summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2020-12-05gpio: msc313: MStar MSC313 GPIO driverDaniel Palmer
This adds a driver that supports the GPIO block found in MStar/SigmaStar ARMv7 SoCs. The controller seems to have enough register for 128 lines but where they are wired up differs between chips and no currently known chip uses anywhere near 128 lines so there needs to be some per-chip data to collect together what lines actually have physical pins attached and map the right names to them. The core peripherals seem to use the same lines on the currently known chips but the lines used for the sensor interface, lcd controller etc pins seem to be totally different between the infinity and mercury chips The code tries to collect all of the re-usable names, offsets etc together so that it's easy to build the extra per-chip data for other chips in the future. So far this only supports the MSC313 and MSC313E chips. Support for the SSC8336N (mercury5) is trivial to add once all of the lines have been mapped out. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201129110803.2461700-4-daniel@0x0f.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04gpio: mxs: Remove unused .id_table supportFabio Estevam
mxs is a devicetree-only platform and hence it does not make use of the id_table mechanism. Get rid of the .id_table as it is unused. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201118191938.32693-1-festevam@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04gpio: tegra186: Set affinity callback to parentLinus Walleij
This assigns the .irq_set_affinity to the parent callback. I assume the Tegra186 is an SMP system so this would be beneficial. I used the pattern making the hirerarchy tolerant for missing parent as in Marc's earlier patch. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com> Link: https://lore.kernel.org/r/20201117213351.249668-2-linus.walleij@linaro.org
2020-12-04gpio: sifive: Set affinity callback to parentLinus Walleij
This assigns the .irq_set_affinity to the parent callback. I assume the sifive GPIO can be used in systems with SMP. I used the pattern making the hirerarchy tolerant for missing parent as in Marc's earlier patches. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Yash Shah <yash.shah@sifive.com> Cc: Wesley W. Terpstra <wesley@sifive.com> Link: https://lore.kernel.org/r/20201117213351.249668-1-linus.walleij@linaro.org
2020-12-04gpio: sysfs: Enforce character deviceLinus Walleij
If users select sysfs support they get the character device as well so that end-users cannot complain that they "only have sysfs on my system". They should have the character device at all times. If someone is in so dire need of stripping out the character device while still enabling the sysfs ABI they can very well patch the kernel. Also only show this obsolete option to expert users. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201110142724.14760-1-linus.walleij@linaro.org
2020-12-02gpio: mvebu: switch pwm duration registers to regmapBaruch Siach
Commit 2233bf7a92e ("gpio: mvebu: switch to regmap for register access") changed most readl/writel registers access calls to the regmap API in preparation for Armada 7K/8K support. PWM duration registers were left using readl/writel, as the driver does not support PWM for Armada 7K/8K. Switch PWM duration registers to regmap as first step in adding Armada 7K/8K PWM functionality support. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02gpio: mvebu: update Armada XP per-CPU commentBaruch Siach
Commit 2233bf7a92e ("gpio: mvebu: switch to regmap for register access") introduced percpu_regs to replace percpu_membase. Update the comment to match. Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Fixes: 2233bf7a92e7 ("gpio: mvebu: switch to regmap for register access") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02gpio: mvebu: fix potential user-after-free on probeBaruch Siach
When mvebu_pwm_probe() fails IRQ domain is not released. Move pwm probe before IRQ domain allocation. Add pwm cleanup code to the failure path. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02gpio: zynq: fix reference leak in zynq_gpio functionsQinglang Miao
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in a reference leak here. A new function pm_runtime_resume_and_get is introduced in [0] to keep usage counter balanced. So We fix the reference leak by replacing it with new funtion. [0] dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Fixes: c2df3de0d07e ("gpio: zynq: properly support runtime PM for GPIO used as interrupts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02gpiolib: Don't free if pin ranges are not definedEdmond Chung
A similar check was added in gpiochip_generic_request, but not in free. This has caused an imbalance count of request vs. free calls to the pinctrl driver. This patch is targeted to fix that issue. Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") Signed-off-by: Edmond Chung <edmondchung@google.com> Signed-off-by: Andrew Chant <achant@google.com> Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02gpio: dwapb: fix NULL pointer dereference at dwapb_gpio_suspend()Luo Jiaxing
