summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rtlwifi/rtl8192cu
AgeCommit message (Collapse)Author
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-25rtlwifi: rtl8192cu: Add new device IDAdrien Schildknecht
The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043 Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me> Cc: Stable <stable@vger.kernel.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-18rtlwifi: rtl8192cu: Remove and replace routine in hw.c and mac.cTaehee Yoo
I remove duplicated routines which related rtl92cu_set_hw_reg(). 1. rtl92c_set_qos() and HW_VAR_AC_PARAM routine are similar code. so i replace code with rtlpriv->cfg->ops->set_hw_reg(). 2. rtl92c_set_mac_addr() and 'HW_VAR_ETHER_ADDR' case at rtl92cu_set_hw_reg() routine are similar code. so i removed rtl92c_set_mac_addr() function. also it was not used anywhere. 3. remove HW_VAR_ACM_CTRL routine in rtl92cu_set_hw_reg(). if rtl_usb->acm_method is not EACMWAY2_SW, HW_VAR_ACM_CTRL is called from HW_VAR_AC_PARAM. but it never called. because acm_method is always EACMWAY2_SW. so i remove acm_method check routine and HW_VAR_ACM_CTRL routine. both usb and pci interface is not used HW_VAR_ACM_CTRL. but i can't test pci interface module, so i didn't modify pci code. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-18rtlwifi: rtl8192cu: remove duplicated routine in hw.c and mac.cTaehee Yoo
rtl92c_set_xxx_filter is same routine with rtl92cu_set_hw_reg. so i remove those functions that are rtl92c_set_xxx_filter. (rtl92c_get_xxx_filter is also same reason.) also i add code updating struct rtl_mac member variable in the rtl92cu_set_hw_reg. after that, no more _update_mac_setting is not useful. thus i remove that. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21rtlwifi: rtl8192cu: Remove rtl8723 codeTaehee Yoo
In the rtlwifi/rtl8192cu, rtl8723 code is dead code. So I remove it. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15rtlwifi: rtl8192cu: Fix variable isfirst_ampduTaehee Yoo
rtl92cu_rx_query_desc set a isampdu twice. but second code is related to isfirst_ampdu. so i change it. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15rtlwifi: rtl8192cu: debug message change "RTL8192CE" to "RTL8192CU"Taehee Yoo
In the rtlwifi/rtl8192cu, I change debug message "RTL8192CE" to "RTL8192CU". Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15rtlwifi: rtl8192cu: remove duplicated routine in ↵Taehee Yoo
_rtl92c_phy_rf6052_config_parafile in the _rtl92c_phy_rf6052_config_parafile(), cases RF90_PATH_A and RF90_PATH_B call the same routine. so i remove one of these routine. also the return routine is duplicated. so i remove it. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15rtlwifi: rtl8192cu: remove INTF_PCI and INTF_USBTaehee Yoo
in the rtlwifi/rtl8192cu, INTF_PCI and INTF_USB is unnecessary. because RTL8192CU chipset is only USB interface. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15rtlwifi: rtl8192cu: remove _InitBeaconParameters().Taehee Yoo
_InitBeaconParameters() and rtl92cu_init_beacon_parameters() is same routine. I remove both functions. then i add _rtl92cu_init_beacon_parameters() in the hw.c. _rtl92cu_init_beacon_parameters() is same routine with _InitBeaconParameters(). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-15rtlwifi: rtl8192cu: remove IS_HARDWARE_TYPE_8192CE and IS_HARDWARE_TYPE_8192CUTaehee Yoo
in the rtlwifi/rtl8192cu, IS_HARDWARE_TYPE_8192CE and IS_HARDWARE_TYPE_8192CU is unnecessary. because rtlwifi/rtl8192cu codes aren't shared. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08rtlwifi: rtl8192cu: Fix performance issue.Taehee Yoo
After physical reconnect, the rtl8192cu chipset shows low transmission rates.It cause is that variable "iqk_initialized" do not de-initialized. So I add this code. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26rtlwifi: rtl8192cu: Remove rtl92c_init_beacon_max_error's parameterTaehee Yoo
parameter "infra_mode" of rtl92c_init_beacon_max_error() is not used. so i remove this. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26rtlwifi: rtl8192cu: Remove setting REG_BCN_MAX_ERR code in ↵Taehee Yoo
_rtl92cu_set_media_status(). Initialization routine set REG_BCN_MAX_ERR to 0xFF. also _rtl92cu_set_media_status set REG_BCN_MAX_ERR to same value. so i remove this code. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30rtlwifi: rtl8192cu: Add new device IDMarek Vasut
