| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI update from Thomas Gleixner:
"A trivial cleanup in the PCI/MSI code to remove a duplicated back and
forth conversion"
* tag 'irq-msi-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove duplicated to_pci_dev() conversion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Create pwrctrl devices only when we need them, i.e., when
CONFIG_PCI_PWRCTRL is enabled.
This allows brcmstb to work around a pwrctrl regression by
disabling CONFIG_PCI_PWRCTRL (Manivannan Sadhasivam)
* tag 'pci-v6.16-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Create pwrctrl devices only when CONFIG_PCI_PWRCTRL is enabled
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If devicetree describes power supplies related to a PCI device, we
unnecessarily created a pwrctrl device even if CONFIG_PCI_PWRCTL was not
enabled.
We only need pci_pwrctrl_create_device() when CONFIG_PCI_PWRCTRL is
enabled. Compile it out when CONFIG_PCI_PWRCTRL is not enabled.
When pci_pwrctrl_create_device() creates and returns a pwrctrl device,
pci_scan_device() doesn't enumerate the PCI device. It assumes the pwrctrl
core will rescan the bus after turning on the power. However, if
CONFIG_PCI_PWRCTRL is not enabled, the rescan never happens, which breaks
PCI enumeration on any system that describes power supplies in devicetree
but does not use pwrctrl.
Jim reported that some brcmstb platforms break this way. The brcmstb
driver is still broken if CONFIG_PCI_PWRCTRL is enabled, but this commit at
least allows brcmstb to work when it's NOT enabled.
Fixes: 957f40d039a9 ("PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()")
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Link: https://lore.kernel.org/r/CA+-6iNwgaByXEYD3j=-+H_PKAxXRU78svPMRHDKKci8AGXAUPg@mail.gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.15
Link: https://patch.msgid.link/20250701064731.52901-1-manivannan.sadhasivam@linaro.org
|
|
into soc/drivers
This pull request contains Broadcom SoCs drivers updates for 6.17,
please pull the following:
- Andrea adds the RP1 clock, pinctrl/pinconf/gpio and misc driver to
bind them all
* tag 'arm-soc/for-6.17/drivers' of https://github.com/Broadcom/stblinux:
pinctrl: rp1: Implement RaspberryPi RP1 pinmux/pinconf support
misc: rp1: RaspberryPi RP1 misc driver
pinctrl: rp1: Implement RaspberryPi RP1 gpio support
clk: rp1: Add support for clocks provided by RP1
dt-bindings: clock: Add RaspberryPi RP1 clock bindings
Link: https://lore.kernel.org/r/20250630190216.1518354-4-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc7).
Conflicts:
Documentation/netlink/specs/ovpn.yaml
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
af52020fc599 ("ovpn: reject unexpected netlink attributes")
drivers/net/phy/phy_device.c
a44312d58e78 ("net: phy: Don't register LEDs for genphy")
f0f2b992d818 ("net: phy: Don't register LEDs for genphy")
https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org
drivers/net/wireless/intel/iwlwifi/fw/regulatory.c
drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap")
ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware")
net/ipv6/mcast.c
ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()")
a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()")
https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
Running as nested root on MSHV imposes a different requirement
for the pci-hyperv controller.
In this setup, the interrupt will first come to the L1 (nested) hypervisor,
which will deliver it to the appropriate root CPU. Instead of issuing the
RETARGET hypercall, issue the MAP_DEVICE_INTERRUPT hypercall to L1 to
complete the setup.
Rename hv_arch_irq_unmask() to hv_irq_retarget_interrupt().
Co-developed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1752261532-7225-4-git-send-email-nunodasneves@linux.microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Track apple Root Ports explicitly and look up the driver data from
the struct device instead of using dev->driver_data, which is used by
pci_host_common_init() for the generic host bridge pointer (Marc
Zyngier)
- Set dev->driver_data before pci_host_common_init() calls
gen_pci_init() because some drivers need it to set up ECAM mappings;
this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven)
- Revert the now-unnecessary use of ECAM pci_config_window.priv to
store a copy of dev->driver_data (Marc Zyngier)
* tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device"
PCI: host-generic: Set driver_data before calling gen_pci_init()
PCI: apple: Add tracking of probed root ports
|
|
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
While doing the conversion, I noticed that hv_compose_msi_msg() is doing
more than it is supposed to (composing message). This function also
allocates and populates struct tran_int_desc, which should be done in
hv_pcie_domain_alloc() instead. It works, but it is not the correct design.
However, I have no hardware to test such change, therefore I leave a TODO
note.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
pci_msix_write_tph_tag() takes the per device MSI descriptor mutex and then
invokes msi_domain_get_virq(), which takes the same mutex again. That
obviously results in a system hang which is exposed by a softlockup or
lockdep warning.
