summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/brcmnand
AgeCommit message (Collapse)Author
2025-05-26mtd: rawnand: brcmnand: legacy exec_op implementationÁlvaro Fernández Rojas
Commit 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation") removed legacy interface functions, breaking < v5.0 controllers support. In order to fix older controllers we need to add an alternative exec_op implementation which doesn't rely on low level registers. Fixes: 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: David Regan <dregan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-05-23mtd: nand: brcmnand: fix NAND timeout when accessing eMMCDavid Regan
When booting a board to NAND and accessing NAND while eMMC transactions are occurring the NAND will sometimes timeout. This is due to both NAND and eMMC controller sharing the same data bus on BCMBCA chips. Fix is to extend NAND timeout to allow eMMC transactions time to complete. Signed-off-by: David Regan <dregan@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-05-16mtd: rawnand: brcmnand: remove unused parametersÁlvaro Fernández Rojas
last_cmd and last_byte are now unused brcmnand_host members. last_addr is only written and never read so we can remove it too. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-03-04mtd: rawnand: brcmnand: fix PM resume warningKamal Dasu
Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nand_reset() implies more than just setting the cs field op->cs, it also reconfigures the data interface (ie. the timings). Tested and confirmed the NAND chip is in sync timing wise with host after the fix. Fixes: 97d90da8a886 ("mtd: nand: provide several helpers to do common NAND operations") Cc: stable@vger.kernel.org Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2024-12-24mtd: rawnand: brcmnand: fix status read of brcmnand_waitfuncdavid regan
This change fixes an issue where an error return value may be mistakenly used as NAND status. Fixes: f504551b7f15 ("mtd: rawnand: Propagate error and simplify ternary operators for brcmstb_nand_wait_for_completion()") Signed-off-by: david regan <dregan@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2024-11-21Merge tag 'nand/for-6.13' into mtd/nextMiquel Raynal
SPI-NAND changes: A load of fixes to Winbond manufacturer driver have been done, plus a structure constification. Raw NAND changes: The GPMI driver has been improved on the power management side. The Davinci driver has been cleaned up. A leak in the Atmel driver plus some typos in the core have been fixed.
2024-10-21mtd: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/mtd to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20241007205803.444994-10-u.kleine-koenig@baylibre.com
2024-10-21mtd: rawnand: Correct multiple typos in commentsShen Lichuan
Fixed some confusing spelling errors, the details are as follows: -in the code comments: remaing -> remaining alingment -> alignment capabilitiies -> capabilities operatoin -> operation decriptors -> descriptors stareted -> started Unfortunelly -> Unfortunately compatabable -> compatible depenent -> dependent Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240923065649.11966-1-shenlichuan@vivo.com
2024-03-25mtd: rawnand: brcmnand: Fix data access violation for STB chipWilliam Zhang
Florian reported the following kernel NULL pointer dereference issue on a BCM7250 board: [ 2.829744] Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [ 2.838740] [0000000c] *pgd=80000000004003, *pmd=00000000 [ 2.844178] Internal error: Oops: 206 [#1] SMP ARM [ 2.848990] Modules linked in: [ 2.852061] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.8.0-next-20240305-gd95fcdf4961d #66 [ 2.860436] Hardware name: Broadcom STB (Flattened Device Tree) [ 2.866371] PC is at brcmnand_read_by_pio+0x180/0x278 [ 2.871449] LR is at __wait_for_common+0x9c/0x1b0 [ 2.876178] pc : [<c094b6cc>] lr : [<c0e66310>] psr: 60000053 [ 2.882460] sp : f0811a80 ip : 00000012 fp : 00000000 [ 2.887699] r10: 00000000 r9 : 00000000 r8 : c3790000 [ 2.892936] r7 : 00000000 r6 : 00000000 r5 : c35db440 r4 : ffe00000 [ 2.899479] r3 : f15cb814 r2 : 00000000 r1 : 00000000 r0 : 00000000 The issue only happens when dma mode is disabled or not supported on STB chip. The pio mode transfer calls brcmnand_read_data_bus function which dereferences ctrl->soc->read_data_bus. But the soc member in STB chip is NULL hence triggers the access violation. The function needs to check the soc pointer first. Fixes: 546e42599120 ("mtd: rawnand: brcmnand: Add BCMBCA read data bus interface") Reported-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240320222623.35604-1-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: Add support for getting ecc setting from strapWilliam Zhang
BCMBCA broadband SoC based board design does not specify ecc setting in dts but rather use the SoC NAND strap info to obtain the ecc strength and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for this purpose and update driver to support this option. However these two options can not be used at the same time. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240301173308.226004-1-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: fix sparse warningsWilliam Zhang
