summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2015-08-10i2c: tegra: add support for fast plus (FM+) mode clock rateLaxman Dewangan
Tegra I2C controller required to configure the clock divisor register inside controller to different value based on the clock speed. The recommended clock divisor for the I2C controller for standard/fast mode is 0x19 and for fast-mode plus is 0x10. Add support to configure clock divisor register of I2C controller based on bus clock rate. This clock divisor is supported form T114 onwards. Signed-off-by: Chaitanya Bandi <bandik@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: tegra: update CONFIG_LOAD for new conifigurationLaxman Dewangan
Once the new configuration is set on the conifg register of I2C controller, it is require to update the CONFIG_LOAD register to transfer the new SW configuration to actual HW internal registers that would be used in the actual logic. It is like, SW is programming only shadow registers through regular configuration and when these load_config bit fields are set to 1, it causes the regular/shadows registers configuration transferred to the HW internal active registers. So SW has to set these bit fields at the end of all regular registers configuration. And these config_load bits are HW auto-clear bits. HW clears these bit fields once the register configuration is moved to HW internal active registers. So SW has to wait until these bits are auto-cleared before going for any further programming This mechanism is supported on T124 and after this SoCs. Signed-off-by: Chaitanya Bandi <bandik@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: fix cleanup regressionWolfram Sang
Patch "i2c: omap: abolish variable name confusion" triggered a coccinelle warning which we fix here: drivers/i2c/busses/i2c-omap.c:1333:5-24: pm_runtime_get_sync returns < 0 as error. Unecessary IS_ERR_VALUE at line 1334 Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Do not continue in case of errors in RxShubhrajyoti Datta
In case of error conditions like Arbitration lost or NACK lets signal the waiting process. Handle error cases in the Rx path Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Service all interrupts in isrShubhrajyoti Datta
Currently only one interrupt is serviced in the isr. In case the multiple interrupts happen simultenously we service and ack only one of them. Check for all the causes in the isr and service them. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove the Addressed as slave interruptShubhrajyoti Datta
Currently there is no slave mode support in the driver also in the isr we just ack it and do nothing. So disable the AAS interrupt. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove busy loop while waiting for bus busyShubhrajyoti Datta
Remove the busy loop while waiting for bus busy. Instead let the processor sleep. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove the disabling of interruptsShubhrajyoti Datta
Currently before every transfer the interrupts are disabled. So incase the slave nacks in the middle of the transfer the current transfer is not aborted. Upon enabling the interrupts conditions like NACK , arbitration lost will not be masked. Remove the disabling of the interrupts. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Do not reset controller before every transferShubhrajyoti Datta
Currently before every transfer the controller is reinitialised. We are already resetting the controller upon errors so upon every transfer is a performance kill. Remove the same. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: move the xiic_process to thread contextShubhrajyoti Datta
The xiic_process is a 154 line code that runs in isr context currently move it to thread context. Also the name xiic_process suggests that the intension was to run in process context. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> [wsa: initialized irqreturn_t to IRQ_NONE instead of IRQ_HANDLED] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: xiic: Remove the disabling of interruptsShubhrajyoti Datta
Currently the interrupts are disabled at the start of the isr and enabled at the end of the isr. Remove the same. In case the slave device NACKs the transaction while in the isr the transfer will continue and the NACK interrupt will arrive only after the isr is serviced. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Use devm_ variants in probe functionVaibhav Hiremath
This patch cleans up i2c_pxa_probe() function, - Use devm_ variants wherever This will clean both probe exit and i2c_pxa_remove() functions - Check platform resource before parsing any other data from DT/platform - Use dev_err on failure from i2c_add_numbered_adapter() - Use pr_info instead of printk for KERN_INFO Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> [wsa: removed unneeded error prinout after devm_ioremap_resource] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Update debug function to dump more info on errorVaibhav Hiremath
Update i2c_pxa_scream_blue_murder() fn to print more information in case of error. Also, use dev_err variants instead of printk. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Fix compile warning in 64bit modeYipeng Yao
Fix below warning message, coming from 64 bit toolchain. drivers/i2c/busses/i2c-pxa.c:1237:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Yipeng Yao <ypyao@marvell.com> [vaibhav.hiremath@linaro.org: Updated Changelog] Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Cc: Wolfram Sang <wsa@the-dreams.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: Return I2C_RETRY when timeout in pio modeShouming Wang
