| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Pull bitmap updates from Yury Norov:
- FIELD_PREP_WM16() consolidation (Nicolas)
- bitmaps for Rust (Burak)
- __fls() fix for arc (Kees)
* tag 'bitmap-for-6.18' of https://github.com/norov/linux: (25 commits)
rust: add dynamic ID pool abstraction for bitmap
rust: add find_bit_benchmark_rust module.
rust: add bitmap API.
rust: add bindings for bitops.h
rust: add bindings for bitmap.h
phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro
clk: sp7021: switch to FIELD_PREP_WM16 macro
PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro
PCI: rockchip: Switch to FIELD_PREP_WM16* macros
net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro
ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro
drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros
phy: rockchip-usb: switch to FIELD_PREP_WM16 macro
drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro
drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro
phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro
drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro
drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros
phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro
drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Use the startup/shutdown callbacks for the PCI/MSI per device
interrupt domains.
This allows us to initialize the RISCV PLIC interrupt hierarchy
correctly and provides a mechanism to decouple the masking and
unmasking during run-time from the expensive PCI mask and unmask when
the underlying MSI provider implementation allows the interrupt to be
masked.
- Initialize the RISCV PLIC MSI interrupt hierarchy correctly so that
the affinity assignment works correctly by switching it over to the
startup/shutdown scheme
- Allow MSI providers to opt out from masking a PCI/MSI interrupt at
the PCI device during operation when the provider can mask the
interrupt at the underlying interrupt chip. This reduces the overhead
in scenarios where disable_irq()/enable_irq() is utilized frequently
by a driver.
The PCI/MSI device level [un]masking is only required on startup and
shutdown in this case.
- Remove the conditional mask/unmask logic in the PCI/MSI layer as this
is now handled unconditionally.
- Replace the hardcoded interrupt routing in the Loongson EIOINTC
interrupt driver to respect the firmware settings and spread them out
to different CPU interrupt inputs so that the demultiplexing handler
only needs to read only a single 64-bit status register instead of
four, which significantly reduces the overhead in VMs as the status
register access causes a VM exit.
- Add support for the new AST2700 SCU interrupt controllers
- Use the legacy interrupt domain setup for the Loongson PCH-LPC
interrupt controller, which resembles the x86 legacy PIC setup and
has the same hardcoded legacy requirements.
- The usual set of cleanups, fixes and improvements all over the place
* tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/loongson-pch-lpc: Use legacy domain for PCH-LPC IRQ controller
PCI/MSI: Remove the conditional parent [un]mask logic
irqchip/msi-lib: Honor the MSI_FLAG_PCI_MSI_MASK_PARENT flag
irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers
dt-bindings: interrupt-controller: aspeed: Add AST2700 SCU IC compatibles
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization
irqchip/gic-v5: Fix error handling in gicv5_its_irq_domain_alloc()
irqchip/gic-v5: Fix loop in gicv5_its_create_itt_two_level() cleanup path
irqchip/gic-v5: Delete a stray tab
irqchip/sg2042-msi: Set irq type according to DT configuration
riscv: sophgo: dts: sg2044: Change msi irq type to IRQ_TYPE_EDGE_RISING
riscv: sophgo: dts: sg2042: Change msi irq type to IRQ_TYPE_EDGE_RISING
irqchip/gic-v2m: Handle Multiple MSI base IRQ Alignment
irqchip/renesas-rzg2l: Remove dev_err_probe() if error is -ENOMEM
irqchip: Use int type to store negative error codes
irqchip/gic-v5: Remove the redundant ITS cache invalidation
PCI/MSI: Check MSI_FLAG_PCI_MSI_MASK_PARENT in cond_[startup|shutdown]_parent()
irqchip/loongson-eiointc: Add multiple interrupt pin routing support
irqchip/loongson-eiointc: Route interrupt parsed from bios table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull ffs const-attribute cleanups from Kees Cook:
"While working on various hardening refactoring a while back we
encountered inconsistencies in the application of __attribute_const__
on the ffs() family of functions.
This series fixes this across all archs and adds KUnit tests.
