| Age | Commit message (Collapse) | Author |
|---|
|
i.MX8qxp Display Controller(DC) is comprised of three main components that
include a blit engine for 2D graphics accelerations, display controller for
display output processing, as well as a command sequencer. Add kernel
mode setting support for the display controller part with two CRTCs and
two primary planes(backed by FetchLayer and FetchWarp respectively). The
registers of the display controller are accessed without command sequencer
involved, instead just by using CPU. The command sequencer is supposed to
be used by the blit engine.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250414035028.1561475-13-victor.liu@nxp.com
|
|
i.MX8qxp Display Controller has a built-in interrupt controller to support
Enable/Status/Preset/Clear interrupt bit. Add driver for it.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250414035028.1561475-12-victor.liu@nxp.com
|
|
i.MX8qxp Display Controller pixel engine consists of all processing
units that operate in the AXI bus clock domain. Add drivers for
ConstFrame, ExtDst, FetchLayer, FetchWarp and LayerBlend units, as
well as a pixel engine driver, so that two displays with primary
planes can be supported. The pixel engine driver and those unit
drivers are components to be aggregated by a master registered in
the upcoming DRM driver.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-11-victor.liu@nxp.com
|
|
i.MX8qxp Display Controller display engine consists of all processing
units that operate in a display clock domain. Add minimal feature
support with FrameGen and TCon so that the engine can output display
timings. The FrameGen driver, TCon driver and display engine driver
are components to be aggregated by a master registered in the upcoming
DRM driver.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-10-victor.liu@nxp.com
|
|
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
We stopped using the driver initialized date in commit 7fb8af6798e8
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move the public header file drm_client_setup.h to the clients/
subdirectory and update all drivers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Compile-testing random configurations leads to failures in
dcss-kms.c from a missing declaration:
drivers/gpu/drm/imx/dcss/dcss-kms.c:95:8: error: use of undeclared identifier 'drm_bridge_attach'
95 | ret = drm_bridge_attach(encoder, bridge, NULL,
| ^
drivers/gpu/drm/imx/dcss/dcss-kms.c:96:5: error: use of undeclared identifier 'DRM_BRIDGE_ATTACH_NO_CONNECTOR'
96 | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
| ^
Include the header directly.
Fixes: 004555a18d57 ("drm/imx/dcss: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028163527.2425783-1-arnd@kernel.org
|
|
Allow imx/dcss to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-8-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
|
|
Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-7-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
|
|
The driver now uses the legacy bridge helper code but can be configured
to get built without it:
ERROR: modpost: "devm_imx_drm_legacy_bridge" [drivers/gpu/drm/imx/ipuv3/parallel-display.ko] undefined!
Add the required dependency, same as in the ldb driver.
Fixes: f94b9707a1c9 ("drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-1-arnd@kernel.org
|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-22-tzimmermann@suse.de
|
|
Call drm_client_setup_with_color_mode() to run the kernel's default
client setup for DRM. Set fbdev_probe in struct drm_driver, so that
the client setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-21-tzimmermann@suse.de
|
|
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
The dcss driver specifies a preferred color mode of 32. As this
is the default if no format has been given, leave it out entirely.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-20-tzimmermann@suse.de
|
|
When drm/bridge-connector was moved to DRM_DISPLAY_HELPER not all
users were updated. Add missing Kconfig selections.
Fixes: 9da7ec9b19d8 ("drm/bridge-connector: move to DRM_DISPLAY_HELPER module")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906063857.2223442-1-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 47b1be5c0f4e ("staging: imx/drm: request irq only after adding the crtc")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-3-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912083020.3720233-2-ruanjinjie@huawei.com
[DB: fixed the subject]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Backmerging to get fixes from v6.12-rc7.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The imx-tve driver is the only remaining user of
imx_drm_connector_destroy(). Move the function to imx-tve.c
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-12-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use the imx_legacy bridge driver instead of handlign display modes via
the connector node.
All existing usecases already support attaching using
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
doesn't support creating connector at all. Switch to
drm_bridge_connector at the same time.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-11-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use the imx_legacy bridge driver instead of handlign display modes via
the connector node.