Add new ID for ASUS N10 WiFi dongle. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: John W. Linville <linville@tuxdriver.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30rtlwifi: rtl8192cu: Add new USB IDLarry Finger
USB ID 2001:330d is used for a D-Link DWA-131. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30rtlwifi: Change REG_CR+2 to MSRTaehee Yoo
I changed REG_CR+2 and (MSR) to MSR because MSR is defined as (REG_CR + 2). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13rtlwifi: rtl8192cu: remove unused arguments from _beacon_function_enable()Taehee Yoo
Remove unnecessary parameter in rtl8192cu/hw.c Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03rtlwifi: rtl8192cu: Add case in rtl92cu_get_hw_regTaehee Yoo
Add HAL_DEF_WOWLAN case in rtl92cu_get_hw_reg Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03rtlwifi: Remove unused RF6052_MAX_REG definePriit Laes
Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03rtlwifi: Remove unused defines from rtl8192cu driverPriit Laes
Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-26rtlwifi: Clear ACM_CTRL AC3_VO bit correctlyJes Sorensen
All hw driver components in the rtlwifi driver, except for the rtl8192de component has this bug. They would clear BE bit in the ACM_CTRL register instead of the VO bit when processing the VO queue. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27rtlwifi: rtl8192cu: Set fw_ready flagTaehee Yoo
After rtl8192cu download firmware routine, set fw_ready flag. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27rtl8192cu: fix the mesh beaconingChun-Yeow Yeoh
Patch "rtlwifi: add support to send beacon frame" allows the beaconing of rtl8192cu. But mesh beaconing is not working. Fix this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-24rtlwifi: rtl8821ae: Switch to use common rate control routineLarry Finger
With this change, all of the drivers now use the common routine. As this driver has VHT capability, an additional parameter is needed, thus all the drivers had to be modified. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-24rtlwifi: rtl8192cu: Rework calls to rate-control routineLarry Finger
The code uses macros to determine the parameters that are passed to the rate setting routine. A simpler method is implemented. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-24rtlwifi: Convert all drivers to use a common set of rate descriptorsLarry Finger
This common set of rate descriptors is renamed to be DESC_RATExx. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-24rtlwifi: Remove extraneous argument for rate mappingLarry Finger
Four of the drivers (92ce, 92cu, 92de, and 92se) supply an argument to the rate-mapping routine that is never used, thus it can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-15rtlwifi: rtl8192cu: Fix sparse non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/wireless/rtlwifi/rtl8192cu/hw.c:1595:6: warning: symbol 'usb_cmd_send_packet' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-23rtl8192cu: Prevent Ooops under rtl92c_set_fw_rsvdpagepktKarsten Wiese
rtl92c_set_fw_rsvdpagepkt is used by rtl8192cu and its pci sibling rtl8192ce. rtl_cmd_send_packet crashes when called inside rtl8192cu because it works on memory allocated only by rtl8192ce. Fix the crash by calling a dummy function when used in rtl8192cu. Comparision with the realtek vendor driver makes me think, something is missing in the dummy function. Short test as WPA2 station show good results connected to an 802.11g basestation. Traffic stops after few MBytes as WPA2 station connected to an 802.11n basestation. Signed-off-by: Karsten Wiese <fzuuzf@googlemail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-23rtl8192cu: Fix for rtlwifi's bluetooth coexist functionalityKarsten Wiese
Initialize function pointer with a function indicating bt coexist is not there. Prevents Ooops. Signed-off-by: Karsten Wiese <fzuuzf@googlemail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30rtlwifi: rtl8188ee: rtl8192com: rtl8192cu: rtl8192ee: rtl8723ae: rtl87323be: ↵Larry Finger
rtl8821ae: Use common cmd_send_packet A locking problem was found in routine _rtl92ee_cmd_send_packet() that led to system freezes. Upon inspection, several drivers had the same problem; however, the routines all used the same code. The common code has been moved into rtlwifi. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30rtlwifi: rtl8192ce: rtl8192common: Update for latest version of Realtek driversLarry Finger
