summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2021-02-15gpio: aggregator: Use compound literal from the headerAndy Shevchenko
Instead of doing it in place, convert GPIO_LOOKUP_IDX() and GPIO_HOG() to be compund literals that's allow to use them as rvalue in assignments. Due to above conversion, use compound literal from the header in the gpio-aggregator.c. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-15gpio: aggregator: Replace isrange() by using get_options()Andy Shevchenko
We already have a nice helper called get_options() which can be used to validate the input format. Replace isrange() by using it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-15gpio: merrifield: Make bias configuration available for GPIOsAndy Shevchenko
If we get bias set request, for example, from GpioIo() resource, we silently ignore it. Make bias configuration available for GPIOs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-02-15gpio: mvebu: add pwm support for Armada 8K/7KBaruch Siach
Use the marvell,pwm-offset DT property to store the location of PWM signal duration registers. Since we have more than two GPIO chips per system, we can't use the alias id to differentiate between them. Use the offset value for that. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Fix irq_set_affinityDmitry Osipenko
The irq_set_affinity callback should not be set if parent IRQ domain doesn't present because gpio-tegra driver callback fails in this case, causing a noisy error messages on system suspend: Disabling non-boot CPUs ... IRQ 26: no longer affine to CPU1 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). IRQ 27: no longer affine to CPU2 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). IRQ 28: no longer affine to CPU3 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). Entering suspend state LP1 Hence just don't specify the irq_set_affinity callback if parent PMC IRQ domain is missing. Tegra isn't capable of setting affinity per GPIO, affinity could be set only per GPIO bank, thus there is nothing to do for gpio-tegra in regards to CPU affinity without the parent IRQ domain. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Tested-by: Dmitry Osipenko <digetx@gmail.com> # A500 T20 and Nexus7 T30 Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Reported-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Support building driver as a loadable moduleDmitry Osipenko
Support building driver as a loadable kernel module. This allows to reduce size of a kernel zImage, which is important for some devices since size of kernel partition may be limited and since some bootloader variants have known problems in regards to the initrd placement if kernel image is too big. $ lsmod Module Size Used by gpio_tegra 16384 27 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Clean up whitespaces in tegra_gpio_driverDmitry Osipenko
Clean up inconsistent whitespaces and tabs in the definition of tegra_gpio_driver to make code look better a tad. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Use debugfs_create_devm_seqfile()Dmitry Osipenko
Use resource-managed variant of debugfs_create_file(0444) to prepare code for the modularization of the driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Improve formatting of the codeDmitry Osipenko
Don't cross 80 chars of line length in order to keep formatting of the code consistent. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: improve handling of pwm zero on/off valuesBaruch Siach
Hardware appears to treat zero value as 2^32. Take advantage of this fact to support on/off values of up to UINT_MAX+1 == 2^32. Adjust both .apply and .get_state to handle zero as a special case. Rounded up division result in .get_state can't be zero, since the dividend is now larger than 0. Remove check for this case. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Analyzed-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: don't limit pwm period/duty_cycle to UINT_MAXBaruch Siach
PWM on/off registers are limited to UINT_MAX. However the state period and duty_cycle fields are ns values of type u64. There is no reason to limit them to UINT_MAX. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: make pwm .get_state closer to idempotentBaruch Siach
Round up the divisions in .get_state() to make applying the read out configuration idempotent in most cases as .apply rounds down. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: improve pwm period calculation accuracyBaruch Siach
Change 'off' register value calculation from $off = (period - duty_cycle) * clkrate / NSEC_PER_SEC to $off = (period * clkrate / NSEC_PER_SEC) - $on That is, divide the full period value to reduce rounding error. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mockup: tweak the Kconfig help textBartosz Golaszewski
gpio-mockup doesn't require SYSFS to be selected so drop that bit from the Kconfig text. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-15gpio: wcove: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: vx855: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra186: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: max77620: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: remove zte zx driverArnd Bergmann
