summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2021-10-29PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridgePali Rohár
Aardvark supports PCIe Hot Reset via PCIE_CORE_CTRL1_REG. Use it for implementing PCI_BRIDGE_CTL_BUS_RESET bit of PCI_BRIDGE_CONTROL register on emulated bridge. With this, the function pci_reset_secondary_bus() starts working and can reset connected PCIe card. Custom userspace script [1] which uses setpci can trigger PCIe Hot Reset and reset the card manually. [1] https://alexforencich.com/wiki/en/pcie/hot-reset-linux Link: https://lore.kernel.org/r/20211028185659.20329-7-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: aardvark: Set PCI Bridge Class Code to PCI BridgePali Rohár
Aardvark controller has something like config space of a Root Port available at offset 0x0 of internal registers - these registers are used for implementation of the emulated bridge. The default value of Class Code of this bridge corresponds to a RAID Mass storage controller, though. (This is probably intended for when the controller is used as Endpoint.) Change the Class Code to correspond to a PCI Bridge. Add comment explaining this change. Link: https://lore.kernel.org/r/20211028185659.20329-6-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridgePali Rohár
From very vague, ambiguous and incomplete information from Marvell we deduced that the 32-bit Aardvark register at address 0x4 (PCIE_CORE_CMD_STATUS_REG), which is not documented for Root Complex mode in the Functional Specification (only for Endpoint mode), controls two 16-bit PCIe registers: Command Register and Status Registers of PCIe Root Port. This means that bit 2 controls bus mastering and forwarding of memory and I/O requests in the upstream direction. According to PCI specifications bits [0:2] of Command Register, this should be by default disabled on reset. So explicitly disable these bits at early setup of the Aardvark driver. Remove code which unconditionally enables all 3 bits and let kernel code (via pci_set_master() function) to handle bus mastering of Root PCIe Bridge via emulated PCI_COMMAND on emulated bridge. Link: https://lore.kernel.org/r/20211028185659.20329-5-kabel@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # b2a56469d550 ("PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access")
2021-10-29PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REGMarek Behún
The PCIE_MSI_PAYLOAD_REG contains 16-bit MSI number, not only lower 8 bits. Fix reading content of this register and add a comment describing the access to this register. Link: https://lore.kernel.org/r/20211028185659.20329-4-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: aardvark: Fix return value of MSI domain .alloc() methodMarek Behún
MSI domain callback .alloc() (implemented by advk_msi_irq_domain_alloc() function) should return zero on success, since non-zero value indicates failure. When the driver was converted to generic MSI API in commit f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support"), it was converted so that it returns hwirq number. Fix this. Link: https://lore.kernel.org/r/20211028185659.20329-3-kabel@kernel.org Fixes: f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org
2021-10-29PCI: pci-bridge-emul: Fix emulation of W1C bitsMarek Behún
The pci_bridge_emul_conf_write() function correctly clears W1C bits in cfgspace cache, but it does not inform the underlying implementation about the clear request: the .write_op() method is given the value with these bits cleared. This is wrong if the .write_op() needs to know which bits were requested to be cleared. Fix the value to be passed into the .write_op() method to have requested W1C bits set, so that it can clear them. Both pci-bridge-emul users (mvebu and aardvark) are compatible with this change. Link: https://lore.kernel.org/r/20211028185659.20329-2-kabel@kernel.org Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Russell King <rmk+kernel@armlinux.org.uk>
2021-10-27PCI: Prefer 'unsigned int' over bare 'unsigned'Krzysztof Wilczyński
The bare "unsigned" type implicitly means "unsigned int", but the preferred coding style is to use the complete type name. Update the bare use of "unsigned" to the preferred "unsigned int". No change to functionality intended. See a1ce18e4f941 ("checkpatch: warn on bare unsigned or signed declarations without int"). Link: https://lore.kernel.org/r/20211013014136.1117543-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-26PCI: Remove redundant 'rc' initializationColin Ian King
The variable 'rc' is being initialized with a value that is never read. Remove the redundant assignment. Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210910161417.91001-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-10-25PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size()Heiner Kallweit
