Age | Commit message (Collapse) | Author |
|
Multicast good packets received by PF rings that pass ethternet MAC
address filtering are counted for rtnl_link_stats64.multicast. The
counter is not cleared on read. Fix the duplicate counting on updating
statistics.
Fixes: 46b92e10d631 ("net: libwx: support hardware statistics")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/DA229A4F58B70E51+20250714015656.91772-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When device reset is triggered by feature changes such as toggling Rx
VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The
hardware descriptor ring may retain stale values from previous sessions.
And only set the length to 0 in rx_desc[0] would result in building
malformed SKBs. Fix it to ensure a clean slate after device reset.
[ 549.186435] [ C16] ------------[ cut here ]------------
[ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814!
[ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary)
[ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510
[ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8
[ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282
[ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2
[ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40
[ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e
[ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200
[ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2
[ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000
[ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0
[ 549.186505] [ C16] PKRU: 55555554
[ 549.186507] [ C16] Call Trace:
[ 549.186510] [ C16] <IRQ>
[ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186517] [ C16] __skb_pad+0xc7/0xf0
[ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx]
[ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx]
[ 549.186540] [ C16] __napi_poll+0x28/0x190
[ 549.186544] [ C16] net_rx_action+0x301/0x3f0
[ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50
[ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160
[ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0
[ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130
[ 549.186572] [ C16] common_interrupt+0xb8/0xd0
[ 549.186576] [ C16] </IRQ>
[ 549.186577] [ C16] <TASK>
[ 549.186579] [ C16] asm_common_interrupt+0x22/0x40
[ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246
[ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000
[ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3
[ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000
[ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40
[ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000
[ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420
[ 549.186605] [ C16] cpuidle_enter+0x29/0x40
[ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170
[ 549.186613] [ C16] do_idle+0x7a/0xc0
[ 549.186616] [ C16] cpu_startup_entry+0x25/0x30
[ 549.186618] [ C16] start_secondary+0x117/0x140
[ 549.186623] [ C16] common_startup_64+0x13e/0x148
[ 549.186628] [ C16] </TASK>
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wx_rx_buffer structure contained two DMA address fields: 'dma' and
'page_dma'. However, only 'page_dma' was actually initialized and used
to program the Rx descriptor. But 'dma' was uninitialized and used in
some paths.
This could lead to undefined behavior, including DMA errors or
use-after-free, if the uninitialized 'dma' was used. Althrough such
error has not yet occurred, it is worth fixing in the code.
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_put_full_page() should only be invoked when freeing Rx buffers
or building a skb if the size is too short. At other times, the pages
need to be reused. So remove the redundant page put. In the original
code, double free pages cause kernel panic:
[ 876.949834] __irq_exit_rcu+0xc7/0x130
[ 876.949836] common_interrupt+0xb8/0xd0
[ 876.949838] </IRQ>
[ 876.949838] <TASK>
[ 876.949840] asm_common_interrupt+0x22/0x40
[ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246
[ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000
[ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e
[ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed
[ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580
[ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000
[ 876.949852] ? cpuidle_enter_state+0xb3/0x420
[ 876.949855] cpuidle_enter+0x29/0x40
[ 876.949857] cpuidle_idle_call+0xfd/0x170
[ 876.949859] do_idle+0x7a/0xc0
[ 876.949861] cpu_startup_entry+0x25/0x30
[ 876.949862] start_secondary+0x117/0x140
[ 876.949864] common_startup_64+0x13e/0x148
[ 876.949867] </TASK>
[ 876.949868] ---[ end trace 0000000000000000 ]---
[ 876.949869] ------------[ cut here ]------------
[ 876.949870] list_del corruption, ffffead40445a348->next is NULL
[ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120
[ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E)
[ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi
[ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary)
[ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE
[ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120
[ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8
[ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282
[ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000
[ 876.949942] RDX: 0000000000000105 RSI: 0000000000000001 RDI: 00000000ffffffff
[ 876.949943] RBP: 0000000000000000 R08: 000000010006dfde R09: ffffffff8a47d150
[ 876.949944] R10: ffffffff8a47d150 R11: 0000000000000003 R12: dead000000000122
[ 876.949945] R13: ffff9e3e9e5af700 R14: ffffead40445a348 R15: ffff9e3e9e5af720
[ 876.949946] FS: 0000000000000000(0000) GS:ffff9e3f135be000(0000) knlGS:0000000000000000
[ 876.949947] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 876.949948] CR2: 00007fa58b480048 CR3: 0000000156724000 CR4: 0000000000750ef0
[ 876.949949] PKRU: 55555554
[ 876.949950] Call Trace:
[ 876.949951] <IRQ>
[ 876.949952] __rmqueue_pcplist+0x53/0x2c0
[ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660
[ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400
[ 876.949961] page_pool_alloc_pages+0xa/0x20
[ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx]
[ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx]
[ 876.949971] wx_poll+0x92/0x130 [libwx]
[ 876.949975] __napi_poll+0x28/0x190
[ 876.949977] net_rx_action+0x301/0x3f0
[ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949981] ? profile_tick+0x30/0x70
[ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949986] ? timerqueue_add+0xa3/0xc0
[ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949989] ? __raise_softirq_irqoff+0x16/0x70
[ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx]
[ 876.949998] handle_softirqs+0xf9/0x2c0
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For NGBE devices, the queue number is limited to be 1 when SRIOV is
enabled. In this case, IRQ vector[0] is used for MISC and vector[1] is
used for queue, based on the previous patches. But for the hardware
design, the IRQ vector[1] must be allocated for use by the VF[6] when
the number of VFs is 7. So the IRQ vector[0] should be shared for PF
MISC and QUEUE interrupts.
