| Age | Commit message (Collapse) | Author |
|---|
|
The value of pdev->rom_attr is the definitive indicator of the fact that
we're created a sysfs attribute. Check that rather than rom_size, which is
only used incidentally when deciding whether to create a sysfs attribute.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY bits are unused.
Remove them and code that depends on them.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Remove unnecessary indentation in pci_map_rom(). This is logically part of
the previous patch; I split it out to make the critical changes in that
patch more obvious. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When pci_create_sysfs_dev_files() created the "rom" sysfs file, it set the
sysfs file size to the actual size of a ROM BAR, or if there was no ROM BAR
but the platform provided a shadow copy in RAM, to 0x20000. 0x20000 is an
arch-specific length that should not be baked into the PCI core.
Every place that sets IORESOURCE_ROM_SHADOW also sets the size of the
PCI_ROM_RESOURCE, so use the resource length always.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root
complexes. These root complexes (loosely referred to as ECAM units in the
hardware manuals) are used to access the Thunder on-chip devices. They
are special in that all the BARs on devices behind these root complexes are
at fixed addresses.
Add a driver for these devices that synthesizes Enhanced Allocation (EA)
capability entries for each BAR.
Since this EA synthesis is needed for exactly two chip models, we can hard-
code some assumptions about the device topology and the layout of the
config space of specific DEVFNs in the driver.
[bhelgaas: changelog, whitespace]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
The root complexes used to access off-chip PCIe devices (called PEM units
in the hardware manuals) on some Cavium ThunderX processors require quirky
access methods for the config space of the PCIe bridge.
Add a driver to provide these config space accessor functions. Use the
pci-host-common code to configure the PCI machinery.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Move pci_host_common_probe() and associated functions to pci-host-common.c,
where it can be shared with other drivers. Make it public (not static)
and update Kconfig and Makefile to build it. No functional change
intended.
[bhelgaas: split into separate patch, changelog]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
|
|
Factor gen_pci_probe(), moving most of it into pci_host_common_probe()
where it can be shared with other drivers that have slightly different
config accessors. No functional change intended.
[bhelgaas: split into separate patch, changelog]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
|
|
Move definitions for generic PCI host controller driver structures to a
separate header file so we can share them with other drivers. No
functional change intended.
[bhelgaas: split into separate patch, changelog]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
|
|
Add PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
[bhelgaas: wait for link like dw_pcie_wait_for_link(), simplify bitmap
error path, typos, whitespace, fold in Dan Carpenter's PTR_ERR() fix]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
A SerDes PHY is optional, so if devm_phy_get() doesn't find one at all,
that's fine. But if devm_phy_get() finds a PHY that doesn't have a driver
yet, it returns -EPROBE_DEFER. In that case, defer probing the Keystone
driver. We may be able to load it later after a PHY driver is loaded.
[bhelgaas: changelog, check for -EPROBE_DEFER first]
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Originally altera_pcie_link_is_up() decided the link was up if any of the
low four bits of the LTSSM register were set. But the link is only up if
the LTSSM state is L0, so check for that exact value.
[bhelgaas: changelog]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Make the R-Car drivers depend on ARCH_RENESAS instead of ARCH_SHMOBILE.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS. The motivation is that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM-based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Some devices take longer than the spec indicates to return from FLR reset,
a notable case of this is Intel integrated graphics (IGD), which can often
take an additional 300ms powering down an attached LCD panel as part of the
FLR. Allow devices up to 1000ms, testing every 100ms whether the second
dword of config space is read as -1.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC
arch to use the generic PCI setup functions.
[bhelgaas: fold in Joao's pci-dma-compat.h & pci-bridge.h build fix (I
should have caught this myself, sorry]
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
|
|
On some devices, reading or writing VPD causes a system panic.
This can be easily reproduced by running "lspci -vvv" or
"cat /sys/bus/devices/XX../vpd".
Blacklist these devices so we don't access VPD data at all.
[bhelgaas: changelog, comment, drop pci/access.c changes]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=110681
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
|
|
Use usleep_range() instead of udelay() while waiting for a VPD access to
complete. This is not a performance path, so no need to hog the CPU.
Rationale for usleep_range() parameters:
We clear PCI_VPD_ADDR_F for a read (or set it for a write), then wait for
the device to change it. For a device that updates PCI_VPD_ADDR between
our config write and subsequent config read, we won't sleep at all and
can get the device's maximum rate.
