| Age | Commit message (Collapse) | Author |
|---|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
Use the function usb_endpoint_num() rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250519061317.724602-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb core avoids sending a Set-Interface altsetting 0 request after device
reset, and instead relies on calling usb_disable_interface() and
usb_enable_interface() to flush and reset host-side of those endpoints.
xHCI hosts allocate and set up endpoint ring buffers and host_ep->hcpriv
during usb_hcd_alloc_bandwidth() callback, which in this case is called
before flushing the endpoint in usb_disable_interface().
Call usb_disable_interface() before usb_hcd_alloc_bandwidth() to ensure
URBs are flushed before new ring buffers for the endpoints are allocated.
Otherwise host driver will attempt to find and remove old stale URBs
from a freshly allocated new ringbuffer.
Cc: stable <stable@kernel.org>
Fixes: 4fe0387afa89 ("USB: don't send Set-Interface after reset")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250514132520.225345-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This device exhibits I/O errors during file transfers due to unstable
link power management (LPM) behavior. The kernel logs show repeated
warm resets and eventual disconnection when LPM is enabled:
[ 3467.810740] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
[ 3467.810740] usb usb2-port5: do warm reset
[ 3467.866444] usb usb2-port5: not warm reset yet, waiting 50ms
[ 3467.907407] sd 0:0:0:0: [sda] tag#12 sense submit err -19
[ 3467.994423] usb usb2-port5: status 02c0, change 0001, 10.0 Gb/s
[ 3467.994453] usb 2-5: USB disconnect, device number 4
The error -19 (ENODEV) occurs when the device disappears during write
operations. Adding USB_QUIRK_NO_LPM disables link power management
for this specific device, resolving the stability issues.
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250508055947.764538-1-lijiayi@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well, and this resolves the following
merge conflicts that were reported in linux-next:
drivers/usb/chipidea/ci_hdrc_imx.c
drivers/usb/host/xhci.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As demonstrated by the fix for update_port_device_state,
commit 12783c0b9e2c ("usb: core: Prevent null pointer dereference in update_port_device_state"),
usb_hub_to_struct_hub() can return NULL in certain scenarios,
such as during hub driver unbind or teardown race conditions,
even if the underlying usb_device structure exists.
Plus, all other places that call usb_hub_to_struct_hub() in the same file
do check for NULL return values.
If usb_hub_to_struct_hub() returns NULL, the subsequent access to
hub->ports[udev->portnum - 1] will cause a null pointer dereference.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: f1bfb4a6fed6 ("usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250417195032.1811338-1-chenyuan0y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SanDisk 3.2Gen1 Flash Drive, which VID:PID is in 0781:55a3,
just like Silicon Motion Flash Drive:
https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
also needs the DELAY_INIT quirk, or it will randomly work incorrectly
(e.g.: lsusb and can't list this device info) when connecting Huawei
hisi platforms and doing thousand of reboot test circles.
Cc: stable <stable@kernel.org>
Signed-off-by: Miao Li <limiao@kylinos.cn>
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Link: https://lore.kernel.org/r/20250414062935.159024-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This device needs the NO_LPM quirk.
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250408135800.792515-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Silicon Motion Flash Drive connects to Huawei hisi platforms and
performs a system reboot test for two thousand circles, it will
randomly work incorrectly on boot, set DELAY_INIT quirk can workaround
this issue.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enabling LPM is done in hub workqueue, often in paths handling possible
link issues. So fail immediately on USB3 LPM issues and avoid hub wq
from unnecessary blocking, thus allowing it to handle other port events
faster.
Detect errors when enabling U1/U2 link states, and return immediately
if there is an issue.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250314142000.93090-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several usb requests are needed to allow a USB3 link to enter U1/U2
hardware link power management LPM states. Reorder these requests
and send the more significant and likely to succeed first.
This is similar to the change done for disabling LPM
Enable LPM by first sending requests to the upstream hub of the device
SetPortFeature(U1_TIMEOUT)
SetPortFeature(U2_TIMEOUT)
These are more likely to succeed due to the shorter path, and LPM can
be considered enabled as link may go to U1/U2 LPM states after those.
Send the requests to the device after this, they allow the device
to initialte U1/U2 link transitions. Hub can already initiate U1/U2
SetFeature(U1_ENABLE)
SetFeature(U2_ENABLE)
Fail fast and bail out if a requests to the device fails.
This changes device initated LPM policy a bit. Device is no longer
able to initiate U2 if it failed or is not allowed to initiate
U1.
