| Age | Commit message (Collapse) | Author |
|---|
|
- Make several tegra symbols const (Rikard Falkeborn)
- Fix tegra Kconfig host/endpoint typo (Wesley Sheng)
- Fix runtime PM imbalance (Dinghao Liu)
* remotes/lorenzo/pci/tegra:
PCI: tegra: Fix runtime PM imbalance in pex_ep_event_pex_rst_deassert()
PCI: tegra: Fix typo for PCIe endpoint mode in Tegra194
PCI: tegra: Constify static structs
|
|
- sifive: Add pcie_aux clock to prci driver (Greentime Hu)
- sifive: Use reset-simple in prci driver for PCIe (Greentime Hu)
- Add SiFive FU740 PCIe host controller driver and DT binding (Paul
Walmsley, Greentime Hu)
* remotes/lorenzo/pci/risc-v:
riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC
PCI: fu740: Add SiFive FU740 PCIe host controller driver
dt-bindings: PCI: Add SiFive FU740 PCIe host controller
MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver
clk: sifive: Use reset-simple in prci driver for PCIe driver
clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
|
|
- Make several microchip symbols static (Wei Yongjun)
- Drop redundant dev_err() for platform_get_irq() errors (Krzysztof
Wilczyński)
* remotes/lorenzo/pci/microchip:
PCI: microchip: Remove dev_err() when handing an error from platform_get_irq()
PCI: microchip: Make some symbols static
|
|
- Configure FC and FTS for functions other than 0 (Ryder Lee)
- Add missing MODULE_DEVICE_TABLE (Qiheng Lin)
- Add YAML schema for MediaTek (Jianjun Wang)
- Export pci_pio_to_address() for module use (Jianjun Wang)
- Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)
- Add MediaTek MT8192 INTx support (Jianjun Wang)
- Add MediaTek MT8192 MSI support (Jianjun Wang)
- Add MediaTek MT8192 system power management support (Jianjun Wang)
* remotes/lorenzo/pci/mediatek:
MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
PCI: mediatek-gen3: Add system PM support
PCI: mediatek-gen3: Add MSI support
PCI: mediatek-gen3: Add INTx support
PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192
PCI: Export pci_pio_to_address() for module use
dt-bindings: PCI: mediatek-gen3: Add YAML schema
PCI: mediatek: Add missing MODULE_DEVICE_TABLE
PCI: mediatek: Configure FC and FTS for functions other than 0
|
|
- Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof
Wilczyński)
* remotes/lorenzo/pci/layerscape:
PCI: layerscape: Correct syntax by changing comma to semicolon
|
|
- Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
|
|
- Fix NULL pointer dereference when epc_features not implemented (Shradha
Todi)
- Remove redundant initialization (Colin Ian King)
- Add missing destroy_workqueue() in endpoint test (Yang Yingliang)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: Fix missing destroy_workqueue()
PCI: endpoint: Remove redundant initialization of pointer dev
PCI: endpoint: Fix NULL pointer dereference for ->get_features()
|
|
- Use generic config accessors for TI AM65x (K3) to fix regression (Kishon
Vijay Abraham I)
- Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized
along with the RC in resume (Jisheng Zhang)
- Remove unused pcie_app_rd() (Jiapeng Chong)
- Move iATU detection earlier to fix regression (Hou Zhiqiang)
* remotes/lorenzo/pci/dwc:
PCI: dwc: Move iATU detection earlier
PCI: dwc/intel-gw: Remove unused function
PCI: dwc: Move dw_pcie_msi_init() to dw_pcie_setup_rc()
PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
|
|
- Add DT binding and TI j721e support for refclk to PCIe connector (Kishon
Vijay Abraham I)
- Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay
Abraham I)
* remotes/lorenzo/pci/cadence:
PCI: j721e: Add support to provide refclk to PCIe connector
dt-bindings: PCI: ti,j721e: Add endpoint mode dt-bindings for TI's AM64 SoC
dt-bindings: PCI: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC
dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector
|
|
- Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun)
* remotes/lorenzo/pci/brcmstb:
PCI: brcmstb: Fix error return code in brcm_pcie_probe()
|
|
- Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui)
* remotes/lorenzo/pci/altera-msi:
PCI: altera-msi: Remove redundant dev_err call in altera_msi_probe()
|
|
- Fix compile testing of al driver without CONFIG_PCI_ECAM (Arnd Bergmann)
- Fix compile testing of thunder drivers (Arnd Bergmann)
- Fix "no symbols" warnings when compile testing al, thunder driver with
CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)
- Remove unused MicroGate SyncLink device IDs (Jiri Slaby)
- Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński)
* pci/misc:
x86/PCI: Remove unused alloc_pci_root_info() return value
PCI: Remove MicroGate SyncLink device IDs
PCI: Avoid building empty drivers
PCI: thunder: Fix compile testing
PCI: al: Select CONFIG_PCI_ECAM
|
|
- Increase delay after FLR to work around Intel DC P4510 NVMe erratum
(Raphael Norwitz)
* pci/virtualization:
PCI: Delay after FLR of Intel DC P4510 NVMe
|
|
- Fix kernel-doc warnings (Krzysztof Wilczyński)
* pci/kernel-doc:
PCI: Fix kernel-doc errors
|
|
- Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to
static attributes to fix races in device enumeration (Krzysztof
Wilczyński)
- Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof
Wilczyński)
- Use sysfs_emit() in "show" functions (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PCI/sysfs: Rearrange smbios_attr_group and acpi_attr_group
PCI/sysfs: Tidy SMBIOS & ACPI label attributes
PCI/sysfs: Convert "index", "acpi_index", "label" to static attributes
PCI/sysfs: Define SMBIOS label attributes with DEVICE_ATTR*()
PCI/sysfs: Define ACPI label attributes with DEVICE_ATTR*()
PCI/sysfs: Rename device_has_dsm() to device_has_acpi_name()
PCI/sysfs: Convert "vpd" to static attribute
PCI/sysfs: Rename "vpd" attribute accessors
PCI/sysfs: Convert "reset" to static attribute
PCI/sysfs: Convert "rom" to static attribute
PCI/sysfs: Convert "config" to static attribute
|
|
- Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit)
- Remove sysfs VPD size checking dead code (Heiner Kallweit)
- Convert VPF sysfs file to static attribute (Heiner Kallweit)
- Remove unnecessary pci_set_vpd_size() (Heiner Kallweit)
- Tone down "missing VPD" message (Heiner Kallweit)
* pci/vpd:
PCI: Allow VPD access for QLogic ISP2722
PCI/VPD: Add helper pci_get_func0_dev()
PCI/VPD: Remove pci_vpd_find_tag() SRDT handling
PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument
PCI/VPD: Change pci_vpd_init() return type to void
PCI/VPD: Make missing VPD message less alarming
PCI/VPD: Remove pci_set_vpd_size()
PCI/VPD: Remove sysfs accessor size checking dead code
PCI/VPD: Remove obsolete Broadcom NIC quirk
|
|
- Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki)
* pci/pm:
PCI/ACPI: Fix acpi_pci_set_power_state() debug message
|
|
- Fix acpiphp reference count leak (Feilong Lin)
* pci/hotplug:
PCI: acpiphp: Fix whitespace issue
PCI: shpchp: Remove unused shpc_writeb()
PCI: cpqphp: Use DEFINE_SPINLOCK() for int15_lock
ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
|
|
- Fix RCiEP device to RCEC association (Qiuxu Zhuo)
* pci/error:
PCI/RCEC: Fix RCiEP device to RCEC association
|
|
Add driver for the SiFive FU740 PCIe host controller.
This controller is based on the DesignWare PCIe core.
Co-developed-by: Henry Styles <hes@sifive.com>
Co-developed-by: Erik Danie <erik.danie@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Link: https://lore.kernel.org/r/20210504105940.100004-6-greentime.hu@sifive.com
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Henry Styles <hes@sifive.com>
Signed-off-by: Erik Danie <erik.danie@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
The Broadcom STB PCIe RC uses a reset control "rescal" for certain chips.