Use new function pci_read_vpd_any() to simplify the code. [bhelgaas: squash in fix for stack overflow reported & tested by Qian [1] and Kunihiko [2]: [1] https://lore.kernel.org/netdev/e89087c5-c495-c5ca-feb1-54cf3a8775c5@quicinc.com/ [2] https://lore.kernel.org/r/2f7e3770-ab47-42b5-719c-f7c661c07d28@socionext.com Link: https://lore.kernel.org/r/6211be8a-5d10-8f3a-6d33-af695dc35caf@gmail.com Reported-by: Qian Cai <quic_qiancai@quicinc.com> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Reported-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> ] Link: https://lore.kernel.org/r/049fa71c-c7af-9c69-51c0-05c1bc2bf660@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21PCI: mt7621: Add MediaTek MT7621 PCIe host controller driverSergio Paracuellos
Add driver for the PCIe controller of the MT7621 SoC. [bhelgaas: rename from pci-mt7621.c to pcie-mt7621.c; also rename Kconfig symbol from PCI_MT7621 to PCIE_MT7621] Link: https://lore.kernel.org/r/20210922050035.18162-3-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-21PCI: PM: Fix ordering of operations in pci_back_from_sleep()Rafael J. Wysocki
The ordering of operations in pci_back_from_sleep() is incorrect, because the device may be in D3cold when it runs and pci_enable_wake() needs to access the device's configuration space which cannot be done in D3cold. Fix this by calling pci_set_power_state() to put the device into D0 before calling pci_enable_wake() for it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-19PCI: Re-enable Downstream Port LTR after reset or hotplugMingchuang Qiao
Per PCIe r5.0, sec 7.5.3.16, Downstream Ports must disable LTR if the link goes down (the Port goes DL_Down status). This is a problem because the Downstream Port's dev->ltr_path is still set, so we think LTR is still enabled, and we enable LTR in the Endpoint. When it sends LTR messages, they cause Unsupported Request errors at the Downstream Port. This happens in the reset path, where we may enable LTR in pci_restore_pcie_state() even though the Downstream Port disabled LTR because the reset caused a link down event. It also happens in the hot-remove and hot-add path, where we may enable LTR in pci_configure_ltr() even though the Downstream Port disabled LTR when the hot-remove took the link down. In these two scenarios, check the upstream bridge and restore its LTR enable if appropriate. The Unsupported Request may be logged by AER as follows: pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: id=00e8 pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=00e8(Requester ID) pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00100000/00010000 pcieport 0000:00:1d.0: [20] Unsupported Request (First) In addition, if LTR is not configured correctly, the link cannot enter the L1.2 state, which prevents some machines from entering the S0ix low power state. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20211012075614.54576-1-mingchuang.qiao@mediatek.com Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com> Signed-off-by: Mingchuang Qiao <mingchuang.qiao@mediatek.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-10-18PCI/sysfs: Explicitly show first MSI IRQ for 'irq'Barry Song
The sysfs "irq" file contains the legacy INTx IRQ. Or, if the device has MSI enabled, it contains the first MSI IRQ instead. Previously this file showed the pci_dev.irq value directly. But we'd prefer to use pci_dev.irq only for the INTx IRQ and decouple that from any MSI or MSI-X IRQs. If the device has MSI enabled, explicitly look up and show the first MSI IRQ in the sysfs "irq" file. Otherwise, show the INTx IRQ. This removes the requirement that msi_capability_init() set pci_dev.irq to the first MSI IRQ when enabling MSI and pci_msi_shutdown() restore the INTx IRQ when disabling MSI. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20210825102636.52757-3-21cnbao@gmail.com Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-18PCI: Remove struct pci_dev->driverUwe Kleine-König
There are no remaining uses of the struct pci_dev->driver pointer, so remove it. Link: https://lore.kernel.org/r/20211004125935.2300113-12-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-18PCI: Use to_pci_driver() instead of pci_dev->driverUwe Kleine-König
Struct pci_driver contains a struct device_driver, so for PCI devices, it's easy to convert a device_driver * to a pci_driver * with to_pci_driver(). The device_driver * is in struct device, so we don't need to also keep track of the pci_driver * in struct pci_dev. Replace pci_dev->driver with to_pci_driver(). This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-18Merge 5.15-rc6 into driver-core-nextGreg Kroah-Hartman
We need the driver-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18Merge 5.15-rc6 into staging-nextGreg Kroah-Hartman
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-16Merge tag 'pci-v5.15-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so we don't dereference the error code as a pointer (Wang Hai) * tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Handle msi_populate_sysfs() errors correctly