In case of timeout in pio mode of operation return I2C_RETRY. This behavior will be same as interrupt mode of operation. Signed-off-by: Shouming Wang <wangshm@marvell.com> [vaibhav.hiremath@linaro.org: Updated changelog] Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: No need to set slave addr for i2c master mode resetVaibhav Hiremath
Normally i2c controller works as master, so slave addr is not needed, or it will impact some slave device (eg. ST NFC chip) i2c accesses, because it has the same i2c address with controller. For example, On the pxa1928 based platform, where PMIC (88pm860) is present @0x30 address on TWSI0 interface, and if we set 0x30 as a slave address in pxa1928 TWSI0 module, all the transactions towards PMIC would go for toss. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: pxa: keep i2c irq ON in suspendLeilei Shang
During suspend there may still be some i2c access happening, as the interrupt is shared between multiple drivers. And if we don't keep i2c irq ON, there may be i2c access timeout if i2c is in irq mode of operation. Signed-off-by: Raul Xiong <xjian@marvell.com> Signed-off-by: Xiaofan Tian <tianxf@marvell.com> [vaibhav.hiremath@linaro.org: updated Changelog] Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: emev2: add driverWolfram Sang
Add a basic driver for the Renesas EMEV2 SoC. Based on the driver from the BSP which was first worked on by Ian, and made ready for upstream by me. Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: on ->remove() call pm_runtime_put_sync()Felipe Balbi
we're about to remove the module, so we can't really schedule a PM transition in the future, we must wait for it to finish. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: abolish variable name confusionFelipe Balbi
struct device pointers are usually called dev. Calling our struct omap_i2c_dev pointers also dev has caused enough confusion. This is the result of a few simple sed rules to convert all struct omap_i2c_dev pointers to be called omap instead. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: omap: switch to dev_get_drvdata()Felipe Balbi
there's no need to fetch the platform_device in order to dereference it back to the dev pointer to access drvdata, we can use dev_get_drvdata() instead. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: parport: start using pr_fmtSudip Mukherjee
Start using pr_fmt and convert all remaining printk to use pr_* family of macros. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> [wsa: remove print on kzalloc failure] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: parport: use dev_*Sudip Mukherjee
Now parport is using device model so use dev_* macros instead of printk. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-01i2c: fix leaked device refcount on of_find_i2c_* error pathVladimir Zapolskiy
If of_find_i2c_device_by_node() or of_find_i2c_adapter_by_node() find a device by node, but its type does not match, a reference to that device is still held. This change fixes the problem. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-31i2c: Fix typo in i2c-bfin-twi.cMasanari Iida
This patch fix some typos found in a printk message and MODULE_DESCRIPTION. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-31i2c: omap: fix bus recovery setupJan Luebbe
At least on the AM335x, enabling OMAP_I2C_SYSTEST_ST_EN is not enough to allow direct access to the SCL and SDA pins. In addition to ST_EN, we need to set the TMODE to 0b11 (Loop back & SDA/SCL IO mode select). Also, as the reset values of SCL_O and SDA_O are 0 (which means "drive low level"), we need to set them to 1 (which means "high-impedance") to avoid unwanted changes on the pins. As a precaution, reset all these bits to their default values after recovery is complete. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-31i2c: core: only use set_scl for bus recovery after calling prepare_recoveryJan Luebbe
Using set_scl may be ineffective before calling the driver specific prepare_recovery callback, which might change into a test mode. So instead of setting SCL in i2c_generic_scl_recovery, move it to i2c_generic_recovery (after the optional prepare_recovery). Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-31i2c: slave eeprom: clean up sysfs bin attribute read()/write()Vladimir Zapolskiy
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Note, on file size overflow read() now returns 0, and this is a correct and expected EOF notification according to POSIX. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-09i2c: Mark instantiated device nodes with OF_POPULATEPantelis Antoniou
Mark (and unmark) device nodes with the POPULATE flag as appropriate. This is required to avoid multi probing when using I2C and device overlays containing a mux. This patch is also more careful with the release of the adapter device which caused a deadlock with muxes, and does not break the build on !OF since the node flag accessors are not defined then. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-09i2c: jz4780: Fix return value if probe failsAxel Lin
Current code returns 0 if fails to read clock-frequency DT property, fix it. Also add checking return value of clk_prepare_enable and propagate return value of devm_request_irq. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-09i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error pathAxel Lin
Free requested mailbox channel before return error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-07-09i2c: I2C_MT65XX should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "dma_unmap_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! ERROR: "dma_mapping_error" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! ERROR: "dma_map_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-26Merge tag 'char-misc-4.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include <linux/sizes.h> extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...