The "rescal" implements a "pulse reset" so using assert/deassert is wrong
for this device. Instead, we use reset/rearm. We need to use rearm so
that we can reset it after a suspend/resume cycle; w/o using "rearm", the
"rescal" device will only ever fire once.
Of course for suspend/resume to work we also need to put the reset/rearm
calls in the suspend and resume routines.
Fixes: 740d6c3708a9 ("PCI: brcmstb: Add control of rescal reset")
Link: https://lore.kernel.org/r/20210430152156.21162-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722") disabled access
to VPD of the ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter because
reading past the end of the VPD caused NMIs.
104daa71b396 ("PCI: Determine actual VPD size on first access") limits
reads to the actual size of VPD, which should prevent these NMIs.
104daa71b396 was merged *before* 0d5370d1d852, but we think the testing
that prompted 0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722")
was done with a kernel that lacked 104daa71b396. See [1, 2].
Remove the quirk added by 0d5370d1d852 ("PCI: Prevent VPD access for QLogic
ISP2722") so customers can read the HBA VPD.
[1] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2012161641230.28924@irv1user01.caveonetworks.com/
[2] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2104071535110.13940@irv1user01.caveonetworks.com/
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210409215153.16569-2-aeasi@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.6+
|
|
Factor out the "get function 0" logic into pci_get_func0_dev().
[bhelgaas: keep PCI_DEVFN(PCI_SLOT()) instead of exposing implementation
details, commit log]
Link: https://lore.kernel.org/r/75d1f619-8a35-690d-8fc8-e851264a4bbb@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Only SRDT tag is the end tag, and no caller is interested in it. This
allows to remove all SRDT tag handling.
Link: https://lore.kernel.org/r/3f63f06f-734f-8fff-9518-27fe1faf903d@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
All callers pass 0 as offset. Therefore remove the parameter and use a
fixed offset 0 in pci_vpd_find_tag().
Link: https://lore.kernel.org/r/f62e6e19-5423-2ead-b2bd-62844b23ef8f@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_init_capabilities() is the only caller and doesn't use the return
value. So let's change the return type to void.
Link: https://lore.kernel.org/r/663ec440-8375-1459-ddb4-98ea76e75917@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Realtek RTL8169/8168/8125 NIC families indicate VPD capability and an
optional VPD EEPROM can be connected via I2C/SPI. However I haven't seen
any card or system with such a VPD EEPROM yet. The missing EEPROM causes
the following warning whenever e.g. lscpi -vv is executed.
invalid short VPD tag 00 at offset 01
The warning confuses users, and I think we should handle the situation more
gently. Therefore, if first VPD byte is read as 0x00, assume a missing
optional VPD PROM and replace the warning with a more descriptive message
at info level.
[bhelgaas: fix pre-existing whitespace]
Link: https://lore.kernel.org/r/ccbc11f1-4dbb-e2c8-d0ea-559e06d4c340@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
24a1720a0841 ("cxgb4: collect serial config version from register") removed
the only usage of pci_set_vpd_size(). If a device needs to override the
auto-detected VPD size, then this can be done with a PCI quirk, as is done
for Chelsio devices. There's no need to allow drivers to change the VPD
size.
Remove pci_set_vpd_size().
[bhelgaas: squash in Arnd's fix for "'pci_vpd_set_size' defined but not
used" from
https://lore.kernel.org/r/20210421140334.3847155-1-arnd@kernel.org]
Link: https://lore.kernel.org/r/47d86e52-9bcf-7da7-1edb-0d988a7a82ab@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
|
This is a shim around vunmap_range, get rid of it.
Move the main API comment from the _noflush variant to the normal
variant, and make _noflush internal to mm/.