Fix the following sparse warnings: sparse warnings: (new ones prefixed by >>) >> drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:79:41: sparse: sparse: cast removes address space '__iomem' of expression drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse: cast removes address space '__iomem' of expression drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse: cast removes address space '__iomem' of expression drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse: cast removes address space '__iomem' of expression Fixes: c52c16d1bee5 ("mtd: rawnand: brcmnand: Add BCMBCA read data bus interface") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402270940.gmVLVRg0-lkp@intel.com/ Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240227190258.200929-1-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: Support write protection setting from dtsWilliam Zhang
The write protection feature is controlled by the module parameter wp_on with default set to enabled. But not all the board use this feature especially in BCMBCA broadband board. And module parameter is not sufficient as different board can have different option. Add a device tree property and allow this feature to be configured through the board dts on per board basis. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-14-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: Add BCMBCA read data bus interfaceWilliam Zhang
The BCMBCA broadband SoC integrates the NAND controller differently than STB, iProc and other SoCs. It has different endianness for NAND cache data. Add a SoC read data bus shim for BCMBCA to meet the specific SoC need and performance improvement using the optimized memcpy function on NAND cache memory. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-12-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: Rename bcm63138 nand driverWilliam Zhang
In preparing to support multiple BCMBCA SoCs, rename bcm63138 to bcmbca in the driver code and driver file name. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-11-william.zhang@broadcom.com
2024-02-26mtd: rawnand: brcmnand: update log level messagesDavid Regan
Update log level messages so that more critical messages can be logged to console and help the troubleshooting with field devices. Signed-off-by: David Regan <dregan@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-4-william.zhang@broadcom.com
2024-02-26mtd: rawnand: brcmnand: fix style issuesWilliam Zhang
Fix various style issues. Signed-off-by: David Regan <dregan@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-3-william.zhang@broadcom.com
2024-02-26mtd: rawnand: brcmnand: exec_op helper functions return type fixesDavid Regan
Fix return types for exec_op reset and status helper functions. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: http://lists.infradead.org/pipermail/linux-mtd/2023-December/102423.html Fixes: 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation") Signed-off-by: David Regan <dregan@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-2-william.zhang@broadcom.com
2023-12-04mtd: rawnand: brcmnand: exec_op implementationDavid Regan
exec_op implementation for Broadcom STB, Broadband and iProc SoC This adds exec_op and removes the legacy interface. Based on changes proposed by Boris Brezillon. Link: https://github.com/bbrezillon/linux/commit/4ec6f8d8d83f5aaca5d1877f02d48da96d41fcba Link: https://github.com/bbrezillon/linux/commit/11b4acffd761c4928652d7028d19fcd6f45e4696 Signed-off-by: David Regan <dregan@broadcom.com> [Miquel Raynal: Misc style fixes] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-4-dregan@broadcom.com
2023-12-04mtd: rawnand: brcmnand: pass host struct to bcmnand_ctrl_poll_statusDavid Regan
Pass host struct to bcmnand_ctrl_poll_status instead of ctrl struct since real time status requires host, and ctrl is a member of host. Real time status is required for low level commands vs cached status since the NAND controller will not do an automatic status read at the end of a low level command as it would with a high level command. Signed-off-by: David Regan <dregan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-3-dregan@broadcom.com
2023-11-13mtd: rawnand: brcmnand: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). By changing the function brcmnand_remove() to return void several drivers that use this function as remove callback can be converted to .remove_new(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231102220246.3336154-7-u.kleine-koenig@pengutronix.de
2023-08-18mtd: rawnand: Propagate error and simplify ternary operators for ↵Ruan Jinjie
brcmstb_nand_wait_for_completion() As bcmnand_ctrl_poll_status() return negative errno, so return true if sts < 0. The < 0 case does not exist for wait_for_completion_timeout(), so return true if sts = 0 and zero otherwise. Both of the true return of them can be considered as a -ETIMEDOUT err, so return -ETIMEDOUT if err is true to propagate err from its caller. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230808032943.3890545-1-ruanjinjie@huawei.com
2023-08-04mtd: rawnand: brcmnand: Use devm_platform_ioremap_resource_byname()Li Zetao
Convert platform_get_resource_byname() + devm_ioremap_resource() to a single call to devm_platform_ioremap_resource_byname(), as this is exactly what this function does. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230802013500.1030853-1-lizetao1@huawei.com
2023-07-27mtd: rawnand: brcmnand: propagate init error -EPROBE_DEFER upRafał Miłecki
MTD subsystem may return -EPROBE_DEFER if something isn't ready yet. It's important to pass that error up so device will get probed later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230719084324.14799-1-zajec5@gmail.com
2023-07-12mtd: rawnand: brcmnand: Fix mtd oobsizeWilliam Zhang