Following Calltrace is found when running echo freeze > /sys/power/state. [ 272.755506] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 272.755585] Call trace: [ 272.755587] dwapb_gpio_suspend+0x18/0x318 [ 272.755588] pm_generic_suspend+0x2c/0x48 [ 272.755595] acpi_subsys_suspend+0x60/0x70 [ 272.755599] dpm_run_callback.isra.18+0x40/0xe0 [ 272.755601] __device_suspend+0xf4/0x360 The reason is platform_set_drvdata() is deleted, and dwapb_gpio_suspend() get *gpio by dev_get_drvdata(). Fixes: feeaefd378ca ("gpio: dwapb: Use resource managed GPIO-chip add data method") Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02gpio: arizona: disable pm_runtime in case of failureZheng Liang
pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced. Fixes:27a49ed17e224(gpio: arizona: Add support for GPIOs that) Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Liang <zhengliang6@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01gpiolib: do not print err message for EPROBE_DEFERGrygorii Strashko
The gpiochip may have dependencies from pinmux and so got deferred. Now it will print error message every time -EPROBE_DEFER is returned which is unnecessary: "gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517" Hence, do suppress error message for -EPROBE_DEFER case. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01gpio: ath79: Fix fall-through warning for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a fallthrough pseudo-keyword to indicate that the code is intended to fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01gpiolib: acpi: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30gpio: omap: handle deferred probe with dev_err_probe() for gpiochip_add_data()Grygorii Strashko
The gpiochip_add_data() may return -EPROBE_DEFER which is not handled properly by TI GPIO driver and causes unnecessary boot log messages. Hence, add proper deferred probe handling with new dev_err_probe() API. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30gpio: xra1403: remove unneeded spi_set_drvdata()Alexandru Ardelean
There is no matching spi_get_drvdata() call in the driver, so there is no need to do spi_set_drvdata(). This looks like it probably was copied from a driver that used both spi_set_drvdata() & spi_get_drvdata(). Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30gpio: dwapb: Remove unnecessary error messageDamien Le Moal
In dwapb_get_reset(), if devm_reset_control_get_optional_shared() fails, an error message is printed even if the failure is the benign EPROBE_DEFER error due to the reset controller not yet being initialized. Use dev_err_probe() to handle devm_reset_control_get_optional_shared() errors to avoid unnecessarilly printing an error message for the deferred probe error. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-25gpio: exar: use devm action for freeing the IDA and drop remove()Bartosz Golaszewski
We can simplify the error path in probe() and drop remove() entirely if we provide a devm action for freeing the device ID. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: switch to using regmapBartosz Golaszewski
We can simplify the code in gpio-exar by using regmap. This allows us to drop the mutex (regmap provides its own locking) and we can also reuse regmap's bit operations instead of implementing our own update function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: unduplicate address and offset computationBartosz Golaszewski
Provide and use helpers for calculating the register address and bit offset instead of hand coding it in every function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: use a helper variable for &pdev->devBartosz Golaszewski
It's more elegant to use a helper local variable to store the address of the underlying struct device than to dereference pdev everywhere. It also has the benefit of avoiding unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: switch to a simpler IDA interfaceBartosz Golaszewski
We don't need to specify any ranges when allocating IDs so we can switch to ida_alloc() and ida_free() instead of the ida_simple_ counterparts. ida_simple_get(ida, 0, 0, gfp) is equivalent to ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID larger than INT_MAX. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: include idr.hBartosz Golaszewski
This driver uses IDA APIs but doesn't include the relevant header. This fixes it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25gpio: exar: add a newline after the copyright noticeBartosz Golaszewski
It's customary to have a newline between the copyright header and the includes. Add one to gpio-exar. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-19gpio: tps65910: use regmap accessorsMichał Mirosław
Use regmap accessors directly for register manipulation - removing one layer of abstraction. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-18gpio: sifive: To get gpio irq offset from device tree dataGreentime Hu
We can get hwirq number of the gpio by its irq_data->hwirq so that we don't need to add more macros for different platforms. This patch is tested in SiFive Unleashed board and SiFive Unmatched board. Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-18gpio: mxc: Convert the driver to DT-onlyFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18gpio: gpio-xilinx: Check return value of of_property_read_u32Srinivas Neeli
In two different instances the return value of "of_property_read_u32" API was neither captured nor checked. Fixed it by capturing the return value and then checking for any error. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Addresses-Coverity: "check_return" Link: https://lore.kernel.org/r/1605201148-4508-9-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18gpio: gpio-xilinx: Add remove functionSrinivas Neeli
