summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/bcm
AgeCommit message (Collapse)Author
2025-05-09pinctrl: bcm2835: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-3-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: iproc-gpio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-2-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: nsp-gpio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-1-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-17pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()Dan Carpenter
The next line checks if this regmap_write() failed, but it doesn't work because the assignment was accidentally left out. Add the assignment. Fixes: 60d69769c851 ("pinctrl: bcm281xx: Add support for BCM21664 pinmux") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/dfc15d59-7fa9-4f96-aacb-37c3df6d420d@stanley.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-05pinctrl: bcm281xx: Add support for BCM21664 pinmuxArtur Weber
BCM21664 is another chip from the Kona line of Broadcom SoCs, and its pinmux shares a lot of similarities with the BCM281xx pinmux. Add support for the BCM21664 pinmux controller to the BCM281xx driver. This also enables pinmux support for the BCM23550, which has an identical pinmux config to the BCM21664 (hence they can share a single compatible, brcm,bcm21664-pinctrl). Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-4-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-05pinctrl: bcm281xx: Provide pinctrl device info as OF platform dataArtur Weber
Introduce a new struct type, "bcm281xx_pinctrl_info", that holds information about the pins, pin functions and regmap config for a pin control chip. Create such a struct for the BCM218xx and pass it as device data for the OF compatible match. This is done in preparation for introducing additional chip types to the driver. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-3-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-05pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned"Artur Weber
Replace uses of bare "unsigned" with "unsigned int" to fix checkpatch warnings. No functional change. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-2-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-03-04pinctrl: bcm2835: don't -EINVAL on alternate funcs from get_direction()Bartosz Golaszewski
Since commit 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") we check the return value of the get_direction() callback as per its API contract. This driver returns -EINVAL if the pin in question is set to one of the alternative (non-GPIO) functions. This isn't really an error that should be communicated to GPIOLIB so default to returning the "safe" value of INPUT in this case. The GPIO subsystem does not have the notion of "unknown" direction. Fixes: 9d846b1aebbe ("gpiolib: check the return value of gpio_chip::get_direction()") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/20250219102750.38519-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-01-15pinctrl: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/20250114203602.1013275-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-11-22Fix a potential abuse of seq_printf() format string in driversDavid Wang
Using device name as format string of seq_printf() is proned to "Format string attack", opens possibility for exploitation. Seq_puts() is safer and more efficient. Signed-off-by: David Wang <00107082@163.com> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20241120053055.225195-1-00107082@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-24pinctrl: bcm2835: fix module autoloadingLiao Chen
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/20240820122604.42736-1-liaochen4@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-07-21Merge tag 'pinctrl-v6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Some new drivers is the main part, the rest is cleanups and nonurgent fixes. Nothing much special about this, no core changes this time. New drivers: - Renesas RZ/V2H(P) SoC - NXP Freescale i.MX91 SoC - Nuvoton MA35D1 SoC - Qualcomm PMC8380, SM4250, SM4250 LPI Enhancements: - A slew of scoped-based simplifications of of_node_put()" * tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits) pinctrl: renesas: rzg2l: Support output enable on RZ/G2L pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions pinctrl: renesas: rzg2l: Clarify OEN read/write support dt-bindings: pinctrl: pinctrl-single: Fix pinctrl-single,gpio-range description dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties pinctrl: freescale: Use scope based of_node_put() cleanups pinctrl: equilibrium: Use scope based of_node_put() cleanups pinctrl: ti: iodelay: Use scope based of_node_put() cleanups pinctrl: qcom: lpass-lpi: increase MAX_NR_GPIO to 32 pinctrl: cy8c95x0: Update cache modification pinctrl: cy8c95x0: Use cleanup.h pinctrl: renesas: r8a779h0: Remove unneeded separators pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and function pinctrl: renesas: r8a779g0: Remove unneeded separators pinctrl: renesas: r8a779h0: Add AVB MII pins and groups pinctrl: renesas: r8a779g0: Fix TPU suffixes pinctrl: renesas: r8a779g0: Fix TCLK suffixes pinctrl: renesas: r8a779g0: FIX PWM suffixes pinctrl: renesas: r8a779g0: Fix IRQ suffixes ...