2015-06-25Merge branch 'i2c/for-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Mediatek I2C, APM X-Gene, Broadcom Settop - major updates to at91, davinci - bugfixes to the mux infrastructure when dealing with the new quirk mechanism - more users for the bus recovery feature - further improvements to the slave framework Plus the usual bunch of smaller driver and core improvements and fixes. There is one patch removing old code from an ARM platform. This has been acked by the sh_mobile maintainer Simon Horman" * 'i2c/for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (48 commits) i2c: busses: i2c-bcm2835: limits cdiv to allowed values i2c: sh_mobile: use proper type for timeout i2c: sh_mobile: use adapter default for timeout i2c: rcar: use proper type for timeout i2c: rcar: use adapter default for timeout i2c: designware: Make sure the device is suspended before disabling runtime PM i2c: tegra: apply size limit quirk i2c: tegra: don't advertise SMBUS_QUICK i2c: octeon: remove unused signal handling i2c: davinci: Optimize SCL generation i2c: mux: pca954x: Use __i2c_transfer because of quirks i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer() i2c: use parent adapter quirks in mux i2c: bcm2835: clear reserved bits in S-Register ARM: shmobile: r8a7740: remove I2C errata handling i2c: sh_mobile: add errata workaround i2c: at91: fix code checker warnings i2c: busses: xgene-slimpro: fix incorrect __init declation for probe i2c: davinci: Avoid sending to own address i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy() ...
2015-06-23Merge tag 'mfd-for-linus-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Constify structures; throughout the subsystem - Move support to DT in; cros_ec - DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063 - ACPI changes and documentation; mfd-core - Use different platform specific API in; cros_ec_*, arizona-core - Remove unused parent field from; cros_ec_i2c - Add wake-up/reset delay in; cross_ec_spi, arizona-core - Staticise structures/functions in; cros_ec - Remove redundant code; arizona-core, max77686 - Bugfix; twl4030-power - Allow compile test; aat2870, tps65910 - MAINTAINERS adaptions; samsung, syscon - Resource Management (devm_*); arizona-core - Refactor Reset code; arizona-core - Insist on at least one full boot; arizona-core - Trivial formatting; arizona-core - Add low-power-sleep; arizona-core - IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld, wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c (Re-)moved drivers: - Move protocol helpers out to drivers/platform; cros_ec New drivers/supported devices: - Add support for AXP22x into axp20x - Add support for OnKey into da9063-core - Add support for Pinctrl into mt6397-core - New STMicroelectronics LPC Watchdog driver - New STMicroelectronics LPC Real-Time Clock driver" * tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits) mfd: lpc_ich: Assign subdevice ids automatically mfd: si476x-i2c: Pass the IRQF_ONESHOT flag mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag mfd: wm8350-core: Pass the IRQF_ONESHOT flag mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag mfd: twl4030-irq: Pass the IRQF_ONESHOT flag mfd: mt6397-core: Add GPIO sub-module support mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime mfd: dt: Add bindings for DA9063 OnKey mfd: da9063: Add support for OnKey driver mfd: arizona: Fix incorrect Makefile conditionals mfd: arizona: Add stub for wm5102_patch() mfd: Check ACPI device companion before checking resources Documentation: Add WM8998/WM1814 device tree bindings mfd: arizona: Split INx_MODE into two fields mfd: wm5110: Add delay before releasing reset line mfd: arizona: Add better support for system suspend ...
