| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
|
|
A few drivers that use the legacy GPIOLIB interfaces can be enabled
even when GPIOLIB is disabled entirely. With my previous patch this
now causes build failures like:
drivers/nfc/s3fwrn5/uart.c: In function 's3fwrn82_uart_parse_dt':
drivers/nfc/s3fwrn5/uart.c:100:14: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
These did not show up in my randconfig tests because randconfig almost
always has GPIOLIB selected by some other driver, and I did most
of the testing with follow-up patches that address the failures
properly.
Move the symbol outside of the 'if CONFIG_GPIOLIB' block for the moment
to avoid the build failures. It can be moved back and turned off by
default once all the driver specific changes are merged.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507261934.yIHeUuEQ-lkp@intel.com/
Fixes: 678bae2eaa81 ("gpiolib: make legacy interfaces optional")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250726211053.2226857-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Quote from the virtio specification chapter 4.2.2.2:
"For the device-specific configuration space, the driver MUST use 8 bit
wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses
for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and
64 bit wide fields."
Signed-off-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Fixes: 3a29355a22c0 ("gpio: Add virtio-gpio driver")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250724143718.5442-2-harald.mommer@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The traditional interfaces are only used on a small number of ancient
boards. Make these optional now so they can be disabled by default.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250722153634.3683927-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, Power and SoC due for the v6.17 merge window
|
|
Commit 08a149c40bdb ("gpiolib: Clean up headers") added a forward
declaration for struct device.
Later, commit 07445ae1c263 ("gpiolib: of: change of_find_gpio() to
accept device node") changed the function signature to accept a struct
device_node instead of a struct device.
Replace forward declaration of struct device with struct device_node to
match the updated function signature.
Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Link: https://lore.kernel.org/r/20250721155737.261990-1-andrey.lalaev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This driver implements the GPIO service on top of the SMC framework
on Apple Mac machines. In particular, these are the GPIOs present in the
PMU IC which are used to control power to certain on-board devices.
Although the underlying hardware supports various pin config settings
(input/output, open drain, etc.), this driver does not implement that
functionality and leaves it up to the firmware to configure things
properly. We also don't yet support interrupts/events. This is
sufficient for device power control, which is the only thing we need to
support at this point. More features will be implemented when needed.
To our knowledge, only Apple Silicon Macs implement this SMC feature.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-6-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The header files linux/gpio/driver.h is included twice in gpio-cadence.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22931
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250723064608.2178024-1-yang.lee@linux.alibaba.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support for the TI TPS65214 PMIC with the addition of an id_table,
separate TPS65214 template_chip, and device-specific _change_direction
functions.
- Use platform_get_device_id() to assign dev-specific information.
- Use different change_direction() functions since TPS65214's GPIO
configuration bits are changeable during device operation through bit
GPIO_CONFIG in GENERAL_CONFIG register.
- Remove MODULE_ALIAS since it is now generated by MODULE_DEVICE_TABLE.
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250722181609.1541739-3-s-ramamoorthy@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
TPS65215 and TPS65219 are overlapping PMIC devices. While their regulator
features differe, the GPIO features are the same. In the TPS65219 MFD
driver, the 2 PMICs share the same "tps65219-gpio" compatible string to
limit support for TPS65215 in this GPIO driver to comments.
The TPS6521X_GPIO0_IDX and TPS6521X_GPIO0_OFFSET macro name prefixes are
updated to indicate these macros apply to both PMICs.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250722181609.1541739-2-s-ramamoorthy@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The test for "if (!desc_data)" does not work correctly because the list
iterator in a list_for_each_entry() loop is always non-NULL. If we don't
exit via a break, then it points to invalid memory. Instead, use a tmp
variable for the list iterator and only set the "desc_data" when we have
found a match.
Fixes: 1cd53df733c2 ("gpio: sysfs: don't look up exported lines as class devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/747545bf-05f0-4f89-ba77-cb96bf9041f1@sabinyo.mountain
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The patch converting the driver to using new GPIO line value setters
only converted the set() callback and missed set_multiple(). Fix it now.
Fixes: 1919ea19a4ff ("gpio: xilinx: use new GPIO line value setter callbacks")
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20250717131116.53878-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
devm_gpiod_put_array() is meant to undo the effects of
devm_gpiod_get_array() - in particular, it should release the GPIOs
contained in the array acquired with the latter. It is meant to be the
resource-managed version of gpiod_put_array(), and it should behave
similar to the non-array version devm_gpiod_put().
Since commit d1d52c6622a6 ("gpiolib: devres: Finish the conversion to
use devm_add_action()") it doesn't do that anymore, it just removes the
devres action and frees associated memory, but it doesn't actually
release the GPIOs.
Fix by switching from devm_remove_action() to devm_release_action(),
which will in addition invoke the action to release the GPIOs.
Fixes: d1d52c6622a6 ("gpiolib: devres: Finish the conversion to use devm_add_action()")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reported-by: Wattson CI <wattson-external@google.com>
Reported-by: Samuel Wu <wusamuel@google.com>
Link: https://lore.kernel.org/r/20250715-gpiolib-devres-put-array-fix-v1-1-970d82a8c887@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add the interrupt enable register offset (inten_offset) so that GPIO
interrupts can be enabled normally on more models.
According to the latest interface specifications, the definition of GPIO
interrupts in ACPI is similar to that in FDT. The GPIO interrupts are
listed one by one according to the GPIO number, and the corresponding
interrupt number can be obtained directly through the GPIO number
specified by the consumer.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250714064542.2276247-1-zhoubinbin@loongson.cn
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Unlock before returning if vprbrd_gpiob_setdir() fails.
