summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/v3d
AgeCommit message (Collapse)Author
41 hoursMerge tag 'mm-stable-2025-07-30-15-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "As usual, many cleanups. The below blurbiage describes 42 patchsets. 21 of those are partially or fully cleanup work. "cleans up", "cleanup", "maintainability", "rationalizes", etc. I never knew the MM code was so dirty. "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes) addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for merging with existing adjacent VMAs. "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park) adds a new kernel module which simplifies the setup and usage of DAMON in production environments. "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig) is a cleanup to the writeback code which removes a couple of pointers from struct writeback_control. "drivers/base/node.c: optimization and cleanups" (Donet Tom) contains largely uncorrelated cleanups to the NUMA node setup and management code. "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman) does some maintenance work on the userfaultfd code. "Readahead tweaks for larger folios" (Ryan Roberts) implements some tuneups for pagecache readahead when it is reading into order>0 folios. "selftests/mm: Tweaks to the cow test" (Mark Brown) provides some cleanups and consistency improvements to the selftests code. "Optimize mremap() for large folios" (Dev Jain) does that. A 37% reduction in execution time was measured in a memset+mremap+munmap microbenchmark. "Remove zero_user()" (Matthew Wilcox) expunges zero_user() in favor of the more modern memzero_page(). "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand) addresses some warts which David noticed in the huge page code. These were not known to be causing any issues at this time. "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park) provides some cleanup and consolidation work in DAMON. "use vm_flags_t consistently" (Lorenzo Stoakes) uses vm_flags_t in places where we were inappropriately using other types. "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy) increases the reliability of large page allocation in the memfd code. "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple) removes several now-unneeded PFN_* flags. "mm/damon: decouple sysfs from core" (SeongJae Park) implememnts some cleanup and maintainability work in the DAMON sysfs layer. "madvise cleanup" (Lorenzo Stoakes) does quite a lot of cleanup/maintenance work in the madvise() code. "madvise anon_name cleanups" (Vlastimil Babka) provides additional cleanups on top or Lorenzo's effort. "Implement numa node notifier" (Oscar Salvador) creates a standalone notifier for NUMA node memory state changes. Previously these were lumped under the more general memory on/offline notifier. "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan) cleans up the pageblock isolation code and fixes a potential issue which doesn't seem to cause any problems in practice. "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park) adds additional drgn- and python-based DAMON selftests which are more comprehensive than the existing selftest suite. "Misc rework on hugetlb faulting path" (Oscar Salvador) fixes a rather obscure deadlock in the hugetlb fault code and follows that fix with a series of cleanups. "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport) rationalizes and cleans up the highmem-specific code in the CMA allocator. "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand) provides cleanups and future-preparedness to the migration code. "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park) adds some tracepoints to some DAMON auto-tuning code. "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park) does that. "mm/damon: misc cleanups" (SeongJae Park) also does what it claims. "mm: folio_pte_batch() improvements" (David Hildenbrand) cleans up the large folio PTE batching code. "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park) facilitates dynamic alteration of DAMON's inter-node allocation policy. "Remove unmap_and_put_page()" (Vishal Moola) provides a couple of page->folio conversions. "mm: per-node proactive reclaim" (Davidlohr Bueso) implements a per-node control of proactive reclaim - beyond the current memcg-based implementation. "mm/damon: remove damon_callback" (SeongJae Park) replaces the damon_callback interface with a more general and powerful damon_call()+damos_walk() interface. "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes) implements a number of mremap cleanups (of course) in preparation for adding new mremap() functionality: newly permit the remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It still excludes some specialized situations where this cannot be performed reliably. "drop hugetlb_free_pgd_range()" (Anthony Yznaga) switches some sparc hugetlb code over to the generic version and removes the thus-unneeded hugetlb_free_pgd_range(). "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park) augments the present userspace-requested update of DAMON sysfs monitoring files. Automatic update is now provided, along with a tunable to control the update interval. "Some randome fixes and cleanups to swapfile" (Kemeng Shi) does what is claims. "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand) provides (and uses) a means by which debug-style functions can grab a copy of a pageframe and inspect it locklessly without tripping over the races inherent in operating on the live pageframe directly. "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan) addresses the large contention issues which can be triggered by reads from that procfs file. Latencies are reduced by more than half in some situations. The series also introduces several new selftests for the /proc/pid/maps interface. "__folio_split() clean up" (Zi Yan) cleans up __folio_split()! "Optimize mprotect() for large folios" (Dev Jain) provides some quite large (>3x) speedups to mprotect() when dealing with large folios. "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian) does some cleanup work in the selftests code. "tools/testing: expand mremap testing" (Lorenzo Stoakes) extends the mremap() selftest in several ways, including adding more checking of Lorenzo's recently added "permit mremap() move of multiple VMAs" feature. "selftests/damon/sysfs.py: test all parameters" (SeongJae Park) extends the DAMON sysfs interface selftest so that it tests all possible user-requested parameters. Rather than the present minimal subset" * tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits) MAINTAINERS: add missing headers to mempory policy & migration section MAINTAINERS: add missing file to cgroup section MAINTAINERS: add MM MISC section, add missing files to MISC and CORE MAINTAINERS: add missing zsmalloc file MAINTAINERS: add missing files to page alloc section MAINTAINERS: add missing shrinker files MAINTAINERS: move memremap.[ch] to hotplug section MAINTAINERS: add missing mm_slot.h file THP section MAINTAINERS: add missing interval_tree.c to memory mapping section MAINTAINERS: add missing percpu-internal.h file to per-cpu section mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info() selftests/damon: introduce _common.sh to host shared function selftests/damon/sysfs.py: test runtime reduction of DAMON parameters selftests/damon/sysfs.py: test non-default parameters runtime commit selftests/damon/sysfs.py: generalize DAMON context commit assertion selftests/damon/sysfs.py: generalize monitoring attributes commit assertion selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion selftests/damon/sysfs.py: test DAMOS filters commitment selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion selftests/damon/sysfs.py: test DAMOS destinations commitment ...
3 daysMerge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...
