summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7925
AgeCommit message (Collapse)Author
2025-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2). No conflicts. Adjacent changes: drivers/net/wireless/mediatek/mt76/mt7925/mcu.c c701574c5412 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan") b3a431fe2e39 ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()") drivers/net/wireless/mediatek/mt76/mt7996/mac.c 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()") dc66a129adf1 ("wifi: mt76: add a wrapper for wcid access with validation") drivers/net/wireless/mediatek/mt76/mt7996/main.c 3dd6f67c669c ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()") 8989d8e90f5f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()") net/mac80211/cfg.c 58fcb1b4287c ("wifi: mac80211: reject VHT opmode for unsupported channel widths") 037dc18ac3fb ("wifi: mac80211: add support for storing station S1G capabilities") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-07wifi: mt76: mt7925: Fix null-ptr-deref in mt7925_thermal_init()Henry Martin
devm_kasprintf() returns NULL on error. Currently, mt7925_thermal_init() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. Fixes: 396e41a74a88 ("wifi: mt76: mt7925: support temperature sensor") Signed-off-by: Henry Martin <bsdhenryma@tencent.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20250625124901.1839832-1-bsdhenryma@tencent.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: add a wrapper for wcid access with validationFelix Fietkau
Several places use rcu_dereference to get a wcid entry without validating if the index exceeds the array boundary. Fix this by using a helper function, which handles validation. Link: https://patch.msgid.link/20250707154702.1726-1-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: prevent NULL pointer dereference in ↵Deren Wu
mt7925_sta_set_decap_offload() Add a NULL check for msta->vif before accessing its members to prevent a kernel panic in AP mode deployment. This also fix the issue reported in [1]. The crash occurs when this function is triggered before the station is fully initialized. The call trace shows a page fault at mt7925_sta_set_decap_offload() due to accessing resources when msta->vif is NULL. Fix this by adding an early return if msta->vif is NULL and also check wcid.sta is ready. This ensures we only proceed with decap offload configuration when the station's state is properly initialized. [14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0 [14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G [14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE [14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) [14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common] [14739.851985] sp : ffffffc085efb500 [14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158 [14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001 [14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88 [14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000 [14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080 [14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000 [14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0 [14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100 [14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000 [14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8 [14739.926686] Call trace: [14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211] [14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211] [14739.946860] sta_info_move_state+0x1c/0x30 [mac80211] [14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211] [14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211] [14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211] [14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211] [14739.975516] genl_family_rcv_msg_doit+0xdc/0x150 [14739.980158] genl_rcv_msg+0x218/0x298 [14739.983830] netlink_rcv_skb+0x64/0x138 [14739.987670] genl_rcv+0x40/0x60 [14739.990816] netlink_unicast+0x314/0x380 [14739.994742] netlink_sendmsg+0x198/0x3f0 [14739.998664] __sock_sendmsg+0x64/0xc0 [14740.002324] ____sys_sendmsg+0x260/0x298 [14740.006242] ___sys_sendmsg+0xb4/0x110 Cc: stable@vger.kernel.org Link: https://github.com/morrownr/USB-WiFi/issues/603 [1] Fixes: b859ad65309a ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Link: https://patch.msgid.link/35aedbffa050e98939264300407a52ba4e236d52.1748149855.git.deren.wu@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: fix incorrect scan probe IE handling for hw_scanMing Yen Hsieh
The IEs should be processed and filled into the command tlv separately according to each band. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250616063649.1100503-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scanMichael Lo
Update the destination index to use 'n_ssids', which is incremented only when a valid SSID is present. Previously, both mt76_connac_mcu_hw_scan() and mt7925_mcu_hw_scan() used the loop index 'i' for the destination array, potentially leaving gaps if any source SSIDs had zero length. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250612062046.160598-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-07wifi: mt76: mt7925: fix the wrong config for tx interruptMing Yen Hsieh
MT_INT_TX_DONE_MCU_WM may cause tx interrupt to be mishandled during a reset failure, leading to the reset process failing. By using MT_INT_TX_DONE_MCU instead of MT_INT_TX_DONE_MCU_WM, the handling of tx interrupt is improved. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250612060931.135635-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-07-03wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()Dan Carpenter