Fixes: 55e2d1eec110 ("gpio: viperboard: use new GPIO line value setter callbacks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9e72018c-e46e-4e55-83e4-503da4d022fc@sabinyo.mountain
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Remove the completed task tracking the rework of the sysfs interface and
add a new task to track the removal of the legacy bits and pieces.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-10-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add a Kconfig switch allowing to disable the legacy parts of the GPIO
sysfs interface. This means that even though we keep the
/sys/class/gpio/ directory, it no longer contains the global
export/unexport attribute pair (instead, the user should use the
per-chip export/unpexport) nor the gpiochip$BASE entries. This option
default to y if GPIO sysfs is enabled but we'll default it to n at some
point in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-9-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As a way to allow the user-space to stop referring to GPIOs by their
global numbers, introduce a parallel group of line attributes for
exported GPIO that live inside the GPIO chip class device and are
referred to by their HW offset within their parent chip.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-8-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation for adding a parallel, per-chip attribute group for
exported GPIO lines, stop using class device APIs to refer to it in the
code. When unregistering the chip, don't call class_find_device() but
instead store exported lines in a linked list inside the GPIO chip data
object and look it up there.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-7-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Currently each exported GPIO is represented in sysfs as a separate class
device. This allows us to simply use dev_get_drvdata() to retrieve the
pointer passed to device_create_with_groups() from sysfs ops callbacks.
However, we're preparing to add a parallel set of per-line sysfs
attributes that will live inside the associated gpiochip group. They are
not registered as class devices and so have the parent device passed as
argument to their callbacks (the GPIO chip class device).
Put the attribute structs inside the GPIO descriptor data and
dereference the relevant ones using container_of() in the callbacks.
This way, we'll be able to reuse the same code for both the legacy and
new GPIO attributes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-6-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation for future commits which will make use of descriptor AND
GPIO-device data in the same functions rename the former from data to
desc_data separately which will make future changes smaller and easier
to read.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-5-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We don't use any fields from struct device in gpio_sysfs_request_irq(),
gpio_sysfs_free_irq() and gpio_sysfs_set_active_low(). We only use the
dev argument to get the associated struct gpiod_data pointer with
dev_get_drvdata().
To make the transition to not using dev_get_drvdata() across line
callbacks for sysfs attributes easier, pass gpiod_data directly to
these functions instead of having it wrapped in struct device.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-4-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There's no reason to retrieve the reference to the sysfs dirent every
time we request an interrupt, we can as well only do it once when
exporting the GPIO.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-3-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In order to enable moving away from the global GPIO numberspace-based
exporting of lines over sysfs: add a parallel, per-chip entry under
/sys/class/gpio/ for every registered GPIO chip, denoted by device ID
in the file name and not its base GPIO number.
Compared to the existing chip group: it does not contain the "base"
attribute as the goal of this change is to not refer to GPIOs by their
global number from user-space anymore. It also contains its own,
per-chip export/unexport attribute pair which allow to export lines by
their hardware offset within the chip.
Caveat #1: the new device cannot be a link to (or be linked to by) the
existing "gpiochip<BASE>" entry as we cannot create links in
/sys/class/xyz/.
Caveat #2: the new entry cannot be named "gpiochipX" as it could
conflict with devices whose base is statically defined to a low number.
Let's go with "chipX" instead.
While at it: the chip label is unique so update the untrue statement
when extending the docs.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-2-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We have a dedicated comparator for GPIO descriptors that performs
additional checks and hides the implementation detail of whether the
same GPIO can be associated with two separate struct gpio_desc objects.
Use it in sysfs code
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-1-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250715-gpiochip-set-rv-gpio-remaining-v2-2-072b4cf06330@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Replace the if-else with a direct call to the regmap_assign_bits()
helper and save a couple lines of code.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250715-gpiochip-set-rv-gpio-remaining-v2-1-072b4cf06330@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Using regmap_update_bits() allows to reduce the number of I2C transfers
when updating bits that haven't changed on non-volatile registers.
For example on a PCAL6416, when changing a GPIO direction from input to
output, the number of I2C transfers can be reduced from 4 to just 1 if
the pull resistors configuration hasn't changed and the output value
is the same as before.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250714133730.6353-1-hugo@hugovil.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio for v6.16-2
* Add a quirk for Acer Nitro V15 against wakeup capability
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Add a quirk for Acer Nitro V15
|
|
It's ok to not do anything specific when setting direction but the
callback should still respect the line value the user requests.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-19-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-18-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-17-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-16-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-15-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO core deals just fine with input-only controllers not implementing
the .set() callback. Remove the unneeded dummy implementation.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-14-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-13-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-12-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO core already makes sure that offsets higher than the number of GPIOs
are never passed to controller callbacks. We can remove the unnecessary
check.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-11-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-10-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-9-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-8-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-7-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-6-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-5-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-3-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
regmap_update_bits() can fail so check its return value in
wcd_gpio_direction_output() for consistency with the rest of the code
and propagate any errors.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-2-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250709-gpiochip-set-rv-gpio-remaining-v1-1-b8950f69618d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250707-gpiochip-set-rv-gpio-round4-v1-12-35668aaaf6d2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250707-gpiochip-set-rv-gpio-round4-v1-11-35668aaaf6d2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250707-gpiochip-set-rv-gpio-round4-v1-10-35668aaaf6d2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