Move the lock guard after the invocation of msi_domain_get_virq() to fix
this.
[ tglx: Massage changelog by adding a proper explanation and removing the
not really useful stacktrace ]
Fixes: d5124a9957b2 ("PCI/MSI: Provide a sane mechanism for TPH")
Reported-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jorge Lopez <jorge.jo.lopez@oracle.com>
Link: https://lore.kernel.org/all/20250708222530.1041477-1-himanshu.madhani@oracle.com
|
|
The root partition only uses VMBus when running nested.
When running on baremetal the Hyper-V PCI driver is not needed,
so do not initialize it.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/1751582677-30930-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1751582677-30930-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Fix below warning in Hyper-V PCI driver that comes when kernel is
compiled with W=1 option. Include export.h in driver files to fix it.
* warning: EXPORT_SYMBOL() is used, but #include <linux/export.h>
is missing
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250611100459.92900-6-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250611100459.92900-6-namjain@linux.microsoft.com>
|
|
IRQchip drivers need a PCI/MSI function to map a RID to a MSI
controller deviceID namespace and at the same time retrieve the
struct device_node pointer of the MSI controller the RID is mapped
to.
Add pci_msi_map_rid_ctlr_node() to achieve this purpose.
Cc Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-25-12e71f1b3528@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc5).
No conflicts.
No adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The PCI bus type does not expect its runtime PM suspend callback
function, pci_pm_runtime_suspend(), to be invoked at all during system-
wide suspend and resume, and it does not expect its runtime resume
callback function, pci_pm_runtime_resume(), to be invoked at any point
when runtime PM is disabled for the given device during system-wide
suspend and resume, so make it express that expectation by setting
power.strict_midlayer for all PCI devices in pci_pm_prepare() and
clear it in pci_pm_complete().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1925097.atdPhlSkOF@rjwysocki.net
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.17
- Add SPI FLASH, camera, and Ethernet support on the RZ/G3E SoC and/or
the RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add Ethernet, USB2, and PMIC support on the RZ/V2H and RZ/V2N SoCs
and EVK boards,
- Add timer, I2C, watchdog, and GPU support on the RZ/V2N SoC and the
RZ/V2N EVK board,
- Add debug LED support for the RZN1D-DB development board,
- Improve PCIe clock description on the Retronix Sparrow Hawk board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r9a09g047: Add GBETH nodes
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Rename fixed regulator node names
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Add RAA215300 PMIC
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add RAA215300 PMIC
arm64: dts: renesas: rcar-gen3: Add bootph-all to sysinfo EEPROMs
arm64: dts: renesas: sparrow-hawk: Describe split PCIe clock
arm64: dts: renesas: r8a779g0: Describe PCIe root ports
arm64: dts: renesas: ebisu: Add CAN0 support
ARM: dts: renesas: r9a06g032: Add second clock input to RTC
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable USB2.0 support
arm64: dts: renesas: r9a09g056: Add USB2.0 support
arm64: dts: renesas: r8a779g3-sparrow-hawk: Sort DTS
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe debug LEDs
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2.0 support
PCI/pwrctrl: Add optional slot clock for PCI slots
arm64: dts: renesas: r9a09g057: Add USB2.0 support
arm64: dts: renesas: r9a09g047e57-smarc: Enable CRU, CSI support
arm64: dts: renesas: renesas-smarc2: Enable I2C0 node
arm64: dts: renesas: r9a09g047e57-smarc: Add I2C0 pincontrol
arm64: dts: renesas: r9a09g047: Add CRU, CSI2 nodes
...
Link: https://lore.kernel.org/r/cover.1751026664.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
device"
This reverts commit 4900454b4f819e88e9c57ed93542bf9325d7e161.
Now that nobody relies of cfg->priv containing anything useful before the
.init() callback is used, restore the previous behaviour.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-4-maz@kernel.org
|
|
On MicroChip MPFS Icicle:
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie: Parsing ranges property...
microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000368
Current swapper/0 pgtable: 4K pagesize, 39-bit VAs, pgdp=0x00000000814f1000
[0000000000000368] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Oops [#1]
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.15.0-rc1-icicle-00003-gafc0a570bb61 #232 NONE
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
[...]
[<ffffffff803fb8a4>] plda_pcie_setup_iomems+0xe/0x78
[<ffffffff803fc246>] mc_platform_init+0x80/0x1d2
[<ffffffff803f9c88>] pci_ecam_create+0x104/0x1e2
[<ffffffff8000adbe>] pci_host_common_init+0x120/0x228
[<ffffffff8000af42>] pci_host_common_probe+0x7c/0x8a
The initialization of driver_data was moved after the call to
gen_pci_init(), while the pci_ecam_ops.init() callback
mc_platform_init() expects it has already been initialized.