Enabling and disabling Link power management is done as part of
hub work. Avoid trying to send additional USB requests to a device
when there are known issues. It just causes hub work to block for
even longer.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250314142000.93090-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enabling device initiated USB3 link power management (LPM) may fail for
various reasons such as too long system exit latency, or link issues.
These are not good reason to disable hub initiated LPM U1/U2
states, especially as it requires sending more requests over a
possibly broken link, causing the hub work to block for even longer.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250314142000.93090-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move device configured check into usb_device_may_initiate_lpm() instead
of calling it before the function.
No functional changes, helps rework to fail faster during link power
management (LPM) enabling.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250314142000.93090-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several usb requests are needed to allow or forbid a USB3 link from
going into U1 or U2 hardware link power management (LPM) states.
Fail fast on issues in LPM disabling path. LPM disabling is done in hub
workqueue paths that are often already handling possible link issues.
Enabling and disabling LPM involves four usb requests.
Two requests sent to the upstream hub of the connected device:
SetPortFeature(U1_TIMEOUT)
SetPortFeature(U2_TIMEOUT)
And two to the device itself:
SetFeature(U1_ENABLE)
SetFeature(U2_ENABLE)
The requests to the hub sets the inactivity timeout used by the hub to
know when to initiate U1 and U2 LPM link state transitions.
These requests are also used prevent U1/U2 LPM transitions completely
by passing zero timeout value.
The requsts sent to the device only controls if device is allowed to
initiate U1/U2 transitions. If not enabled then only hub initiates U1/U2
transitions. Hub may block these device initiated attempts.
Reorder and send the hub requests first, these are more likely to succeed
due to shorter path, and we can consider LPM disabled if these succeed
as U1/U2 link state can not be entered after that.
Fail immediately if a request fails, and don't try to enable back LPM
after a failed request, that will just send more LPM requests over a
bad link.
If a device request controlling device initiateed LPM fails then exit
immediately, but consider LPM disabled at this stage.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250314142000.93090-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When creating a device path in the driver the snprintf() takes
up to 16 characters long argument along with the additional up to
12 characters for the signed integer (as it can't see the actual limits)
and tries to pack this into 16 bytes array. GCC complains about that
when build with `make W=1`:
drivers/usb/core/usb.c:705:25: note: ‘snprintf’ output between 3 and 28 bytes into a destination of size 16
Since everything works until now, let's just check for the potential
buffer overflow and bail out. It is most likely a never happen situation,
but at least it makes GCC happy.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250321164949.423957-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This is a revert of
commit 2f964780c03b ("USB: core: replace %p with %pK").
When the formatting was changed from %p to %pK that was a security
improvement, as %p would leak raw pointer values to the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
On the other hand, restricted pointers ("%pK") were never meant to be used
through printk(). They can unintentionally still leak raw pointers or
acquire sleeping looks in atomic contexts.
Switch back to regular %p again.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250310-restricted-pointers-usb-v2-1-a7598e2d47d1@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolves the merge conflict with:
drivers/usb/typec/ucsi/ucsi_acpi.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usb_sndaddr0pipe macro is only used in the hub_set_address function.
Replace it with usb_sndctrlpipe which provides the same functionality
but would also consider the endpoint device number.
If the device has not been initialised, it is safe to use
usb_sndctrlpipe in this context because udev->devnum is set to 0.
Therefore, this change does not affect behaviour, but reduces code
complexity by reusing the existing macro.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250219083745.10406-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The xHC resources allocated for USB devices are not released in correct
order after resuming in case when while suspend device was reconnected.
This issue has been detected during the fallowing scenario:
- connect hub HS to root port
- connect LS/FS device to hub port
- wait for enumeration to finish
- force host to suspend
- reconnect hub attached to root port
- wake host
For this scenario during enumeration of USB LS/FS device the Cadence xHC
reports completion error code for xHC commands because the xHC resources
used for devices has not been properly released.
XHCI specification doesn't mention that device can be reset in any order
so, we should not treat this issue as Cadence xHC controller bug.
Similar as during disconnecting in this case the device resources should
be cleared starting form the last usb device in tree toward the root hub.
To fix this issue usbcore driver should call hcd->driver->reset_device
for all USB devices connected to hub which was reconnected while
suspending.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the 'eUSB2 Isochronous Endpoint Companion Descriptor'
introduced in the recent USB 2.0 specification 'USB 2.0 Double Isochronous
IN Bandwidth' ECN.