The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS elements so this >= needs to be > to prevent an out of bounds access. Fixes: 8284815ca161 ("wifi: mt76: mt7925: add RNR scan support for 6GHz") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aDVT2tPhG_8T0Qla@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-06-24wifi: cfg80211/mac80211: Add support to get radio indexRoopni Devanathan
Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-22Merge tag 'wireless-next-2025-05-22' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Lots of new things, notably: * ath12k: monitor mode for WCN7850, better 6 GHz regulatory * brcmfmac: SAE for some Cypress devices * iwlwifi: rework device configuration * mac80211: scan improvements with MLO * mt76: EHT improvements, new device IDs * rtw88: throughput improvements * rtw89: MLO, STA/P2P concurrency improvements, SAR * tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (389 commits) wifi: mt76: mt7925: add rfkill_poll for hardware rfkill wifi: mt76: support power delta calculation for 5 TX paths wifi: mt76: fix available_antennas setting wifi: mt76: mt7996: fix RX buffer size of MCU event wifi: mt76: mt7996: change max beacon size wifi: mt76: mt7996: fix invalid NSS setting when TX path differs from NSS wifi: mt76: mt7996: drop fragments with multicast or broadcast RA wifi: mt76: mt7996: set EHT max ampdu length capability wifi: mt76: mt7996: fix beamformee SS field wifi: mt76: remove capability of partial bandwidth UL MU-MIMO wifi: mt76: mt7925: add test mode support wifi: mt76: mt7925: extend MCU support for testmode wifi: mt76: mt7925: ensure all MCU commands wait for response wifi: mt76: mt7925: refine the sniffer commnad wifi: mt76: mt7925: prevent multiple scan commands wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init() wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init() wifi: mt76: mt7925: add RNR scan support for 6GHz wifi: mt76: add mt76_connac_mcu_build_rnr_scan_param routine wifi: mt76: scan: Fix 'mlink' dereferenced before IS_ERR_OR_NULL check ... ==================== Link: https://patch.msgid.link/20250522165501.189958-50-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22wifi: mt76: mt7925: add rfkill_poll for hardware rfkillAllan Wang
Add mac80211 rfkill_poll ops to monitor hardware rfkill state and state change will be updated. Signed-off-by: Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20250507053131.4173691-1-allan.wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: add test mode supportMichael Lo
The test mode interface allows controlled execution of chip-level operations such as continuous transmission, reception tests, and register access, which are essential during bring-up, diagnostics, and factory testing. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Michael Lo <michael.lo@mediatek.com> Link: https://patch.msgid.link/20250505233618.1951021-2-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: extend MCU support for testmodeMichael Lo
Add MCU command and its handling needed for testmode support on MT7925. This enables low-level chip testing features such as continuous TX/RX.. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Michael Lo <michael.lo@mediatek.com> Link: https://patch.msgid.link/20250505233618.1951021-1-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: ensure all MCU commands wait for responseMichael Lo
Modify MCU command sending functions to wait for a response, ensuring consistent behavior across all commands and improves reliability by confirming that each command is processed successfully. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250414013954.1151774-3-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: refine the sniffer commnadMing Yen Hsieh
Remove a duplicate call to `mt76_mcu_send_msg` to fix redundant operations in the sniffer command handling. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250414013954.1151774-2-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: prevent multiple scan commandsMing Yen Hsieh
Add a check to ensure only one scan command is active at a time by testing the MT76_HW_SCANNING state. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250414013954.1151774-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: add RNR scan support for 6GHzMing Yen Hsieh
Enhance the mt7925 to include RNR scan support. It adds the necessary RNR information to the scan command. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250321013829.3598-2-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: fix host interrupt register initializationMichael Lo
ensure proper interrupt handling and aligns with the hardware spec by updating the register offset for MT_WFDMA0_HOST_INT_ENA. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509083512.455095-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: introduce thermal protectionLeon Yen
Add thermal protection to prevent the chip from possible overheating due to prolonged high traffic and adverse operating conditions. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509082117.453819-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: add EHT preamble puncturingAllan Wang
Add mt7925 EHT preamble puncturing. Signed-off-by: Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20250401083525.2734333-1-allan.wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: Fix logical vs bitwise typoDan Carpenter
This was supposed to be & instead of &&. Fixes: f0317215b367 ("wifi: mt76: mt7925: add EHT control support based on the CLC data") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/d323a443-4e81-4064-8563-b62274b53ef4@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-15wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtblMing Yen Hsieh