[npiggin@gmail.com: fix nommu builds and a comment bug per sfr]
Link: https://lkml.kernel.org/r/1617292598.m6g0knx24s.astroid@bobo.none
[akpm@linux-foundation.org: move vunmap_range_noflush() stub inside !CONFIG_MMU, not !CONFIG_NUMA]
[npiggin@gmail.com: fix nommu builds]
Link: https://lkml.kernel.org/r/1617292497.o1uhq5ipxp.astroid@bobo.none
Link: https://lkml.kernel.org/r/20210322021806.892164-5-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With zpci_configure_device() now always called on a device that has
already been configured on the platform level its name has become
misleading. Rename it to zpci_scan_configured_device() to signify that
the function now only handles the correct scanning of a newly configured
PCI function taking care of the special handling necessary for function
0 and functions parked waiting for a PCI bus that can't be created
without first seeing function 0.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
Add suspend_noirq and resume_noirq callback functions to implement PM
system suspend and resume hooks for the MediaTek Gen3 PCIe controller.
When the system suspends, trigger the PCIe link to enter the L2 state
and pull down the PERST# pin, gating the clocks of the MAC layer, and
then power-off the physical layer to provide power-saving.
When the system resumes, the PCIe link should be re-established and the
related control register values should be restored.
Link: https://lore.kernel.org/r/20210420061723.989-7-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
Add MSI support for MediaTek Gen3 PCIe controller.
This PCIe controller supports up to 256 MSI vectors, the MSI hardware
block diagram is as follows:
+-----+
| GIC |
+-----+
^
|
port->irq
|
+-+-+-+-+-+-+-+-+
|0|1|2|3|4|5|6|7| (PCIe intc)
+-+-+-+-+-+-+-+-+
^ ^ ^
| | ... |
+-------+ +------+ +-----------+
| | |
+-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
|0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets)
+-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| | | | | | | | | | | | (MSI vectors)
| | | | | | | | | | | |
(MSI SET0) (MSI SET1) ... (MSI SET7)
With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
each set has its own address for MSI message, and supports 32 MSI vectors
to generate interrupt.
Link: https://lore.kernel.org/r/20210420061723.989-6-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
Add INTx support for MediaTek Gen3 PCIe controller.
Link: https://lore.kernel.org/r/20210420061723.989-5-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
MediaTek's PCIe host controller has three generation HWs, the new
generation HW is an individual bridge, it supports Gen3 speed and
compatible with Gen2, Gen1 speed.
Add support for new Gen3 controller which can be found on MT8192.
Link: https://lore.kernel.org/r/20210420061723.989-4-jianjun.wang@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
|
|
dw_pcie_ep_init() depends on the detected iATU region numbers to allocate
the in/outbound window management bitmap. It fails after 281f1f99cf3a
("PCI: dwc: Detect number of iATU windows").
Move the iATU region detection into a new function, move the detection to
the very beginning of dw_pcie_host_init() and dw_pcie_ep_init(). Also
remove it from the dw_pcie_setup(), since it's more like a software
initialization step than hardware setup.
Link: https://lore.kernel.org/r/20210125044803.4310-1-Zhiqiang.Hou@nxp.com
Link: https://lore.kernel.org/linux-pci/20210407131255.702054-1-dmitry.baryshkov@linaro.org
Link: https://lore.kernel.org/r/20210413142219.2301430-1-dmitry.baryshkov@linaro.org
Fixes: 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows")
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[DB: moved dw_pcie_iatu_detect to happen after host_init callback]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: stable@vger.kernel.org # v5.11+
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Fix the following clang warning:
drivers/pci/controller/dwc/pcie-intel-gw.c:84:19: warning: unused
function 'pcie_app_rd' [-Wunused-function].
Link: https://lore.kernel.org/r/1618475577-99198-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
|
If the host which makes use of IP's integrated MSI Receiver losts
power during suspend, we need to reinit the RC and MSI Receiver in
resume. But after we move dw_pcie_msi_init() into the core, we have no
API to do so. Usually the dwc users need to call dw_pcie_setup_rc() to
reinit the RC, we can solve this problem by moving dw_pcie_msi_init()
to dw_pcie_setup_rc().