brcmnand controller can only access the flash spare area up to certain bytes based on the ECC level. It can be less than the actual flash spare area size. For example, for many NAND chip supporting ECC BCH-8, it has 226 bytes spare area. But controller can only uses 218 bytes. So brcmand driver overrides the mtd oobsize with the controller's accessible spare area size. When the nand base driver utilizes the nand_device object, it resets the oobsize back to the actual flash spare aprea size from nand_memory_organization structure and controller may not able to access all the oob area as mtd advises. This change fixes the issue by overriding the oobsize in the nand_memory_organization structure to the controller's accessible spare area size. Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-6-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob writeWilliam Zhang
When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-5-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix crash during the panic_writeWilliam Zhang
When executing a NAND command within the panic write path, wait for any pending command instead of calling BUG_ON to avoid crashing while already crashing. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Kursad Oney <kursad.oney@broadcom.com> Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-4-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix potential false time out warningWilliam Zhang
If system is busy during the command status polling function, the driver may not get the chance to poll the status register till the end of time out and return the premature status. Do a final check after time out happens to ensure reading the correct status. Fixes: 9d2ee0a60b8b ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-3-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controllerWilliam Zhang
v7.2 controller has different ECC level field size and shift in the acc control register than its predecessor and successor controller. It needs to be set specifically. Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com
2022-09-21mtd: rawnand: brcmnand: Add individual glue driver selectionFlorian Fainelli
Allow each platform to define a dedicated Kconfig entry for its glue driver such that we can decide on a per-platfomr basis whether to build it or not. This allows for a finer grained control over the resulting kernel image or set of modules. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-3-f.fainelli@gmail.com
2022-09-21mtd: rawnand: brcmnand: Move Kconfig to driver folderFlorian Fainelli
In preparation for allowing each of the brcmnand stub to be built separately, move the Kconfig entry to the driver folder. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-2-f.fainelli@gmail.com
2022-03-23Merge tag 'nand/for-5.18' into mtd/nextMiquel Raynal
Raw NAND core changes: * Rework of_get_nand_bus_width() * Remove of_get_nand_on_flash_bbt() wrapper * Protect access to rawnand devices while in suspend * bindings: Document the wp-gpios property Rax NAND controller driver changes: * atmel: Fix refcount issue in atmel_nand_controller_init * nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc * rockchip: Fix platform_get_irq.cocci warning * stm32_fmc2: Add NAND Write Protect support * pl353: Set the nand chip node as the flash node * brcmnand: Fix sparse warnings in bcma_nand * omap_elm: Remove redundant variable 'errors' * gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting * brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: * Check for error irq Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-18Merge tag 'spi-nor/for-5.18' into mtd/nextMiquel Raynal
SPI NOR core changes: - move vendor specific code out of the core into vendor drivers. - unify all function and object names in the vendor modules. - make setup() callback optional to improve readability. - skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-01-31mtd: rawnand: Fix misuses of of_match_node()Miquel Raynal
On non-OF enabled platforms (CONFIG_OF is not set), of_match_node() will expand to NULL. The of_device_id array pointed by the macro will then be left unused. Let's mark the array __maybe_unused in this case to prevent compiler warnings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/linux-mtd/20220127110802.1064963-1-miquel.raynal@bootlin.com
2022-01-31mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC statusdavid regan
The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan <dregan@mail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02
2022-01-26mtd: rawnand: brcmnand: Fix sparse warnings in bcma_nandFlorian Fainelli
sparse was unhappy about the way we woulc call cpu_to_be32/be32_to_cpu, apply the appropriate casting to silence the warnings. Reported-by: kernel test robot <lkp@intel.com> Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZNHPJFYLO64EGI5QUT7HZ63J7O5J2G7N/ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220125225243.15201-1-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Add BCMA shimFlorian Fainelli
Add a BCMA shim to allow us to register the brcmnand driver using the BCMA bus which provides indirect memory mapped access to SoC registers. There are a number of registers that need to be byte swapped because they are natively big endian, coming directly from the NAND chip, and there is no bus interface unlike the iProc or STB platforms that performs the byte swapping for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-10-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: BCMA controller uses command shift of 0Florian Fainelli
For some odd and unexplained reason the BCMA NAND controller, albeit revision 3.4 uses a command shift of 0 instead of 24 as it should be, quirk that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-9-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Allow platform data instantationFlorian Fainelli
