| Age | Commit message (Collapse) | Author |
|---|
|
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Flagged by Sparse.
Compile tested only.
Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics")
Closes: https://lore.kernel.org/all/AM9PR04MB850500D3FC24FE23DEFCEA158879A@AM9PR04MB8505.eurprd04.prod.outlook.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250624-etnetc-le-v1-1-a73a95d96e4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kernel robot reported the following errors when the netc-lib driver
was compiled as a loadable module and the enetc-core driver was built-in.
ld.lld: error: undefined symbol: ntmp_init_cbdr
referenced by enetc_cbdr.c:88 (drivers/net/ethernet/freescale/enetc/enetc_cbdr.c:88)
ld.lld: error: undefined symbol: ntmp_free_cbdr
referenced by enetc_cbdr.c:96 (drivers/net/ethernet/freescale/enetc/enetc_cbdr.c:96)
Simply changing "tristate" to "bool" can fix this issue, but considering
that the netc-lib driver needs to support being compiled as a loadable
module and LS1028 does not need the netc-lib driver. Therefore, we add a
boolean symbol 'NXP_NTMP' to enable 'NXP_NETC_LIB' as needed. And when
adding NETC switch driver support in the future, there is no need to
modify the dependency, just select "NXP_NTMP" and "NXP_NETC_LIB" at the
same time.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505220734.x6TF6oHR-lkp@intel.com/
Fixes: 4701073c3deb ("net: enetc: add initial netc-lib driver to support NTMP")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the handling of err_wq_init and err_reg_netdev paths in
enetc4_pf_netdev_create() function.
Fixes: 6c5bafba347b ("net: enetc: add MAC filtering for i.MX95 ENETC PF")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516052734.3624191-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.
Note: Due to circular module dependencies we can't simply
make mdio_devres.c part of phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/27cba535-f507-4b32-84a3-0744c783a465@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kernel test robot reported the following error:
drivers/net/ethernet/freescale/enetc/ntmp.c: In function 'ntmp_fill_request_hdr':
drivers/net/ethernet/freescale/enetc/ntmp.c:203:38: error: implicit
declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]
203 | cbd->req_hdr.access_method = FIELD_PREP(NTMP_ACCESS_METHOD,
| ^~~~~~~~~~
Therefore, add "bitfield.h" to ntmp_private.h to fix this issue.
Fixes: 4701073c3deb ("net: enetc: add initial netc-lib driver to support NTMP")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505101047.NTMcerZE-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the ENETC driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Move the enetc_hwtstamp_get() and enetc_hwtstamp_set() calls away from
enetc_ioctl() to dedicated net_device_ops for the LS1028A PF and VF
(NETC v4 does not yet implement enetc_ioctl()), adapt the prototypes and
export these symbols (enetc_ioctl() is also exported).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250512112402.4100618-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add internal loopback support for i.MX95 ENETC PF, the default loopback
mode is MAC level loopback, the MAC Tx data is looped back onto the Rx.