Notably, this found a theoretical underflow in PCI (also fixed here)
and uncovered an inefficiency in ARC (fixed in the ARC arch PR). I
kept the series separate from the general hardening PR since it is a
stand-alone "topic".
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's
ffs()-family of functions.
- Add KUnit tests for ffs() behavior and const-ness"
* tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
KUnit: ffs: Validate all the __attribute_const__ annotations
sparc: Add __attribute_const__ to ffs()-family implementations
xtensa: Add __attribute_const__ to ffs()-family implementations
s390: Add __attribute_const__ to ffs()-family implementations
parisc: Add __attribute_const__ to ffs()-family implementations
mips: Add __attribute_const__ to ffs()-family implementations
m68k: Add __attribute_const__ to ffs()-family implementations
openrisc: Add __attribute_const__ to ffs()-family implementations
riscv: Add __attribute_const__ to ffs()-family implementations
hexagon: Add __attribute_const__ to ffs()-family implementations
alpha: Add __attribute_const__ to ffs()-family implementations
sh: Add __attribute_const__ to ffs()-family implementations
powerpc: Add __attribute_const__ to ffs()-family implementations
x86: Add __attribute_const__ to ffs()-family implementations
csky: Add __attribute_const__ to ffs()-family implementations
bitops: Add __attribute_const__ to generic ffs()-family implementations
KUnit: Introduce ffs()-family tests
PCI: Test for bit underflow in pcie_set_readrq()
|
|
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Fix mvebu PCI enumeration regression caused by converting to
for_each_of_range() iterator (Klaus Kudielka)
* tag 'pci-v6.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: mvebu: Fix use of for_each_of_range() iterator
|
|
vga_is_firmware_default() checks firmware resources to find the owner
framebuffer resources to find the firmware PCI device. This is an
open coded implementation of screen_info_pci_dev(). Switch to using
screen_info_pci_dev() instead.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250811162606.587759-3-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Now that msi_lib_init_dev_msi_info() overwrites the irq_[un]mask()
callbacks when the MSI_FLAG_PCI_MSI_MASK_PARENT flag is set by the parent
domain, the conditional [un]mask logic is obsolete.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250903135433.444329373@linutronix.de
|
|
In preparation for the future commit ("bitops: Add __attribute_const__ to generic
ffs()-family implementations"), which allows GCC's value range tracker
to see past ffs(), GCC 8 on ARM thinks that it might be possible that
"ffs(rq) - 8" used here:
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
could wrap below 0, leading to a very large value, which would be out of
range for the FIELD_PREP() usage:
drivers/pci/pci.c: In function 'pcie_set_readrq':
include/linux/compiler_types.h:572:38: error: call to '__compiletime_assert_471' declared with attribute error: FIELD_PREP: value too large for the field
...
drivers/pci/pci.c:5896:6: note: in expansion of macro 'FIELD_PREP'
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
^~~~~~~~~~
If the result of the ffs() is bounds checked before being used in
FIELD_PREP(), the value tracker seems happy again. :)
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-pci/CA+G9fYuysVr6qT8bjF6f08WLyCJRG7aXAeSd2F7=zTaHHd7L+Q@mail.gmail.com/
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250905052836.work.425-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing
"ranges"") simplified code by using the for_each_of_range() iterator, but
it broke PCI enumeration on Turris Omnia (and probably other mvebu
targets).
Issue #1:
To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(),
which resolves to of_bus_pci_get_flags(), which already returns an
IORESOURCE bit field, and NOT the original flags from the "ranges"
resource.
Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove
the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore
the intended behavior.
Issue #2:
The driver needs target and attributes, which are encoded in the raw
address values of the "/soc/pcie/ranges" resource. According to
of_pci_range_parser_one(), the raw values are stored in range.bus_addr and
range.parent_bus_addr, respectively. range.cpu_addr is a translated version
of range.parent_bus_addr, and not relevant here.
Use the correct range structure member, to extract target and attributes.
This restores the intended behavior.
