| Age | Commit message (Collapse) | Author |
|---|
|
If "sinfo->config" is not found, then return -ENODEV. Don't
return success.
Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The "edid" struct member is only used during probe() and it's freed
right away. There is no point in storing a freed pointer for the
whole life of the driver.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use swap() in order to make code cleaner. Issue found by coccinelle.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Do a sanity check on pixclock value to avoid divide by zero.
If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.
Syzkaller reported a divide error in cirrusfb_check_pixclock.
divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260
Call Trace:
fb_set_var+0x398/0xf90
do_fb_ioctl+0x4b8/0x6f0
fb_ioctl+0xeb/0x130
__x64_sys_ioctl+0x19d/0x220
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Variable Ftarget is being initialized with a value that is never read,
it is being re-assigned a different value a little later on. The
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There are a couple of statements where local variables are being assigned
values that are never read because the function returns immediately after
the assignment. Clean up the code by removing them.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
replace dma_mmap_attrs() with dma_mmap_coherent() kindly.
BTW, fix indentation.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Coverity complains of a possible buffer overflow. However,
given the 'static' scope of nvidia_setup_i2c_bus() it looks
like that can't happen after examiniing the call sites.
CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string
chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the
source argument is a parameter of the current function.
89 strcpy(chan->adapter.name, name);
Fix this warning by using strscpy() which will silence the warning and
prevent any future buffer overflows should the names used to identify the
channel become much longer.
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There is a spelling mistake in a debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:fb_destroy_modelist+0x38/0x100
...
Call Trace:
ufx_usb_probe.cold+0x2b5/0xac1 [smscufx]
usb_probe_interface+0x1aa/0x3c0 [usbcore]
really_probe+0x167/0x460
...
ret_from_fork+0x1f/0x30
If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will
be called to destroy modelist in the error handling path. But modelist
has not been initialized yet, so it will result in null-ptr-deref.
Initialize modelist before calling fb_alloc_cmap() to fix this bug.
Fixes: 3c8a63e22a08 ("Add support for SMSC UFX6000/7000 USB display adapters")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If PPC_BOOK3S, PPC_PMAC and PPC32 is n, COMPILE_TEST build fails:
drivers/video/fbdev/controlfb.c:70:0: error: "pgprot_cached_wthru" redefined [-Werror]
#define pgprot_cached_wthru(prot) (prot)
In file included from ./arch/powerpc/include/asm/pgtable.h:20:0,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:33,
from drivers/video/fbdev/controlfb.c:37:
./arch/powerpc/include/asm/nohash/pgtable.h:243:0: note: this is the location of the previous definition
#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
struct of_device_id should normally be const.
Signed-off-by: Chunyang Zhong <zhongchunyang@cdjrlc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
avoid black screen
Start from commit 11be60bd66d54 "matroxfb: add Matrox MGA-G200eW board
support", when maxvram is 0x800000, monitor become black w/ error message
said: "The current input timing is not supported by the monitor display.
Please change your input timing to 1920x1080@60Hz ...".
Fixes: 11be60bd66d5 ("matroxfb: add Matrox MGA-G200eW board support")
Signed-off-by: Z. Liu <liuzx@knownsec.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The pointer ptr is being assigned a value that is never read. The
pointer is being re-assigned later in a loop. The assignment is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
PM6150L contains WLED of version 5. Add support ofr it to the driver.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Return value from aty_ld_8() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the omapfb sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: linux-omap@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The return value of platform_get_resource() needs to be checked.
To avoid use of error pointer in case that there is no suitable resource.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Don't populate some read-only arrays on the stack but instead
make them static const. Also makes the object code a little smaller.
Re-format one of the declarations. Add spaces between commas and make
PostDivSet unsigned int to fixup checkpatch warnings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Requesting the framebuffer memory in simpledrm marks the memory
range as busy. This used to be done by the firmware sysfb code,
but the driver is the correct place.
v2:
* store memory region in struct for later cleanup (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-5-tzimmermann@suse.de
|
|
Hot-unplug all firmware-framebuffer devices as part of removing
them via remove_conflicting_framebuffers() et al. Releases all
memory regions to be acquired by native drivers.
Firmware, such as EFI, install a framebuffer while posting the
computer. After removing the firmware-framebuffer device from fbdev,
a native driver takes over the hardware and the firmware framebuffer
becomes invalid.