The MAC interface runs at a fixed 1:8 ratio of NETC clock in MAC-level
loopback mode, with no dependency on Tx clock.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-15-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the offsets of the VLAN hash filter registers of ENETC v4 are
different from ENETC v1. Therefore, enetc_set_si_vlan_ht_filter() is
added to set the correct VLAN hash filter based on the SI ID and ENETC
revision, so that ENETC v4 PF driver can reuse enetc_vlan_rx_add_vid()
and enetc_vlan_rx_del_vid(). In addition, the VLAN promiscuous mode will
be enabled if VLAN filtering is disabled, which means that PF qualifies
for reception of all VLAN tags.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-14-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VLAN hash filters of ENETC v1 and v4 are basically the same, the only
difference is that the offset of the VLAN hash filter registers has been
changed in ENETC v4. So some functions like enetc_vlan_rx_add_vid() and
enetc_vlan_rx_del_vid() only need to be slightly modified to be reused
by ENETC v4. Currently, we just move these functions from enetc_pf.c to
enetc_pf_common.c. Appropriate modifications will be made for ENETC4 in
a subsequent patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-13-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the common function enetc_refresh_vlan_ht_filter() from
enetc_sync_vlan_ht_filter() so that it can be reused by the ENETC
v4 PF and VF drivers in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-12-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Receive side scaling (RSS) is a network driver technology that enables
the efficient distribution of network receive processing across multiple
CPUs in multiprocessor systems. Therefore, it is better to enable RSS by
default so that the CPU load can be balanced and network performance can
be improved when then network is enabled.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-11-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Actually enetc_set_rss() does not need a return value, so change its
type to void.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-10-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Compared with LS1028A, there are two main differences: first, i.MX95
ENETC uses NTMP 2.0 to manage the RSS table, and second, the offset
of the RSS Key registers is different. Some modifications have been
made in the previous patches based on these differences to ensure that
the relevant interfaces are compatible with i.MX95. So it's time to
add RSS support to i.MX95 ENETC PF.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the offset of the RSS key registers of i.MX95 ENETC is different
from that of LS1028A, so add enetc_get_rss_key_base() to get the base
offset for the different chips, so that enetc_set_rss_key() can be
reused for this trivial thing.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-8-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since i.MX95 ENETC (v4) uses NTMP 2.0 to manage the RSS table, which is
different from LS1028A ENETC (v1). In order to reuse some functions
related to the RSS table, so add .get_rss_table() and .set_rss_table()
hooks to enetc_si_ops.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENETC's MAC filter consists of hash MAC filter and exact MAC filter.
Hash MAC filter is a 64-bit entry hash table consisting of two 32-bit
registers. Exact MAC filter is implemented by configuring MAC address
filter table through command BD ring. The table is stored in ENETC's
internal memory and needs to be read through command BD ring. In order
to facilitate debugging, added a debugfs interface to get the relevant
information about MAC filter.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The i.MX95 ENETC supports both MAC hash filter and MAC exact filter. MAC
hash filter is implenented through a 64-bit hash table to match against
the hashed addresses, PF and VFs each have two MAC hash tables, one is
for unicast and the other one is for multicast. But MAC exact filter is
shared between SIs (PF and VFs), each table entry contains a MAC address
that may be unicast or multicast and the entry also contains an SI bitmap
field that indicates for which SIs the entry is valid.
For i.MX95 ENETC, MAC exact filter only has 4 entries. According to the
observation of the system default network configuration, the MAC filter
will be configured with multiple multicast addresses, so MAC exact filter
does not have enough entries to implement multicast filtering. Therefore,
the current MAC exact filter is only used for unicast filtering. If the
number of unicast addresses exceeds 4, then MAC hash filter is used.
Note that both MAC hash filter and MAC exact filter can only be accessed
by PF, VFs can notify PF to set its corresponding MAC filter through the
mailbox mechanism of ENETC. But currently MAC filter is only added for
i.MX95 ENETC PF. The MAC filter support of ENETC VFs will be supported in
subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although only ENETC PF can access the MAC address filter table, the table
entries can specify MAC address filtering for one or more SIs based on
SI_BITMAP, which means that the table also supports MAC address filtering
for VFs.
Currently, only the ENETC v1 PF driver supports MAC address filtering. In
order to add the MAC address filtering support for the ENETC v4 PF driver
and VF driver in the future, the relevant generic interfaces are moved to
the enetc-core driver. This lays the basis for i.MX95 ENETC PF and VFs to
support MAC address filtering.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The command BD ring is used to configure functionality where the
underlying resources may be shared between different entities or being
too large to configure using direct registers (such as lookup tables).