Fixes: 5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"")
Reported-by: Jan Palus <jpalus@fastmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Tested-by: Jan Palus <jpalus@fastmail.com>
Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com
|
|
With the introduction of the of_msi_xlate() function, the OF layer
provides an API to map a device ID and retrieve the MSI controller
node the ID is mapped to with a single call.
of_msi_map_id() is currently used to map a deviceID to a specific
MSI controller node; of_msi_xlate() can be used for that purpose
too, there is no need to keep the two functions.
Convert of_msi_map_id() to of_msi_xlate() calls and update the
of_msi_xlate() documentation to describe how the struct device_node
pointer passed in should be set-up to either provide the MSI controller
node target or receive its pointer upon mapping completion.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250805133443.936955-1-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The era of hand-rolled HIWORD_UPDATE macros is over.
Like many other Rockchip drivers, pcie-dw-rockchip brings with it its
very own flavour of HIWORD_UPDATE. It's occasionally used without a
constant mask, which complicates matters. HIWORD_UPDATE_BIT is a
confusingly named addition, as it doesn't update the bit, it actually
sets all bits in the value to 1. HIWORD_DISABLE_BIT is similarly
confusing; it disables several bits at once by using the value as a mask
and the inverse of value as the value, and the "disabling only these"
effect comes from the hardware actually using the mask. The more obvious
approach would've been HIWORD_UPDATE(val, 0) in my opinion.
This is part of the motivation why this patch uses hw_bitfield.h's
FIELD_PREP_WM16 instead, where possible. FIELD_PREP_WM16 requires a
constant bit mask, which isn't possible where the irq number is used to
generate a bit mask. For that purpose, we replace it with a more robust
macro than what was there but that should also bring close to zero
runtime overhead: we actually mask the IRQ number to make sure we're not
writing garbage.
For the remaining bits, there also are some caveats. For starters, the
PCIE_CLIENT_ENABLE_LTSSM and PCIE_CLIENT_DISABLE_LTSSM were named in a
manner that isn't quite truthful to what they do. Their modification
actually spans not just the LTSSM bit but also another bit, flipping
only the LTSSM one, but keeping the other (which according to the TRM
has a reset value of 0) always enabled. This other bit is reserved as of
the IP version RK3588 uses at least, and I have my doubts as to whether
it was meant to be set, and whether it was meant to be set in that code
path. Either way, it's confusing.
Replace it with just writing either 1 or 0 to the LTSSM bit, using the
new FIELD_PREP_WM16 macro from hw_bitfield.h, which grants us the
benefit of better compile-time error checking.
The change of no longer setting the reserved bit doesn't appear to
change the behaviour on RK3568 in RC mode, where it's not marked as
reserved.
PCIE_CLIENT_RC_MODE/PCIE_CLIENT_EP_MODE was another field that wasn't
super clear on what the bit field modification actually is. As far as I
can tell, switching to RC mode doesn't actually write the correct value
to the field if any of its bits have been set previously, as it only
updates one bit of a 4 bit field.
Replace it by actually writing the full values to the field, using the
new FIELD_PREP_WM16 macro, which grants us the benefit of better
compile-time error checking.
This patch was tested on RK3588 (PCIe3 x4 controller), RK3576 (PCIe2 x1
controller) and RK3568 (PCIe x2 controller), all in RC mode.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
The Rockchip PCI driver, like many other Rockchip drivers, has its very
own definition of HIWORD_UPDATE.
Remove it, and replace its usage with either FIELD_PREP_WM16, or two new
header local macros for setting/clearing a bit with the high mask, which
use FIELD_PREP_WM16_CONST internally. In the process, ENCODE_LANES
needed to be adjusted, as FIELD_PREP_WM16* shifts the value for us.
That this is equivalent was verified by first making all FIELD_PREP_WM16
instances FIELD_PREP_WM16_CONST, then doing a static_assert() comparing
it to the old macro (and for those with parameters, static_asserting for
the full range of possible values with the old encode macro).