5 daysMerge tag 'pull-mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs mount updates from Al Viro: - mount hash conflicts rudiments are gone now - we do not allow multiple mounts with the same parent/mountpoint to be hashed at the same time. - 'struct mount' changes: - mnt_umounting is gone - mnt_slave_list/mnt_slave is an hlist now - overmounts are kept track of by explicit pointer in mount - a bunch of flags moved out of mnt_flags to a new field, with only namespace_sem for protection - mnt_expiry is protected by mount_lock now (instead of namespace_sem) - MNT_LOCKED is used only for mounts that need to remain attached to their parents to prevent mountpoint exposure - no more overloading it for absolute roots - all mnt_list uses are transient now - it's used only to represent temporary sets during umount_tree() - mount refcounting change: children no longer pin parents for any mounts, whether they'd passed through umount_tree() or not - 'struct mountpoint' changes: - refcount is no more; what matters is ->m_list emptiness - instead of temporary bumping the refcount, we insert a new object (pinned_mountpoint) into ->m_list - new calling conventions for lock_mount() and friends - do_move_mount()/attach_recursive_mnt() seriously cleaned up - globals in fs/pnode.c are gone - propagate_mnt(), change_mnt_propagation() and propagate_umount() cleaned up (in the last case - pretty much completely rewritten). - freeing of emptied mnt_namespace is done in namespace_unlock(). For one thing, there are subtle ordering requirements there; for another it simplifies cleanups. - assorted cleanups - restore the machinery for long-term mounts from accumulated bitrot. This is going to get a followup come next cycle, when the change of vfs_fs_parse_string() calling conventions goes into -next * tag 'pull-mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (48 commits) statmount_mnt_basic(): simplify the logics for group id invent_group_ids(): zero ->mnt_group_id always implies !IS_MNT_SHARED() get rid of CL_SHARE_TO_SLAVE take freeing of emptied mnt_namespace to namespace_unlock() copy_tree(): don't link the mounts via mnt_list change_mnt_propagation(): move ->mnt_master assignment into MS_SLAVE case mnt_slave_list/mnt_slave: turn into hlist_head/hlist_node turn do_make_slave() into transfer_propagation() do_make_slave(): choose new master sanely change_mnt_propagation(): do_make_slave() is a no-op unless IS_MNT_SHARED() change_mnt_propagation() cleanups, step 1 propagate_mnt(): fix comment and convert to kernel-doc, while we are at it propagate_mnt(): get rid of last_dest fs/pnode.c: get rid of globals propagate_one(): fold into the sole caller propagate_one(): separate the "what should be the master for this copy" part propagate_one(): separate the "do we need secondary here?" logics propagate_mnt(): handle all peer groups in the same loop propagate_one(): get rid of dest_master mount: separate the flags accessed only under namespace_sem ...
2025-07-15drm/v3d: Use DRM_GPU_SCHED_STAT_NO_HANG to skip the resetMaíra Canal
When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and allow the timer to be rearmed. This gives long-running jobs a chance to complete. Instead of manipulating scheduler's internals, inform the scheduler that the job did not actually timeout and no reset was performed through the new status code DRM_GPU_SCHED_STAT_NO_HANG. Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-5-5c5ba4f55039@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-07-15drm/sched: Rename DRM_GPU_SCHED_STAT_NOMINAL to DRM_GPU_SCHED_STAT_RESETMaíra Canal
Among the scheduler's statuses, the only one that indicates an error is DRM_GPU_SCHED_STAT_ENODEV. Any status other than DRM_GPU_SCHED_STAT_ENODEV signifies that the operation succeeded and the GPU is in a nominal state. However, to provide more information about the GPU's status, it is needed to convey more information than just "OK". Therefore, rename DRM_GPU_SCHED_STAT_NOMINAL to DRM_GPU_SCHED_STAT_RESET, which better communicates the meaning of this status. The status DRM_GPU_SCHED_STAT_RESET indicates that the GPU has hung, but it has been successfully reset and is now in a nominal state again. Reviewed-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-1-5c5ba4f55039@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-07-09mm: remove callers of pfn_t functionalityAlistair Popple
All PFN_* pfn_t flags have been removed. Therefore there is no longer a need for the pfn_t type and all uses can be replaced with normal pfns. Link: https://lkml.kernel.org/r/bbedfa576c9822f8032494efbe43544628698b1f.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Björn Töpel <bjorn@rivosinc.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: John Groves <john@groves.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-07-02drm/v3d: Disable interrupts before resetting the GPUMaíra Canal
Currently, an interrupt can be triggered during a GPU reset, which can lead to GPU hangs and NULL pointer dereference in an interrupt context as shown in the following trace: [ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 314.043822] Mem abort info: [ 314.046606] ESR = 0x0000000096000005 [ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits [ 314.055651] SET = 0, FnV = 0 [ 314.058695] EA = 0, S1PTW = 0 [ 314.061826] FSC = 0x05: level 1 translation fault [ 314.066694] Data abort info: [ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000 [ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d] [ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d] [ 314.160198] sp : ffffffc080003ea0 [ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000 [ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0 [ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000 [ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000 [ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000 [ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001 [ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874 [ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180 [ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb [ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 314.234807] Call trace: [ 314.237243] v3d_irq+0xec/0x2e0 [v3d] [ 314.240906] __handle_irq_event_percpu+0x58/0x218 [ 314.245609] handle_irq_event+0x54/0xb8 [ 314.249439] handle_fasteoi_irq+0xac/0x240 [ 314.253527] handle_irq_desc+0x48/0x68 [ 314.257269] generic_handle_domain_irq+0x24/0x38 [ 314.261879] gic_handle_irq+0x48/0xd8 [ 314.265533] call_on_irq_stack+0x24/0x58 [ 314.269448] do_interrupt_handler+0x88/0x98 [ 314.273624] el1_interrupt+0x34/0x68 [ 314.277193] el1h_64_irq_handler+0x18/0x28 [ 314.281281] el1h_64_irq+0x64/0x68 [ 314.284673] default_idle_call+0x3c/0x168 [ 314.288675] do_idle+0x1fc/0x230 [ 314.291895] cpu_startup_entry+0x3c/0x50 [ 314.295810] rest_init+0xe4/0xf0 [ 314.299030] start_kernel+0x5e8/0x790 [ 314.302684] __primary_switched+0x80/0x90 [ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017) [ 314.312775] ---[ end trace 0000000000000000 ]--- [ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 314.324249] SMP: stopping secondary CPUs [ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000 [ 314.334076] PHYS_OFFSET: 0x0 [ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b [ 314.342337] Memory Limit: none [ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Before resetting the GPU, it's necessary to disable all interrupts and deal with any interrupt handler still in-flight. Otherwise, the GPU might reset with jobs still running, or yet, an interrupt could be handled during the reset. Cc: stable@vger.kernel.org Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Reviewed-by: Juan A. Suarez <jasuarez@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://lore.kernel.org/r/20250628224243.47599-1-mcanal@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-06-29sanitize handling of long-term internal mountsAl Viro