Because the command BD and table formats of i.MX95 and LS1028A are very
different, the software processing logic is also different. So add
enetc4_setup_cbdr() and enetc4_teardown_cbdr() for ENETC v4 drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some NETC functionality is controlled using control messages sent to the
hardware using BD ring interface with 32B descriptor similar to transmit
BD ring used on ENETC. This BD ring interface is referred to as command
BD ring. It is used to configure functionality where the underlying
resources may be shared between different entities or being too large to
configure using direct registers. Therefore, a messaging protocol called
NETC Table Management Protocol (NTMP) is provided for exchanging
configuration and management information between the software and the
hardware using the command BD ring interface.
For the management protocol of LS1028A has been retroactively named NTMP
1.0, and its implementation is in enetc_cbdr.c and enetc_qos.c. However,
NTMP of i.MX95 has been upgraded to version 2.0, which is incompatible
with LS1028A, because the message formats have been changed. Therefore,
add the netc-lib driver to support NTMP 2.0 to operate various tables.
Note that, only MAC address filter table and RSS table are supported at
the moment. More tables will be supported in subsequent patches.
It is worth mentioning that the purpose of the netc-lib driver is to
provide some NTMP-based generic interfaces for ENETC and NETC Switch
drivers. Currently, it only supports the configurations of some tables.
Interfaces such as tc flower and debugfs will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After 52358dd63e34 ("net: phy: remove function stubs") there's a
problem if CONFIG_MDIO_BUS is set, but CONFIG_PHYLIB is not.
mdiobus_scan() uses phylib functions like get_phy_device().
Bringing back the stub wouldn't make much sense, because it would
allow to compile mdiobus_scan(), but the function would be unusable.
The stub returned NULL, and we have the following in mdiobus_scan():
phydev = get_phy_device(bus, addr, c45);
if (IS_ERR(phydev))
return phydev;
So calling mdiobus_scan() w/o CONFIG_PHYLIB would cause a crash later in
mdiobus_scan(). In general the PHYLIB functionality isn't optional here.
Consequently, MDIO bus providers depend on PHYLIB.
Therefore factor it out and build it together with the libphy core
modules. In addition make all MDIO bus providers under /drivers/net/mdio
depend on PHYLIB. Same applies to enetc MDIO bus provider. Note that
PHYLIB selects MDIO_DEVRES, therefore we can omit this here.
Fixes: 52358dd63e34 ("net: phy: remove function stubs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504270639.mT0lh2o1-lkp@intel.com/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c74772a9-dab6-44bf-a657-389df89d85c2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The newly added rtl9300 driver needs MDIO_DEVRES:
x86_64-linux-ld: drivers/net/mdio/mdio-realtek-rtl9300.o: in function `rtl9300_mdiobus_probe':
mdio-realtek-rtl9300.c:(.text+0x941): undefined reference to `devm_mdiobus_alloc_size'
x86_64-linux-ld: mdio-realtek-rtl9300.c:(.text+0x9e2): undefined reference to `__devm_mdiobus_register'
Since this is a hidden symbol, it needs to be selected by each user,
rather than the usual 'depends on'. I see that there are a few other
drivers that accidentally use 'depends on', so fix these as well for
consistency and to avoid dependency loops.
Fixes: 37f9b2a6c086 ("net: ethernet: Add missing depends on MDIO_DEVRES")
Fixes: 24e31e474769 ("net: mdio: Add RTL9300 MDIO driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://patch.msgid.link/20250425112819.1645342-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad91310 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e597 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vlatko Markovikj reported that XDP programs attached to ENETC do not
work well if they use bpf_xdp_adjust_head() or bpf_xdp_adjust_tail(),
combined with the XDP_PASS verdict. A typical use case is to add or
remove a VLAN tag.
The resulting sk_buff passed to the stack is corrupted, because the
algorithm used by the driver for XDP_PASS is to unwind the current
buffer pointer in the RX ring and to re-process the current frame with
enetc_build_skb() as if XDP hadn't run. That is incorrect because XDP
may have modified the geometry of the buffer, which we then are
completely unaware of. We are looking at a modified buffer with the
original geometry.
The initial reaction, both from me and from Vlatko, was to shop around
the kernel for code to steal that would calculate a delta between the
old and the new XDP buffer geometry, and apply that to the sk_buff too.