Sleeping a minimum of 10 usec per 4-byte access limits throughput to
about 400Kbytes/second. VPD is small (32K bytes at most), and most
devices use only a fraction of that.
We back off exponentially up to 1024 usec per iteration. If we reach
1024, we've already waited up to 1008 usec (16 + 32 + ... + 512), so if
we miss an update and wait an extra 1024 usec, we can still get about
1/2 of the device's maximum rate.
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Here's another fix for v4.5. It fixes an ARM regression in v4.0 that
causes many boxes to crash on boot, including cns3xxx, dove,
footbridge, iopl13xx, ip32x, iop33x, ixp4xx, ks8695, mv78xx0, orion5x,
pxa, sa1100, etc.
The change is in code that's only built for ARM and ARM64.
Summary:
Enumeration:
Allow generic PCI domains without bridge "parent" pointer (Krzysztof Hałasa)"
* tag 'pci-v4.5-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
|
|
This adds weak function pcibios_bus_add_device() for arch dependent
code could do proper setup. For example, powerpc could setup EEH
related resources for SRIOV VFs.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
During EEH recovery, hotplug is applied to the devices which don't
have drivers or their drivers don't support EEH. However, the hotplug,
which was implemented based on PCI bus, can't be applied to VF directly.
Instead, we unplug and plug individual PCI devices (VFs).
This renames virtn_{add,remove}() and exports them so they can be used
in PCI hotplug during EEH recovery.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Log successful error injections so that injected errors can be
differentiated from real errors.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
|
|
The aer_inject driver is very quiet. In most cases, it merely returns an
error code to user-space, leaving the user with little clue about the
actual reason for the failure.
So, log error messages for 4 of the most frequent causes of failure:
* Can't find the root port of the specified device.
* Device doesn't support AER.
* Root port doesn't support AER.
* AER device not found.
This gives the user a chance to understand why aer-inject failed.
Based on a preliminary patch by Thomas Renninger.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
CC: Thomas Renninger <trenn@suse.de>
|
|
dev_warn() is better than printk(LOG_WARNING...) as it records which device
the message relates to. Also add a prefix "aer_inject:" to help
differentiate real errors from injected errors.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
|
|
EPERM means "Operation not permitted", which doesn't reflect the lack of
support for AER. EPROTONOSUPPORT (Protocol not supported) is a better
choice of error code if the device or its root port lack support for AER.
Likewise, EINVAL means "Invalid argument", which is not suitable for cases
where the AER error device is missing or unusable. ENODEV and
EPROTONOSUPPORT, respectively, fit better.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Borislav Petkov <bp@suse.de>
CC: Prarit Bhargava <prarit@redhat.com>
|
|
BARs are disabled when the size register is 0, so it's misleading to write
a base address into the start register.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Track the offsets of the bus -> CPU mapping for I/O and memory. This is
cosmetic for current Tegra chips because the offset is always 0. But to
properly support legacy use-cases, like VGA, this would be needed so that
PCI bus addresses can be relocated.
While at it, also request the I/O resource both in physical memory and I/O
space to make /proc/iomem consistent, as well as add the I/O region to the
list of host bridge resources.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The num_ports field of the tegra_pcie structure is never used so remove it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The configuration space mapping on Tegra is somewhat special, and in order
to avoid wasting virtual address space the configuration space for each bus
needs to be stitched together from several blocks which form a single
continuous virtual address range for accessors.
Currently the configuration space is mapped upon the first access to one of
its registers. However, the mapping operation may sleep under certain
circumstances, so doing it from the configuration space accessors (they are
protected by a spin lock) will trigger a warning.
To avoid the warning, use the ->add_bus() callback to perform the mapping
at enumeration time when the operation is allowed to sleep. Also add an
implementation of ->remove_bus() that undoes the mapping established by the
->add_bus() callback. While it isn't currently possible to unload the
module, there is work underway to remedy this, and this code will come in
handy when that happens.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add pci_ops.{add,remove}_bus() callbacks, which will be called on every
newly created bus and when a bus is being removed, respectively. This can
be used by drivers to implement driver-specific initialization and teardown
of the bus, in addition to the architecture-specifics implemented by the
pcibios_add_bus() and the pcibios_remove_bus() functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Include pci/hotplug/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/hotplug/Kconfig.