2024-06-26pinctrl: bcm: bcm63xx: Use scope based of_node_put() cleanupsPeng Fan
Use scope based of_node_put() cleanup to simplify code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/20240504-pinctrl-cleanup-v2-16-26c5f2dc1181@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-17pinctrl: add missing MODULE_DESCRIPTION() macrosJeff Johnson
When ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/bcm/pinctrl-bcm4908.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_i2c.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08_spi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/pinctrl-mcp23s08.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pinctrl/meson/pinctrl-meson.o Add the missing invocation of the MODULE_DESCRIPTION() macro to all files which have a MODULE_LICENSE(). This includes many meson drivers which, although they did not produce a warning with the x86 allmodconfig configuration, may cause this warning with ARM or ARM64 configurations. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for Amlogic Pinctrl drivers Link: https://lore.kernel.org/r/20240610-md-drivers-pinctrl-v1-1-68462e3d960c@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-17pinctrl: bcm2835: Use string_choices API instead of ternary operatorStefan Wahren
Use modern string_choices API instead of manually determining the output using ternary operator. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240603181938.76047-3-wahrenst@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-06-17pinctrl: bcm2835: Fix permissions of persist_gpio_outputsStefan Wahren
The commit 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior configurable") unintentionally made the module parameter persist_gpio_outputs changeable at runtime. So drop the write permission in order to make the freeing behavior predictable for user applications. Fixes: 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior configurable") Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Closes: https://lore.kernel.org/linux-gpio/Zjk-C0nLmlynqLAE@surfacebook.localdomain/ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240603181938.76047-2-wahrenst@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-05-06pinctrl: bcm2835: Make pin freeing behavior configurableStefan Wahren
Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN. So in case it was configured as GPIO_OUT before the configured output level also get lost. As long as GPIO sysfs was used this wasn't actually a problem because the pins and their possible output level were kept by sysfs. Since more and more Raspberry Pi users start using libgpiod they are confused about this behavior. So make the pin freeing behavior of GPIO_OUT configurable via module parameter. In case pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is kept. This patch based on the downstream work of Phil Elwell. Link: https://github.com/raspberrypi/linux/pull/6117 Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Message-ID: <20240503062745.11298-1-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-03-28pinctrl: bcm2835: Implement bcm2711_pinconf_getStefan Wahren
The BCM2711 allows to read the bias config. So implement pin_conf_get accordingly. The pull resistor values has been taken from the BCM2711/7211 datasheet. This implementation assumes that BCM7211 behaves the same way. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Message-ID: <20240307070113.4888-3-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-03-28pinctrl: bcm2835: Implement bcm2835_pinconf_getStefan Wahren
Even the driver already has implemented pin_dbg_show, it could be helpful to implement pin_conf_get for a more generic behavior. Contrary to the BCM2711, the BCM2835 SOC doesn't allow to read the bias config, so the implementation is limited to the basics. Keep ENOTSUPP here, because it's only used internally. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Message-ID: <20240307070113.4888-2-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-12pinctrl: bcm: Convert to use grp memberAndy Shevchenko
Convert drivers to use grp member embedded in struct group_desc, because other members will be removed to avoid duplication and desynchronisation of the generic pin group description. Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231211190321.307330-6-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-04treewide: rename pinctrl_gpio_free_new()Bartosz Golaszewski
Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new' suffix from its improved variant. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-04treewide: rename pinctrl_gpio_request_new()Bartosz Golaszewski
Now that pinctrl_gpio_request() is no longer used, let's drop the '_new' suffix from its improved variant. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-04pinctrl: bcm: use new pinctrl GPIO helpersBartosz Golaszewski
Replace the pinctrl helpers taking the global GPIO number as argument with the improved variants that instead take a pointer to the GPIO chip and the controller-relative offset. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-10-30pinctrl: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231009172923.2457844-18-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-10pinctrl: nsp-gpio: Silence probe deferral messagesFlorian Fainelli
We can have gpiochip_add_data() return -EPROBE_DEFER which will make us produce the "unable to add GPIO chip" message which is confusing. Use dev_err_probe() to silence probe deferral messages. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230808180733.2081353-3-florian.fainelli@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-10pinctrl: iproc-gpio: Silence probe deferral messagesFlorian Fainelli
We can have gpiochip_add_data() return -EPROBE_DEFER which will make us produce the "unable to add GPIO chip" message which is confusing. Use dev_err_probe() to silence probe deferral messages. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230808180733.2081353-2-florian.fainelli@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-07-20pinctrl: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230714174901.4062397-1-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-08pinctrl: bcm2835: Handle gpiochip_add_pin_range() errorsChristophe JAILLET
gpiochip_add_pin_range() can fail, so better return its error code than a hard coded '0'. Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/98c3b5890bb72415145c9fe4e1d974711edae376.1681681402.git.christophe.jaillet@wanadoo.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-02Merge tag 'pinctrl-v6.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Mostly drivers! Nothing special: some new Qualcomm chips as usual, and the new NXP S32 and nVidia BlueField-3. Core changes: - Make a lot of pin controllers with GPIO and irqchips immutable, i.e. not living structs, but const structs. This is driving a changed initiated by the irqchip maintainers. New drivers: - New driver for the NXP S32 SoC pin controller - As part of a thorough cleanup and restructuring of the Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were folded into the Mediatek directory and the family is renamed "mtmips". The Ralink chips live on as Mediatek MIPS family where new variants can be added. As part of this work also the device tree bindings were reworked. - New subdriver for the Qualcomm SM7150 SoC. - New subdriver for the Qualcomm IPQ9574 SoC. - New driver for the nVidia BlueField-3 SoC. - Support for the Qualcomm PMM8654AU mixed signal circuit GPIO. - Support for the Qualcomm PMI632 mixed signal circuit GPIO. Improvements: - Add some missing pins and generic cleanups on the Renesas r8a779g0 and r8a779g0 pin controllers. Generic Renesas extension for power source selection on several SoCs. - Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers - Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver. - Several device tree binding cleanups as the binding YAML syntax is solidifying" * tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits) pinctrl-bcm2835.c: fix race condition when setting gpio dir dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2" dt-bindings: pinctrl: qcom: Add few missing functions pinctrl: qcom: spmi-gpio: Add PMI632 support dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 pinctrl: wpcm450: select MFD_SYSCON pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip pinctrl: qcom spmi-mpp: Convert to immutable irq_chip pinctrl: plgpio: Convert to immutable irq_chip pinctrl: pistachio: Convert to immutable irq_chip pinctrl: pic32: Convert to immutable irq_chip pinctrl: sx150x: Convert to immutable irq_chip pinctrl: stmfx: Convert to immutable irq_chip pinctrl: st: Convert to immutable irq_chip pinctrl: mcp23s08: Convert to immutable irq_chip pinctrl: equilibrium: Convert to immutable irq_chip pinctrl: npcm7xx: Convert to immutable irq_chip pinctrl: armada-37xx: Convert to immutable irq_chip pinctrl: nsp: Convert to immutable irq_chip ...