Fix this by moving the initialization of driver_data up.
Fixes: afc0a570bb613871 ("PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/774290708a6f0f683711914fda110742c18a7fb2.1750787223.git.geert+renesas@glider.be
Link: https://patch.msgid.link/20250625111806.4153773-2-maz@kernel.org
|
|
The apple driver relies on being able to directly find the matching root
port structure from the platform device that represents this port.
A previous hack stashed a pointer to the root port structure in the config
window private pointer, but that ended up relying on assumptions that break
other drivers.
Instead, bite the bullet and track the association as part of the driver
itself as a list of probed root ports.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-3-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Fix a PTM debugfs build error with CONFIG_DEBUG_FS=n &&
CONFIG_PCIE_PTM=y (Manivannan Sadhasivam)
* tag 'pci-v6.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/PTM: Build debugfs code only if CONFIG_DEBUG_FS is enabled
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc4).
Conflicts:
Documentation/netlink/specs/mptcp_pm.yaml
9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names")
ec362192aa9e ("netlink: specs: fix up indentation errors")
https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au
Adjacent changes:
Documentation/netlink/specs/fou.yaml
791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names")
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 631b2af2f357 ("PCI/ACPI: Fix allocated memory release
on error in pci_acpi_scan_root()").
The reverted patch causes the 'ri->cfg' and 'root_ops' resources to be
released multiple times.
When acpi_pci_root_create() fails, these resources have already been
released internally by the __acpi_pci_root_release_info() function.
Releasing them again in pci_acpi_scan_root() leads to incorrect behavior
and potential memory issues.
We plan to resolve the issue using a more appropriate fix.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aEmdnuw715btq7Q5@stanley.mountain/
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250619072608.2075475-1-qiaozhe@iscas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Otherwise, the following build error will happen for CONFIG_DEBUG_FS=n &&
CONFIG_PCIE_PTM=y:
drivers/pci/pcie/ptm.c:498:25: error: redefinition of 'pcie_ptm_create_debugfs'
498 | struct pci_ptm_debugfs *pcie_ptm_create_debugfs(struct device *dev, void *pdata,
| ^
./include/linux/pci.h:1915:2: note: previous definition is here
1915 | *pcie_ptm_create_debugfs(struct device *dev, void *pdata,
| ^
drivers/pci/pcie/ptm.c:546:6: error: redefinition of 'pcie_ptm_destroy_debugfs'
546 | void pcie_ptm_destroy_debugfs(struct pci_ptm_debugfs *ptm_debugfs)
| ^
./include/linux/pci.h:1918:1: note: previous definition is here
1918 | pcie_ptm_destroy_debugfs(struct pci_ptm_debugfs *ptm_debugfs) { }
|
Fixes: 132833405e61 ("PCI: Add debugfs support for exposing PTM context")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Closes: https://lore.kernel.org/linux-pci/20250607025506.GA16607@sol
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20250608033305.15214-1-manivannan.sadhasivam@linaro.org
|
|
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In pci_msi_update_mask(), "lock = &to_pci_dev()" does the to_pci_dev()
lookup, and there's another one buried inside msi_desc_to_pci_dev().
Introduce a local variable to remove that duplication.
Signed-off-by: Chris Li <chrisl@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20250617-pci-msi-avoid-dup-pcidev-v1-1-ed75b0419023@kernel.org
|
|
Commit c3be50f7547c ("PCI: pciehp: Ignore Presence Detect Changed caused by
DPC") sought to ignore Presence Detect Changed events occurring as a side
effect of Downstream Port Containment.
The commit awaits recovery from DPC and then clears events which occurred
in the meantime. However if the first event seen after DPC is Data Link
Layer State Changed, only that event is cleared and not Presence Detect
Changed. The object of the commit is thus defeated.
That's because pciehp_ist() computes the events to clear based on the local
"events" variable instead of "ctrl->pending_events". The former contains
the events that had occurred when pciehp_ist() was entered, whereas the
latter also contains events that have accumulated while awaiting DPC
recovery.
In practice, the order of PDC and DLLSC events is arbitrary and the delay
in-between can be several milliseconds.
So change the logic to always clear PDC events, even if they come after an
initial DLLSC event.
Fixes: c3be50f7547c ("PCI: pciehp: Ignore Presence Detect Changed caused by DPC")
Reported-by: Lương Việt Hoàng <tcm4095@gmail.com>
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765#c165
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Lương Việt Hoàng <tcm4095@gmail.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Link: https://patch.msgid.link/d9c4286a16253af7e93eaf12e076e3ef3546367a.1750257164.git.lukas@wunner.de
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow dynamic MSI-X vector allocation for pci_hyperv PCI controller
by adding support for the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN and using
pci_msix_prepare_desc() to prepare the MSI-X descriptors.