Ensure that the hdr_trans_tlv command is included in the broadcast wtbl to prevent the IPv6 and multicast packet from being dropped by the chip. Cc: stable@vger.kernel.org Fixes: cb1353ef3473 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd") Reported-by: Benjamin Xiao <fossben@pm.me> Tested-by: Niklas Schnelle <niks@kernel.org> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://lore.kernel.org/lkml/EmWnO5b-acRH1TXbGnkx41eJw654vmCR-8_xMBaPMwexCnfkvKCdlU5u19CGbaapJ3KRu-l3B-tSUhf8CCQwL0odjo6Cd5YG5lvNeB-vfdg=@pm.me/ Link: https://patch.msgid.link/20250509010421.403022-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-19wifi: mt76: mt7925: add MTCL support to enhance the regulatory complianceMing Yen Hsieh
Apply the MTCL configuration to improving channel availability and regulatory compliance if MTCL table is supported. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250304113649.867387-6-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: remove unused acpi function for clcMing Yen Hsieh
The code for handling ACPI configuration in CLC was copied from the mt7921 driver but is not utilized in the mt7925 implementation. So removes the unused functionality to clean up the codebase. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250304113649.867387-4-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: update the channel usage when the regd domain changedMing Yen Hsieh
The 5.9/6GHz channel license of a certain platform device has been regulated in various countries. That may be difference with standard Liunx regulatory domain settings. In this case, when .reg_notifier() called for regulatory change, mt7925 chipset should update the channel usage based on CLC data. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250304113649.867387-3-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: add EHT control support based on the CLC dataMing Yen Hsieh
Some countries do not support EHT modulation for now. To prevent violating regulations, the MT7925 chipset should control the EHT capabilities. Therefore, when a regulatory domain change is detected during scanning, the `mt7925_regd_be_ctrl` will process the CLC data to update the EHT capabilities. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250304113649.867387-2-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: load the appropriate CLC data based on hardware typeMing Yen Hsieh
Read the EEPROM to determine the hardware type and uses this to load the correct CLC data. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250304113649.867387-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: update the power-saving flowMing Yen Hsieh
After joining MLO, ensure that all links are setup before enabling power-saving. Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Cc: stable@vger.kernel.org Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Caleb Jorden <cjorden@gmail.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250305000851.493671-6-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmdMing Yen Hsieh
Integrate *mlo_sta_cmd and *sta_cmd for the MLO firmware. Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Cc: stable@vger.kernel.org Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Caleb Jorden <cjorden@gmail.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250305000851.493671-5-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: adjust rm BSS flow to prevent next connection failureMing Yen Hsieh
Removing BSS without removing STAREC first will cause firmware abnormal and next connection fail. Fixes: 816161051a03 ("wifi: mt76: mt7925: Cleanup MLO settings post-disconnection") Cc: stable@vger.kernel.org Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Caleb Jorden <cjorden@gmail.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250305000851.493671-4-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: fix the wrong simultaneous cap for MLOMing Yen Hsieh
The mt7925 chip is only support a single radio, so the maximum number of simultaneous should be 0. Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it") Cc: stable@vger.kernel.org Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Caleb Jorden <cjorden@gmail.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250305000851.493671-3-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: fix the wrong link_idx when a p2p_device is presentMing Yen Hsieh
When the p2p device and MLO station are running concurrently, the p2p device will occupy the wrong link_idx when the MLO secondary link is added. Fixes: 9e4c3a007f01 ("wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO") Cc: stable@vger.kernel.org Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Caleb Jorden <cjorden@gmail.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250305000851.493671-2-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO"Sean Wang
For MLO, mac80211 will send the BA action for each link to the driver, so the driver does not need to handle it itself. Therefore, revert this patch. Fixes: eb2a9a12c609 ("wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO") Cc: stable@vger.kernel.org Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Tested-by: Caleb Jorden <cjorden@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/20250305000851.493671-1-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: Simplify HIF suspend handling to avoid suspend failQuan Zhou
System suspend failures may occur due to inappropriate handling of traffic not idle event by the WiFi driver. The WiFi firmware's traffic not idle indication does not need to be tied to suspend. Fix the flow to ensuring the system can suspend properly. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/34208c7280325f57a651363d339399eb1744d3b7.1740400998.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: Remove unnecessary if-checkThorsten Blum
The if and else branches implement the same logic. Remove the unnecessary if-check and simplify the code. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250223232127.99357-2-thorsten.blum@linux.dev Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: fix country count limitation for CLCMing Yen Hsieh