It allows embedded USB2 (eUSB2) devices to report and use higher bandwidths
for isochronous IN transfers in order to support higher camera resolutions
on the lid of laptops and tablets with minimal change to the USB2 protocol.
The motivation for expanding USB 2.0 is further clarified in an additional
Embedded USB2 version 2.0 (eUSB2v2) supplement to the USB 2.0
specification. It points out this is optimized for performance, power and
cost by using the USB 2.0 low-voltage, power efficient PHY and half-duplex
link for the asymmetric camera bandwidth needs, avoiding the costly and
complex full-duplex USB 3.x symmetric link and gigabit receivers.
eUSB2 devices that support the higher isochronous IN bandwidth and the new
descriptor can be identified by their device descriptor bcdUSB value of
0x0220
Co-developed-by: Amardeep Rai <amardeep.rai@intel.com>
Signed-off-by: Amardeep Rai <amardeep.rai@intel.com>
Signed-off-by: Kannappan R <r.kannappan@intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250220141339.1939448-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Teclast disk used on Huawei hisi platforms doesn't work well,
losing connectivity intermittently if LPM is enabled.
Add quirk disable LPM to resolve the issue.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When usb_control_msg is used in the get_bMaxPacketSize0 function, the
USB pipe does not include the endpoint device number. This can cause
failures when a usb hub port is reinitialized after encountering a bad
cable connection. As a result, the system logs the following error
messages:
usb usb2-port1: cannot reset (err = -32)
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: attempt power cycle
usb 2-1: new high-speed USB device number 5 using ci_hdrc
usb 2-1: device descriptor read/8, error -71
The problem began after commit 85d07c556216 ("USB: core: Unite old
scheme and new scheme descriptor reads"). There
usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike
usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the
macro usb_rcvaddr0pipe, which does not include the endpoint device
number. usb_get_device_descriptor, on the other hand, used the macro
usb_rcvctrlpipe, which includes the endpoint device number.
By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe
instead of usb_rcvaddr0pipe, the issue can be resolved. This change will
ensure that the endpoint device number is included in the USB pipe,
preventing reinitialization failures. If the endpoint has not set the
device number yet, it will still work because the device number is 0 in
udev.
Cc: stable <stable@kernel.org>
Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fastboot tool for communicating with Android bootloaders does not
work reliably with this device if USB 2 Link Power Management (LPM)
is enabled.
Various fastboot commands are affected, including the
following, which usually reproduces the problem within two tries:
fastboot getvar kernel
getvar:kernel FAILED (remote: 'GetVar Variable Not found')
This issue was hidden on many systems up until commit 63a1f8454962
("xhci: stored cached port capability values in one place") as the xhci
driver failed to detect USB 2 LPM support if USB 3 ports were listed
before USB 2 ports in the "supported protocol capabilities".
Adding the quirk resolves the issue. No drawbacks are expected since
the device uses different USB product IDs outside of fastboot mode, and
since fastboot commands worked before, until LPM was enabled on the
tested system by the aforementioned commit.
Based on a patch from Forest <forestix@nom.one> from which most of the
code and commit message is taken.
Cc: stable <stable@kernel.org>
Reported-by: Forest <forestix@nom.one>
Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net
Tested-by: Forest <forestix@nom.one>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Robert Morris created a test program which can cause
usb_hub_to_struct_hub() to dereference a NULL or inappropriate
pointer:
Oops: general protection fault, probably for non-canonical address
0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14
Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110
...
Call Trace:
<TASK>
? die_addr+0x31/0x80
? exc_general_protection+0x1b4/0x3c0
? asm_exc_general_protection+0x26/0x30
? usb_hub_adjust_deviceremovable+0x78/0x110
hub_probe+0x7c7/0xab0
usb_probe_interface+0x14b/0x350
really_probe+0xd0/0x2d0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x6e/0x110
driver_probe_device+0x1a/0x90
__device_attach_driver+0x7e/0xc0
bus_for_each_drv+0x7f/0xd0
__device_attach+0xaa/0x1a0
bus_probe_device+0x8b/0xa0
device_add+0x62e/0x810
usb_set_configuration+0x65d/0x990
usb_generic_driver_probe+0x4b/0x70
usb_probe_device+0x36/0xd0
The cause of this error is that the device has two interfaces, and the
hub driver binds to interface 1 instead of interface 0, which is where
usb_hub_to_struct_hub() looks.
We can prevent the problem from occurring by refusing to accept hub
devices that violate the USB spec by having more than one
configuration or interface.
Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
|
|
Merge ACPI battery and fan drivers updates and miscellaneous ACPI
chanages for 6.14:
- Update messages printed by the ACPI battery driver to always
refer to driver extensions as "hooks" to avoid confusion with
similar functionality in the power supply subsystem in the
future (Thomas Weißschuh).
- Fix .probe() error path cleanup in the ACPI fan driver to avoid
memory leaks (Joe Hattori).
- Constify 'struct bin_attribute' in some places in the ACPI subsystem
and mark it as __ro_after_init in one place to prevent binary blob
attributes from being updated (Thomas Weißschuh)
- Add empty stubs for several ACPI-related symbols so that they can be
used when CONFIG_ACPI is unset and use them for removing unnecessary
conditional compilation from the ipu-bridge driver (Ricardo Ribalda).
* acpi-battery:
ACPI: battery: Rename extensions to hook in messages
* acpi-fan:
ACPI: fan: cleanup resources in the error path of .probe()
* acpi-misc:
media: ipu-bridge: Remove unneeded conditional compilations
ACPI: bus: implement acpi_device_hid when !ACPI
ACPI: bus: implement for_each_acpi_consumer_dev when !ACPI
ACPI: header: implement acpi_device_handle when !ACPI
ACPI: bus: implement acpi_get_physical_device_location when !ACPI
ACPI: bus: implement for_each_acpi_dev_match when !ACPI
ACPI: bus: change the prototype for acpi_get_physical_device_location
ACPI: sysfs: Constify 'struct bin_attribute'
ACPI: BGRT: Constify 'struct bin_attribute'
ACPI: BGRT: Mark bin_attribute as __ro_after_init
|
|
GCC is not happy about the buffer size:
drivers/usb/core/hcd.c:441:48: error: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size between 35 and 99 [-Werror=format-truncation=]
441 | snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
| ^~
442 | init_utsname()->release, hcd->driver->description);
| ~~~~~~~~~~~~~~~~~~~~~~~
Bump the size to get it enough for the possible strings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250116160543.216913-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TOSHIBA TransMemory-Mx is a good performence flash device, but it
doesn't work well with LPM on Huawei hisi platform, so let's disable
LPM to resolve the issue.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Link: https://lore.kernel.org/r/20250113085619.44371-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-6-c8405df47c19@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use existing str_plural() helper from string_choices.h to reduce amount
of duplicated code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-1-c8405df47c19@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241222-sysfs-const-bin_attr-usb-v1-1-19a137c0f20a@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There's USB error when tegra board is shutting down:
[ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113
[ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113
[ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113
[ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead
[ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up
[ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3
LPM, port won't transit to U1/U2 when it's already suspended in U3,
hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang <waynec@nvidia.com>
Cc: stable <stable@kernel.org>
Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown")
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241206074817.89189-1-kaihengf@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When device_add(&udev->dev) succeeds and a later call fails,
usb_new_device() does not properly call device_del(). As comment of
device_add() says, 'if device_add() succeeds, you should call
device_del() when you want to get rid of it. If device_add() has not
succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 9f8b17e643fe ("USB: make usbdevices export their device nodes instead of using a separate class")
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241218071346.2973980-1-make_ruc2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_register_driver() uses complex goto statements to handle simple error
cases, move down the goto label 'out' a bit to
- Simplify goto logic
- Leverage pr_err() prompt for driver registering failure.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241212-fix_usb-v1-1-300eb440c753@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It generally is not OK to use acpi_status and/or AE_ error codes
without CONFIG_ACPI and they really only should be used in
drivers/acpi/ (and not everywhere in there for that matter).
So acpi_get_physical_device_location() needs to be redefined to return
something different from acpi_status (preferably bool) in order to be
used in !CONFIG_ACPI code.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20241216-fix-ipu-v5-1-3d6b35ddce7b@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before commit 53a2d95df836 ("usb: core: add phy notify connect and
disconnect"), phy initialization will be skipped even when shared hcd
doesn't set skip_phy_initialization flag. However, the situation is
changed after the commit. The hcd.c will initialize phy when add shared
hcd. This behavior is unexpected for some platforms which will handle phy
initialization by themselves. To avoid the issue, this will only check
skip_phy_initialization flag of primary hcd since shared hcd normally
follow primary hcd setting.
Fixes: 53a2d95df836 ("usb: core: add phy notify connect and disconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20241105090120.2438366-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wakes up
When a device is inserted into the USB port and an S4 wakeup is initiated,
after the USB-hub initialization is completed, it will automatically enter
suspend mode. Upon detecting a device on the USB port, it will proceed with
resume and set the hcd to the HCD_FLAG_WAKEUP_PENDING state. During the S4
wakeup process, peripherals are put into suspend mode, followed by task
recovery. However, upon detecting that the hcd is in the
HCD_FLAG_WAKEUP_PENDING state, it will return an EBUSY status, causing the
S4 suspend to fail and subsequent task recovery to not proceed.