All existing usecases already support attaching using
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge
doesn't support creating connector at all. Switch to
drm_bridge_connector at the same time.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-10-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-8-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases. The MFD_SYSCON symbol is moved to select to
prevent Kconfig symbol loops.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-7-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
None of the boards ever supported by the upstream kernel used the custom
DDC bus support with the LDB connector. If a need arises to do so, one
should use panel-simple and its DDC bus code. Drop ddc-i2c-bus support
from the imx-ldb driver.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-6-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Bindings for the imx-ldb never allowed specifying the EDID in DT. None
of the existing DT files use it. Drop it now in favour of using debugfs
overrides or the drm.edid_firmware support.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-5-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
None of the in-kernel DT files ever used edid override with the
fsl-imx-drm driver. In case the EDID needs to be specified manually, DRM
core allows one to either override it via the debugfs or to load it via
request_firmware by using DRM_LOAD_EDID_FIRMWARE. In all other cases
EDID and/or modes are to be provided as a part of the panel driver.
Drop support for the edid property.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-4-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Drop unused defines and obsolete prototypes from the imx-drm.h header.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-3-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Prefer the struct drm_edid based functions for storing the EDID and
updating the connector.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a1698044d556072e79041d69b8702099fd17bd90.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/c1f1143b5aea14aea968cda6508b275b2f7246ea.1715691257.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2f59a7ad10c29c21f08223ef19221cef48623cc8.1715691257.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let's start the new release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit c0e0f139354c01e0213204e4a96e7076e5a3e396, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd93d43b07f8ed6368119f4a5ddac2ee80debe53.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by lcdc. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-25-tzimmermann@suse.de
|
|
Add support for the drm_panic module, which displays a user-friendly
message to the screen when a kernel panic occurs.
v7:
* use drm_panic_gem_get_scanout_buffer() helper
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions
v12:
* Rename drm_panic_gem_get_scanout_buffer to drm_fb_dma_get_scanout_buffer
(Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-9-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Backmerging to get v6.9-rc2 changes into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
DRM_DW_HDMI has a number of dependencies that might not be enabled.
However, drivers were used to selecting it while not enforcing the
DRM_DW_HDMI dependencies.
This could result in Kconfig warnings (and further build breakages) such
as:
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for DRM_DW_HDMI
Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && DRM_DISPLAY_HELPER [=n]
Selected by [m]:
- DRM_SUN8I_DW_HDMI [=m] && HAS_IOMEM [=y] && DRM_SUN4I [=m]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403262127.kZkttfNz-lkp@intel.com/
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240327-kms-kconfig-helpers-v3-7-eafee11b84b3@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/311f6eec96d47949b16a670529f4d89fcd97aefa.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The resource is inclusive of the ->start and ->end addresses so this
calculation is not correct. It should be "res->end - res->start + 1".
Use the resource_size() to do the calculation.
Fixes: 90393c9b5408 ("drm/imx/dcss: request memory region")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4914592b-4256-4c9c-bc1d-6dec1e473831@moroto.mountain
|
|
dcss currently allocates and ioremaps quite a few resources in its probe
function's call graph. Devres now provides convenient functions which
perform the same task but do the cleanup automatically.
Port all memory allocations and ioremap() calls to the devres
counterparts.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124111904.18261-4-pstanner@redhat.com
|
|
The driver's memory regions are currently just ioremap()ed, but not
reserved through a request. That's not a bug, but having the request is
a little more robust.
Implement the region-request through the corresponding managed
devres-function.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124111904.18261-3-pstanner@redhat.com
|
|
This will trade the W=1 warning -Wformat-overflow to
-Wformat-truncation. This lets us enable -Wformat-overflow subsystem
wide.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14c0108a54007a8360d84162a1d63cba9613b945.1704908087.git.jani.nikula@intel.com
|
|
The struct imx_lcdc driver data is allocated using devm_drm_dev_alloc()
so it must not be explicitly kfree()d.
Also drm_kms_helper_poll_fini() should not be called as there is no
matching drm_kms_helper_poll_init(). So drop the release function
completely.
Fixes: c87e859cdeb5 ("drm/imx/lcdc: Implement DRM driver for imx25")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706092731.2630232-1-u.kleine-koenig@pengutronix.de
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data in a single step. With this, adjust the
includes to explicitly include the correct headers. That also serves as
preparation to remove implicit includes within the DT headers
(of_device.h in particular).
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20231020125214.2930329-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