The zte zx platform is getting removed, so this driver is no longer needed. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Fix wake interruptDmitry Osipenko
The GPIO bank wake interrupt setting was erroneously removed after conversion to gpio_irq_chip, thus the wake interrupt programming is broken now. Secondly, the wake_enb of the GPIO driver should be changed only after the successful toggling of the IRQ wake-state. Restore the wake interrupt setting and the programming order. Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: pca953x: Add support for pca9506Uwe Kleine-König
According to the reference manual "The PCA9505 is identical to the PCA9506 except that it includes 100 kΩ internal pull-up resistors on all the I/Os." So the pca9506 device can be considered identical to the pca9505 for the gpio driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Add R-Car V3U (R8A779A0) supportGeert Uytterhoeven
Add support for the GPIO controller block in the R-Car V3U (R8A779A0) SoC, which is very similar to the block found on other R-Car Gen3 SoCs. However, this block has a new General Input Enable Register (INEN), whose reset state is to have all inputs disabled. Enable input for all available pins in probe and resume, to support the use of the General Input Register (INDT) for reading pin state at all times. This preserves backwards compatibility with other R-Car Gen3 SoCs, as recommended by the Hardware Manual. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Optimize GPIO pin state read on R-Car Gen3Geert Uytterhoeven
Currently, the R-Car GPIO driver treats R-Car Gen2 and R-Car Gen3 GPIO controllers the same. However, there exist small differences, like the behavior of the General Input Register (INDT): - On R-Car Gen1, R-Car Gen2, and RZ/G1, INDT only reflects the state of an input pin if the GPIO is configured for input, - On R-Car Gen3 and RZ/G2, INDT always reflects the state of the input pins. Hence to accommodate all variants, the driver does not use the INDT register to read the status of a GPIO line when configured for output, at the expense of doing 2 or 3 register reads instead of 1. Given register accesses are slow, change the .get() and .get_multiple() callbacks to always use INDT to read pin state on SoCs where this is supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: bd7xxxx: use helper variable for pdev->devBartosz Golaszewski
Using a helper local variable to store the address of &pdev->dev adds to readability and allows us to avoid unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
2021-02-15gpio: tegra: Convert to gpio_irq_chipThierry Reding
Convert the Tegra GPIO driver to use the gpio_irq_chip infrastructure. This allows a bit of boiler plate to be removed and while at it enables support for hierarchical domains, which is useful to support PMC wake events on Tegra210 and earlier. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: visconti: Add Toshiba Visconti GPIO supportNobuhiro Iwamatsu
Add the GPIO driver for Toshiba Visconti ARM SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: bd7xxxx: Do not depend on parent driver dataMatti Vaittinen
The ROHM BD70528 and BD71828 GPIO drivers only need the regmap pointer from parent. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: Kconfig: Update help description for GPIO_RCAR configLad Prabhakar
The gpio-rcar driver also supports RZ/G SoC's, update the description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: sl28cpld: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Remove redundant compatible valuesLad Prabhakar
The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been already added to all the respective R-Car Gen{1,2,3} SoC DTSI files, remove the redundant device specific values from the driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: fix spelling mistake in Kconfig "supprot" -> "support"Colin Ian King
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10gpio: ep93xx: Fix single irqchip with multi gpiochipsNikita Shubin
Fixes the following warnings which results in interrupts disabled on port B/F: gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver. - added separate irqchip for each interrupt capable gpiochip - provided unique names for each irqchip Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip") Cc: <stable@vger.kernel.org> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10gpio: ep93xx: fix BUG_ON port F usageNikita Shubin
Two index spaces and ep93xx_gpio_port are confusing. Instead add a separate struct to store necessary data and remove ep93xx_gpio_port. - add struct to store IRQ related data for each IRQ capable chip - replace offset array with defined offsets - add IRQ registers offset for each IRQ capable chip into ep93xx_gpio_banks ------------[ cut here ]------------ kernel BUG at drivers/gpio/gpio-ep93xx.c:64! ---[ end trace 3f6544e133e9f5ae ]--- Fixes: fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers") Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10gpio: mxs: GPIO_MXS should not default to y unconditionallyGeert Uytterhoeven
Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS, and ask the user in case of compile-testing. Fixes: 6876ca311bfca5d7 ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS") Cc: <stable@vger.kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-09gpiolib: Don't probe gpio_device if it's not the primary deviceSaravana Kannan