Link: https://lore.kernel.org/r/20210325152604.6e79deba@xhacker.debian
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
The sysfs_emit() and sysfs_emit_at() functions were introduced to make it
less ambiguous which function is preferred when writing to the output
buffer in a device attribute's "show" callback [1].
Convert the PCI sysfs object "show" functions from sprintf(), snprintf()
and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the
latter is aware of the PAGE_SIZE buffer and correctly returns the number of
bytes written into the buffer.
No functional change intended.
[1] Documentation/filesystems/sysfs.rst
[bhelgaas: drop dsm_label_utf16s_to_utf8s(), link speed/width changes]
Link: https://lore.kernel.org/r/20210416205856.3234481-10-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Collect the smbios_attr_group and acpi_attr_group together in the logical
order. No functional change intended.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Update coding style to reduce distraction. No functional change intended.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The "label", "index", and "acpi_index" sysfs attributes show firmware label
information about the device. If the ACPI Device Name _DSM is implemented
for the device, we have:
label Device name (optional, may be null)
acpi_index Instance number (unique under \_SB scope)
When there is no ACPI _DSM and SMBIOS provides an Onboard Devices structure
for the device, we have:
label Reference Designation, e.g., a silkscreen label
index Device Type Instance
Previously these attributes were dynamically created either by
pci_bus_add_device() or the pci_sysfs_init() initcall, but since they don't
need to be created or removed dynamically, we can use a static attribute so
the device model takes care of addition and removal automatically.
Convert "label", "index", and "acpi_index" to static attributes.
Presence of the ACPI _DSM (device_has_acpi_name()) determines whether the
ACPI information (label, acpi_index) or the SMBIOS information (label,
index) is visible.
[bhelgaas: commit log, split to separate patch, add "pci_dev_" prefix]
Suggested-by: Oliver O'Halloran <oohall@gmail.com>
Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Use DEVICE_ATTR*() to simplify definition of the SMBIOS label attributes.
No functional change intended.
Note that dev_attr_smbios_label requires __ATTR() because the "label"
attribute can be exposed via either ACPI or SMBIOS, and we already have the
ACPI label_show() function in this file.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Use DEVICE_ATTR*() to simplify definitions of the ACPI label attributes.
No functional change intended.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Rename device_has_dsm() to device_has_acpi_name() to better reflect its
purpose and move it earlier so it's available for a future SMBIOS
.is_visible() function. No functional change intended.
[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The "vpd" sysfs attribute allows access to Vital Product Data (VPD).
Previously it was dynamically created either by pci_bus_add_device() or the
pci_sysfs_init() initcall, but since it doesn't need to be created or
removed dynamically, we can use a static attribute so the device model
takes care of addition and removal automatically.
Convert "vpd" to a static attribute and use the .is_bin_visible() callback
to check whether the device supports VPD.
Remove pcie_vpd_create_sysfs_dev_files(),
pcie_vpd_remove_sysfs_dev_files(), pci_create_capabilities_sysfs(), and
pci_create_capabilities_sysfs(), which are no longer needed.
[bhelgaas: This is substantially the same as the earlier patch from Heiner
Kallweit <hkallweit1@gmail.com>. I included Krzysztof's change here so all
the "convert to static attribute" changes are together.]
[bhelgaas: rename to vpd_read()/vpd_write() and pci_dev_vpd_attr_group]
Suggested-by: Oliver O'Halloran <oohall@gmail.com>
Based-on: https://lore.kernel.org/r/7703024f-8882-9eec-a122-599871728a89@gmail.com
Based-on-patch-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20210416205856.3234481-5-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Rename "vpd" attribute accessors so they fit with the BIN_ATTR_RW() macro
usage. Currently there is no BIN_ATTR_ADMIN_RW() that uses 0600
permissions, but if there were, it would likely use "vpd_read()" and
"vpd_write()". No functional change intended.
Extracted from the patch mentioned below by Heiner Kallweit
<hkallweit1@gmail.com>.