We noticed that veth and generic xdp have such code.
The headroom adjustment is pretty uncontroversial, but what turned out
severely problematic is the tailroom.
veth has this snippet:
__skb_put(skb, off); /* positive on grow, negative on shrink */
which on first sight looks decent enough, except __skb_put() takes an
"unsigned int" for the second argument, and the arithmetic seems to only
work correctly by coincidence. Second issue, __skb_put() contains a
SKB_LINEAR_ASSERT(). It's not a great pattern to make more widespread.
The skb may still be nonlinear at that point - it only becomes linear
later when resetting skb->data_len to zero.
To avoid the above, bpf_prog_run_generic_xdp() does this instead:
skb_set_tail_pointer(skb, xdp->data_end - xdp->data);
skb->len += off; /* positive on grow, negative on shrink */
which is more open-coded, uses lower-level functions and is in general a
bit too much to spread around in driver code.
Then there is the snippet:
if (xdp_buff_has_frags(xdp))
skb->data_len = skb_shinfo(skb)->xdp_frags_size;
else
skb->data_len = 0;
One would have expected __pskb_trim() to be the function of choice for
this task. But it's not used in veth/xdpgeneric because the extraneous
fragments were _already_ freed by bpf_xdp_adjust_tail() ->
bpf_xdp_frags_shrink_tail() -> ... -> __xdp_return() - the backing
memory for the skb frags and the xdp frags is the same, but they don't
keep individual references.
In fact, that is the biggest reason why this snippet cannot be reused
as-is, because ENETC temporarily constructs an skb with the original len
and the original number of frags. Because the extraneous frags are
already freed by bpf_xdp_adjust_tail() and returned to the page
allocator, it means the entire approach of using enetc_build_skb() is
questionable for XDP_PASS. To avoid that, one would need to elevate the
page refcount of all frags before calling bpf_prog_run_xdp() and drop it
after XDP_PASS.
There are other things that are missing in ENETC's handling of XDP_PASS,
like for example updating skb_shinfo(skb)->meta_len.
These are all handled correctly and cleanly in commit 539c1fba1ac7
("xdp: add generic xdp_build_skb_from_buff()"), added to net-next in
Dec 2024, and in addition might even be quicker that way. I have a very
strong preference towards backporting that commit for "stable", and that
is what is used to fix the handling bugs. It is way too messy to go
this deep into the guts of an sk_buff from the code of a device driver.
Fixes: d1b15102dd16 ("net: enetc: add support for XDP_DROP and XDP_PASS")
Reported-by: Vlatko Markovikj <vlatko.markovikj@etas.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This small snippet of code ensures that we do something with the array
of RX software buffer descriptor elements after passing the skb to the
stack. In this case, we see if the other half of the page is reusable,
and if so, we "turn around" the buffers, making them directly usable by
enetc_refill_rx_ring() without going to enetc_new_page().
We will need to perform this kind of buffer flipping from a new code
path, i.e. from XDP_PASS. Currently, enetc_build_skb() does it there
buffer by buffer, but in a subsequent change we will stop using
enetc_build_skb() for XDP_PASS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the time when bpf_xdp_adjust_tail() gained support for non-linear
buffers, ENETC was already generating this kind of geometry on RX, due
to its use of 2K half page buffers. Frames larger than 1472 bytes
(without FCS) are stored as multi-buffer, presenting a need for multi
buffer support to work properly even in standard MTU circumstances.
Allow bpf_xdp_frags_increase_tail() to know the allocation size of paged
data, so it can safely permit growing the tailroom of the buffer from
XDP programs.
Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many drivers populate the stats buffer using C-String based APIs (e.g.
ethtool_sprintf() and ethtool_puts()), usually when building up the
list of stats individually (i.e. with a for() loop). This, however,
requires that the source strings be populated in such a way as to have
a terminating NUL byte in the source.