+-----------+----------------------+
| Vector | Assigned To |
+-----------+----------------------+
| Vector 0 | PF MISC and QUEUE |
| Vector 1 | VF 6 |
| Vector 2 | VF 5 |
| Vector 3 | VF 4 |
| Vector 4 | VF 3 |
| Vector 5 | VF 2 |
| Vector 6 | VF 1 |
| Vector 7 | VF 0 |
+-----------+----------------------+
Minimize code modifications, only adjust the IRQ vector number for this
case.
Fixes: 877253d2cbf2 ("net: ngbe: add sriov function support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Due to hardware limitations of NGBE, queue IRQs can only be requested
on vector 0 to 7. When the number of queues is set to the maximum 8,
the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by
MISC interrupt, and althrough the vector 8 is used by queue interrupt,
it is unable to receive packets. This will cause some packets to be
dropped when RSS is enabled and they are assigned to queue 8.
So revert the adjustment of the MISC IRQ location, to make it be the
last one in IRQ vectors.
Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move the creating of irq_domain for MISC IRQ from .probe to .ndo_open,
and free it in .ndo_stop, to maintain consistency with the queue IRQs.
This it for subsequent adjustments to the IRQ vectors.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250701063030.59340-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is
changed to be 1. RSS is disabled at this moment, and the indices of FDIR
have not be changed in wx_set_rss_queues(). So the combined count still
shows the previous value. This issue was introduced when supporting
FDIR. Fix it for those devices that support FDIR.
Fixes: 34744a7749b3 ("net: txgbe: add FDIR info to ethtool ops")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a occasional problem that ping is failed between AML devices.
That is because the manual enablement of the security Tx path on the
hardware is missing, no matter what its previous state was.
Fixes: 6f8b4c01a8cd ("net: txgbe: Implement PHYLINK for AML 25G/10G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5BDFB14C57D1C42A+20250626085153.86122-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'rx_ring->size' means the count of ring descriptors multiplied by the
size of one descriptor. When increasing the count of ring descriptors,
it may exceed the limit of pool size.
[ 864.209610] page_pool_create_percpu() gave up with errno -7
[ 864.209613] txgbe 0000:11:00.0: Page pool creation failed: -7
Fix to set the pool_size to the count of ring descriptors.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/434C72BFB40E350A+20250625023924.21821-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
When SR-IOV is enabled, the FDIR rule is supported to filter packets to
VFs. The action queue id is calculated as an absolute id.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/BE7EA355FDDAAA97+20250523080438.27968-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When SR-IOV is enabled, the number of multicast packets is mistakenly
counted starting from queue 0. It would be a wrong count that includes
the packets received on VF. Fix it to count from the correct offset.
Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/F70910CFE86C1F6F+20250523080438.27968-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
Since .mac_link_up and .mac_link_down are changed for AML 25G/10G NICs,
the SR-IOV related function should be invoked in these new functions, to
bring VFs link up.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/BA8B302B7AAB6EA6+20250521064402.22348-10-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support PTP clock and 1PPS output signal for AML devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/F2F6E5E8899D2C20+20250521064402.22348-9-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The new added mailbox commands require a new released firmware version.
Otherwise, a lot of logs "Unknown FW command" would be printed. And the
devices may not work properly. So add the test command in the probe
function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/18283F17BE0FA335+20250521064402.22348-8-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For AML 25G/10G devices, some of the information returned from
phylink_ethtool_ksettings_get() is not correct, since there is a
fixed-link mode. So add additional corrections.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C94BF867617C544D+20250521064402.22348-7-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver needs to handle GPIO interrupts to identify SFP module and
configure PHY by sending mailbox messages to firmware.
Since the SFP module needs to wait for ready to get information when it
is inserted, workqueue is added to handle delayed tasks. And each SW-FW
interaction takes time to wait, so they are processed in the workqueue
instead of IRQ handler function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/399624AF221E8E28+20250521064402.22348-6-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a new PHY attached to AML 25G/10G NIC, which is different from
SP 10G/1G NIC. But the PHY configuration is handed over to firmware, and
also I2C is controlled by firmware. So the different PHYLINK fixed-link
mode is added for these devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/987B973A5929CD48+20250521064402.22348-5-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For the following patches to support PHYLINK for AML 25G devices,
separate MAC type wx_mac_aml40 to maintain the driver of 40G devices.
Because 40G devices will complete support later, not now.