Link: https://lore.kernel.org/linux-pci/7703024f-8882-9eec-a122-599871728a89@gmail.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- fix buffer size for in-kernel disassembler for ebpf programs.
- fix two memory leaks in zcrypt driver.
- expose PCI device UID as index, including an indicator if the uid is
unique.
- remove some oprofile leftovers.
- improve stack unwinder tests.
- don't use gcc atomic builtins anymore, just like all other
architectures. Even though I'm sure the current code is ok, I totally
dislike that s390 is the only architecture being special here;
especially considering that there was a lengthly discussion about
this topic and the outcome was not to use the builtins. Therefore
open-code atomic ops again with inline assembly and switch to gcc
builtins as soon as other architectures are doing.
- couple of other changes to atomic and cmpxchg, and use
atomic-instrumented.h for KASAN.
- separate zbus creation, registration, and scanning in our PCI code
which allows for cleaner and easier handling.
- a rather large change to the vfio-ap code to fix circular locking
dependencies when updating crypto masks.
- move QAOB handling from qdio layer down to drivers.
- add CRW inject facility to common I/O layer. This adds debugs files
which allow to generate artificial events from user space for testing
purposes.
- increase SCLP console line length from 80 to 320 characters to avoid
odd wrapped lines.
- add protected virtualization guest and host indication files, which
indicate either that a guest is running in pv mode or if the
hypervisor is capable of starting pv guests.
- various other small fixes and improvements all over the place.
* tag 's390-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
s390/disassembler: increase ebpf disasm buffer size
s390/archrandom: add parameter check for s390_arch_random_generate
s390/zcrypt: fix zcard and zqueue hot-unplug memleak
s390/pci: expose a PCI device's UID as its index
s390/atomic,cmpxchg: always inline __xchg/__cmpxchg
s390/smp: fix do_restart() prototype
s390: get rid of oprofile leftovers
s390/atomic,cmpxchg: make constraints work with old compilers
s390/test_unwind: print test suite start/end info
s390/cmpxchg: use unsigned long values instead of void pointers
s390/test_unwind: add WARN if tests failed
s390/test_unwind: unify error handling paths
s390: update defconfigs
s390/spinlock: use R constraint in inline assembly
s390/atomic,cmpxchg: switch to use atomic-instrumented.h
s390/cmpxchg: get rid of gcc atomic builtins
s390/atomic: get rid of gcc atomic builtins
s390/atomic: use proper constraints
s390/atomic: move remaining inline assemblies to atomic_ops.h
s390/bitops: make bitops only work on longs
...
|
|
The "reset" sysfs attribute allows for resetting a PCI function.
Previously it was dynamically created either by pci_bus_add_device() or
the pci_sysfs_init() initcall, but since it doesn't need to be created or
removed dynamically, we can use a static attribute so the device model
takes care of addition and removal automatically.
Convert "reset" to a static attribute and use the .is_visible() callback to
check whether the device supports reset.
Clear reset_fn in pci_stop_dev() instead of pci_remove_capabilities_sysfs()
since we no longer explicitly remove the "reset" sysfs file.
[bhelgaas: commit log]
Suggested-by: Oliver O'Halloran <oohall@gmail.com>
Link: https://lore.kernel.org/r/20210416205856.3234481-4-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The "rom" sysfs attribute allows access to the PCI Option ROM. Previously
it was dynamically created either by pci_bus_add_device() or the
pci_sysfs_init() initcall, but since it doesn't need to be created or
removed dynamically, we can use a static attribute so the device model
takes care of addition and removal automatically.
Convert "rom" to a static attribute and use the .is_bin_visible() callback
to set the correct object size based on the ROM size.
Remove "rom_attr" from the struct pci_dev since it is no longer needed.
This attribute was added in the pre-git era by https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/drivers/pci/pci-sysfs.c?id=f6d553444da2
[bhelgaas: commit log]
Suggested-by: Oliver O'Halloran <oohall@gmail.com>
Link: https://lore.kernel.org/r/20210416205856.3234481-3-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