Original rationale for those had been the reduced cost of mntput() for the stuff that is mounted somewhere. Mount refcount increments and decrements are frequent; what's worse, they tend to concentrate on the same instances and cacheline pingpong is quite noticable. As the result, mount refcounts are per-cpu; that allows a very cheap increment. Plain decrement would be just as easy, but decrement-and-test is anything but (we need to add the components up, with exclusion against possible increment-from-zero, etc.). Fortunately, there is a very common case where we can tell that decrement won't be the final one - if the thing we are dropping is currently mounted somewhere. We have an RCU delay between the removal from mount tree and dropping the reference that used to pin it there, so we can just take rcu_read_lock() and check if the victim is mounted somewhere. If it is, we can go ahead and decrement without and further checks - the reference we are dropping is not the last one. If it isn't, we get all the fun with locking, carefully adding up components, etc., but the majority of refcount decrements end up taking the fast path. There is a major exception, though - pipes and sockets. Those live on the internal filesystems that are not going to be mounted anywhere. They are not going to be _un_mounted, of course, so having to take the slow path every time a pipe or socket gets closed is really obnoxious. Solution had been to mark them as long-lived ones - essentially faking "they are mounted somewhere" indicator. With minor modification that works even for ones that do eventually get dropped - all it takes is making sure we have an RCU delay between clearing the "mounted somewhere" indicator and dropping the reference. There are some additional twists (if you want to drop a dozen of such internal mounts, you'd be better off with clearing the indicator on all of them, doing an RCU delay once, then dropping the references), but in the basic form it had been * use kern_mount() if you want your internal mount to be a long-term one. * use kern_unmount() to undo that. Unfortunately, the things did rot a bit during the mount API reshuffling. In several cases we have lost the "fake the indicator" part; kern_unmount() on the unmount side remained (it doesn't warn if you use it on a mount without the indicator), but all benefits regaring mntput() cost had been lost. To get rid of that bitrot, let's add a new helper that would work with fs_context-based API: fc_mount_longterm(). It's a counterpart of fc_mount() that does, on success, mark its result as long-term. It must be paired with kern_unmount() or equivalents. Converted: 1) mqueue (it used to use kern_mount_data() and the umount side is still as it used to be) 2) hugetlbfs (used to use kern_mount_data(), internal mount is never unmounted in this one) 3) i915 gemfs (used to be kern_mount() + manual remount to set options, still uses kern_unmount() on umount side) 4) v3d gemfs (copied from i915) Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-06-16drm/v3d: Avoid NULL pointer dereference in `v3d_job_update_stats()`Maíra Canal
The following kernel Oops was recently reported by Mesa CI: [ 800.139824] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000588 [ 800.148619] Mem abort info: [ 800.151402] ESR = 0x0000000096000005 [ 800.155141] EC = 0x25: DABT (current EL), IL = 32 bits [ 800.160444] SET = 0, FnV = 0 [ 800.163488] EA = 0, S1PTW = 0 [ 800.166619] FSC = 0x05: level 1 translation fault [ 800.171487] Data abort info: [ 800.174357] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 800.179832] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 800.184873] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 800.190176] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001014c2000 [ 800.196607] [0000000000000588] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 800.205305] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 800.211564] Modules linked in: vc4 snd_soc_hdmi_codec drm_display_helper v3d cec gpu_sched drm_dma_helper drm_shmem_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm i2c_brcmstb snd_timer snd backlight [ 800.234448] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 800.244182] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 800.250005] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 800.256959] pc : v3d_job_update_stats+0x60/0x130 [v3d] [ 800.262112] lr : v3d_job_update_stats+0x48/0x130 [v3d] [ 800.267251] sp : ffffffc080003e60 [ 800.270555] x29: ffffffc080003e60 x28: ffffffd842784980 x27: 0224012000000000 [ 800.277687] x26: ffffffd84277f630 x25: ffffff81012fd800 x24: 0000000000000020 [ 800.284818] x23: ffffff8040238b08 x22: 0000000000000570 x21: 0000000000000158 [ 800.291948] x20: 0000000000000000 x19: ffffff8040238000 x18: 0000000000000000 [ 800.299078] x17: ffffffa8c1bd2000 x16: ffffffc080000000 x15: 0000000000000000 [ 800.306208] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 800.313338] x11: 0000000000000040 x10: 0000000000001a40 x9 : ffffffd83b39757c [ 800.320468] x8 : ffffffd842786420 x7 : 7fffffffffffffff x6 : 0000000000ef32b0 [ 800.327598] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : ffffffd842784980 [ 800.334728] x2 : 0000000000000004 x1 : 0000000000010002 x0 : 000000ba4c0ca382 [ 800.341859] Call trace: [ 800.344294] v3d_job_update_stats+0x60/0x130 [v3d] [ 800.349086] v3d_irq+0x124/0x2e0 [v3d] [ 800.352835] __handle_irq_event_percpu+0x58/0x218 [ 800.357539] handle_irq_event+0x54/0xb8 [ 800.361369] handle_fasteoi_irq+0xac/0x240 [ 800.365458] handle_irq_desc+0x48/0x68 [ 800.369200] generic_handle_domain_irq+0x24/0x38 [ 800.373810] gic_handle_irq+0x48/0xd8 [ 800.377464] call_on_irq_stack+0x24/0x58 [ 800.381379] do_interrupt_handler+0x88/0x98 [ 800.385554] el1_interrupt+0x34/0x68 [ 800.389123] el1h_64_irq_handler+0x18/0x28 [ 800.393211] el1h_64_irq+0x64/0x68 [ 800.396603] default_idle_call+0x3c/0x168 [ 800.400606] do_idle+0x1fc/0x230 [ 800.403827] cpu_startup_entry+0x40/0x50 [ 800.407742] rest_init+0xe4/0xf0 [ 800.410962] start_kernel+0x5e8/0x790 [ 800.414616] __primary_switched+0x80/0x90 [ 800.418622] Code: 8b170277 8b160296 11000421 b9000861 (b9401ac1) [ 800.424707] ---[ end trace 0000000000000000 ]--- [ 800.457313] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- This issue happens when the file descriptor is closed before the jobs submitted by it are completed. When the job completes, we update the global GPU stats and the per-fd GPU stats, which are exposed through fdinfo. If the file descriptor was closed, then the struct `v3d_file_priv` and its stats were already freed and we can't update the per-fd stats. Therefore, if the file descriptor was already closed, don't update the per-fd GPU stats, only update the global ones. Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Link: https://lore.kernel.org/r/20250602151451.10161-1-mcanal@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-06-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to forward to v6.16-rc1 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-05-28Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ...