What we get out of this is compile time error checking to make sure the
value actually fits in the mask, and that the mask fits in the register,
and also generally less icky code that writes shifted values when it
actually just meant to set and clear a handful of bits.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
For MSI controllers which only support MSI_FLAG_PCI_MSI_MASK_PARENT, the
newly added callback irq_startup() and irq_shutdown() for
pci_msi[x]_template will not unmask or mask the interrupt when startup()
resp. shutdown() is invoked. This prevents the interrupt from being
enabled resp. disabled.
Invoke irq_[un]mask_parent() in cond_[startup|shutdown]_parent(), when the
interrupt has the MSI_FLAG_PCI_MSI_MASK_PARENT flag set.
Fixes: 54f45a30c0d0 ("PCI/MSI: Add startup/shutdown for per device domains")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox/SG2042
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250827230943.17829-1-inochiama@gmail.com
Closes: https://lore.kernel.org/regressions/aK4O7Hl8NCVEMznB@monster/
Closes: https://lore.kernel.org/regressions/20250826220959.GA4119563@ax162/
Closes: https://lore.kernel.org/all/20250827093911.1218640-1-wei.fang@nxp.com/
|
|
As the RISC-V PLIC cannot apply affinity settings without invoking
irq_enable(), it will make the interrupt unavailble when used as an
underlying interrupt chip for the MSI controller.
Implement the irq_startup() and irq_shutdown() callbacks for the PCI MSI
and MSI-X templates.
For chips that specify MSI_FLAG_PCI_MSI_STARTUP_PARENT, the parent startup
and shutdown functions are invoked. That allows the interrupt on the parent
chip to be enabled if the interrupt has not been enabled during
allocation. This is necessary for MSI controllers which use PLIC as
underlying parent interrupt chip.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250813232835.43458-3-inochiama@gmail.com
|
|
d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") added a
WARN_ON sanity check that child devices support MSI-X, because VMD document
says [1]:
Intel VMD only supports MSIx Interrupts from child devices and therefore
the BIOS must enable PCIe Hot Plug and MSIx interrups [sic].
However, the VMD device can't even tell the difference between a child
device using MSI and one using MSI-X. Per 185a383ada2e ("x86/PCI: Add
driver for Intel Volume Management Device (VMD)"), VMD does not support
INTx interrupts, but does support child devices using either MSI or MSI-X.
Remove the sanity check to avoid the WARN_ON and allow child devices to use
MSI, reported by Ammar.
Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Link: https://cdrdv2-public.intel.com/776857/VMD_White_Paper.pdf [1]
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/aJXYhfc%2F6DfcqfqF@linux.gnuweeb.org/
Signed-off-by: Nam Cao <namcao@linutronix.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://patch.msgid.link/20250811053935.4049211-1-namcao@linutronix.de
|
|
f29861aa301c5 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
changed xilinx_pcie::msi_domain from child devices' interrupt domain to
Xilinx AXI bridge's interrupt domain.
However, xilinx_pcie_intr_handler() wasn't changed and still reads Xilinx
AXI bridge's interrupt domain from xilinx_pcie::msi_domain->parent. This
pointer is NULL now.
Update xilinx_pcie_intr_handler() to read the correct interrupt domain
pointer.
Fixes: f29861aa301c5 ("PCI: xilinx: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250811054144.4049448-1-namcao@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Fix vmd MSI interrupt domain restructure that caused crash early in
boot (Nam Cao)
* tag 'pci-v6.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: vmd: Fix wrong kfree() in vmd_msi_free()
|
|
vmd_msi_alloc() allocates struct vmd_irq and stashes it into
irq_data->chip_data associated with the VMD's interrupt domain.
vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and
frees it.
irq_get_chip_data() returns the chip_data associated with the top interrupt
domain. This worked in the past because VMD's interrupt domain was the top
domain.
But d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
changed the interrupt domain hierarchy so VMD's interrupt domain is not the
top domain anymore. irq_get_chip_data() now returns the chip_data at the
MSI devices' interrupt domains. It is therefore broken for vmd_msi_free()
to kfree() this chip_data.
Fix by extracting the chip_data associated with the VMD's interrupt domain.
Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()")
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/linux-pci/dfa40e48-8840-4e61-9fda-25cdb3ad81c1@panix.com/
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Closes: https://lore.kernel.org/linux-pci/ed53280ed15d1140700b96cca2734bf327ee92539e5eb68e80f5bbbf0f01@linux.gnuweeb.org/
Tested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Tested-by: Kenneth Crudup <kenny@panix.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250807081051.2253962-1-namcao@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fixes for several issues in the powernv PCI hotplug path
- Fix htmldoc generation for htm.rst in toctree
- Add jit support for load_acquire and store_release in ppc64 bpf jit
Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar
* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc64/bpf: Add jit support for load_acquire and store_release
docs: powerpc: add htm.rst to toctree
PCI: pnv_php: Enable third attention indicator state
PCI: pnv_php: Fix surprise plug detection and recovery
powerpc/eeh: Make EEH driver device hotplug safe
powerpc/eeh: Export eeh_unfreeze_pe()
PCI: pnv_php: Work around switches with broken presence detection
PCI: pnv_php: Clean up allocated IRQs on unplug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
|
- Remove resolved hotplug TODO item (Guilherme Giacomo Simoes)
- Fix typos (Bjorn Helgaas)
* pci/misc:
PCI: Fix typos
PCI: hotplug: Remove TODO about unused .get_power(), .hardware_test()
|
|
- Teach handle_simple_irq() to resend an in-progress interrupt (Marc
Zyngier)
- Defer probing if the MSI widget driver hasn't probed yet (Marc Zyngier)
- Drop useless conditional compilation, since pci-xgene.c is only compiled
when CONFIG_PCI_XGENE is selected (Marc Zyngier)
- Drop useless XGENE_PCIE_IP_VER_UNKN IP version (Marc Zyngier)
- Simplify and make per-CPU interrupt setup robust (Marc Zyngier)
- Drop superfluous struct xgene_msi fields (Marc Zyngier)
- Use device-managed memory allocations (Marc Zyngier)
- Drop intermediate xgene_msi_group tracking structure (Marc Zyngier)
- Rewrite pci-xgene-msi.c to fix MSI CPU affinity and clean things up (Marc
Zyngier)
- Resend an MSI racing with itself on a different CPU (Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
- Simplify MSI handler setup/teardown by dropping useless CPU hotplug bits
(Marc Zyngier)
- Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD (Marc Zyngier)
* pci/controller/xgene:
cpu/hotplug: Remove unused cpuhp_state CPUHP_PCI_XGENE_DEAD
PCI: xgene-msi: Restructure handler setup/teardown
PCI: xgene-msi: Probe as a standard platform driver
PCI: xgene-msi: Resend an MSI racing with itself on a different CPU
PCI: xgene-msi: Sanitise MSI allocation and affinity setting
PCI: xgene-msi: Get rid of intermediate tracking structure
PCI: xgene-msi: Use device-managed memory allocations
PCI: xgene-msi: Drop superfluous fields from xgene_msi structure
PCI: xgene-msi: Make per-CPU interrupt setup robust
PCI: xgene: Drop XGENE_PCIE_IP_VER_UNKN
PCI: xgene: Drop useless conditional compilation
PCI: xgene: Defer probing if the MSI widget driver hasn't probed yet
genirq: Teach handle_simple_irq() to resend an in-progress interrupt
|
|
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
* pci/controller/vmd:
PCI: vmd: Add VMD Device ID Support for Panther Lake (PTL)-H/P/U
|
|
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver in
Root Complex mode (Inochi Amaoto)
* pci/controller/sophgo:
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
dt-bindings: pci: Add Sophgo SG2044 PCIe host
|
|
- Fix log message that said "malformed TLP" when it should have said
"Unexpected Completion" (Hans Zhang)
- Fix log message that said "no fatal error" when it should have said "non
fatal error" (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
* pci/controller/rockchip-host:
PCI: rockchip-host: Remove unused header includes
PCI: rockchip-host: Correct non-fatal error log message