Dmitry reported[1] boot error messages caused by commit 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default"). gpio-1022 (cpu-pwr-req-hog): hogged as input max77620-pinctrl max77620-pinctrl: pin gpio4 already requested by max77620-pinctrl; cannot claim for gpiochip1 max77620-pinctrl max77620-pinctrl: pin-4 (gpiochip1) status -22 max77620-pinctrl max77620-pinctrl: could not request pin 4 (gpio4) from group gpio4 on device max77620-pinctrl gpio_stub_drv gpiochip1: Error applying setting, reverse things back gpio_stub_drv: probe of gpiochip1 failed with error -22 This happens because when we try to probe a device, driver core calls into pinctrl to set up the pins. However, if the GPIO DT node already has a proper device created and probed, trying to probe the gpio_device with a stub driver makes the pins be claimed twice. pinctrl doesn't like this and throws an error. So, this patch makes sure the gpio_stub_drv doesn't match with a gpio_device if it's not the primary device for the fwnode. [1] - https://lore.kernel.org/lkml/544ad0e4-0954-274c-8e77-866aaa5661a8@gmail.com/ Fixes: 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default") Tested-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210205020730.1746354-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-01gpio: gpiolib: remove shadowed variableWolfram Sang
After refactoring, we had two variables for the same thing. Remove the second declaration, one is enough here. Found by cppcheck. drivers/gpio/gpiolib.c:2551:17: warning: Local variable 'ret' shadows outer variable [shadowVariable] Fixes: d377f56f34f5 ("gpio: gpiolib: Normalize return code variable name") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-29gpiolib: free device name on error path to fix kmemleakQuanyang Wang
In gpiochip_add_data_with_key, we should check the return value of dev_set_name to ensure that device name is allocated successfully and then add a label on the error path to free device name to fix kmemleak as below: unreferenced object 0xc2d6fc40 (size 64): comm "kworker/0:1", pid 16, jiffies 4294937425 (age 65.120s) hex dump (first 32 bytes): 67 70 69 6f 63 68 69 70 30 00 1a c0 54 63 1a c0 gpiochip0...Tc.. 0c ed 84 c0 48 ed 84 c0 3c ee 84 c0 10 00 00 00 ....H...<....... backtrace: [<962810f7>] kobject_set_name_vargs+0x2c/0xa0 [<f50797e6>] dev_set_name+0x2c/0x5c [<94abbca9>] gpiochip_add_data_with_key+0xfc/0xce8 [<5c4193e0>] omap_gpio_probe+0x33c/0x68c [<3402f137>] platform_probe+0x58/0xb8 [<7421e210>] really_probe+0xec/0x3b4 [<000f8ada>] driver_probe_device+0x58/0xb4 [<67e0f7f7>] bus_for_each_drv+0x80/0xd0 [<4de545dc>] __device_attach+0xe8/0x15c [<2e4431e7>] bus_probe_device+0x84/0x8c [<c18b1de9>] device_add+0x384/0x7c0 [<5aff2995>] of_platform_device_create_pdata+0x8c/0xb8 [<061c3483>] of_platform_bus_create+0x198/0x230 [<5ee6d42a>] of_platform_populate+0x60/0xb8 [<2647300f>] sysc_probe+0xd18/0x135c [<3402f137>] platform_probe+0x58/0xb8 Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-28Merge tag 'v5.11-rc5' into i2c/for-5.12Wolfram Sang
Linux 5.11-rc5
2021-01-27gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by defaultSaravana Kannan
There are multiple instances of GPIO device tree nodes of the form: foo { compatible = "acme,foo"; ... gpio0: gpio0@xxxxxxxx { compatible = "acme,bar"; ... gpio-controller; }; gpio1: gpio1@xxxxxxxx { compatible = "acme,bar"; ... gpio-controller; }; ... } bazz { my-gpios = <&gpio0 ...>; } Case 1: The driver for "foo" populates struct device for these gpio* nodes and then probes them using a driver that binds with "acme,bar". This driver for "acme,bar" then registers the gpio* nodes with gpiolib. This lines up with how DT nodes with the "compatible" property are typically converted to struct devices and then registered with driver core to probe them. This also allows the gpio* devices to hook into all the driver core capabilities like runtime PM, probe deferral, suspend/resume ordering, device links, etc. Case 2: The driver for "foo" doesn't populate struct devices for these gpio* nodes before registering them with gpiolib. Instead it just loops through its child nodes and directly registers the gpio* nodes with gpiolib. Drivers that follow case 2 cause problems with fw_devlink=on. This is because fw_devlink will prevent bazz from probing until there's a struct device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO supplier). Once the struct device is available, fw_devlink will create a device link with gpio0 device as the supplier and bazz device as the consumer. After this point, since the gpio0 device will never bind to a driver, the device link will prevent bazz device from ever probing. Finding and refactoring all the instances of drivers that follow case 2 will cause a lot of code churn and it is not something that can be done in one shot. In some instances it might not even be possible to refactor them cleanly. Examples of such instances are [1] [2]. This patch works around this problem and avoids all the code churn by simply setting the fwnode of the gpio_device and creating a stub driver to bind to the gpio_device. This allows all the consumers to continue probing when the driver follows case 2. [1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/ [2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/ Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default") Cc: Marc Zyngier <maz@kernel.org> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210122193600.1415639-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27gpiolib: cdev: clear debounce period if line set to outputKent Gibson