2025-05-28drm/sched: Store the drm client_id in drm_sched_fencePierre-Eric Pelloux-Prayer
This will be used in a later commit to trace the drm client_id in some of the gpu_scheduler trace events. This requires changing all the users of drm_sched_job_init to add an extra parameter. The newly added drm_client_id field in the drm_sched_fence is a bit of a duplicate of the owner one. One suggestion I received was to merge those 2 fields - this can't be done right now as amdgpu uses some special values (AMDGPU_FENCE_OWNER_*) that can't really be translated into a client id. Christian is working on getting rid of those; when it's done we should be able to squash owner/drm_client_id together. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250526125505.2360-3-pierre-eric.pelloux-prayer@amd.com
2025-05-06BackMerge tag 'v6.15-rc5' into drm-nextDave Airlie
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-05-02drm/v3d: Add job to pending list if the reset was skippedMaíra Canal
When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and let the timer get rearmed. This gives long-running jobs a chance to complete. However, when `timedout_job()` is called, the job in question is removed from the pending list, which means it won't be automatically freed through `free_job()`. Consequently, when we skip the reset and keep the job running, the job won't be freed when it finally completes. This situation leads to a memory leak, as exposed in [1] and [2]. Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active"), this patch ensures the job is put back on the pending list when extending the timeout. Cc: stable@vger.kernel.org # 6.0 Reported-by: Daivik Bhatia <dtgs1208@gmail.com> Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12227 [1] Closes: https://github.com/raspberrypi/linux/issues/6817 [2] Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://lore.kernel.org/r/20250430210643.57924-1-mcanal@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-04-27drm/v3d: client ranges from axi_ids are different with V3D 7.1Jose Maria Casanova Crespo
The client mask has been reduced from 8 bits on V3D 4.1 to 7 bits on V3D 7.1, so the ranges for each client are not compatible. On V3D 7.1, the CSD client can also report MMU errors. Therefore, add its AXI ID to the IDs list. Fixes: 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x") Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20250425122522.18425-2-jmcasanova@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-04-27drm/v3d: fix client obtained from axi_ids on V3D 4.1Jose Maria Casanova Crespo
In the case of MMU errors caused by the TFU unit, the client that causes the MMU error is expected to be reported. But in the case of MMU TFU errors, a non existing client was being reported. This happened because the client calculation was taking into account more than the bits 0-7 from the axi_id that were representing the client. [ 27.845132] v3d fec00000.v3d: MMU error from client ? (13) at 0x3bb1000, pte invalid Masking the bits and using the correct axi_id ranges fixes the calculation to report the real guilty client on V3D 4.1 and 4.2. Make the MMU error print axi_id with hexadecimal as used in the ranges. Fixes: 38c2c7917adc ("drm/v3d: Fix and extend MMU error handling.") Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20250425122522.18425-1-jmcasanova@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
2025-04-10drm/v3d: Fix Indirect Dispatch configuration for V3D 7.1.6 and laterMaíra Canal
This commit is a resubmission of commit 1fe1c66274fb ("drm/v3d: Fix Indirect Dispatch configuration for V3D 7.1.6 and later"), which was accidentally reverted by commit 91dae758bdb8 ("Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next"), likely due to an unfortunate conflict resolution. From the original commit message: ``` `args->cfg[4]` is configured in Indirect Dispatch using the number of batches. Currently, for all V3D tech versions, `args->cfg[4]` equals the number of batches subtracted by 1. But, for V3D 7.1.6 and later, we must not subtract 1 from the number of batches. Implement the fix by checking the V3D tech version and revision. Fixes several `dEQP-VK.synchronization*` CTS tests related to Indirect Dispatch. ``` Fixes: 91dae758bdb8 ("Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://lore.kernel.org/r/20250409205051.9639-1-mcanal@igalia.com
2025-04-07Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-03-28Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "Outside of drm there are some rust patches from Danilo who maintains that area in here, and some pieces for drm header check tests. The major things in here are a new driver supporting the touchbar displays on M1/M2, the nova-core stub driver which is just the vehicle for adding rust abstractions and start developing a real driver inside of. xe adds support for SVM with a non-driver specific SVM core abstraction that will hopefully be useful for other drivers, along with support for shrinking for TTM devices. I'm sure xe and AMD support new devices, but the pipeline depth on these things is hard to know what they end up being in the marketplace! uapi: - add mediatek tiled fourcc - add support for notifying userspace on device wedged new driver: - appletbdrm: support for Apple Touchbar displays on m1/m2 - nova-core: skeleton rust driver to develop nova inside off firmware: - add some rust firmware pieces rust: - add 'LocalModule' type alias component: - add helper to query bound status fbdev: - fbtft: remove access to page->index media: - cec: tda998x: import driver from drm dma-buf: - add fast path for single fence merging tests: - fix lockdep warnings atomic: - allow full modeset on connector changes - clarify semantics of allow_modeset and drm_atomic_helper_check - async-flip: support on arbitary planes - writeback: fix UAF - Document atomic-state history format-helper: - support ARGB8888 to ARGB4444 conversions buddy: - fix multi-root cleanup ci: - update IGT dp: - support extended wake timeout - mst: fix RAD to string conversion - increase DPCD eDP control CAP size to 5 bytes - add DPCD eDP v1.5 definition - add helpers for LTTPR transparent mode panic: - encode QR code according to Fido 2.2 scheduler: - add parameter struct for init - improve job peek/pop operations - optimise drm_sched_job struct layout ttm: - refactor pool allocation - add helpers for TTM shrinker panel-orientation: - add a bunch of new quirks panel: - convert panels to multi-style functions - edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3, LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006, Lenovo T14s Gen6 Snapdragon - himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay kd110n11-51ie, Starry 2082109qfh040022-50e - visionox-r66451: use multi-style MIPI-DSI functions - raydium-rm67200: Add driver for Raydium RM67200 - simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17 - sony-td4353-jdi: Use MIPI-DSI multi-func interface - summit: Add driver for Apple Summit display panel - visionox-rm692e5: Add driver for Visionox RM692E5 bridge: - pass full atomic state to various callbacks - adv7511: Report correct capabilities - it6505: Fix HDCP V compare - snd65dsi86: fix device IDs - nwl-dsi: set bridge type - ti-sn65si83: add error recovery and set bridge type - synopsys: add HDMI audio support xe: - support device-wedged event - add mmap support for PCI memory barrier - perf pmu integration and expose per-engien activity - add EU stall sampling support - GPU SVM and Xe SVM implementation - use TTM shrinker - add survivability mode to allow the driver to do firmware updates in critical failure states - PXP HWDRM support for MTL and LNL - expose package/vram temps over hwmon - enable DP tunneling - drop mmio_ext abstraction - Reject BO evcition if BO is bound to current VM - Xe suballocator improvements - re-use display vmas when possible - add GuC Buffer Cache abstraction - PCI ID update for Panther Lake and Battlemage - Enable SRIOV for Panther Lake - Refactor VRAM manager location i915: - enable extends wake timeout - support device-wedged event - Enable DP 128b/132b SST DSC - FBC dirty rectangle support for display version 30+ - convert i915/xe to drm client setup - Compute HDMI PLLS for rates not in fixed tables - Allow DSB usage when PSR is enabled on LNL+ - Enable panel replay without full modeset - Enable async flips with compressed buffers on ICL+ - support luminance based brightness via DPCD for eDP - enable VRR enable/disable without full modeset - allow GuC SLPC default strategies on MTL+ for performance - lots of display refactoring in move to struct intel_display amdgpu: - add device wedged event - support async page flips on overlay planes - enable broadcast RGB drm property - add info ioctl for virt mode - OEM i2c support for RGB lights - GC 11.5.2 + 11.5.3 support - SDMA 6.1.3 support - NBIO 7.9.1 + 7.11.2 support - MMHUB 1.8.1 + 3.3.2 support - DCN 3.6.0 support - Add dynamic workload profile switching for GC 10-12 - support larger VBIOS sizes - Mark gttsize parameters as deprecated - Initial JPEG queue resset support amdkfd: - add KFD per process flags for setting precision - sync pasid values between KGD and KFD - improve GTT/VRAM handling for APUs - fix user queue validation on GC7/8 - SDMA queue reset support raedeon: - rs400 hyperz fix i2c: - td998x: drop platform_data, split driver into media and bridge ast: - transmitter chip detection refactoring - vbios display mode refactoring - astdp: fix connection status and filter unsupported modes - cursor handling refactoring imagination: - check job dependencies with sched helper ivpu: - improve command queue handling - use workqueue for IRQ handling - add support HW fault injection - locking fixes mgag200: - add support for G200eH5 msm: - dpu: add concurrent writeback support for DPU 10.x+ - use LTTPR helpers - GPU: - Fix obscure GMU suspend failure - Expose syncobj timeline support - Extend GPU devcoredump with pagetable info - a623 support - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump - Display: - Add cpu-cfg interconnect paths on SM8560 and SM8650 - Introduce KMS OMMU fault handler, causing devcoredump snapshot - Fixed error pointer dereference in msm_kms_init_aspace() - DPU: - Fix mode_changing handling - Add writeback support on SM6150 (QCS615) - Fix DSC programming in 1:1:1 topology - Reworked hardware resource allocation, moving it to the CRTC code - Enabled support for Concurrent WriteBack (CWB) on SM8650 - Enabled CDM blocks on all relevant platforms - Reworked debugfs interface for BW/clocks debugging - Clear perf params before calculating bw - Support YUV formats on writeback - Fixed double inclusion - Fixed writeback in YUV formats when using cloned output, Dropped wb2_formats_rgb - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt kerneldocs - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode() - DSI: - DSC-related fixes - Rework clock programming - DSI PHY: - Fix 7nm (and lower) PHY programming - Add proper DT schema definitions for DSI PHY clocks - HDMI: - Rework the driver, enabling the use of the HDMI Connector framework - Bindings: - Added eDP PHY on SA8775P nouveau: - move drm_slave_encoder interface into driver - nvkm: refactor GSP RPC - use LTTPR helpers mediatek: - HDMI fixup and refinement - add MT8188 dsc compatible - MT8365 SoC support panthor: - Expose sizes of intenral BOs via fdinfo - Fix race between reset and suspend - Improve locking qaic: - Add support for AIC200 renesas: - Fix limits in DT bindings rockchip: - support rk3562-mali - rk3576: Add HDMI support - vop2: Add new display modes on RK3588 HDMI0 up to 4K - Don't change HDMI reference clock rate - Fix DT bindings - analogix_dp: add eDP support - fix shutodnw solomon: - Set SPI device table to silence warnings - Fix pixel and scanline encoding v3d: - handle clock vc4: - Use drm_exec - Use dma-resv for wait-BO ioctl - Remove seqno infrastructure virtgpu: - Support partial mappings of GEM objects - Reserve VGA resources during initialization - Fix UAF in virtgpu_dma_buf_free_obj() - Add panic support vkms: - Switch to a managed modesetting pipeline - Add support for ARGB8888 - fix UAf xlnx: - Set correct DMA segment size - use mutex guards - Fix error handling - Fix docs" * tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits) drm/amd/pm: Update feature list for smu_v13_0_6 drm/amdgpu: Add parameter documentation for amdgpu_sync_fence drm/amdgpu/discovery: optionally use fw based ip discovery drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics drm/amdgpu/discovery: check ip_discovery fw file available drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amd/pm: Remove unnecessay UQ10 to UINT conversion drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush drm/amd/amdgpu: Increase max rings to enable SDMA page ring drm/amdgpu: Decode deferred error type in gfx aca bank parser drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs drm/amdgpu/mes: clean up SDMA HQD loop drm/amdgpu/mes: enable compute pipes across all MEC drm/amdgpu/mes: drop MES 10.x leftovers drm/amdgpu/mes: optimize compute loop handling drm/amdgpu/sdma: guilty tracking is per instance drm/amdgpu/sdma: fix engine reset handling drm/amdgpu: remove invalid usage of sched.ready drm/amdgpu: add cleaner shader trace point ...