PCI: rockchip-host: Fix "Unexpected Completion" log message
|
|
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a chance
to train at a higher speed (Geraldo Nascimento)
* pci/controller/rockchip:
PCI: rockchip: Set Target Link Speed to 5.0 GT/s before retraining
PCI: rockchip: Use standard PCIe definitions
PCI: rockchip: Remove redundant PCIe message routing definitions
|
|
- Export DWC MSI controller related APIs for use by upcoming DWC-based ECAM
implementation (Mayank Rana)
- Rename gen_pci_init() to pci_host_common_ecam_create() and export for use
by controller drivers (Mayank Rana)
- Add DT binding and driver support for SA8255p, which supports ECAM for
Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port resets in
a Root Port stanza and deprecate describing them in the host bridge; this
makes it possible to support multiple Root Ports in the future (Krishna
Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Add support for parsing the new Root Port binding
dt-bindings: PCI: qcom: Move PHY & reset GPIO to Root Port node
PCI: qcom: Add support for Qualcomm SA8255p based PCIe Root Complex
dt-bindings: PCI: qcom,pcie-sa8255p: Document ECAM compliant PCIe root complex
PCI: host-generic: Rename and export gen_pci_init() for PCIe controller drivers
PCI: dwc: Export DWC MSI controller related APIs
|
|
- Use devm_add_action_or_reset() when adding port->clk devm cleanup action
so we don't have to explicitly call clk_put() (Salah Triki)
* pci/controller/mvebu:
PCI: mvebu: Use devm_add_action_or_reset() instead of devm_add_action()
|
|
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features (Richard
Zhu)
- Factor imx_pcie_add_lut_by_rid() out of imx_pcie_enable_device() for use
by LUT configuration (Frank Li)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can trigger
doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from imx_pcie_{assert,deassert}_core_reset(),
which fixes a hotplug regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Delay link start until configfs 'start' written
PCI: imx6: Remove apps_reset toggling from imx_pcie_{assert/deassert}_core_reset
PCI: imx6: Add LUT configuration for MSI/IOMMU in Endpoint mode
PCI: imx6: Add helper function imx_pcie_add_lut_by_rid()
PCI: imx6: Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features
|
|
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred Mallawa)
* pci/controller/dw-rockchip:
PCI: dw-rockchip: Delay link training after hot reset in EP mode
|
|
- Simplify debugfs 'return' statements (Hans Zhang)
- Make dw_pcie_ptm_ops static (Manivannan Sadhasivam)
* pci/controller/dwc:
PCI: dwc: Make dw_pcie_ptm_ops static
PCI: dwc: Simplify the return value of PTM debugfs functions returning bool
|
|
- Use PCIe Message routing types from the PCI core rather than defining
private ones (Hans Zhang)
* pci/controller/cadence:
PCI: cadence: Replace private message routing enums with PCI core definitions
|
|
- Add optional DT 'num-lanes' property and if present, use it to override
the Maximum Link Width advertised in Link Capabilities (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Replace open coded value with PCIE_T_RRS_READY_MS
MAINTAINERS: Drop Nicolas from maintaining pcie-brcmstb
PCI: brcmstb: Set MLW based on "num-lanes" DT property if present
dt-bindings: PCI: brcm,stb-pcie: Add num-lanes property
|
|
- Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS (the
required delay before sending config requests after a reset) (Niklas
Cassel)
- PCIE_T_RRS_READY_MS and PCIE_RESET_CONFIG_WAIT_MS were two names for the
same delay; replace PCIE_T_RRS_READY_MS with PCIE_RESET_CONFIG_WAIT_MS
and remove PCIE_T_RRS_READY_MS (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ to
dw-rockchip, qcom (Niklas Cassel)
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s in dwc core (Niklas Cassel)
- Move LINK_WAIT_SLEEP_MS and LINK_WAIT_MAX_RETRIES to pci.h and prefix
with 'PCIE_' for potential sharing across drivers (Niklas Cassel)
* pci/controller/linkup-fix:
PCI: Move link up wait time and max retries macros to pci.h
PCI: dwc: Ensure that dw_pcie_wait_for_link() waits 100 ms after link up
PCI: qcom: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: dw-rockchip: Wait PCIE_RESET_CONFIG_WAIT_MS after link-up IRQ
PCI: rockchip-host: Use macro PCIE_RESET_CONFIG_WAIT_MS
PCI: Rename PCIE_RESET_CONFIG_DEVICE_WAIT_MS to PCIE_RESET_CONFIG_WAIT_MS
|
|
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF dependency
in altera (fixes an unused variable), designware-host, mediatek,
mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma, xilinx-nwl (Jiri
Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc, mediatek,
mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx, xilinx-dma,
xilinx-nwl from using pci_msi_create_irq_domain() to using
msi_create_parent_irq_domain() instead; this makes the interrupt
controller per-PCI device, allows dynamic allocation of vectors after
initialization, and allows support of IMS (Nam Cao)
- Convert vmd to using lock guards to tidy the code (Nam Cao)
* pci/controller/msi-parent:
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
PCI: plda: Switch to msi_create_parent_irq_domain()
PCI: xilinx: Switch to msi_create_parent_irq_domain()
PCI: xilinx-nwl: Switch to msi_create_parent_irq_domain()
PCI: xilinx-xdma: Switch to msi_create_parent_irq_domain()
PCI: rcar-host: Switch to msi_create_parent_irq_domain()
PCI: mediatek: Switch to msi_create_parent_irq_domain()
PCI: mediatek-gen3: Switch to msi_create_parent_irq_domain()
PCI: iproc: Switch to msi_create_parent_irq_domain()
PCI: brcmstb: Switch to msi_create_parent_irq_domain()
PCI: altera-msi: Switch to msi_create_parent_irq_domain()
PCI: aardvark: Switch to msi_create_parent_irq_domain()
PCI: mobiveil: Switch to msi_create_parent_irq_domain()
PCI: dwc: Switch to msi_create_parent_irq_domain()
PCI: controller: Use dev_fwnode() instead of of_fwnode_handle()
|
|
- Return -ENOENT (not -1) if pci_epc_get_next_free_bar() fails (Jerome
Brunet)
- Align MW (memory window) naming with config names (Jerome Brunet)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
- Drop incorrect '__iomem' annotation on the return value of
pci_epf_alloc_space(); this also fixes an sparse warning (Manivannan
Sadhasivam)
* pci/endpoint/epf-vntb:
PCI: endpoint: pci-epf-vntb: Fix the incorrect usage of __iomem attribute
PCI: endpoint: pci-epf-vntb: Allow BAR assignment via configfs
PCI: endpoint: pci-epf-vntb: Align MW naming with config names
PCI: endpoint: pci-epf-vntb: Return -ENOENT if pci_epc_get_next_free_bar() fails
|
|
- Add RC-to-EP doorbell support using platform MSI controller (Frank Li)
- Check for MSI parent and mutability since we currently don't support
mutable MSI controllers (Frank Li)
- Add pci_epf_align_inbound_addr() helper (Frank Li)
- Add a doorbell test (Frank Li)
* pci/endpoint/doorbell:
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
|
|
- Fix configfs epf_group removal, which incorrectly did a list_del() on a
list head, not a list entry (Damien Le Moal)
* pci/endpoint/core:
PCI: endpoint: Fix configfs group removal on driver teardown
PCI: endpoint: Fix configfs group list head handling
|
|
- Restore VF resizable BAR state after reset (Michał Winiarski)
- Add pci_resource_num_to_vf_bar() and pci_resource_num_from_vf_bar() to
convert between VF BAR number and the dev->resource[] index (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size (Michał
Winiarski)
* pci/resources:
PCI/IOV: Allow drivers to control VF BAR size
PCI/IOV: Check that VF BAR fits within the reservation
PCI/IOV: Allow IOV resources to be resized in pci_resize_resource()
PCI/IOV: Add pci_resource_num_to_vf_bar() to convert VF BAR number to/from IOV resource
PCI/IOV: Restore VF resizable BAR state after reset
|
|
- Add optional slot clock for cases where the PCIe host controller and the
slot are supplied by different clocks (Marek Vasut)
- Fix kerneldoc tag for private fields (Bartosz Golaszewski)
* pci/pwrctrl:
PCI/pwrctrl: Fix the kerneldoc tag for private fields