2021-10-16PCI/ERR: Reduce compile time for CONFIG_PCIEAER=nLukas Wunner
The sole non-static function in err.c, pcie_do_recovery(), is only called from: * aer.c (if CONFIG_PCIEAER=y) * dpc.c (if CONFIG_PCIE_DPC=y, which depends on CONFIG_PCIEAER) * edr.c (if CONFIG_PCIE_EDR=y, which depends on CONFIG_PCIE_DPC) Thus, err.c need not be compiled if CONFIG_PCIEAER=n. Also, pci_uevent_ers() and pcie_clear_device_status(), which are called from err.c, can be #ifdef'ed away unless CONFIG_PCIEAER=y. Since x86_64_defconfig doesn't enable CONFIG_PCIEAER, this change may slightly reduce compile time for anyone doing a test build with that config. Link: https://lore.kernel.org/r/98f9041151268c1c035ab64cca320ad86803f64a.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-15PCI/portdrv: Remove unused pcie_port_bus_{,un}register() declarationsLukas Wunner
Commit c6c889d932bb ("PCI/portdrv: Remove pcie_port_bus_type link order dependency") removed pcie_port_bus_{,un}register() but erroneously retained their declarations in portdrv.h. Remove them as well. Link: https://lore.kernel.org/r/7fd76b0591c37287ab94d911d8fd9ab9a2afcd16.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-15PCI/portdrv: Remove unused resume err_handlerLukas Wunner
Commit 3e41a317ae45 ("PCI/AER: Remove unused aer_error_resume()") removed the resume err_handler from AER. Since no other port service implements the callback, support for it can be removed from portdrv. It can be revived later if need be, preferably by re-using the pcie_port_device_iter() iterator. Link: https://lore.kernel.org/r/25334149b604e005058aeb0fdf51e01f991d5d74.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Keith Busch <kbusch@kernel.org>
2021-10-15PCI: pciehp: Ignore Link Down/Up caused by error-induced Hot ResetLukas Wunner
Stuart Hayes reports that an error handled by DPC at a Root Port results in pciehp gratuitously bringing down a subordinate hotplug port: RP -- UP -- DP -- UP -- DP (hotplug) -- EP pciehp brings the slot down because the Link to the Endpoint goes down. That is caused by a Hot Reset being propagated as a result of DPC. Per PCIe Base Spec 5.0, section 6.6.1 "Conventional Reset": For a Switch, the following must cause a hot reset to be sent on all Downstream Ports: [...] * The Data Link Layer of the Upstream Port reporting DL_Down status. In Switches that support Link speeds greater than 5.0 GT/s, the Upstream Port must direct the LTSSM of each Downstream Port to the Hot Reset state, but not hold the LTSSMs in that state. This permits each Downstream Port to begin Link training immediately after its hot reset completes. This behavior is recommended for all Switches. * Receiving a hot reset on the Upstream Port. Once DPC recovers, pcie_do_recovery() walks down the hierarchy and invokes pcie_portdrv_slot_reset() to restore each port's config space. At that point, a hotplug interrupt is signaled per PCIe Base Spec r5.0, section 6.7.3.4 "Software Notification of Hot-Plug Events": If the Port is enabled for edge-triggered interrupt signaling using MSI or MSI-X, an interrupt message must be sent every time the logical AND of the following conditions transitions from FALSE to TRUE: [...] * The Hot-Plug Interrupt Enable bit in the Slot Control register is set to 1b. * At least one hot-plug event status bit in the Slot Status register and its associated enable bit in the Slot Control register are both set to 1b. Prevent pciehp from gratuitously bringing down the slot by clearing the error-induced Data Link Layer State Changed event before restoring config space. Afterwards, check whether the link has unexpectedly failed to retrain and synthesize a DLLSC event if so. Allow each pcie_port_service_driver (one of them being pciehp) to define a slot_reset callback and re-use the existing pm_iter() function to iterate over the callbacks. Thereby, the Endpoint driver remains bound throughout error recovery and may restore the device to working state. Surprise removal during error recovery is detected through a Presence Detect Changed event. The hotplug port is expected to not signal that event as a result of a Hot Reset. The issue isn't DPC-specific, it also occurs when an error is handled by AER through aer_root_reset(). So while the issue was noticed only now, it's been around since 2006 when AER support was first introduced. [bhelgaas: drop PCI_ERROR_RECOVERY Kconfig, split pm_iter() rename to preparatory patch] Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/ Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver") Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com> Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.19+: ba952824e6c1: PCI/portdrv: Report reset for frozen channel Cc: Keith Busch <kbusch@kernel.org>
2021-10-15PCI/portdrv: Rename pm_iter() to pcie_port_device_iter()Lukas Wunner
