summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-8000.c
AgeCommit message (Collapse)Author
2015-11-18iwlwifi: move under intel vendor directoryKalle Valo
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-28iwlwifi: mvm: remove SCD_QUEUE_CONFIG TLV flagLiad Kaufman
We don't support firmwares that don't use the new API. This also allows to use all the SCD queues, so increase the reported number of queues to 31. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2015-08-28iwlwifi: mvm: don't load -12.ucode anymoreEmmanuel Grumbach
-13.ucode has been published long ago. Deprecate old versions of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2015-08-23iwlwifi: mvm: bump firmware API to 17Emmanuel Grumbach
The driver is now able to handle -17.ucode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-18iwlwifi: bump mvm firmware API to 16Emmanuel Grumbach
The driver is now able to handle -16.ucode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: Add max TX aggregation size for 8260 SDIO devices seriesAlexander Bondar
Set max TX aggregation size for 8260 SDIO devices series to 40 frames. Fine tune max RX aggregation size - change it to 21. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: mvm: Enable Rx Checksum hwAvri Altman
TCP software implementation on the host requires extensive computing power. Offloading even some of the TCP/IP stack to the NIC might save a significant overhead. In order to enable this feature on our hw, we need to configure it first. Once done, we mark this capability, to be advertised later to the OS via ieee80211_register_hw. The driver Rx indications for TCP Checksum is integrated within the standard Rx status. The driver responds to those indications as follows: If the frame was tested by hw and checksum ok report CHECKSUM_UNNECESSARY. Otherwise, report CHECKSUM_NONE. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-06-26iwlwifi: deprecate -10.ucode for 3160 / 7260 / 7265Sara Sharon
This firmware is not supported anymore - stop loading this firmware. Remove code handling older versions. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-06-03iwlwifi: bump the iwlmvm API number to 15Emmanuel Grumbach
The driver is now ready to handle the -15.ucode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-06-03iwlwifi: pcie: Control access to the NIC's PM registers via iwl_cfgAvri Altman
Allow a cleaner way to access those hw-dependent registers, instead of using the product family type etc. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-05-28iwlwifi: update thermal throttling values for 8000 devicesIdo Yariv
8000 devices have different thermal throttling values from previous generations. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-05-28iwlwifi: 8000: fallback to default NVM fileEran Harary
Set a default NVM in case the userspace specifies a file that doesn't match the hardware version. This allows not to change the boot scripts when someone replaces the device with a newer hardware step. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-05-28iwlwifi: bump API to 14Emmanuel Grumbach
The iwlmvm driver is now able to handle -14.ucode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-30iwlwifi: 8000: change PNVM in case it doesn't match to the HW stepEran Harary
There is a strong relationship between the NVM version and the hardware step. Enforce that in the driver in case the default NVM on the platform is the wrong one. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26iwlwifi: drop support for early versions of 8000Emmanuel Grumbach
These early versions are no longer supported. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-12iwlwifi: bump API to 13 for devices that use iwlmvmEmmanuel Grumbach
This new firmware will come out soon. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: deprecate -9.ucode for 3160 / 7260 / 7265Luciano Coelho
This firmware is not supported anymore. Stop loading this firmware. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/iwl-fw-file.h drivers/net/wireless/iwlwifi/mvm/scan.c
2015-01-22iwlwifi: mvm: add support for dumping a secondary SRAMIdo Yariv
Some HW modules have two SRAMs. In such cases add the secondary SRAM to the list of dumped segments. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: add new config and PCI IDs for 4165 seriesOren Givon
Add a new config for 4165 series over PCI and insert support for two new 4165 series PCI IDs. Signed-off-by: Oren Givon <oren.givon@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-05iwlwifi: bump firmware API for mvm devices to 12Emmanuel Grumbach
This allows 3160 / 7260 / 7265 / 7265D / 8000 devices to use the latest version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add smem content to dump dataLiad Kaufman
In NICs that have SMEM - add its content to the dump data for later debug. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: support additional nvm_file in family 8000 B stepEran Harary
nvm_file in family 8000 B step and A step differ. This means that the driver should support 2 file name as default. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-28iwlwifi: mvm: add fw runtime stack to dump dataLiad Kaufman
