is sufficient and less likely to rack up a
large amount of collateral damage.
Link: https://lore.kernel.org/r/20230729004722.1056172-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename MMU_WARN_ON() to make it super obvious that the assertions are
all about KVM's MMU, not the primary MMU.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230729004722.1056172-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Delete KVM's "dbg" module param now that its usage in KVM is gone (it
used to guard pgprintk() and rmap_printk()).
Link: https://lore.kernel.org/r/20230729004722.1056172-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Delete rmap_printk() so that MMU_WARN_ON() and MMU_DEBUG can be morphed
into something that can be regularly enabled for debug kernels. The
information provided by rmap_printk() isn't all that useful now that the
rmap and unsync code is mature, as the prints are simultaneously too
verbose (_lots_ of message) and yet not verbose enough to be helpful for
debug (most instances print just the SPTE pointer/value, which is rarely
sufficient to root cause anything but trivial bugs).
Alternatively, rmap_printk() could be reworked to into tracepoints, but
it's not clear there is a real need as rmap bugs rarely escape initial
development, and when bugs do escape to production, they are often edge
cases and/or reside in code that isn't directly related to the rmaps.
In other words, the problems with rmap_printk() being unhelpful also apply
to tracepoints. And deleting rmap_printk() doesn't preclude adding
tracepoints in the future.
Link: https://lore.kernel.org/r/20230729004722.1056172-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Delete KVM's pgprintk() and all its usage, as the code is very prone
to bitrot due to being buried behind MMU_DEBUG, and the functionality has
been rendered almost entirely obsolete by the tracepoints KVM has gained
over the years. And for the situations where the information provided by
KVM's tracepoints is insufficient, pgprintk() rarely fills in the gaps,
and is almost always far too noisy, i.e. developers end up implementing
custom prints anyways.
Link: https://lore.kernel.org/r/20230729004722.1056172-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make kvm_flush_remote_tlbs_range() visible in common code and create a
default implementation that just invalidates the whole TLB.
This paves the way for several future features/cleanups:
- Introduction of range-based TLBI on ARM.
- Eliminating kvm_arch_flush_remote_tlbs_memslot()
- Moving the KVM/x86 TDP MMU to common code.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-6-rananta@google.com
|
|
Use gfn_t instead of u64 for kvm_flush_remote_tlbs_range()'s parameters,
since gfn_t is the standard type for GFNs throughout KVM.
Opportunistically rename pages to nr_pages to make its role even more
obvious.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20230126184025.2294823-6-dmatlack@google.com
[sean: convert pages to gfn_t too, and rename]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename kvm_flush_remote_tlbs_with_address() to
kvm_flush_remote_tlbs_range(). This name is shorter, which reduces the
number of callsites that need to be broken up across multiple lines, and
more readable since it conveys a range of memory is being flushed rather
than a single address.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20230126184025.2294823-5-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use a new EMULTYPE flag, EMULTYPE_WRITE_PF_TO_SP, to track page faults
on self-changing writes to shadowed page tables instead of propagating
that information to the emulator via a semi-persistent vCPU flag. Using
a flag in "struct kvm_vcpu_arch" is confusing, especially as implemented,
as it's not at all obvious that clearing the flag only when emulation
actually occurs is correct.
E.g. if KVM sets the flag and then retries the fault without ever getting
to the emulator, the flag will be left set for future calls into the
emulator. But because the flag is consumed if and only if both
EMULTYPE_PF and EMULTYPE_ALLOW_RETRY_PF are set, and because
EMULTYPE_ALLOW_RETRY_PF is deliberately not set for direct MMUs, emulated
MMIO, or while L2 is active, KVM avoids false positives on a stale flag
since FNAME(page_fault) is guaranteed to be run and refresh the flag
before it's ultimately consumed by the tail end of reexecute_instruction().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230202182817.407394-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When the spte of hupe page is dropped in kvm_set_pte_rmapp(), the whole
gfn range covered by the spte should be flushed. However,
rmap_walk_init_level() doesn't align down the gfn for new level like tdp
iterator does, then the gfn used in kvm_set_pte_rmapp() is not the base
gfn of huge page. And the size of gfn range is wrong too for huge page.
Use the base gfn of huge page and the size of huge page for flushing
tlbs for huge page. Also introduce a helper function to flush the given
page (huge or not) of guest memory, which would help prevent future
buggy use of kvm_flush_remote_tlbs_with_address() in such case.
Fixes: c3134ce240eed ("KVM: Replace old tlb flush function with new one to flush a specified range.")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/0ce24d7078fa5f1f8d64b0c59826c50f32f8065e.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rounding down the GFN to a huge page size is a common pattern throughout
KVM, so move round_gfn_for_level() helper in tdp_iter.c to
mmu_internal.h for common usage. Also rename it as gfn_round_for_level()
to use gfn_* prefix and clean up the other call sites.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/415c64782f27444898db650e21cf28eeb6441dfa.1665214747.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename __direct_map() to direct_map() since the leading underscores are
unnecessary. This also makes the page fault handler names more
consistent: kvm_tdp_mmu_page_fault() calls kvm_tdp_mmu_map() and
direct_page_fault() calls direct_map().
Opportunistically make some trivial cleanups to comments that had to be
modified anyway since they mentioned __direct_map(). Specifically, use
"()" when referring to functions, and include kvm_tdp_mmu_map() among
the various callers of disallowed_hugepage_adjust().
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the initialization of fault.{gfn,slot} earlier in the page fault
handling code for fully direct MMUs. This will enable a future commit to
split out TDP MMU page fault handling without needing to duplicate the
initialization of these 2 fields.
Opportunistically take advantage of the fact that fault.gfn is
initialized in kvm_tdp_page_fault() rather than recomputing it from
fault->addr.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Grab mmu_invalidate_seq in kvm_faultin_pfn() and stash it in struct
kvm_page_fault. The eliminates duplicate code and reduces the amount of
parameters needed for is_page_fault_stale().
Preemptively split out __kvm_faultin_pfn() to a separate function for
use in subsequent commits.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a helper to convert a SPTE to its shadow page to deduplicate a
variety of flows and hopefully avoid future bugs, e.g. if KVM attempts to
get the shadow page for a SPTE without dropping high bits.
Opportunistically add a comment in mmu_free_root_page() documenting why
it treats the root HPA as a SPTE.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221019165618.927057-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Set nx_huge_page_disallowed in TDP MMU shadow pages before making the SP
visible to other readers, i.e. before setting its SPTE. This will allow
KVM to query the flag when determining if a shadow page can be replaced
by a NX huge page without violating the rules of the mitigation.
Note, the shadow/legacy MMU holds mmu_lock for write, so it's impossible
for another CPU to see a shadow page without an up-to-date
nx_huge_page_disallowed, i.e. only the TDP MMU needs the complicated
dance.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <20221019165618.927057-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename most of the variables/functions involved in the NX huge page
mitigation to provide consistency, e.g. lpage vs huge page, and NX huge
vs huge NX, and also to provide clarity, e.g. to make it obvious the flag
applies only to the NX huge page mitigation, not to any condition that
prevents creating a huge page.
Add a comment explaining what the newly named "possible_nx_huge_pages"
tracks.
Leave the nx_lpage_splits stat alone as the name is ABI and thus set in
stone.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20221019165618.927057-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