-
[ 27.594598][ 1] PM: pci_pm_freeze(): hcd_pci_suspend+0x0/0x28 returns -16
[ 27.594601][ 1] PM: dpm_run_callback(): pci_pm_freeze+0x0/0x100 returns -16
[ 27.603420][ 1] ehci-pci 0000:00:04.1: pci_pm_freeze+0x0/0x100 returned 0 after 3 usecs
[ 27.612233][ 1] ehci-pci 0000:00:05.1: pci_pm_freeze+0x0/0x100 returned -16 after 17223 usecs
[ 27.810067][ 1] PM: Device 0000:00:05.1 failed to quiesce async: error -16
[ 27.816988][ 1] PM: quiesce of devices aborted after 1833.282 msecs
[ 27.823302][ 1] PM: start quiesce of devices aborted after 1839.975 msecs
......
[ 31.303172][ 1] PM: recover of devices complete after 3473.039 msecs
[ 31.309818][ 1] PM: Failed to load hibernation image, recovering.
[ 31.348188][ 1] PM: Basic memory bitmaps freed
[ 31.352686][ 1] OOM killer enabled.
[ 31.356232][ 1] Restarting tasks ... done.
[ 31.360609][ 1] PM: resume from hibernation failed (0)
[ 31.365800][ 1] PM: Hibernation image not present or could not be loaded.
The "do_wakeup" is determined based on whether the controller's
power/wakeup attribute is set. The current issue necessitates considering
the type of suspend that is occurring. If the suspend type is either
PM_EVENT_FREEZE or PM_EVENT_QUIESCE, then "do_wakeup" should be set to
false.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410151722.rfjtknRz-lkp@intel.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Duan Chenghao <duanchenghao@kylinos.cn>
Link: https://lore.kernel.org/r/20241024024038.26157-1-duanchenghao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
|
|
Turns out that we have some const pointers being passed to
to_usb_device_driver() but were not catching this. Change the macro to
properly propagate the const-ness of the pointer so that we will notice
when we try to write to memory that we shouldn't be writing to.
This requires fixing up the usb_driver_applicable() function as well,
because it can handle a const * to struct usb_driver.
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2024111342-lagoon-reapprove-5e49@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Turns out that we have some const pointers being passed to
to_usb_driver() but were not catching this. Change the macro to
properly propagate the const-ness of the pointer so that we will notice
when we try to write to memory that we shouldn't be writing to.
This requires fixing up the usb_match_dynamic_id() function as well,
because it can handle a const * to struct usb_driver.
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2024111339-shaky-goldsmith-b233@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When walking the list of dynamic ids for a driver, no lock was being
held, which meant that an id could be removed or added while the list
was being iterated. Fix this up by properly grabing the lock while we
walk the list.
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2024111324-tubby-facecloth-d4a0@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are a number of places where we accidentally pass in a constant
structure to later cast it off to a dynamic one, and then attempt to
grab a lock on it, which is not a good idea. To help resolve this, move
the dynamic id lock out of the dynamic id structure for the driver and
into one single lock for all USB dynamic ids. As this lock should never
have any real contention (it's only every accessed when a device is
added or removed, which is always serialized) there should not be any
difference except for some memory savings.
Note, this just converts the existing use of the dynamic id lock to the
new static lock, there is one place that is accessing the dynamic id
list without grabbing the lock, that will be fixed up in a follow-on
change.
Cc: Johan Hovold <johan@kernel.org>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Grant Grundler <grundler@chromium.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/2024111322-kindly-finalist-d247@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ensure type safety by using max_t() instead of max().
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20241112155817.3512577-3-snovitoll@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since len1 is unsigned int, len1 < 0 always false. Remove it keep code
simple.
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Rule: add
Link: https://lore.kernel.org/stable/20241108094255.2133-1-rex.nie%40jaguarmicro.com
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241112152021.2236-1-rex.nie@jaguarmicro.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The is_bin_visible() callbacks should not modify the struct
bin_attribute passed as argument.
Enforce this by marking the argument as const.
As there are not many callback implementers perform this change
throughout the tree at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-5-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well, and this resolves a merge
conflict in:
drivers/usb/typec/tcpm/tcpm.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20241101150730.090dc30f@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