Feature support added for both x86 and ARM64
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
For supporting dynamic MSI-X vector allocation by PCI controllers, enabling
the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN is not enough, msix_prepare_msi_desc()
to prepare the MSI descriptor is also needed.
Export pci_msix_prepare_desc() to allow PCI controllers to support dynamic
MSI-X vector allocation.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The RaspberryPi RP1 is a PCI multi function device containing
peripherals ranging from Ethernet to USB controller, I2C, SPI
and others.
Implement a bare minimum driver to operate the RP1, leveraging
actual OF based driver implementations for the on-board peripherals
by loading a devicetree overlay during driver probe if the RP1
node is not already present in the DT.
The peripherals are accessed by mapping MMIO registers starting
from PCI BAR1 region.
With the overlay approach we can achieve more generic and agnostic
approach to managing this chipset, being that it is a PCI endpoint
and could possibly be reused in other hw implementations. The
presented approach is also used by Bootlin's Microchip LAN966x
patchset (see link) as well, for a similar chipset.
In this case, the inclusion tree for the DT overlay is as follow
(the arrow points to the includer):
rp1-pci.dtso <---- rp1-common.dtsi
On the other hand, to ensure compatibility with downstream, this
driver can also work with a DT already comprising the RP1 node, so
the dynamically loaded overlay will not be used if the DT is already
fully defined.
The reason why this driver is contained in drivers/misc has
been paved by Bootlin's LAN966X driver, which first used the
overlay approach to implement non discoverable peripherals behind a
PCI bus. For RP1, the same arguments apply: it's not used as an SoC
since the driver code is not running on-chip and is not like an MFD
since it does not really need all the MFD infrastructure (shared regs,
etc.). So, for this particular use, misc has been proposed and deemed
as a good choice. For further details about that please check the links.
This driver is heavily based on downstream code from RaspberryPi
Foundation, and the original author is Phil Elwell.
Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf
Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/
Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/
Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/
Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # quirks.c, pci_ids.h
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250529135052.28398-7-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Add the ability to enable optional slot clock into the pwrctrl driver.
This is used to enable slot clock in split-clock topologies, where the PCIe
host/controller supply and PCIe slot supply are not provided by the same
clock. The PCIe host/controller clock should be described in the controller
node as the controller clock, while the slot clock should be described in
controller bridge/slot subnode.
Example DT snippet:
&pcicontroller {
clocks = <&clk_dif 0>; /* PCIe controller clock */
pci@0,0 {
#address-cells = <3>;
#size-cells = <2>;
reg = <0x0 0x0 0x0 0x0 0x0>;
compatible = "pciclass,0604";
device_type = "pci";
clocks = <&clk_dif 1>; /* PCIe slot clock */
vpcie3v3-supply = <®_3p3v>;
ranges;
};
};
Example clock topology:
____________ ____________
| PCIe host | | PCIe slot |
| | | |
| PCIe RX<|==================|>PCIe TX |
| PCIe TX<|==================|>PCIe RX |
| | | |
| PCIe CLK<|======.. ..======|>PCIe CLK |
'------------' || || '------------'
|| ||
____________ || ||
| 9FGV0441 | || ||
| | || ||
| CLK DIF0<|======'' ||
| CLK DIF1<|==========''
| CLK DIF2<|
| CLK DIF3<|
'------------'
Immutable commit for Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
intended to put PCI devices into D0, but in doing so unintentionally
changed runtime PM initialization not to occur on devices that don't
support PCI PM. This caused a regression in vfio-pci due to an imbalance
with its use.
Adjust the logic in pci_pm_init() so that even if PCI PM isn't supported
runtime PM is still initialized.
Fixes: 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m7e8929d6421690dc8bd6dc639d86c2b4db27cbc4
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m40d277dcdb9be64a1609a82412d1aa906263e201
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Link: https://patch.msgid.link/20250611233117.61810-1-superm1@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
|
|
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar files
(Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU
to simplify build testing and avoid inadvertent build regressions (Arnd
Bergmann)
- Update driver path in PCI NVMe function documentation (Rick Wertenbroek)
- Remove unused pci_printk() (Ilpo Järvinen)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
- Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof
Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan
Sadhasivam)
* pci/misc:
MAINTAINERS: Update Manivannan Sadhasivam email address
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
Documentation: Fix path for NVMe PCI endpoint target driver
PCI: Add CONFIG_MMU dependency
x86/PCI: Drop 'pci' suffix from intel_mid_pci.c
|
|
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
* pci/ptm-debugfs:
PCI: qcom-ep: Mask PTM_UPDATING interrupt
PCI: dwc: Add debugfs support for PTM context
PCI: dwc: Pass DWC PCIe mode to dwc_pcie_debugfs_init()
PCI: Add debugfs support for exposing PTM context
|