Added remove function support. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1605201148-4508-7-git-send-email-srinivas.neeli@xilinx.com [dropped pm disable call] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18gpio: gpio-xilinx: Add clock supportSrinivas Neeli
Adds clock support to the Xilinx GPIO driver. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1605201148-4508-4-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18gpio: gpio-xilinx: Arrange headers in sorting orderSrinivas Neeli
Arrange header files in sorted order. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1605201148-4508-2-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-16gpiolib: acpi: Use BIT() macro to increase readabilityAndy Shevchenko
We may use BIT() macro to increase readability in acpi_gpio_adr_space_handler(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Convert pin_index to be u16Andy Shevchenko
As specified by ACPI the pin index is 16-bit unsigned integer. Define the variable, which holds it, accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Extract acpi_request_own_gpiod() helperAndy Shevchenko
It appears that we are using similar code excerpts for ACPI OpRegion and event handling. Deduplicate those excerpts by extracting a new acpi_request_own_gpiod() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt()Andy Shevchenko
GpioInt() implies input configuration of the pin. Add this to the acpi_gpio_to_gpiod_flags() and make usable for GpioInt(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Set initial value for output pin based on bias and polarityVasile-Laurentiu Stanimir
GpioIo() resources don't contain an initial value for the output pin. Therefore instead of deducting its value solely based on bias field we should deduce that value from the polarity and the bias fields. Typical scenario is, when pin is defined in the table and its polarity, specified in _DSD or via platform code, is defined as active low, in the following call chain: -> acpi_populate_gpio_lookup() -> acpi_gpio_to_gpiod_flags() it will return GPIOD_OUT_HIGH if bias is set no matter if polarity is GPIO_ACTIVE_LOW, so it will return the current level instead of the logical level. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Move acpi_gpio_to_gpiod_flags() upper in the codeAndy Shevchenko
Move acpi_gpio_to_gpiod_flags() upper in the code to allow further refactoring. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Move non-critical code outside of critical sectionAndy Shevchenko
Mika noticed that some code is run under mutex when it doesn't require the lock, like an error code assignment. Move non-critical code outside of critical section. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Take into account debounce settingsAndy Shevchenko
We didn't take into account the debounce settings supplied by ACPI. This change is targeting the mentioned gap. Reported-by: Coiby Xu <coiby.xu@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Use named item for enum gpiod_flags variableAndy Shevchenko
Use named item instead of plain integer for enum gpiod_flags to make it clear that even 0 has its own meaning. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Respect bias settings for GpioInt() resourceAndy Shevchenko
In some cases the GpioInt() resource is coming with bias settings which may affect system functioning. Respect bias settings for GpioInt() resource by calling acpi_gpio_update_gpiod_*flags() API in acpi_dev_gpio_irq_get(). Reported-by: Jamie McClymont <jamie@kwiius.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: Introduce gpio_set_debounce_timeout() for internal useAndy Shevchenko
In some cases we would like to have debounce setter which doesn't fail when a feature is not supported by a controller. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2020-11-16gpiolib: Extract gpio_set_config_with_argument_optional() helperAndy Shevchenko
This function is useful for internal use in the GPIO library. There will be new user coming, prepare a helper for the new comer and the existing ones. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: move bias related code from gpio_set_config() to gpio_set_bias()Andy Shevchenko
Move bias related code from gpio_set_config() to gpio_set_bias(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: Extract gpio_set_config_with_argument() for future useAndy Shevchenko
In the future we will need to have a separate function that takes an arbitrary argument value. Extract gpio_set_config_with_argument() for that purpose. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: use proper API to pack pin configuration parametersAndy Shevchenko
Instead of open coded macro use, call pinconf_to_config_packed(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: add missed break statementAndy Shevchenko
It's no difference in the functionality, but after the change the code is less error prone to various checkers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: Replace unsigned by unsigned intAndy Shevchenko
Replace unsigned by unsigned int in GPIO library code. Note, legacy API left untouched. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: devres: shrink devm_gpiochip_add_data_with_key()Bartosz Golaszewski
If all we want to manage is a single pointer, there's no need to manually allocate and add a new devres. We can simply use devm_add_action_or_reset() and shrink the code by a good bit. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-12 23:48:02 +0000