2015-06-23Merge tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "Here are the changes for MMC for v4.2. MMC core: - Fix an error path in the mmc block layer - Fix PM domain attachment for the SDIO bus - Add support for driver strength selection - Increase a delay to let voltage stabilize - Add support for disabling write-protect detection - Add facility to support re-tuning - Re-tune and retry in the recovery path - Add reset option for SDIO - Consolidations and clean-ups MMC host: - Add Mediatek MMC driver - Constify platform_device_id for a couple of hosts - Fix modalias to make module auto-loading work for a couple of hosts - sdhci: Add support for sdhci-arasan4.9a - sdhci: Fix low memory corruption - sdhci: Restore behavior while creating OCR mask - sdhci: Add a callback to select drive strength - sdhci: Fix driver type B and D handling - sdhci: Add support for drive strength selection for SPT - sdhci: Enable HS400 for some Intel host controllers - sdhci: Convert to use the new re-tuning facility - sdhci: Various minor fixes and clean-ups - dw_mmc: Add support for hi6220 - dw_mmc: Use core to handle absent write protect line - dw_mmc: Add support to switch voltage - tmio: Some fixes and modernizations - sh_mmcif: Improve clock rate calculation" * tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc: (98 commits) mmc: queue: prevent soft lockups on PREEMPT=n mmc: mediatek: Add PM support for MMC driver mmc: mediatek: Add Mediatek MMC driver mmc: dt-bindings: add Mediatek MMC bindings mmc: card: Fixup request missing in mmc_blk_issue_rw_rq mmc: sdhci: fix low memory corruption mmc: sdhci-pci: Change AMD SDHCI quirk application scope i2c-piix4: Use Macro for AMD CZ SMBus device ID pci_ids: Add AMD KERNCZ device ID support mmc: queue: use swap() in mmc_queue_thread() mmc: dw_mmc: insmod followed by rmmod will hung for eMMC mmc: sdhci: Restore behavior while creating OCR mask mmc: sdhci-pxav3: fix device wakeup initialization mmc: core: Attach PM domain prior probing of SDIO func driver mmc: core: Remove redundant ->power_restore() callback for SD mmc: core: Remove redundant ->power_restore() callback for MMC mmc: sdhci-bcm2835: Actually enable the clock mmc: sdhci-bcm2835: Clean up platform allocations if sdhci init fails. mmc: sdhci-of-esdhc: enable interrupt mode to detect card mmc: sdhci-esdhc-imx: add quirk SDHCI_QUIRK2_BROKEN_HS200 for imx6qdl ...
2015-06-23Merge tag 'gpio-v4.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio updates from Linus Walleij: "This is the big bulk of GPIO changes queued for the v4.2 kernel series: - a big set of cleanups to the aged sysfs interface from Johan Hovold. To get these in, v4.1-rc3 was merged into the tree as the first patch in that series had to go into stable. This makes the locking much more fine-grained (get rid of the "big GPIO lock(s)" and store states in the GPIO descriptors. - rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to avoid confusions. - New drivers for: * NXP LPC18xx (currently LPC1850) * NetLogic XLP * Broadcom STB SoC's * Axis ETRAXFS * Zynq Ultrascale+ (subdriver) - ACPI: * make it possible to retrieve GpioInt resources from a GPIO device using acpi_dev_gpio_irq_get() * merge some dependent I2C changes exploiting this. * support the ARM X-Gene GPIO standby driver. - make it possible for the generic GPIO driver to read back the value set registers to reflect current status. - loads of OMAP IRQ handling fixes. - incremental improvements to Kona, max732x, OMAP, MXC, RCAR, PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x. - janitorial (constification, checkpatch cleanups)" * tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: Fix checkpatch.pl issues gpio: pcf857x: handle only enabled irqs gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use gpio: improve error reporting on own descriptors gpio: promote own request failure to pr_err() gpio: Added support to Zynq Ultrascale+ MPSoC gpio: add ETRAXFS GPIO driver fix documentation after renaming gpiod_set_array to gpiod_set_array_value gpio: Add GPIO support for Broadcom STB SoCs gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver gpio: tb10x: Drop unneeded free_irq() call gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip gpio: stp-xway: Use the of_property_read_u32 helper gpio: pcf857x: Check for irq_set_irq_wake() failures gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs gpio: Prevent an integer overflow in the pca953x driver gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly gpio: omap: rework omap_gpio_request to touch only gpio specific registers gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers ...
