summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard/matrix_keypad.c
AgeCommit message (Collapse)Author
2025-04-09Input: matrix_keypad - detect change during scanMarkus Burri
For a setup where the matrix keypad is connected over a slow interface (e.g. a gpio-expansion over i2c), the scan can take a longer time to read. Interrupts need to be disabled during scan. And therefore changes in this period are not detected. To improve this situation, scan the matrix again if the row state changed during interrupts disabled. The rescan is repeated until no change is detected anymore. Signed-off-by: Markus Burri <markus.burri@mt.com> Link: https://lore.kernel.org/r/20250226152843.43932-4-markus.burri@mt.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-04-09Input: matrix_keypad - add function for reading row stateMarkus Burri
Move the evaluation of a row state into separate function. It will be also used by a change later in this series. Signed-off-by: Markus Burri <markus.burri@mt.com> Reviewed-by: Manuel Traut <manuel.traut@mt.com> Link: https://lore.kernel.org/r/20250226152843.43932-2-markus.burri@mt.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-02-25Input: matrix_keypad - use fsleep for delays after activating columnsMarkus Burri
The delay is specified in a device property, so the duration can be arbitrarily large. fsleep() determines the best way of delaying (sleep vs spin) based on duration. see Documentation/timers/delay_sleep_functions.rst Signed-off-by: Markus Burri <markus.burri@mt.com> Reviewed-by: Manuel Traut <manuel.traut@mt.com> Link: https://lore.kernel.org/r/20250110054906.354296-2-markus.burri@mt.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-02-25Input: matrix_keypad - add settle time after enabling all columnsMarkus Burri
Matrix keypads with high capacity need a longer settle time after enabling all columns before re-enabling interrupts. The delay gives the system time to settle and avoids spurious interrupts. Add a new optional device property to configure the delay after enabling all columns. The default is no delay. Signed-off-by: Markus Burri <markus.burri@mt.com> Reviewed-by: Manuel Traut <manuel.traut@mt.com> Link: https://lore.kernel.org/r/20250110054906.354296-7-markus.burri@mt.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-10-04Input: matrix_keypad - remove duplicated includeYang Li
The header files consumer.h is included twice in matrix_keypad.c, so one inclusion of each can be removed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10823 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20240910010133.44579-1-yang.lee@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-10-03Input: matrix_keypad - use guard notation when acquiring spinlockDmitry Torokhov
This makes the code more compact and error handling more robust by ensuring that locks are released in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/20240825051627.2848495-12-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-05Input: matrix_keypad - remove support for platform dataDmitry Torokhov
There are no more users of struct matrix_keypad_platform_data in the kernel, remove support for it from the driver. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240805014710.1961677-6-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-05Input: matrix_keypad - switch to gpiod API and generic device propertiesDmitry Torokhov
gpiod API and generic device properties work with software nodes and static properties, which will allow removing platform data support from the driver, simplifying and streamlining the code. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240805014710.1961677-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-09-05Input: matrix_keypad - remove support for clustered interruptDmitry Torokhov
There are no users of this functionality in the mainline kernel (it was only available to boards using platform data and not device tree). Remove it to simplify the code. Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240805014710.1961677-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-06Input: matrix_keypad - remove an unused field in struct matrix_keypadChristophe JAILLET
In "struct matrix_keypad", the 'gpio_all_disabled' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4f1a946789445500b6118b9ee1d6ef5255f8c696.1714542052.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - switch to using managed resourcesDmitry Torokhov
Switch the drivers to use managed resources (devm) to simplify error handling and remove the need to have remove() implementation. Link: https://lore.kernel.org/r/20240121053232.276968-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - consolidate handling of clustered interruptDmitry Torokhov
Now that the driver stores interrupt numbers corresponding to individual GPIOs in non-clustered mode, it is possible to unify handling of both modes by storing clustered interrupt at position 0 and setting the number of interrupts in this case to 1. Link: https://lore.kernel.org/r/20240121053232.276968-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - avoid repeatedly converting GPIO to IRQDmitry Torokhov
There is no need to do conversion from GPIOs to interrupt numbers. Convert row GPIOs to interrupt numbers once in probe() and use this information when the driver needs to enable or disable given interrupt line. Link: https://lore.kernel.org/r/20240121053232.276968-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-09-23Input: matrix_keypad - convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230920125829.1478827-6-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144708.1542751-1-robh@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-07Input: matrix-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the ifdef guards. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20221204180841.2211588-16-jic23@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-11-03Input: matrix_keypad - force switch rows to input modeSiarhei Volkau
Some Pin/GPIO controllers can't get current GPIO status when interrupt mode is set. Specifically Ingenic's JZ4755 always returns status at the moment of interrupt. The patch tries to fix that by forcibly setting pin mode to GPIO input prior to reading actual row status. enable_row_irqs seems to set interrupt mode back as it should be. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Link: https://lore.kernel.org/r/20221102165747.1528988-1-lis8215@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-23Input: matrix_keypad - add missed header inclusionAndy Shevchenko
The gpiod_count() API is defined in gpio/consumer.h. Include it. Fixes: f8f7f47d576f ("Input: matrix_keypad - replace of_gpio_named_count() by gpiod_count()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220923184632.2157-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-30Input: matrix_keypad - replace of_gpio_named_count() by gpiod_count()Andy Shevchenko