Rename pm_iter() to pcie_port_device_iter() and make it visible outside CONFIG_PM and portdrv_core.c so it can be used for pciehp slot reset recovery. [bhelgaas: split into its own patch] Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/ Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-15xen/pcifront: Use to_pci_driver() instead of pci_dev->driverUwe Kleine-König
Struct pci_driver contains a struct device_driver, so for PCI devices, it's easy to convert a device_driver * to a pci_driver * with to_pci_driver(). The device_driver * is in struct device, so we don't need to also keep track of the pci_driver * in struct pci_dev. Replace pdev->driver with to_pci_driver(). This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-10-15xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrvUwe Kleine-König
pcifront_common_process() exits early if pcidev or pcidev->driver are NULL, so simplify it by not checking them again. [bhelgaas: split flag change to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-4-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-10-15PCI: uniphier: Serialize INTx masking/unmasking and fix the bit operationKunihiko Hayashi
The condition register PCI_RCV_INTX is used in irq_mask() and irq_unmask() callbacks. Accesses to register can occur at the same time without a lock. Add a lock into each callback to prevent the issue. And INTX mask and unmask fields in PCL_RCV_INTX register should only be set/reset for each bit. Clearing by PCL_RCV_INTX_ALL_MASK should be removed. INTX status fields in PCL_RCV_INTX register only indicates each INTX interrupt status, so the handler can't clear by writing 1 to the field. The status is expected to be cleared by the interrupt origin. The ack function has no meaning, so should remove it. Suggested-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/1631924579-24567-1-git-send-email-hayashi.kunihiko@socionext.com Fixes: 7e6d5cd88a6f ("PCI: uniphier: Add UniPhier PCIe host controller support") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org>
2021-10-15PCI: qcom: Add sc8180x compatibleBjorn Andersson
The SC8180x platform comes with 4 PCIe controllers, typically used for things such as NVME storage or connecting a SDX55 5G modem. Add a compatible for this, that just reuses the 1.9.0 ops. Link: https://lore.kernel.org/linux-arm-msm/20210725040038.3966348-4-bjorn.andersson@linaro.org/ Link: https://lore.kernel.org/r/20210823154958.305677-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated match data structure] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-10-14PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280Prasad Malisetty
On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src must be the TCXO while gdsc is enabled. After PHY init successful clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. Link: https://lore.kernel.org/r/1633628923-25047-6-git-send-email-pmaliset@codeaurora.org Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
2021-10-14PCI: qcom: Replace ops with struct pcie_cfg in pcie match dataPrasad Malisetty
Add struct qcom_pcie_cfg as match data for all platforms. Assign appropriate platform ops into struct qcom_pcie_cfg and read using of_device_get_match_data() in qcom_pcie_probe(). Link: https://lore.kernel.org/r/1633628923-25047-5-git-send-email-pmaliset@codeaurora.org Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
2021-10-14PCI/switchtec: Add check of event supportLogan Gunthorpe
Not all events are supported by every gen/variant of the Switchtec firmware. To solve this, since Gen4, a new bit in each event header is introduced to indicate if an event is supported by the firmware. Link: https://lore.kernel.org/r/20211014141859.11444-6-kelvin.cao@microchip.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-14PCI/switchtec: Replace ENOTSUPP with EOPNOTSUPPKelvin Cao
ENOTSUPP is not a SUSV4 error code, and the following checkpatch.pl warning will be given for new patches which still use ENOTSUPP. WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP See the link below for the discussion. https://lore.kernel.org/netdev/20200511165319.2251678-1-kuba@kernel.org/ Replace ENOTSUPP with EOPNOTSUPP to align with future patches which will be using EOPNOTSUPP. Link: https://lore.kernel.org/r/20211014141859.11444-5-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-14PCI/switchtec: Update the way of getting management VEP instance IDKelvin Cao
Gen4 firmware adds DMA VEP and NVMe VEP support in VEP (virtual EP) instance ID register in addtion to management EP, update the way of getting management VEP instance ID. Link: https://lore.kernel.org/r/20211014141859.11444-4-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-14PCI/switchtec: Fix a MRPC error status handling issueKelvin Cao
If an error is encountered when executing a MRPC command, the firmware will set the status register to SWITCHTEC_MRPC_STATUS_ERROR and return the error code in the return value register. Add handling of SWITCHTEC_MRPC_STATUS_ERROR on status register when completing a MRPC command. Link: https://lore.kernel.org/r/20211014141859.11444-3-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-14PCI/switchtec: Error out MRPC execution when MMIO reads failKelvin Cao