2025-03-23drm/v3d: Use V3D_SMS registers for power on/off and reset on V3D 7.xMaíra Canal
In addition to the standard reset controller, V3D 7.x requires configuring the V3D_SMS registers for proper power on/off and reset. Add the new registers to `v3d_regs.h` and ensure they are properly configured during device probing, removal, and reset. This change fixes GPU reset issues on the Raspberry Pi 5 (BCM2712). Without exposing these registers, a GPU reset causes the GPU to hang, stopping any further job execution and freezing the desktop GUI. The same issue occurs when unloading and loading the v3d driver. Link: https://github.com/raspberrypi/linux/issues/6660 Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-5-f3ee7717ed17@igalia.com
2025-03-23drm/v3d: Associate a V3D tech revision to all supported devicesMaíra Canal
The V3D driver currently determines the GPU tech version (33, 41...) by reading a register. This approach has worked so far since this information wasn’t needed before powering on the GPU. V3D 7.1 introduces new registers that must be written to power on the GPU, requiring us to know the V3D version beforehand. To address this, associate each supported SoC with the corresponding VideoCore GPU version as part of the device data. To prevent possible mistakes, add an assertion to verify that the version specified in the device data matches the one reported by the hardware. If there is a mismatch, the kernel will trigger a warning. With the goal of maintaining consistency around the driver, use `enum v3d_gen` to assign values to `v3d->ver` and for comparisons with other V3D generations. Note that all mentions of unsupported or non-existing V3D generations (such as V3D 4.0) were removed by this commit and replaced with supported generations without functional changes. Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-1-f3ee7717ed17@igalia.com
2025-03-13drm/v3d: Set job pointer to NULL when the job's fence has an errorMaíra Canal
Similar to commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion"), ensure the job pointer is set to `NULL` when a job's fence has an error. Failing to do so can trigger kernel warnings in specific scenarios, such as: 1. v3d_csd_job_run() assigns `v3d->csd_job = job` 2. CSD job exceeds hang limit, causing a timeout → v3d_gpu_reset_for_timeout() 3. GPU reset 4. drm_sched_resubmit_jobs() sets the job's fence to `-ECANCELED`. 5. v3d_csd_job_run() detects the fence error and returns NULL, not submitting the job to the GPU 6. User-space runs `modprobe -r v3d` 7. v3d_gem_destroy() v3d_gem_destroy() triggers a warning indicating that the CSD job never ended, as we didn't set `v3d->csd_job` to NULL after the timeout. The same can also happen to BIN, RENDER, and TFU jobs. Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-2-c1e780d8e096@igalia.com
2025-03-13drm/v3d: Don't run jobs that have errors flagged in its fenceMaíra Canal
The V3D driver still relies on `drm_sched_increase_karma()` and `drm_sched_resubmit_jobs()` for resubmissions when a timeout occurs. The function `drm_sched_increase_karma()` marks the job as guilty, while `drm_sched_resubmit_jobs()` sets an error (-ECANCELED) in the DMA fence of that guilty job. Because of this, we must check whether the job’s DMA fence has been flagged with an error before executing the job. Otherwise, the same guilty job may be resubmitted indefinitely, causing repeated GPU resets. This patch adds a check for an error on the job's fence to prevent running a guilty job that was previously flagged when the GPU timed out. Note that the CPU and CACHE_CLEAN queues do not require this check, as their jobs are executed synchronously once the DRM scheduler starts them. Cc: stable@vger.kernel.org Fixes: d223f98f0209 ("drm/v3d: Add support for compute shader dispatch.") Fixes: 1584f16ca96e ("drm/v3d: Add support for submitting jobs to the TFU.") Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-1-c1e780d8e096@igalia.com
2025-02-12drm/v3d: Add clock handlingStefan Wahren
Since the initial commit 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") the struct v3d_dev reserved a pointer for an optional V3D clock. But there wasn't any code, which fetched it. So add the missing clock handling before accessing any V3D registers. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250201125046.33030-1-wahrenst@gmx.net
2025-02-12drm/sched: Use struct for drm_sched_init() paramsPhilipp Stanner
drm_sched_init() has a great many parameters and upcoming new functionality for the scheduler might add even more. Generally, the great number of parameters reduces readability and has already caused one missnaming, addressed in: commit 6f1cacf4eba7 ("drm/nouveau: Improve variable name in nouveau_sched_init()"). Introduce a new struct for the scheduler init parameters and port all users. Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Matthew Brost <matthew.brost@intel.com> # for Xe Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # for Panfrost and Panthor Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> # for Etnaviv Reviewed-by: Frank Binns <frank.binns@imgtec.com> # for Imagination Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> # for Sched Reviewed-by: Maíra Canal <mcanal@igalia.com> # for v3d Reviewed-by: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> # for amdxdna Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250211111422.21235-2-phasta@kernel.org
2025-02-06Merge drm/drm-next into drm-misc-nextMaxime Ripard
Bring rc1 to start the new release dev. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-23drm/v3d: Assign job pointer to NULL before signaling the fenceMaíra Canal
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion"), we introduced a change to assign the job pointer to NULL after completing a job, indicating job completion. However, this approach created a race condition between the DRM scheduler workqueue and the IRQ execution thread. As soon as the fence is signaled in the IRQ execution thread, a new job starts to be executed. This results in a race condition where the IRQ execution thread sets the job pointer to NULL simultaneously as the `run_job()` function assigns a new job to the pointer. This race condition can lead to a NULL pointer dereference if the IRQ execution thread sets the job pointer to NULL after `run_job()` assigns it to the new job. When the new job completes and the GPU emits an interrupt, `v3d_irq()` is triggered, potentially causing a crash. [ 466.310099] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 466.318928] Mem abort info: [ 466.321723] ESR = 0x0000000096000005 [ 466.325479] EC = 0x25: DABT (current EL), IL = 32 bits [ 466.330807] SET = 0, FnV = 0 [ 466.333864] EA = 0, S1PTW = 0 [ 466.337010] FSC = 0x05: level 1 translation fault [ 466.341900] Data abort info: [ 466.344783] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 466.350285] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 466.355350] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 466.360677] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000089772000 [ 466.367140] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 466.375875] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 466.382163] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash algif_skcipher af_alg bnep binfmt_misc vc4 snd_soc_hdmi_codec drm_display_helper cec brcmfmac_wcc spidev rpivid_hevc(C) drm_client_lib brcmfmac hci_uart drm_dma_helper pisp_be btbcm brcmutil snd_soc_core aes_ce_blk v4l2_mem2mem bluetooth aes_ce_cipher snd_compress videobuf2_dma_contig ghash_ce cfg80211 gf128mul snd_pcm_dmaengine