Other drivers populate the stats buffer directly using one big memcpy()
of an entire array of strings. No NUL termination is needed here, as the
bytes are being directly passed through. Yet others will build up the
stats buffer individually, but also use memcpy(). This, too, does not
need NUL termination of the source strings.
However, there are cases where the strings that populate the
source stats strings are exactly ETH_GSTRING_LEN long, and GCC
15's -Wunterminated-string-initialization option complains that the
trailing NUL byte has been truncated. This situation is fine only if the
driver is using the memcpy() approach. If the C-String APIs are used,
the destination string name will have its final byte truncated by the
required trailing NUL byte applied by the C-string API.
For drivers that are already using memcpy() but have initializers that
truncate the NUL terminator, mark their source strings as __nonstring to
silence the GCC warnings.
For drivers that have initializers that truncate the NUL terminator and
are using the C-String APIs, switch to memcpy() to avoid destination
string truncation and mark their source strings as __nonstring to silence
the GCC warnings. (Also introduce ethtool_cpy() as a helper to make this
an easy replacement).
Specifically the following warnings were investigated and addressed:
../drivers/net/ethernet/chelsio/cxgb/cxgb2.c:364:9: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
364 | "TxFramesAbortedDueToXSCollisions",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/freescale/enetc/enetc_ethtool.c:165:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
165 | { ENETC_PM_R1523X(0), "MAC rx 1523 to max-octet packets" },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/freescale/enetc/enetc_ethtool.c:190:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
190 | { ENETC_PM_T1523X(0), "MAC tx 1523 to max-octet packets" },
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/google/gve/gve_ethtool.c:76:9: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
76 | "adminq_dcfg_device_resources_cnt", "adminq_set_driver_parameter_cnt",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:117:53: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
117 | STMMAC_STAT(ptp_rx_msg_type_pdelay_follow_up),
| ^
../drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:46:12: note: in definition of macro 'STMMAC_STAT'
46 | { #m, sizeof_field(struct stmmac_extra_stats, m), \
| ^
../drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:328:24: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
328 | .str = "a_mac_control_frames_transmitted",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:340:24: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
340 | .str = "a_pause_mac_ctrl_frames_received",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250416010210.work.904-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an off-by-one issue for the err_chained_bd path, it will free
one more tx_swbd than expected. But there is no such issue for the
err_map_data path. To fix this off-by-one issue and make the two error
handling consistent, the increment of 'i' and 'count' remain in sync
and enetc_unwind_tx_frame() is called for error handling.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the ENETC v4 driver has not added the MAC merge layer support
in the upstream, so the mm_lock is not initialized and used, so remove
the mm_lock from the driver.
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-8-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The enetc4_link_init() is called when the PF driver probes to create
phylink and MDIO bus, but we forgot to call enetc4_link_deinit() to
free the phylink and MDIO bus when the driver was unbound. so add
missing enetc4_link_deinit() to enetc4_pf_netdev_destroy().
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an issue with one-step timestamp based on UDP/IP. The peer will
discard the sync packet because of the wrong UDP checksum. For ENETC v1,
the software needs to update the UDP checksum when updating the
originTimestamp field, so that the hardware can correctly update the UDP
checksum when updating the correction field. Otherwise, the UDP checksum
in the sync packet will be wrong.
Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only
ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash
if VFs are used to test one-step timestamp, the crash log as follows.
[ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0
[ 129.287769] Call trace:
[ 129.290219] enetc_port_mac_wr+0x30/0xec (P)
[ 129.294504] enetc_start_xmit+0xda4/0xe74
[ 129.298525] enetc_xmit+0x70/0xec
[ 129.301848] dev_hard_start_xmit+0x98/0x118
Fixes: 41514737ecaa ("enetc: add get_ts_info interface for ethtool")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'xdp_tx' is used to count the number of XDP_TX frames sent, not the
number of Tx BDs.
Fixes: 7ed2bc80074e ("net: enetc: add support for XDP_TX")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When creating a TSO header, if the skb is VLAN tagged, the extended BD
will be used and the 'count' should be increased by 2 instead of 1.