2015-06-23i2c: busses: i2c-bcm2835: limits cdiv to allowed valuesSilvan Wicki
Checks if the cdiv value is in between min (0x2) and max (0xFFFE) supported values by the bcm2835. If not, it returns -ENODEV. See page 33/34 of BCM2835-ARM-Peripherals.pdf for the DIV register. https://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Signed-off-by: Silvan Wicki <linux_wi@tinag.ch> [wsa: resolved a merge conflict] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-23i2c: sh_mobile: use proper type for timeoutWolfram Sang
wait_event_timeout returns long, not int. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-23i2c: sh_mobile: use adapter default for timeoutWolfram Sang
5 seconds is a very large timeout, and it is hardcoded. Use the default timeout from 'struct adapter' which is 1 second. It can also be modified from userspace for specific workloads via i2c-dev. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-23i2c: rcar: use proper type for timeoutWolfram Sang
wait_event_timeout returns long, not int. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-23i2c: rcar: use adapter default for timeoutWolfram Sang
5 seconds is a very large timeout, and it is hardcoded. Use the default timeout from 'struct adapter' which is 1 second. It can also be modified from userspace for specific workloads via i2c-dev. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-21i2c: designware: Make sure the device is suspended before disabling runtime PMMika Westerberg
The driver calls pm_runtime_put() right before pm_runtime_disable() in its ->remove() hook to make sure clock is gated etc. However, it turns out that pm_runtime_put() only calls ->idle() hook without actually suspending anything. The following pm_runtime_disable() will prevent the driver from suspending thus leaving it "active". It is better to suspend the device synchronously to make sure it is actually suspended before disabling runtime PM from it. While there, undo call to pm_runtime_use_autosuspend(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-21i2c: tegra: apply size limit quirkWolfram Sang
payload_size is a 12 bit field in the HW register, so add a limit for this size. That way we gracefully reject the message beforehand instead of generating an OOPS while transferring. Verified using some older Tegra2 documentation and a more recent Jetson TK1 board. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
2015-06-21i2c: tegra: don't advertise SMBUS_QUICKWolfram Sang
This HW cannot send 0-byte-length messages and the driver discards them. So, we should not advertise SMBUS_QUICK. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-17i2c: octeon: remove unused signal handlingNicholas Mc Guire
'commit 2637e5fd232d ("i2c: octeon: Fix i2c fail problem when a process is terminated by a signal")' removed the wait_event_interruptible_timeout to prevent half/mixed i2c messages from being sent/recievd but forgot to drop the signal handling case in the return handling. This just removes this dead code. While at it the return variable is adjusted to the type expected. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-17i2c: davinci: Optimize SCL generationAlexander Sverdlin
There are several cases where current clock configuration algorithm produces not optimal results: - truncation in "clk" calculation leads to the fact that actual BUS frequency will be always higher than spec except two exact module frequences 8MHz and 12MHz in the whole 7-12MHz range of permitted frequences - driver configures SCL HIGH to LOW ratio always 1 to 1 and this doesn't work well in 400kHz case, namely minimum time of LOW state (according to I2C Spec 2.1) 1.3us will not be fulfilled. HIGH to LOW ratio 1 to 2 would be more approriate here. Signed-off-by: Michael Lawnick <michael.lawnick@nokia.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-17i2c: mux: pca954x: Use __i2c_transfer because of quirksAlexander Sverdlin
pca9541 and pca954x are calling master_xfer() of the parent adapter directly thus bypassing the quirks checks of the adapter. Use __i2c_transfer() instead. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Łukasz Gemborowski <lukasz.gemborowski@nokia.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Fixes: b7f625840267b1 ("i2c: add quirk checks to core")
2015-06-17i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer()Alexander Sverdlin
Newly introduced quirks infrastructure doesn't work for the devices behind MUXes because MUX's master_xfer() calls parent's master_xfer() directly without checking the quirks. Instead of duplicating check code in MUX just call __i2c_transfer() instead. This has a side effect on tracing (messages will appear on both MUX bus and parent bus), but maybe that's not bad at the end. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Łukasz Gemborowski <lukasz.gemborowski@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Fixes: b7f625840267b1 ("i2c: add quirk checks to core")
2015-06-17i2c: use parent adapter quirks in muxAlexander Sverdlin
Inherit parent adapter quirks in MUX in case the devices on the multiplexed buses are interested in the adapter limitations. Signed-off-by: Łukasz Gemborowski <lukasz.gemborowski@nokia.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Fixes: b7f625840267b1 ("i2c: add quirk checks to core")
generated by cgit (git 2.34.1) at 2025-09-14 11:59:16 +0000