PCI/pwrctrl: Add optional slot clock for PCI slots
|
|
- Fix a Time-of-Check to Time-of-Use issue when testing driver_managed_dma
in the IOMMU probe path (Robin Murphy)
* pci/iommu:
PCI: Fix driver_managed_dma check
|
|
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been removed
(Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the slot
is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug ports
(Lukas Wunner)
- Simplify pci_bridge_d3_possible() and clarify comments (Lukas Wunner)
* pci/hotplug:
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
|
|
- Allow 'isolated PCI functions' (multi-function devices without a function
0) for LoongArch, similar to s390 and jailhouse (Huacai Chen)
- Mask out unrelated bits in PCIE_LNKCAP_SLS2SPEED() and
PCIE_LNKCTL2_TLS2SPEED(), which makes them more robust and fixes a
WARN_ON_ONCE() in pcie_set_target_speed() (Jiwei Sun)
- Read Link Control 2 again when retraining a link after a training failure
so we try to increase the link speed (Jiwei Sun)
- Allow built-in drivers, not just modular drivers, to use async initial
probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability (Sean
Christopherson)
* pci/enumeration:
PCI: Support Immediate Readiness on devices without PM capabilities
PCI: Allow built-in drivers to use async initial probing
PCI: Adjust the position of reading the Link Control 2 register
PCI: Fix link speed calculation on retrain failure
PCI: Extend isolated function probing to LoongArch
|
|
- Change aspm_disabled and aspm_force from int to bool (Hans Zhang)
- Initialize val at declaration (Hans Zhang)
* pci/aspm:
PCI/ASPM: Consolidate variable declaration and initialization
PCI/ASPM: Use boolean type for aspm_disabled and aspm_force
|
|
Pull rdma updates from Jason Gunthorpe:
- Various minor code cleanups and fixes for hns, iser, cxgb4, hfi1,
rxe, erdma, mana_ib
- Prefetch supprot for rxe ODP
- Remove memory window support from hns as new device FW is no longer
support it
- Remove qib, it is very old and obsolete now, Cornelis wishes to
restructure the hfi1/qib shared layer
- Fix a race in destroying CQs where we can still end up with work
running because the work is cancled before the driver stops
triggering it
- Improve interaction with namespaces:
* Follow the devlink namespace for newly spawned RDMA devices
* Create iopoib net devces in the parent IB device's namespace
* Allow CAP_NET_RAW checks to pass in user namespaces
- A new flow control scheme for IB MADs to try and avoid queue
overflows in the network
- Fix 2G message sizes in bnxt_re
- Optimize mkey layout for mlx5 DMABUF
- New "DMA Handle" concept to allow controlling PCI TPH and steering
tags
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (71 commits)
RDMA/siw: Change maintainer email address
RDMA/mana_ib: add support of multiple ports
RDMA/mlx5: Refactor optional counters steering code
RDMA/mlx5: Add DMAH support for reg_user_mr/reg_user_dmabuf_mr
IB: Extend UVERBS_METHOD_REG_MR to get DMAH
RDMA/mlx5: Add DMAH object support
RDMA/core: Introduce a DMAH object and its alloc/free APIs
IB/core: Add UVERBS_METHOD_REG_MR on the MR object
net/mlx5: Add support for device steering tag
net/mlx5: Expose IFC bits for TPH
PCI/TPH: Expose pcie_tph_get_st_table_size()
RDMA/mlx5: Fix incorrect MKEY masking
RDMA/mlx5: Fix returned type from _mlx5r_umr_zap_mkey()
RDMA/mlx5: remove redundant check on err on return expression
RDMA/mana_ib: add additional port counters
RDMA/mana_ib: Fix DSCP value in modify QP
RDMA/efa: Add CQ with external memory support
RDMA/core: Add umem "is_contiguous" and "start_dma_addr" helpers
RDMA/uverbs: Add a common way to create CQ with umem
RDMA/mlx5: Optimize DMABUF mkey page size
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI update from Thomas Gleixner:
"A trivial cleanup in the PCI/MSI code to remove a duplicated back and
forth conversion"
* tag 'irq-msi-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove duplicated to_pci_dev() conversion
|