2023-04-21pinctrl-bcm2835.c: fix race condition when setting gpio dirHans Verkuil
In the past setting the pin direction called pinctrl_gpio_direction() which uses a mutex to serialize this. That was changed to set the direction directly in the pin controller driver, but that lost the serialization mechanism. Since the direction of multiple pins are in the same register you can have a race condition, something that was in fact observed with the cec-gpio driver. Add a new spinlock to serialize writing to the FSEL registers. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 1a4541b68e25 ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()") Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-04-14pinctrl: nsp: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-2-503788a7f6e6@linaro.org
2023-04-14pinctrl: iproc: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230403-immutable-irqchips-v1-1-503788a7f6e6@linaro.org
2023-04-13pinctrl: bcm: ns: remove MODULE_LICENSE in non-modulesNick Alcock
Since commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: linux-modules@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-01-26pinctrl: bcm2835: Switch to use ->add_pin_ranges()Andy Shevchenko
Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers, this one requires it to support quite old firmware descriptions that do not have gpio-ranges property. The change allows to clean up GPIO library from OF specifics. There is no functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-26pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()Andy Shevchenko
Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(), there is no counterpart of_node_get() for it. Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-24pinctrl: bcm: Add missing header(s)Andy Shevchenko
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-11Merge tag 'pinctrl-v6.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...
2022-10-04pinctrl: bcm: Remove unused struct bcm6328_pingroupYuan Can
After commit 0e3db16300fb("pinctrl: bcm: Convert drivers to use struct pingroup and PINCTRL_PINGROUP()"), no one use struct bcm6328_pingroup, so remove it. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220927133926.103943-1-yuancan@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: bcm: ns: Remove redundant dev_err callShang XiaoJing
devm_ioremap_resource() prints error message in itself. Remove the dev_err call to avoid redundant error message. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20220923101038.18036-1-shangxiaojing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-25pinctrl: bcm: Convert drivers to use struct pingroup and PINCTRL_PINGROUP()Andy Shevchenko
The pin control header provides struct pingroup and PINCTRL_PINGROUP() macro. Utilize them instead of open coded variants in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220620165053.74170-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c) Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset) Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-10Merge tag 'pinctrl-v6.0-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Outside the pinctrl driver and DT bindings we hit some Arm DT files, patched by the maintainers. Other than that it is business as usual. Core changes: - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver). New drivers: - Intel Meteor Lake support. - Reneasas RZ/V2M and r8a779g0 (R-Car V4H). - AXP209 variants AXP221, AXP223 and AXP809. - Qualcomm MSM8909, PM8226, PMP8074 and SM6375. - Allwinner D1. Improvements: - Proper pin multiplexing in the AMD driver. - Mediatek MT8192 can use generic drive strength and pin bias, then fixes on top plus some I2C pin group fixes. - Have the Allwinner Sunplus SP7021 use the generic DT schema and make interrupts optional. - Handle Qualcomm SC7280 ADSP. - Handle Qualcomm MSM8916 CAMSS GP clock muxing. - High impedance bias on ZynqMP. - Serialize StarFive access to MMIO. - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO" * tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits) dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM pinctrl: qcom: sm8250: Fix PDC map pinctrl: amd: Fix an unused variable dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp dt-bindings: pinctrl: mt8186: Add gpio-line-names property ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header pinctrl: amd: Use unicode for debugfs output pinctrl: amd: Fix newline declaration in debugfs output pinctrl: at91: Fix typo 'the the' in comment dt-bindings: pinctrl: st,stm32: Correct 'resets' property name pinctrl: mvebu: Missing a blank line after declarations. pinctrl: qcom: Add SM6375 TLMM driver dt-bindings: pinctrl: Add DT schema for SM6375 TLMM dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable" pinctrl: imx93: Add MODULE_DEVICE_TABLE() pinctrl: sunxi: Add driver for Allwinner D1 pinctrl: sunxi: Make some layout parameters dynamic pinctrl: sunxi: Refactor register/offset calculation ...