A firmware hard reset may be initiated by various mechanisms including a UART interface, TWI sideband interface from BMC, MRPC command from userspace, etc. The switchtec management driver is unaware of these resets. The reset clears PCI state including the BARs and Memory Space Enable bits, so the device no longer responds to the MMIO accesses the driver uses to operate it. MMIO reads to the device will fail with a PCIe error. When the root complex handles that error, it typically fabricates ~0 data to complete the CPU read. Check for this sort of error by reading the device ID from MMIO space. This ID can never be ~0, so if we see that value, it probably means the PCIe Memory Read failed and we should return an error indication to the application using the switchtec driver. Link: https://lore.kernel.org/r/20211014141859.11444-2-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-13PCI: vmd: depend on !UMLJohannes Berg
With UML having enabled (simulated) PCI on UML, VMD breaks allyesconfig/allmodconfig compilation because it assumes it's running on X86_64 bare metal, and has hardcoded API use of ARCH=x86. Make it depend on !UML to fix this. Link: https://lore.kernel.org/r/20210811162530.affe26231bc3.I131b3c1e67e3d2ead6e98addd256c835fbef9a3e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
2021-10-12PCI: cpqphp: Format if-statement code block correctlyKrzysztof Wilczyński
The code block related to the if-statement in cpqhp_set_irq() is somewhat awkwardly formatted making the code hard to read. Make it readable. No change to functionality intended. Link: https://lore.kernel.org/r/20211013011412.1110829-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-12PCI/MSI: Handle msi_populate_sysfs() errors correctlyWang Hai
Previously, when msi_populate_sysfs() failed, we saved the error return value as dev->msi_irq_groups, which leads to a page fault when free_msi_irqs() calls msi_destroy_sysfs(). To prevent this, leave dev->msi_irq_groups alone when msi_populate_sysfs() fails. Found by the Hulk Robot when injecting a memory allocation fault in msi_populate_sysfs(): BUG: unable to handle page fault for address: fffffffffffffff4 ... Call Trace: msi_destroy_sysfs+0x30/0xa0 free_msi_irqs+0x11d/0x1b0 Fixes: 2f170814bdd2 ("genirq/msi: Move MSI sysfs handling from PCI to MSI core") Link: https://lore.kernel.org/r/20211012071556.939137-1-wanghai38@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Barry Song <song.bao.hua@hisilicon.com>
2021-10-12PCI/ERR: Factor out common dev->driver expressionsBjorn Helgaas
Save the struct pci_driver pointer from pdev->driver instead of repeating it several times. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-12PCI: Drop pci_device_probe() test of !pci_dev->driverUwe Kleine-König
When the device core calls the .probe() callback for a device, the device is never bound, so pci_dev->driver is always NULL. Remove the unnecessary test of !pci_dev->driver. Link: https://lore.kernel.org/r/20211004125935.2300113-3-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-10-12PCI: Drop pci_device_remove() test of pci_dev->driverUwe Kleine-König
When the driver core calls pci_device_remove(), there is a driver bound to the device, so pci_dev->driver is never NULL. Remove the unnecessary test of pci_dev->driver. Link: https://lore.kernel.org/r/20211004125935.2300113-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-10-12PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()Krzysztof Wilczyński
Cppcheck warns that pci_dev_str_match_path() passes pointers to signed ints to sscanf("%x"), which expects pointers to *unsigned* ints: invalidScanfArgType_int drivers/pci/pci.c:312 %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. Declare the variables as unsigned to avoid this issue. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20211008222732.2868493-3-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-12PCI: hv: Remove unnecessary use of %hxKrzysztof Wilczyński
"dom_req" is a u16 but varargs automatically promotes it to int, so there's no point in using the %h modifier. Drop it. See cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") and 70eb2275ff8e ("checkpatch: add warning for unnecessary use of %h[xudi] and %hh[xudi]"). Link: https://lore.kernel.org/r/20211008222732.2868493-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-12PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled ↵Adrian Huang