And this patch makes the 25G devices use some PHYLINK interfaces, but it
is not yet create PHYLINK and cannot be used on its own. It is just
preparation for the next patches.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/592B1A6920867D0C+20250521064402.22348-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most of the different code that requires MAC type in the common library
is due to NGBE only supports a few queues and pools, unlike TXGBE, which
supports 128 queues and 64 pools. This difference accounts for most of
the hardware configuration differences in the driver code. So add a flag
bit "WX_FLAG_MULTI_64_FUNC" for them to clean-up the driver code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C731132E124D75E5+20250521064402.22348-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since AML devices are going to reuse some definitions, remove the "SP"
qualifier from these definitions.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8EF712EC14B8FF70+20250521064402.22348-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a log should be printed as info level, not error level.
Fixes: 9bfd65980f8d ("net: libwx: Add sriov api for wangxun nics")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/67409DB57B87E2F0+20250519063357.21164-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-28-jirislaby@kernel.org
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc7).
Conflicts:
tools/testing/selftests/drivers/net/hw/ncdevmem.c
97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au
Adjacent changes:
net/core/devmem.c
net/core/devmem.h
0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload")
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, missing the error return if there is an
unknown command. It causes the driver to mistakenly believe that the
interaction is complete. This problem occurs when new driver is paired
with old firmware, which does not support the new mailbox commands.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/64DBB705D35A0016+20250513021009.145708-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, the timeout waiting for the firmware to
return is too short. So that some mailbox commands cannot be completed.
Use the 'timeout' parameter instead of fixed timeout value for flexible
configuration.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5D5BDE3EA501BDB8+20250513021009.145708-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the new firmware version, the shadow ram reserves some space to store
I2C information, so the checksum calculation needs to skip this section.
Otherwise, the driver will fail to probe because the invalid EEPROM
checksum.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1C6BF7A937237F5A+20250513021009.145708-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are wrong "#endif" comments in .h files need to be corrected.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For unknown reasons, sometimes the value of MISC interrupt is 0 in the
IRQ handle function. In this case, wx_intr_enable() is also should be
invoked to clear the interrupt. Otherwise, the next interrupt would
never be reported.
Fixes: a9843689e2de ("net: txgbe: add sriov function support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/F4F708403CE7090B+20250512100652.139510-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement ndo_features_check to restrict Tx checksum offload flags, since
there are some inner layer length and protocols unsupported.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250421022956.508018-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tunnel types VXLAN/VXLAN_GPE/GENEVE are supported for txgbe devices. The
hardware supports to set only one port for each tunnel type.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250421022956.508018-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc3).
No conflicts. Adjacent changes:
tools/net/ynl/pyynl/ynl_gen_c.py
4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When txgbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent
error paths after txgbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when txgbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number")
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415032910.13139-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because of the addition of support for 25G/40G devices, update the module
description.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250414022421.375101-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When ngbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent
error paths after ngbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when ngbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 02338c484ab6 ("net: ngbe: Initialize sw info and register netdev")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250412154927.25908-1-abdun.nihaal@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc2).
Conflict:
Documentation/networking/netdevices.rst
net/core/lock_debug.c
04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE")
03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add sriov_configure for driver ops.
Add mailbox handler wx_msg_task for txgbe.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/ECDC57CF4F2316B9+20250408091556.9640-7-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add sriov_configure for driver ops.
Add mailbox handler wx_msg_task for ngbe in
the interrupt handler.
Add the notification flow when the vfs exist.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/C9A0A43732966022+20250408091556.9640-6-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement wx_msg_task which is used to process mailbox
messages sent by vf.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/8257B39B95CDB469+20250408091556.9640-5-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reallocate queue and int resources when sriov is enabled.
Redefine macro VMDQ to make it work in VT mode.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/64B616774ABE3C5A+20250408091556.9640-4-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement sriov_configure interface for wangxun nics in libwx.
Enable VT mode and initialize vf control structure, when sriov
is enabled. Do not be allowed to disable sriov when vfs are
assigned.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/81EA45C21B0A98B0+20250408091556.9640-3-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implements the mailbox interfaces for wangxun pf drivers
ngbe and txgbe.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/70017BD4D67614A4+20250408091556.9640-2-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page)
but it would still proceed to use the NULL pointer and then crash.
This is similar to commit 001ba0902046
("net: fec: handle page_pool_dev_alloc_pages error").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
WX_RXD_IPV6EX was incorrectly defined in Rx ring descriptor. In fact, this
field stores the 802.1ad ID from which the packet was received. The wrong
definition caused the statistics rx_csum_offload_errors to fail to grow
when receiving the 802.1ad packet with incorrect checksum.
Fixes: ef4f3c19f912 ("net: wangxun: libwx add rx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250407103322.273241-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol.
There was a bug to set Tx checksum flag for the other protocol that results
in Tx ring hang. Fix to compute software checksum for these packets.
Fixes: 3403960cdf86 ("net: wangxun: libwx add tx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250324103235.823096-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The length of skb header was incorrectly calculated when transmit a tunnel
packet with outer IPv6 extension header, or a IP over IP packet which has
inner IPv6 header. Thus the correct Tx context descriptor cannot be
composed, resulting in Tx ring hang.
Fixes: 3403960cdf86 ("net: wangxun: libwx add tx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250324103235.823096-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|