2022-06-26pinctrl: bcm2835: Make the irqchip immutableStefan Wahren
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as immutable") added a warning to indicate if the gpiolib is altering the internals of irqchips. The bcm2835 pinctrl is also affected by this warning. Fix this by making the irqchip in the bcm2835 pinctrl driver immutable. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220614202831.236341-3-stefan.wahren@i2se.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26pinctrl: bcm2835: drop irq_enable/disable callbacksStefan Wahren
The commit b8a19382ac62 ("pinctrl: bcm2835: Fix support for threaded level triggered IRQs") assigned the irq_mask/unmask callbacks with the already existing functions for irq_enable/disable. The wasn't completely the right way (tm) to fix the issue, because these callbacks shouldn't be identical. So fix this by rename the functions to represent their intension and drop the unnecessary irq_enable/disable assigment. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220614202831.236341-2-stefan.wahren@i2se.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner
(part 2) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21pinctrl: bcm2835: implement hook for missing gpio-rangesStefan Wahren
The commit c8013355ead6 ("ARM: dts: gpio-ranges property is now required") fixed the GPIO probing issues caused by "pinctrl: bcm2835: Change init order for gpio hogs". This changed only the kernel DTS files. Unfortunately it isn't guaranteed that these files are shipped to all users. So implement the necessary backward compatibility for BCM2835 and BCM2711 platform. Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220409095129.45786-3-stefan.wahren@i2se.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-28Merge tag 'pinctrl-v5.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time. Just new driver code and improvements! New drivers: - New driver for the Broadcom BCM4908 SoC. - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative of the Samsung Exynos pin control driver. - New driver for the Amlogic Meson S4 SoC. - New driver for the Sunplus SP7021 SoC. - New driver for the Microsemi Ocelot family ServalT SoC. - New subdriver for Intel Alder Lake-M SoC. - New subdriver for Intel Ice Lake-N SoC, including PCH support. - New subdriver for Renesas R8A779F0 SoC. - New subdriver for Mediatek MT8186 SoC. - New subdriver for NXP Freescale i.MX93 SoC. - New driver for Nuvoton WPCM450 SoC. - New driver for Qualcomm SC8280XP SoC. Improvements: - Wakeup support on Samsung Exynos850 and ExynosAutov9. - Serious and voluminous maintenance cleanup and refactoring in the Renesas drivers. Mainly sharing similar data between the different SoC subdrivers. - Qualcomm SM8450 EGPIO support. - Drive strength support on the Mediatek MT8195. - Add some missing groups and functions to the Ralink RT2880" * tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits) pinctrl: mediatek: common-v1: fix semicolon.cocci warnings pinctrl: nuvoton: wpcm450: Fix build error without OF pinctrl: qcom-pmic-gpio: Add support for pm8450 dt-bindings: pinctrl: aspeed: Update gfx node in example dt-bindings: pinctrl: rt2880: add missing pin groups and functions pinctrl: ingenic: Fix regmap on X series SoCs pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register() pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS pinctrl: nuvoton: Fix sparse warning pinctrl: mediatek: mt8186: Account for probe refactoring pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback pinctrl: mediatek: common-v1: Commonize spec_pupd callback pinctrl: mediatek: common-v1: Use common probe function pinctrl: mediatek: common-v1: Add common probe function pinctrl: mediatek: paris: Unify probe function by using OF match data pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe pinctrl: berlin: fix error return code of berlin_pinctrl_build_state() pinctrl: qcom: Introduce sc8280xp TLMM driver ...
2022-01-30pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAPJulian Braha
When PINCTRL_BCM63XX is selected, and REGMAP is not selected, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for GPIO_REGMAP Depends on [n]: GPIOLIB [=y] && REGMAP [=n] Selected by [y]: - PINCTRL_BCM63XX [=y] && PINCTRL [=y] This is because PINCTRL_BCM63XX selects GPIO_REGMAP without selecting or depending on REGMAP, despite GPIO_REGMAP depending on REGMAP. This unmet dependency bug was detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha <julianbraha@gmail.com> Link: https://lore.kernel.org/r/20220117062557.89568-1-julianbraha@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-01-30pinctrl: bcm2835: Fix a few error pathsFlorian Fainelli
After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") a few error paths would not unwind properly the registration of gpio ranges. Correct that by assigning a single error label and goto it whenever we encounter a fatal error. Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-01-25pinctrl: bcm: add driver for BCM4908 pinmuxRafał Miłecki
BCM4908 has its own pins layout so it needs a custom binding and a Linux driver. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-07-29 19:49:12 +0000