Due to the increase in the number of power tables for 6Ghz on CLC, the variable nr_country is no longer sufficient to represent the total quantity. Therefore, we have switched to calculating the length of clc buf to obtain the correct power table. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250116062131.3860198-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: ensure wow pattern command align fw formatMing Yen Hsieh
Align the format of "struct mt7925_wow_pattern_tlv" with firmware to ensure proper functionality. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250116055925.3856856-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: fix fails to enter low power mode in suspend stateQuan Zhou
The mt7925 sometimes fails to enter low power mode during suspend. This is caused by the chip firmware sending an additional ACK event to the host after processing the suspend command. Due to timing issues, this event may not reach the host, causing the chip to get stuck. To resolve this, the ACK flag in the suspend command is removed, as it is not needed in the MT7925 architecture. This prevents the firmware from sending the additional ACK event, ensuring the device can reliably enter low power mode during suspend. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/d056938144a3a0336c3a4e3cec6f271899f32bf7.1736775666.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-03-19wifi: mt76: mt7925: introduce MLO capability controlMing Yen Hsieh
This patch introduces MLO capability control for the MT792x Wi-Fi driver. It removes the unused `MT792x_CHIP_CAP_MLO_EVT_EN` flag and introduces new capability flags `MT792x_CHIP_CAP_MLO_EN` and `MT792x_CHIP_CAP_MLO_EML_EN` to enable MLO and EML features based on firmware capabilities. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com> Link: https://patch.msgid.link/20250217081729.1840930-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-27wifi: mt76: move napi_enable() from under BHJakub Kicinski
mt76 does a lot of: local_bh_disable(); napi_enable(...napi); napi_schedule(...napi); local_bh_enable(); local_bh_disable() is not a real lock, its most likely taken because napi_schedule() requires that we invoke softirqs at some point. napi_enable() needs to take a mutex, so move it from under the BH protection. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14wifi: mt76: connac: adjust phy capabilities based on band constraintsHoward Hsu
Adjust HE and EHT phy capabilities based on the band constraints. For 2g band, we shall not enable the capabilities above 40MHz. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250114101026.3587702-5-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925e: fix too long of wifi resume timeQuan Zhou
The mt7925e takes a long time to resume in platform resume scenarios. This is due to the mt7925 reconfiguring the tx power for each wifi channel during resume. By streamlining the process and removing redundant power configurations, the resume time for the mt7925 can be shortened. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/f075d43d87a5eefa5869baf755e9986edf735860.1735910836.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: add handler to hif suspend/resume eventQuan Zhou
When the system suspend or resume, the WiFi driver sends an hif_ctrl command to the firmware and waits for an event. Due to changes in the event format reported by the chip, the current mt7925's driver does not account for these changes, resulting in command timeout. Add flow to handle hif_ctrl event to avoid command timeout. We also exented API mt76_connac_mcu_set_hif_suspend for connac3 this time. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/3a0844ff5162142c4a9f3cf7104f75076ddd3b87.1735910562.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: fix CLC command timeout when suspend/resumeQuan Zhou
When enter suspend/resume while in a connected state, the upper layer will trigger disconnection before entering suspend, and at the same time, it will trigger regd_notifier() and update CLC, causing the CLC event to not be received due to suspend, resulting in a command timeout. Therefore, the update of CLC is postponed until resume, to ensure data consistency and avoid the occurrence of command timeout. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/bab00a2805d0533fd8beaa059222659858a9dcb5.1735910455.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: mt7925: fix the unfinished command of regd_notifier before suspendQuan Zhou
Before entering suspend, we need to ensure that all MCU command are completed. In some cases, such as with regd_notifier, there is a chance that CLC commands, will be executed before suspend. Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Link: https://patch.msgid.link/3af7b4e5bf7437832b016e32743657d1d55b1f9d.1735910288.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: connac: rework connac helpersShayne Chen
Rework connac helpers related to rate and phymode. This is a preliminary patch to add MLO support for mt7996 chipsets. Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250102163508.52945-21-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: connac: prepare mt76_connac_mcu_sta_basic_tlv for MLO supportFelix Fietkau
Pass in struct ieee80211_bss_conf in order to use link specific data. Link: https://patch.msgid.link/20250102163508.52945-19-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: remove dev->wcid_phy_maskFelix Fietkau
Explicitly check wcid->phy_idx instead. Reduces allocated data size. Link: https://patch.msgid.link/20250102163508.52945-8-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-01-14wifi: mt76: initialize more wcid fields mt76_wcid_initFelix Fietkau
Reduces code duplication and ensures that the phy index is always set. Link: https://patch.msgid.link/20250102163508.52945-6-nbd@nbd.name Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-07-31 04:41:20 +0000