Make use of the recently refactored code in brcmnand_init_cs() and derive the chip-select from the platform data that is supplied. Update the various code paths to avoid relying on possibly non-existent resources, too. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-8-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Allow working without interruptsFlorian Fainelli
The BCMA devices include the brcmnand controller but they do not wire up any interrupt line, allow the main interrupt to be optional and update the completion path to also check for the lack of an interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-6-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Move OF operations out of brcmnand_init_cs()Florian Fainelli
In order to initialize a given chip select object for use by the brcmnand driver, move all of the Device Tree specific routines outside of brcmnand_init_cs() in order to make it usable in a platform data configuration which will be necessary for supporting BCMA chips. No functional changes introduced. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-5-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Avoid pdev in brcmnand_init_cs()Florian Fainelli
In preparation for encapsulating more of what the loop calling brcmnand_init_cs() does, avoid using platform_device when it is the device behind platform_device that we are using for printing errors. No functional changes introduced. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-4-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Allow SoC to provide I/O operationsFlorian Fainelli
Allow a brcmnand_soc instance to provide a custom set of I/O operations which we will require when using this driver on a BCMA bus which is not directly memory mapped I/O. Update the nand_{read,write}_reg accordingly to use the SoC operations if provided. To minimize the penalty on other SoCs which do support standard MMIO accesses, we use a static key which is disabled by default and gets enabled if a soc implementation does provide I/O operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-3-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Assign soc as early as possibleFlorian Fainelli
In order to key off the brcmnand_probe() code in subsequent changes depending upon ctrl->soc, assign that variable as early as possible, instead of much later when we have checked that it is non-NULL. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-2-f.fainelli@gmail.com
2021-09-14mtd: rawnand: bcm6368: Make use of the helper function ↵Cai Huoqing
devm_platform_ioremap_resource_byname() Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210901074108.8933-1-caihuoqing@baidu.com
2021-03-28mtd: rawnand: brcmnand: move to polling in pio mode on oops writeKamal Dasu
This change makes sure that Broadcom NAND driver moves to interrupt polling on the first brcmnand_write() call. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210311170909.9031-2-kdasu.kdev@gmail.com
2021-03-28mtd: rawnand: brcmnand: read/write oob during EDU transferKamal Dasu
Added support to read/write oob during EDU transfers. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210311170909.9031-1-kdasu.kdev@gmail.com
2021-03-11mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECCÁlvaro Fernández Rojas
Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall always be done without ECC enabled. This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2 clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed from ff ff ff to 00 00 00, reporting incorrect ECC errors. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com
2020-11-20mtd: rawnand: brcmnand: Demote non-conformant kernel-doc headersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'host' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'addr' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'buf' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'len' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'cmd' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'host' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'desc' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'addr' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'buf' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'len' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'dma_cmd' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'begin' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'end' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'next_desc' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1977: warning: Function parameter or member 'host' not described in 'brcmnand_dma_run' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1977: warning: Function parameter or member 'desc' not described in 'brcmnand_dma_run' Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-14-lee.jones@linaro.org
2020-09-28mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevantMiquel Raynal
Instead of accessing ->strength/step_size directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-15-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Use the new ECC engine type enumerationMiquel Raynal
Mechanical switch from the legacy "mode" enumeration to the new "engine type" enumeration in drivers and board files. The device tree parsing is also updated to return the new enumeration from the old strings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
generated by cgit (git 2.34.1) at 2025-07-25 20:02:42 +0000