As a preparation to unexport of_gpio_named_count(), convert the driver to use gpiod_count() instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220830183552.50695-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-09Input: matrix_keypad - use flush_delayed_work()Dmitry Torokhov
We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-11-12Input: matrix_keypad - check for errors from of_get_named_gpio()Christian Hoff
"of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff <christian_hoff@gmx.net> Suggested-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-09Input: matrix_keypad - fix race when disabling interruptsZhang Bo
If matrix_keypad_stop() is executing and the keypad interrupt is triggered, disable_row_irqs() may be called by both matrix_keypad_interrupt() and matrix_keypad_stop() at the same time, causing interrupts to be disabled twice and the keypad being "stuck" after resuming. Take lock when setting keypad->stopped to ensure that ISR will not race with matrix_keypad_stop() disabling interrupts. Signed-off-by: Zhang Bo <zbsdta@126.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-29Input: matrix_keypad - add option to drive inactive columnsDavid Rivshin
The gpio-matrix-keypad driver normally sets inactive columns as inputs while scanning. This does not work for all hardware, which may require the inactive columns to be actively driven in order to overcome any pull-ups/downs on the columns. Signed-off-by: David Rivshin <drivshin@allworx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: keyboard - drop unnecessary calls to device_init_wakeupGuenter Roeck
Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Input: matrix_keypad - change name of wakeup property to "wakeup-source"Dmitry Torokhov
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-20input: keyboard: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-09Input: matrix_keypad - use request_any_context_irq()Lothar Waßmann
When trying to use the matrix-keypad driver with GPIO drivers that require nested irq handlers (e.g. I2C GPIO adapters like PCA9554), request_irq() fails because the GPIO driver requires a threaded interrupt handler. Use request_any_context_irq() to be able to use any GPIO driver as keypad driver. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-06Input: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-08Input: matrix_keypad - remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()Grant Likely
This patch replaces the horribly coded of_count_named_gpios() with a call to of_count_phandle_with_args() which is far more efficient. This also changes the return value of of_gpio_count() & of_gpio_named_count() from 'unsigned int' to 'int' so that it can return an error code. All the users of that function are fixed up to correctly handle a negative return value. v2: Split GPIO portion into a separate patch Tested-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com>
2012-11-24Input: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-20Input: matrix-keypad - add device tree supportAnilKumar Ch
Also the driver was modifued to take advantage of recent improvements in matrix_keypad_build_keymap() implementation, which automatically allocates memory for keymap. The driver was tested on AM335x EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-05-10Input: matrix-keymap - uninline and prepare for device tree supportDmitry Torokhov
Change matrix-keymap helper to be out-of-line, like sparse keymap, allow the helper perform basic keymap validation and return errors, and prepare for device tree support. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-20Input: matrix-keypad - undo GPIO setup if input_register_device failsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-20Input: matrix-keypad - allocate keycodes with keypad structureDmitry Torokhov
Instead of allocating and managing keymap separately from the keypad structure stick it at the end as a variable-length array. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-20Input: matrix-keypad - fix 'duplicate const' sparse warningDmitry Torokhov
SIMPLE_DEV_PM_OPS already defines constant dev_pm_ops. Also guard PM methods with CONFIG_PM_SLEEP and get rid of some unneeded #ifdefs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-30Input: keyboard - use macro module_platform_driver()JJ Ding
Commit 940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to save some platform_driver boilerplate code. Use it. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Input: remove IRQF_DISABLED from driversYong Zhang
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-10Input: matrix_keypad - add support for clustered irqLuotao Fu
This one adds support of a combined irq source for the whole matrix keypad. This can be useful if all rows and columns of the keypad are e.g. connected to a GPIO expander, which only has one interrupt line for all events on every single GPIO. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - switch mode upon system resume Revert "Input: wacom - merge out and in prox events" Input: matrix_keypad - allow platform to disable key autorepeat Input: ALPS - add signature for HP Pavilion dm3 laptops Input: i8042 - spelling fix Input: sparse-keymap - implement safer freeing of the keymap Input: update the status of the Multitouch X driver project Input: clarify the no-finger event in multitouch protocol Input: bcm5974 - retract efi-broken suspend_resume Input: sparse-keymap - free the right keymap on error
2010-04-05Input: matrix_keypad - allow platform to disable key autorepeatH Hartley Sweeten
In an embedded system the matrix_keypad driver might be used to interface with an external control panel and not an actual keyboard. On the control panel some of the keys could be used to turn on/off various functions. If key autorepeat is enabled this causes the function to quickly toggle between the on and off states and makes operation difficult. Add an option in the platform-specific data to disable the key autorepeat. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-24Input: matrix-keypad - handle cases when GPIOs can't be wakeup sourcesDmitry Torokhov
On certain boards not all GPIOs may be used as wakeup sources, in which case some of enable_irq_wake() calls will fail. On resume calling disable_irq_wake() will warn about unbalanced IRQ wake disable. Solve this by checking whether enable_irq_wake() succeeded or not and no not call disable_irq_wake() for these GPIOs/IRQs that have not been enabled. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-03Input: matrix-keypad - switch to using dev_pm_opsDmitry Torokhov
Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-27Input: matrix-keypad - add function to build device keymapDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit (git 2.34.1) at 2025-07-25 22:48:28 +0000