videobuf2_memops ecdh_generic sha2_ce ecc videobuf2_v4l2 snd_pcm v3d sha256_arm64 rfkill videodev snd_timer sha1_ce libaes gpu_sched snd videobuf2_common sha1_generic drm_shmem_helper mc rp1_pio drm_kms_helper raspberrypi_hwmon spi_bcm2835 gpio_keys i2c_brcmstb rp1 raspberrypi_gpiomem rp1_mailbox rp1_adc nvmem_rmem uio_pdrv_genirq uio i2c_dev drm ledtrig_pattern drm_panel_orientation_quirks backlight fuse dm_mod ip_tables x_tables ipv6 [ 466.458429] CPU: 0 UID: 1000 PID: 2008 Comm: chromium Tainted: G C 6.13.0-v8+ #18 [ 466.467336] Tainted: [C]=CRAP [ 466.470306] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 466.476157] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 466.483143] pc : v3d_irq+0x118/0x2e0 [v3d] [ 466.487258] lr : __handle_irq_event_percpu+0x60/0x228 [ 466.492327] sp : ffffffc080003ea0 [ 466.495646] x29: ffffffc080003ea0 x28: ffffff80c0c94200 x27: 0000000000000000 [ 466.502807] x26: ffffffd08dd81d7b x25: ffffff80c0c94200 x24: ffffff8003bdc200 [ 466.509969] x23: 0000000000000001 x22: 00000000000000a7 x21: 0000000000000000 [ 466.517130] x20: ffffff8041bb0000 x19: 0000000000000001 x18: 0000000000000000 [ 466.524291] x17: ffffffafadfb0000 x16: ffffffc080000000 x15: 0000000000000000 [ 466.531452] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 466.538613] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffd08c527eb0 [ 466.545777] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 466.552941] x5 : ffffffd08c4100d0 x4 : ffffffafadfb0000 x3 : ffffffc080003f70 [ 466.560102] x2 : ffffffc0829e8058 x1 : 0000000000000001 x0 : 0000000000000000 [ 466.567263] Call trace: [ 466.569711] v3d_irq+0x118/0x2e0 [v3d] (P) [ 466.573826] __handle_irq_event_percpu+0x60/0x228 [ 466.578546] handle_irq_event+0x54/0xb8 [ 466.582391] handle_fasteoi_irq+0xac/0x240 [ 466.586498] generic_handle_domain_irq+0x34/0x58 [ 466.591128] gic_handle_irq+0x48/0xd8 [ 466.594798] call_on_irq_stack+0x24/0x58 [ 466.598730] do_interrupt_handler+0x88/0x98 [ 466.602923] el0_interrupt+0x44/0xc0 [ 466.606508] __el0_irq_handler_common+0x18/0x28 [ 466.611050] el0t_64_irq_handler+0x10/0x20 [ 466.615156] el0t_64_irq+0x198/0x1a0 [ 466.618740] Code: 52800035 3607faf3 f9442e80 52800021 (f9406018) [ 466.624853] ---[ end trace 0000000000000000 ]--- [ 466.629483] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 466.636384] SMP: stopping secondary CPUs [ 466.640320] Kernel Offset: 0x100c400000 from 0xffffffc080000000 [ 466.646259] PHYS_OFFSET: 0x0 [ 466.649141] CPU features: 0x100,00000170,00901250,0200720b [ 466.654644] Memory Limit: none [ 466.657706] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Fix the crash by assigning the job pointer to NULL before signaling the fence. This ensures that the job pointer is cleared before any new job starts execution, preventing the race condition and the NULL pointer dereference crash. Cc: stable@vger.kernel.org Fixes: e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Tested-by: Phil Elwell <phil@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250123012403.20447-1-mcanal@igalia.com
2025-01-23Merge v6.13 into drm-nextSimona Vetter
A regression was caused by commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion"), but this commit is not yet in next-fixes, fast-forward it. Note that this recreates Linus merge in 96c84703f1cf ("Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel") because I didn't want to backmerge a random point in the merge window. Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2025-01-16Merge tag 'drm-misc-fixes-2025-01-15' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.13: - itee-it6263 error handling fix. - Fix warn when unloading v3d. - Fix W=1 build for kunit tests. - Fix backlight regression for macbooks 5,1 in nouveau. - Handle YCbCr420 better in bridge code, with tests. - Fix cross-device fence handling in nouveau. - Fix BO reservation handling in vmwgfx. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a89adcd5-2042-4e7f-93f4-2b299bb1ef17@linux.intel.com
2025-01-14drm/v3d: Ensure job pointer is set to NULL after job completionMaíra Canal
After a job completes, the corresponding pointer in the device must be set to NULL. Failing to do so triggers a warning when unloading the driver, as it appears the job is still active. To prevent this, assign the job pointer to NULL after completing the job, indicating the job has finished. Fixes: 14d1d1908696 ("drm/v3d: Remove the bad signaled() implementation.") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
2025-01-14drm/v3d: Remove `v3d->cpu_job`Maíra Canal
CPU jobs, like Cache Clean jobs, execute synchronously once the DRM scheduler starts running them. Consequently, a global `v3d->cpu_job` variable is unnecessary, as everything is managed within the `v3d_cpu_job_run()` function. This commit removes the `v3d->cpu_job` pointer, as it is not needed. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-2-mcanal@igalia.com
2024-12-11drm/v3d: Fix miscellaneous documentation errorsMaíra Canal
This commit fixes several miscellaneous documentation errors. Mostly, delete/update comments that are outdated or are leftovers from past code changes. Apart from that, remove double-spaces in several comments. Signed-off-by: Maíra Canal <mcanal@igalia.com> Acked-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241206153908.62429-1-mcanal@igalia.com
2024-12-09Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
The v6.13-rc2 release included a bunch of breaking changes, specifically the MODULE_IMPORT_NS commit. Backmerge in order to fix them before the next pull-request. Include the fix from Stephen Roswell. Caused by commit 25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths") Interacting with commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2024-12-06Merge tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty quiet week which is probably expected after US holidays, the dma-fence and displayport MST message handling fixes make up the bulk of this, along with a couple of minor xe and other driver fixes. dma-fence: - Fix reference leak on fence-merge failure path - Simplify fence merging with kernel's sort() - Fix dma_fence_array_signaled() to ensure forward progress dp_mst: - Fix MST sideband message body length check - Fix a bunch of locking/state handling with DP MST msgs sti: - Add __iomem for mixer_dbg_mxn()'s parameter xe: - Missing init value and 64-bit write-order check - Fix a memory allocation issue causing lockdep violation v3d: - Performance counter fix" * tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel: drm/v3d: Enable Performance Counters before clearing them drm/dp_mst: Use reset_msg_rx_state() instead of open coding it drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req() drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req() drm/dp_mst: Fix down request message timeout handling drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep() drm/dp_mst: Verify request type in the corresponding down message reply drm/dp_mst: Fix resetting msg rx state after topology removal drm/xe: Move the coredump registration to the worker thread drm/xe/guc: Fix missing init value and add register order check drm/sti: Add __iomem for mixer_dbg_mxn's parameter drm/dp_mst: Fix MST sideband message body length check dma-buf: fix dma_fence_array_signaled v4 dma-fence: Use kernel's sort for merging fences dma-fence: Fix reference leak on fence merge failure path
2024-12-06Merge tag 'drm-misc-fixes-2024-12-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes v6.13-rc2: - v3d performance counter fix. - A lot of DP-MST related fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2ce1650d-801f-4265-a876-5a8743f1c82b@linux.intel.com