When set_config changes a line from input to output debounce is implicitly disabled, as debounce makes no sense for outputs, but the debounce period is not being cleared and is still reported in the line info. So clear the debounce period when the debouncer is stopped in edge_detector_stop(). Fixes: 65cff7046406 ("gpiolib: cdev: support setting debounce") Cc: stable@vger.kernel.org Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-25gpio: msic: Remove driver for deprecated platformAndy Shevchenko
Intel Moorestown and Medfield are quite old Intel Atom based 32-bit platforms, which were in limited use in some Android phones, tablets and consumer electronics more than eight years ago. There are no bugs or problems ever reported outside from Intel for breaking any of that platforms for years. It seems no real users exists who run more or less fresh kernel on it. The commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align with this theory. Due to above and to reduce a burden of supporting outdated drivers we remove the support of outdated platforms completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-25gpio: intel-mid: Remove driver for deprecated platformAndy Shevchenko
Intel Moorestown and Medfield are quite old Intel Atom based 32-bit platforms, which were in limited use in some Android phones, tablets and consumer electronics more than eight years ago. There are no bugs or problems ever reported outside from Intel for breaking any of that platforms for years. It seems no real users exists who run more or less fresh kernel on it. The commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align with this theory. Due to above and to reduce a burden of supporting outdated drivers we remove the support of outdated platforms completely. Moreover this code duplicates gpio-pxa since the IP has been derived from XScale implementation. If anybody wants to resurrect this it has to be part of gpio-pxa.c. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-19gpio: tegra: Add missing dependenciesThierry Reding
Commit efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") moved the Tegra GPIO driver to the generic GPIO IRQ chip infrastructure and made the IRQ domain hierarchical, so the driver needs to pull in the support infrastructure via the GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY Kconfig options. Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-19gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on itRandy Dunlap
This is the only driver in the kernel source tree that depends on IRQ_DOMAIN_HIERARCHY instead of selecting it. Since it is not a visible Kconfig symbol, depending on it (expecting a user to set/enable it) doesn't make much sense, so change it to select instead of "depends on". Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Cc: Thierry Reding <treding@nvidia.com> Cc: Greentime Hu <greentime.hu@sifive.com> Cc: Yash Shah <yash.shah@sifive.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-19gpio: mvebu: fix pwm .get_state period calculationBaruch Siach
The period is the sum of on and off values. That is, calculate period as ($on + $off) / clkrate instead of $off / clkrate - $on / clkrate that makes no sense. Reported-by: Russell King <linux@armlinux.org.uk> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-19gpiolib: add a warning on gpiochip->to_irq definedNikita Shubin
gpiochip->to_irq method is redefined in gpiochip_add_irqchip. A lot of gpiod driver's still define ->to_irq method, let's give a gentle warning that they can no longer rely on it, so they can remove it on ocassion. Fixes: e0d8972898139 ("gpio: Implement tighter IRQ chip integration") Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-14gpio: bd9571mwv: Add BD9574MWF supportYoshihiro Shimoda
Add support for BD9574MWF which is similar chip with BD9571MWV. Note that BD9574MWF has additional features "RECOV_GPOUT", "FREQSEL" and "RTC_IN", but supports GPIO function only. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-01-14gpio: bd9571mwv: rid of using struct bd9571mwvYoshihiro Shimoda
To simplify this driver, use dev_get_regmap() and rid of using struct bd9571mwv. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-01-14gpio: bd9571mwv: Use the SPDX license identifierYoshihiro Shimoda
Use the SPDX license identifier instead of a local description. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-01-05gpiolib: Follow usual pattern for gpiod_remove_lookup_table() callAndy Shevchenko
The usual pattern for the remove calls, like gpiod_remove_lookup_table(), is to be NULL-aware, i.o.w. become a no-op whenever parameter is NULL. Update gpiod_remove_lookup_table() call to follow this pattern. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 13:59:07 +0000