Otherwise, when an error occurs, less tx_swbd will be freed than the
actual number.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a DMA mapping error occurs while processing skb frags, it will free
one more tx_swbd than expected, so fix this off-by-one issue.
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set NETIF_F_GSO_UDP_L4 bit of hw_features and features because i.MX95
enetc and LS1028A driver implements UDP segmentation.
- i.MX95 ENETC supports UDP segmentation via LSO.
- LS1028A ENETC supports UDP segmentation since the commit 3d5b459ba0e3
("net: tso: add UDP segmentation support").
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENETC rev 4.1 supports large send offload (LSO), segmenting large TCP
and UDP transmit units into multiple Ethernet frames. To support LSO,
software needs to fill some auxiliary information in Tx BD, such as LSO
header length, frame length, LSO maximum segment size, etc.
At 1Gbps link rate, TCP segmentation was tested using iperf3, and the
CPU performance before and after applying the patch was compared through
the top command. It can be seen that LSO saves a significant amount of
CPU cycles compared to software TSO.
Before applying the patch:
%Cpu(s): 0.1 us, 4.1 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.5 hi, 9.7 si
After applying the patch:
%Cpu(s): 0.1 us, 2.3 sy, 0.0 ni, 94.5 id, 0.0 wa, 0.4 hi, 2.6 si
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The max chained Tx BDs of latest ENETC (i.MX95 ENETC, rev 4.1) has been
increased to 63, but since the range of MAX_SKB_FRAGS is 17~45, so for
i.MX95 ENETC and later revision, it is better to set ENETC4_MAX_SKB_FRAGS
to MAX_SKB_FRAGS.
In addition, add max_frags in struct enetc_drvdata to indicate the max
chained BDs supported by device. Because the max number of chained BDs
supported by LS1028A and i.MX95 ENETC is different.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241219054755.1615626-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In addition to supporting Rx checksum offload, i.MX95 ENETC also supports
Tx checksum offload. The transmit checksum offload is implemented through
the Tx BD. To support Tx checksum offload, software needs to fill some
auxiliary information in Tx BD, such as IP version, IP header offset and
size, whether L4 is UDP or TCP, etc.
Same as Rx checksum offload, Tx checksum offload capability isn't defined
in register, so tx_csum bit is added to struct enetc_drvdata to indicate
whether the device supports Tx checksum offload.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20241219054755.1615626-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure
MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs()
to configure preemptible TCs. However, only PF is able to configure
preemptible TCs. Because only PF has related registers, while VF does not
have these registers. So for VF, its hw->port pointer is NULL. Therefore,
VF will access an invalid pointer when accessing a non-existent register,
which will cause a crash issue. The simplified log is as follows.
root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[ 187.511140] Call trace:
[ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.518918] enetc_setup_tc_mqprio+0x180/0x214
[ 187.523374] enetc_vf_setup_tc+0x1c/0x30
[ 187.527306] mqprio_enable_offload+0x144/0x178
[ 187.531766] mqprio_init+0x3ec/0x668
[ 187.535351] qdisc_create+0x15c/0x488
[ 187.539023] tc_modify_qdisc+0x398/0x73c
[ 187.542958] rtnetlink_rcv_msg+0x128/0x378
[ 187.547064] netlink_rcv_skb+0x60/0x130
[ 187.550910] rtnetlink_rcv+0x18/0x24
[ 187.554492] netlink_unicast+0x300/0x36c
[ 187.558425] netlink_sendmsg+0x1a8/0x420
[ 187.606759] ---[ end trace 0000000000000000 ]---
In addition, some PFs also do not support configuring preemptible TCs,
such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs,
but we should prevent these PFs from accessing these unimplemented
registers.
Fixes: 827145392a4a ("net: enetc: only commit preemptible TCs to hardware when MM TX is active")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configuring TSN (Qbv, Qbu, PSFP) capabilities requires access to port
registers, which are available to the PSI but not the VSI.