2024-12-05drm/v3d: Enable Performance Counters before clearing themMaíra Canal
On the Raspberry Pi 5, performance counters are not being cleared when `v3d_perfmon_start()` is called, even though we write to the CLR register. As a result, their values accumulate until they overflow. The expected behavior is for performance counters to reset to zero at the start of a job. When the job finishes and the perfmon is stopped, the counters should accurately reflect the values for that specific job. To ensure this behavior, the performance counters are now enabled before being cleared. This allows the CLR register to function as intended, zeroing the counter values when the job begins. Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
2024-12-05drm: remove driver date from struct drm_driver and all driversJani Nikula
We stopped using the driver initialized date in commit 7fb8af6798e8 ("drm: deprecate driver date") and (eventually) started returning "0" for drm_version ioctl instead. Finish the job, and remove the unused date member from struct drm_driver, its initialization from drivers, along with the common DRIVER_DATE macros. v2: Also update drivers/accel (kernel test robot) Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-04drm/v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBALChristian Gmeiner
Add a new ioctl, DRM_IOCTL_V3D_PERFMON_SET_GLOBAL, to allow configuration of a global performance monitor (perfmon). Use the global perfmon for all jobs to ensure consistent performance tracking across submissions. This feature is needed to implement a Perfetto datasources in user-space. Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241202140615.74802-1-christian.gmeiner@gmail.com
2024-12-01Get rid of 'remove_new' relic from platform driver structLinus Torvalds
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-22drm/v3d: Stop active perfmon if it is being destroyedChristian Gmeiner
If the active performance monitor (`v3d->active_perfmon`) is being destroyed, stop it first. Currently, the active perfmon is not stopped during destruction, leaving the `v3d->active_perfmon` pointer stale. This can lead to undefined behavior and instability. This patch ensures that the active perfmon is stopped before being destroyed, aligning with the behavior introduced in commit 7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed"). Cc: stable@vger.kernel.org # v5.15+ Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241118221948.1758130-1-christian.gmeiner@gmail.com
2024-11-11drm/v3d: Fix performance counter source settings on V3D 7.xMaíra Canal
When the new register addresses were introduced for V3D 7.x, we added new masks for performance counter sources on V3D 7.x. Nevertheless, we never apply these new masks when setting the sources. Fix the performance counter source settings on V3D 7.x by introducing a new macro, `V3D_SET_FIELD_VER`, which allows fields setting to vary by version. Using this macro, we can provide different values for source mask based on the V3D version, ensuring that sources are correctly configure on V3D 7.x. Fixes: 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106121736.5707-1-mcanal@igalia.com
2024-11-04Backmerge v6.12-rc6 of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus tree for some drm-fixes needed for msm and xe merges. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-10-30drm/v3d: Drop allocation of object without mountpointMatthias Brugger
Function drm_gem_shmem_create_with_mnt() creates an object without using the mountpoint if gemfs is NULL. Drop the else branch calling drm_gem_shmem_create(). Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029-v3d-v2-1-c0d3dd328d1b@gmail.com
2024-10-07drm/v3d: Stop the active perfmon before being destroyedMaíra Canal
When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. Cc: stable@vger.kernel.org # v5.15+ Closes: https://github.com/raspberrypi/linux/issues/6389 Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Juan A. Suarez <jasuarez@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004130625.918580-2-mcanal@igalia.com
2024-09-30Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-25drm/v3d: Expose Super Pages capabilityMaíra Canal
Add a new V3D parameter to expose the support of Super Pages to userspace. The userspace might want to know this information to apply optimizations that are specific to kernels with Super Pages enabled. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-12-mcanal@igalia.com
2024-09-25drm/v3d: Add modparam for turning off Big/Super PagesMaíra Canal
Add a modparam for turning off Big/Super Pages to make sure that if an user doesn't want Big/Super Pages enabled, it can disabled it by setting the modparam to false. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-11-mcanal@igalia.com
2024-09-25drm/v3d: Use gemfs/THP in BO creation if availableMaíra Canal
Although Big/Super Pages could appear naturally, it would be quite hard to have 1MB or 64KB allocated contiguously naturally. Therefore, we can force the creation of large pages allocated contiguously by using a mountpoint with "huge=within_size" enabled. Therefore, as V3D has a mountpoint with "huge=within_size" (if user has THP enabled), use this mountpoint for BO creation if available. This will allow us to create large pages allocated contiguously and make use of Big/Super Pages. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-10-mcanal@igalia.com
2024-09-25drm/v3d: Support Big/Super Pages when writing out PTEsMaíra Canal
The V3D MMU also supports 64KB and 1MB pages, called big and super pages, respectively. In order to set a 64KB page or 1MB page in the MMU, we need to make sure that page table entries for all 4KB pages within a big/super page must be correctly configured. In order to create a big/super page, we need a contiguous memory region. That's why we use a separate mountpoint with THP enabled. In order to place the page table entries in the MMU, we iterate over the 16 4KB pages (for big pages) or 256 4KB pages (for super pages) and insert the PTE. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-9-mcanal@igalia.com
2024-09-25drm/v3d: Reduce the alignment of the node allocationMaíra Canal
Currently, we are using an alignment of 128 kB to insert a node, which ends up wasting memory as we perform plenty of small BOs allocations (<= 4 kB). We require that allocations are aligned to 128Kb so for any allocation smaller than that, we are wasting the difference. This implies that we cannot effectively use the whole 4 GB address space available for the GPU in the RPi 4. Currently, we can allocate up to 32000 BOs of 4 kB (~140 MB) and 3000 BOs of 400 kB (~1,3 GB). This can be quite limiting for applications that have a high memory requirement, such as vkoverhead [1]. By reducing the page alignment to 4 kB, we can allocate up to 1000000 BOs of 4 kB (~4 GB) and 10000 BOs of 400 kB (~4 GB). Moreover, by performing benchmarks, we were able to attest that reducing the page alignment to 4 kB can provide a general performance improvement in OpenGL applications (e.g. glmark2). Therefore, this patch reduces the alignment of the node allocation to 4 kB, which will allow RPi users to explore the whole 4GB virtual address space provided by the hardware. Also, this patch allow users to fully run vkoverhead in the RPi 4/5, solving the issue reported in [1]. [1] https://github.com/zmike/vkoverhead/issues/14 Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-8-mcanal@igalia.com
generated by cgit (git 2.34.1) at 2025-08-02 15:04:55 +0000