Note that this effectively adds pci/hotplug/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/hotplug/Kconfig:
alpha
arm
avr32
frv
m68k
microblaze
mn10300
sparc
unicore32
Inspired-by-patch-from: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't
have to source both pci/Kconfig and pci/pcie/Kconfig.
Note that this effectively adds pci/pcie/Kconfig to the following
arches, because they already sourced drivers/pci/Kconfig but they
previously did not source drivers/pci/pcie/Kconfig:
alpha
avr32
blackfin
frv
m32r
m68k
microblaze
mn10300
parisc
sparc
unicore32
xtensa
[bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace]
Signed-off-by: Sasa Bogicevic <brutallesale@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Modify the Microblaze PCI subsystem to work with the generic
drivers/pci/host/pcie-xilinx.c driver on Microblaze and Zynq.
[bhelgaas: changelog]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
|
|
The Xilinx AXI PCIe Host Bridge Soft IP driver was previously only
supported on ARM (in particular, on ARCH_ZYNC), and pci_fixup_irqs() is
available there. But Microblaze will do IRQ fixup in pcibios_add_device(),
so pci_fixup_irqs() is not available on Microblaze.
Don't call pci_fixup_irqs() on Microblaze, so the driver can work on both
Zynq and Microblaze Architectures.
[bhelgaas: revise changelog to show similarity to bdb8a1844f31 ("PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM")]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
|
|
The Xilinx PCIe host controller driver uses pci_common_init_dev(), which
is ARM-specific and requires the ARM struct hw_pci. The part of
pci_common_init_dev() that is needed is limited and can be done here
without using hw_pci.
Create and scan the root bus directly without using the ARM
pci_common_init_dev() interface.
[bhelgaas: revise changelog to show similarity to 79953dd22c1d ("PCI: rcar: Remove dependency on ARM-specific struct hw_pci")]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
|
|
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF
DT parser.
[bhelgaas: revise changelog to show similarity to 0021d22b73d6 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")]
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
|
|
IORESOURCE_ROM_SHADOW means there is a copy of a device's option ROM in
RAM. The existence of such a copy and its location are arch-specific.
Previously the IORESOURCE_ROM_SHADOW flag was set in arch code, but the
0xC0000-0xDFFFF location was hard-coded into the PCI core.
If we're using a shadow copy in RAM, disable the ROM BAR and release the
address space it was consuming. Move the location information from the PCI
core to the arch code that sets IORESOURCE_ROM_SHADOW. Save the location
of the RAM copy in the struct resource for PCI_ROM_RESOURCE.
After this change, pci_map_rom() will call pci_assign_resource() and
pci_enable_rom() for these IORESOURCE_ROM_SHADOW resources, which we did
not do before. This is safe because:
- pci_assign_resource() will do nothing because the resource is marked
IORESOURCE_PCI_FIXED, which means we can't move it, and
- pci_enable_rom() will not turn on the ROM BAR's enable bit because the
resource is marked IORESOURCE_ROM_SHADOW, which means it is in RAM
rather than in PCI memory space.
Storing the location in the struct resource means "lspci" will show the
shadow location, not the value from the ROM BAR.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
If we're using a RAM shadow copy instead of the ROM BAR, we don't need to
touch the ROM BAR enable bit.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
IORESOURCE_PCI_FIXED means the resource can't be moved, so if it's set,
don't bother trying to assign or reassign the resource.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_create_root_bus() passes a "parent" pointer to
pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined,
pci_bus_assign_domain_nr() dereferences that pointer. Many callers of
pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL
pointer dereference error.
7c674700098c ("PCI: Move domain assignment from arm64 to generic code")
moved the "parent" dereference from arm64 to generic code. Only arm64 used
that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it
always supplied a valid "parent" pointer. Other arches supplied NULL
"parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they
used a no-op version of pci_bus_assign_domain_nr().
8c7d14746abc ("ARM/PCI: Move to generic PCI domains") defined
CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use
pci_common_init(), which supplies a NULL "parent" pointer.
These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash
with a NULL pointer dereference like this while probing PCI:
Unable to handle kernel NULL pointer dereference at virtual address 000000a4
PC is at pci_bus_assign_domain_nr+0x10/0x84
LR is at pci_create_root_bus+0x48/0x2e4
Kernel panic - not syncing: Attempted to kill init!