The allocation of the DCCM between the data and the stack can theoretically change without notice to the driver, but the total size is HW-fixed. Since the stack CCM (runtime stack) has also data important to the FW - this patch allows pulling the whole DCCM in one piece and adds it to the dump data. If the size isn't known - just use the data part of the DCCM as it appears in the FW TLVs. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-02iwlwifi: fix 4165 series nameOren Givon
Fix the 4165 series name that was called 4265 by mistake. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-12-01iwlwifi: deprecate -8.ucode for 3160 / 7260 / 7265Emmanuel Grumbach
This firmware is not supported anymore. Stop loading this firmware - and remove the code that handled older versions. Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: sdio: new SDIO card id for 4165 seriesOren Givon
Add a new SDIO card id intended for the new 4165 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-24iwlwifi: declare d0i3 support for IWL_DEVICE_8000Eliad Peller
Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-11-23iwlwifi: change max HT and VHT A-MPDU exponentEran Harary
Add two new parameters to iwl_cfg: max_ht_ampdu_exponent and max_vht_ampdu_exponent. These parameters, if set, will set new values to the maximum of HT and VHT A-MPDU exponent for the A-MPDU length exponent. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: enable STBC support for 8000 chipsEyal Shapira
These chips support STBC in both Tx and Rx. Given that we've added STBC Tx support enable it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-23iwlwifi: 8000: fix string given to MODULE_FIRMWARELiad Kaufman
I changed the string but forgot to update the fix also to MODULE_FIRMWARE(). Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-21iwlwifi: 8000: fix fw name to account for revisionLiad Kaufman
The 8000 HW series also includes the revision in the FW name. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: define the non shared antenna per hardwareEmmanuel Grumbach
The sharing model will differ in new hardware. Define the non shared antenna based on the device so that different devices can have different names for the non shared antenna. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: enable LDPC in 8000 chip familyEyal Shapira
This chip family supports LDPC so enable it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: mvm: allow preventing dummy notificationsEran Harary
The firwmare now allows the driver to disable dummy notifications. These notifications sent by the firmware are an overhead for slow buses. They are still useful for fast buses. Add a hardware switch to prevent these notifications only on devices that work on slow buses. Signed-off-by: Eran <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14iwlwifi: add and edit 8000 series PCI IDsOren Givon
Edit some 8000 series PCI IDs and add configuration to Dual Band Wireless N 8260 devices. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-14Merge remote-tracking branch 'iwlwifi-fixes/master' into NEXTEmmanuel Grumbach
2014-09-03iwlwifi: add Intel Mobile Communications copyrightJohannes Berg
Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-09-01iwlwifi: bump firmware API version to 10 for 7000 and 8000Emmanuel Grumbach
New firmware on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-07-21iwlwifi: add max RX aggregation sizeOren Givon
Allow to configure the maximal Rx AMPDU size per device. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: mvm: fixes for 8000 NVM flowEran Harary
The nvm_file should be loaded by default for SDIO procucts only. Change the configuration accordingly. While at it, fix a typo in the device name. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-06-24iwlwifi: bump API version for 8000 devicesEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: 8000: add default NVM file name in family 8000Eran Harary
The 8000 family products need a file on the file system which is used as NVM. This file is a must, if no filename is supplied as module parameter, use a default filename. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: fix bug with OTP memory sizeEran Harary
OTP size changed in family 7000 and in family 8000. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-06iwlwifi: 8000: add 11n only SKU of 8000 devicesAriej Marjieh
The 8000 family includes devices that don't support 11ac. Add an iwl_cfg structure for them. Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-03iwlwifi: mvm: support NVM sections for family 8000Eran Harary
The identification of the hardware section in the NVM of new devices has been changed, hence the need to add it to iwl_cfg and adapt the code that uses this value accordingly. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-02-03iwlwifi: Add 8000 HW family supportEran Harary
add 8000-family configuration to iwl_cfg struct. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit (git 2.34.1) at 2025-07-25 15:04:46 +0000