by IOMMU When enabling VMD in BIOS setup (Ice Lake Processor: Whitley platform), the host OS cannot boot successfully with the following error message: nvme nvme0: I/O 12 QID 0 timeout, completion polled nvme nvme0: Shutdown timeout set to 6 seconds DMAR: DRHD: handling fault status reg 2 DMAR: [INTR-REMAP] Request device [0x00:0x00.5] fault index 0xa00 [fault reason 0x25] Blocked a compatibility format interrupt request The request device is the VMD controller: # lspci -s 0000:00.5 -nn 0000:00:00.5 RAID bus controller [0104]: Intel Corporation Volume Management Device NVMe RAID Controller [8086:28c0] (rev 04) `git bisect` points to this offending commit ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible"), which disables VMD MSI remapping. The IOMMU hardware blocks the compatibility format interrupt request because Interrupt Remapping Enable Status (IRES) and Extended Interrupt Mode Enable (EIME) are enabled. Please refer to section "5.1.4 Interrupt-Remapping Hardware Operation" in Intel VT-d spec. To fix the issue, VMD driver still enables the interrupt remapping irrespective of VMD_FEAT_CAN_BYPASS_MSI_REMAP if the IOMMU subsystem enables the interrupt remapping. Test configuration is shown as follows: * Two VMD controllers 1. 8086:28c0 (Whitley's VMD) 2. 8086:201d (Purley's VMD: The issue does not appear in this controller. Just make sure if any side effect occurs.) * w/wo intremap=off Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214219 Link: https://lore.kernel.org/r/20210901124047.1615-1-adrianhuang0701@gmail.com Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Cc: Jon Derrick <jonathan.derrick@intel.com> Cc: Nirmal Patel <nirmal.patel@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de>
2021-10-12PCI: dwc: Perform host_init() before registering msiBjorn Andersson
On the Qualcomm sc8180x platform the bootloader does something related to PCI that leaves a pending "msi" interrupt, which with the current ordering often fires before init has a chance to enable the clocks that are necessary for the interrupt handler to access the hardware. Move the host_init() call before the registration of the "msi" interrupt handler to ensure the host driver has a chance to enable the clocks. The assignment of the bridge's ops and child_ops is moved along, because at least the TI Keystone driver overwrites these in its host_init callback. Link: https://lore.kernel.org/r/20210823154958.305677-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-10-11PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driverManivannan Sadhasivam
Add driver for Qualcomm PCIe Endpoint controller based on the DesignWare core with added Qualcomm-specific wrapper around the core. The driver support is very basic such that it supports only enumeration, PCIe read/write, and MSI. There is no ASPM and PM support for now but these will be added later. The driver is capable of using the PERST# and WAKE# side-band GPIOs for operation and written on top of the DWC PCI framework. [bhelgaas: wrap a few long lines] Co-developed-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: restructured the driver and fixed several bugs for upstream] Link: https://lore.kernel.org/r/20210920065946.15090-3-manivannan.sadhasivam@linaro.org Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-10-11PCI/VPD: Add pci_read/write_vpd_any()Heiner Kallweit
In certain cases we need a variant of pci_read_vpd()/pci_write_vpd() that does not check against dev->vpd.len. Such cases are: - Reading VPD if dev->vpd.len isn't set yet (in pci_vpd_size()) - Devices that map non-VPD information to arbitrary places in VPD address space (example: Chelsio T3 EEPROM write-protect flag) Therefore add pci_read_vpd_any() and pci_write_vpd_any() that check against PCI_VPD_MAX_SIZE only. Link: https://lore.kernel.org/r/93ecce28-a158-f02a-d134-8afcaced8efe@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08Merge tag 's390-5.15-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix potential memory leak on a error path in eBPF - Fix handling of zpci device on reserve * tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix zpci_zdev_put() on reserve bpf, s390: Fix potential memory leak about jit_data
2021-10-08PCI: Correct misspelled and remove duplicated wordsKrzysztof Wilczyński
Correct a number of misspelled words and remove any words that were duplicated in the PCI tree. No change to functionality intended. Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-08Merge tag 'acpi-5.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recent ACPI-related regression in the PCI subsystem that introduced a NULL pointer dereference possible to trigger from user space via sysfs on some systems" * tag 'acpi-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI: ACPI: Check parent pointer in acpi_pci_find_companion()
2021-10-08PCI: rcar-host: Remove unneeded includesGeert Uytterhoeven
Remove includes that are not needed, to speed up (re)compilation. Most of these are relics from splitting the driver in a host and a common part. [bhelgaas: use driver tag analogous to rcar-ep] Link: https://lore.kernel.org/r/54bed9a0e6991490ddb2b07e5abfaf40a7a62928.1633090577.git.geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
generated by cgit (git 2.34.1) at 2025-09-15 06:16:06 +0000