[bhelgaas: changelog, add "Reported:" and "Fixes:" tags]
Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1
Fixes: 8c7d14746abc ("ARM/PCI: Move to generic PCI domains")
Fixes: 7c674700098c ("PCI: Move domain assignment from arm64 to generic code")
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: stable@vger.kernel.org # v4.0+
|
|
Christoph added a generic include/linux/pci-dma-compat.h, so now there's
one place with most of the PCI DMA interfaces. Move more PCI DMA-related
things there:
- The PCI_DMA_* direction constants from linux/pci.h
- The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary()
CONFIG_PCI implementations from drivers/pci/pci.c
- The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary()
!CONFIG_PCI stubs from linux/pci.h
- The pci_set_dma_mask() and pci_set_consistent_dma_mask()
!CONFIG_PCI stubs from linux/pci.h
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Freescale Layerscape host bridge driver:
Fix MSG TLP drop setting (Minghuan Lian)
TI Keystone host bridge driver:
Fix MSI code that retrieves struct pcie_port pointer (Murali Karicheri)"
* tag 'pci-v4.5-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: layerscape: Fix MSG TLP drop setting
PCI: keystone: Fix MSI code that retrieves struct pcie_port pointer
|
|
We only support one flavor of VPD, so there's no need to complicate things
by having a "generic" struct pci_vpd and a more specific struct
pci_vpd_pci22.
Fold struct pci_vpd_pci22 directly into struct pci_vpd.
[bhelgaas: remove NULL check before kfree of dev->vpd (per kfreeaddr.cocci)]
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
|
|
There's only one kind of VPD, so we don't need to qualify it as "the
version described by PCI spec rev 2.2."
Rename the following symbols to remove unnecessary "pci22":
PCI_VPD_PCI22_SIZE -> PCI_VPD_MAX_SIZE
pci_vpd_pci22_size() -> pci_vpd_size()
pci_vpd_pci22_wait() -> pci_vpd_wait()
pci_vpd_pci22_read() -> pci_vpd_read()
pci_vpd_pci22_write() -> pci_vpd_write()
pci_vpd_pci22_ops -> pci_vpd_ops
pci_vpd_pci22_init() -> pci_vpd_init()
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
|
|
The struct pci_vpd_ops.release function pointer is always
pci_vpd_pci22_release(), so there's no need for the flexibility of a
function pointer.
Inline the pci_vpd_pci22_release() body into pci_vpd_release() and remove
pci_vpd_pci22_release() and the struct pci_vpd_ops.release function
pointer.
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
|
|
Move pci_vpd_release() so it's next to the other VPD functions. This puts
it next to pci_vpd_pci22_init(), which allocates the space freed by
pci_vpd_release().
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
|
|
pci_read_vpd() and pci_write_vpd() were stranded in the middle of config
accessor functions. Move them close to the other VPD code in the file.
No functional change.
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
|
|
PCI-2.2 VPD entries have a maximum size of 32k, but might actually be
smaller than that. To figure out the actual size one has to read the VPD
area until the 'end marker' is reached.
Per spec, reading outside of the VPD space is "not allowed." In practice,
it may cause simple read errors or even crash the card. To make matters
worse not every PCI card implements this properly, leaving us with no 'end'
marker or even completely invalid data.
Try to determine the size of the VPD data when it's first accessed. If no
valid data can be read an I/O error will be returned when reading or
writing the sysfs attribute.
As the amount of VPD data is unknown initially the size of the sysfs
attribute will always be set to '0'.
[bhelgaas: changelog, use 0/1 (not false/true) for bitfield, tweak
pci_vpd_pci22_read() error checking]
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
|
|
Make struct pci_vpd_pci22.busy a 1-bit field instead of a bool. We intend
to add another flag, and two bitfields are cheaper than two bools.
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
|
|
It is not always possible to determine the actual size of the VPD
data, so allow access to them if the size is set to '0'.
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
|
|
The settings in GPR8 are dependent upon the particular layout of the
hardware platform. As such, they should be configurable via the device
tree.
Look up PHY Tx driver settings from the device tree. Fall back to the
original hard-coded values if they are not specified in the device tree.
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
|