Yet, the SI port capability register 0 (PSICAPR0), exposed to both PSIs
and VSIs, presents the same capabilities to the VF as to the PF, thus
leading the VF driver into thinking it can configure these features.
In the case of ENETC_SI_F_QBU, having it set in the VF leads to a crash:
root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[ 187.511140] Call trace:
[ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.518918] enetc_setup_tc_mqprio+0x180/0x214
[ 187.523374] enetc_vf_setup_tc+0x1c/0x30
[ 187.527306] mqprio_enable_offload+0x144/0x178
[ 187.531766] mqprio_init+0x3ec/0x668
[ 187.535351] qdisc_create+0x15c/0x488
[ 187.539023] tc_modify_qdisc+0x398/0x73c
[ 187.542958] rtnetlink_rcv_msg+0x128/0x378
[ 187.547064] netlink_rcv_skb+0x60/0x130
[ 187.550910] rtnetlink_rcv+0x18/0x24
[ 187.554492] netlink_unicast+0x300/0x36c
[ 187.558425] netlink_sendmsg+0x1a8/0x420
[ 187.606759] ---[ end trace 0000000000000000 ]---
while the other TSN features in the VF are harmless, because the
net_device_ops used for the VF driver do not expose entry points for
these other features.
These capability bits are in the process of being defeatured from the SI
registers. We should read them from the port capability register, where
they are also present, and which is naturally only exposed to the PF.
The change to blame (relevant for stable backports) is the one where
this started being a problem, aka when the kernel started to crash due
to the wrong capability seen by the VF driver.
Fixes: 827145392a4a ("net: enetc: only commit preemptible TCs to hardware when MM TX is active")
Reported-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We recently added this error path. We need to call enetc_pci_remove()
before returning. It cleans up the resources from enetc_pci_probe().
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/93888efa-c838-4682-a7e5-e6bf318e844e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20241105093125.1087202-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The i.MX95 ENETC has been upgraded to revision 4.1, which is different
from the LS1028A ENETC (revision 1.0) except for the SI part. Therefore,
the fsl-enetc driver is incompatible with i.MX95 ENETC PF. So add new
nxp-enetc4 driver to support i.MX95 ENETC PF, and this driver will be
used to support the ENETC PF with major revision 4 for other SoCs in the
future.
Currently, the nxp-enetc4 driver only supports basic transmission feature
for i.MX95 ENETC PF, the more basic and advanced features will be added
in the subsequent patches. In addition, PCS support has not been added
yet, so 10G ENETC (ENETC instance 2) is not supported now.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a situation where num_tx_rings cannot be divided by bdr_int_num.
For example, num_tx_rings is 8 and bdr_int_num is 3. According to the
previous logic, this results in two tx_bdr corresponding memories not
being allocated, so when sending packets to tx ring 6 or 7, wild pointers
will be accessed. Of course, this issue doesn't exist on LS1028A, because
its num_tx_rings is 8, and bdr_int_num is either 1 or 2. However, there
is a risk for the upcoming i.MX95. Therefore, it is necessary to ensure
that each tx_bdr can be allocated to the corresponding memory.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract enetc_int_vector_init() and enetc_int_vector_destroy() from
enetc_alloc_msix() so that the code is more concise and readable.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The verdor ID and device ID of i.MX95 EMDIO are different from LS1028A
EMDIO, so add new vendor ID and device ID to pci_device_id table to
support i.MX95 EMDIO.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ERR050089 workaround causes performance degradation and potential
functional issues (e.g., RCU stalls) under certain workloads. Since
new SoCs like i.MX95 do not require this workaround, use a static key
to compile out enetc_lock_mdio() and enetc_unlock_mdio() at runtime,
improving performance and avoiding unnecessary logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Compile enetc_pf_common.c as a standalone module to allow shared usage
between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register
different hardware operation interfaces for both ENETC v1 and v4 PF
drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