Realtek released new drivers on 06/28/2014. These changes implement all their changes into the kernel version of the driver. In addition, these modifications are part of the process of unifying the Realtek and kernel code bases. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14Larry Finger
This patch updates the driver to match the latest Realtek release, and it is an important step in getting the internal code source at Realtek to match the code in the kernel. The primary reason for this is to make it easier for Realtek to maintain the kernel source without requiring an intermediate like me. In this process of merging the two source repositories, there are a lot of changes in both, and this commit is rather large. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25rtlwifi: rtl8192cu: Add new IDLarry Finger
The Sitecom WLA-2102 adapter uses this driver. Reported-by: Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nico Baggus <nico-linux@noci.xs4all.nl> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25rtlwifi/rtl8192c[eu]: Fix media status register maskRickard Strandqvist
bt_msr & 0xfc will never match 0x3. Fix this by using a mask that actually matches the available types. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29rtlwifi: rtl8192cu: remove check for CONFIG_AUTOSUSPENDPaul Bolle
A check for CONFIG_AUTOSUSPEND was included in this driver when it was added in v2.6.39. But that Kconfig symbol doesn't exist. Remove that check and the single line it hides. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-06RTL8192CU: Increase max APFM_ONMAC polling countAndy Spencer
With certain hardware combinations the poll interval is exceeded before initialization completes. Tested on a MacBookPro10,1 using a Sabrent USB-A11N USB adapter. Signed-off-by: Andy Spencer <andy753421@ucla.edu> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()Ben Hutchings
Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-06rtlwifi: rtl8192cu: Fix too long disable of IRQsLarry Finger
In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192cu. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-06rtlwifi: Move common routines to coreLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-06rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: rtl8192se: rtl8723ae: rtl8723be: ↵Larry Finger
rtl8188eu: Modify for new API The addition of a driver for the RTL8821AE requires a new API for the fill_tx_desc() and set_desc() callback routines. This commit makes the appropriate modifications in all the other drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-04rtlwifi: Prepare existing drivers for new driverLarry Finger
A driver for the RTL8723BE will soon be added. This patch adds the necessary parts to the common headers, and modifies the existing drivers for those changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-24rtlwifi: avoid accessing RCR directlyPeter Wu
The rtl*_set_check_bssid functions are mostly the same, but access the RCR register in different ways. Use the get_hw_reg abstraction layer (which reads rtlpci->receive_config for PCI devices and mac->rx_conf for USB). There is no functional change for cases where receive_config was accessed directly. For rtl8192ce, there is still no change because nothing modifies REG_RCR or receive_config. For rtl8192cu, it now also applies changes to rx_conf from configure_filter, but that can be considered a bug which is fixed later. Signed-off-by: Peter Wu <lekensteyn@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13rtlwifi: rtl8192cu: Add new device IDLarry Finger
Reported-by: Jan Prinsloo <janroot@gmail.com> Tested-by: Jan Prinsloo <janroot@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Update table.cMark Cave-Ayland
The latest vendor driver has some new values. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Bring rtl92cu_phy_bb_config() up to dateMark Cave-Ayland
The latest vendor driver contains some changes not in the kernel version. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Bring _rtl92c_phy_iq_calibrate() in line with the vendor driverMark Cave-Ayland
Bring _rtl92c_phy_iq_calibrate() in line with the vendor driver function _PHY_IQCalibrate(). Also fix incorrect initialisation for rtl8192cu. Signed-of-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Fix some code in RF handlingLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-07-28 22:30:10 +0000