Firmware-framebuffer drivers, specifically simplefb, don't release
their device from Linux' device hierarchy. It still owns the firmware
framebuffer and blocks the native drivers from loading. This has been
observed in the vmwgfx driver. [1]
Initiating a device removal (i.e., hot unplug) as part of
remove_conflicting_framebuffers() removes the underlying device and
returns the memory range to the system.
[1] https://lore.kernel.org/dri-devel/20220117180359.18114-1-zack@kde.org/
v2:
* rename variable 'dev' to 'device' (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@vger.kernel.org # v5.11+
Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-2-tzimmermann@suse.de
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the omapfb sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: linux-omap@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20220106094906.3272287-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the WIN10 version of the Synthetic Video protocol with Hyper-V,
Hyper-V reports a list of supported resolutions as part of the protocol
negotiation. The driver calculates the maximum width and height from
the list of resolutions, and uses those maximums to validate any screen
resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of
supported resolutions could contain 1600x1200 and 1920x1080, both of
which fit in an 8 Mbyte frame buffer. But calculating the max width
and height yields 1920 and 1200, and 1920x1200 resolution does not fit
in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted,
causing a kernel fault when the driver accesses memory outside the
frame buffer.
Instead, validate the specified screen resolution by calculating
its size, and comparing against the frame buffer size. Delete the
code for calculating the max width and height from the list of
resolutions, since these max values have no use. Also add the
frame buffer size to the info message to aid in understanding why
a resolution might be rejected.
Fixes: 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/1642360711-2335-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Pull drm fixes from Daniel Vetter:
"drivers fixes:
- i915 fixes for ttm backend + one pm wakelock fix
- amdgpu fixes, fairly big pile of small things all over. Note this
doesn't yet containe the fixed version of the otg sync patch that
blew up
- small driver fixes: meson, sun4i, vga16fb probe fix
drm core fixes:
- cma-buf heap locking
- ttm compilation
- self refresh helper state check
- wrong error message in atomic helpers
- mipi-dbi buffer mapping"
* tag 'drm-next-2022-01-14' of git://anongit.freedesktop.org/drm/drm: (49 commits)
drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy
drm: fix error found in some cases after the patch d1af5cd86997
drm/ttm: fix compilation on ARCH=um
dma-buf: cma_heap: Fix mutex locking section
video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
drm/amdkfd: Fix ASIC name typos
drm/amdkfd: Fix DQM asserts on Hawaii
drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2
drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)
drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interrupt
drm/amdgpu: not return error on the init_apu_flags
drm/amdkfd: Use prange->update_list head for remove_list
drm/amdkfd: Use prange->list head for insert_list
drm/amdkfd: make SPDX License expression more sound
drm/amdkfd: Check for null pointer after calling kmemdup
drm/amd/display: invalid parameter check in dmub_hpd_callback
Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"
drm/amd/display: reset dcn31 SMU mailbox on failures
drm/amdkfd: use default_groups in kobj_type
drm/amdgpu: use default_groups in kobj_type
...
|
|
Pointer bufs is being initialized with a value that is never read, it
is being re-assigned with a different value later on. The assignment
is redundant and can be removed. Cleans up clang-scan warning:
drivers/video/fbdev/s3c-fb.c:492:16: warning: Value stored to 'buf'
during its initialization is never read [deadcode.DeadStores]
void __iomem *buf = regs;
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230160626.404072-1-colin.i.king@gmail.com
|
|
Variable Ftarget is being initialized with a value that is never read,
it is being re-assigned a different value a little later on. The
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230155202.355336-1-colin.i.king@gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Two DT bindings fixes for meson, a device refcounting fix for sun4i, a
probe fix for vga16fb, a locking fix for the CMA dma-buf heap and a
compilation fix for ttm.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: I made sure I have exactly the same conflict resolution as
Linus in 8d0749b4f83b ("Merge tag 'drm-next-2022-01-07' of
git://anongit.freedesktop.org/drm/drm") to avoid further conflict fun.
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114125454.zs46ny52lrxk3ljz@houat
|
|
The vga16fb framebuffer driver supports both Enhanced Graphics Adapter
(EGA) and Video Graphics Array (VGA) 16 color graphic cards.
But the logic to check whether the EGA or VGA standard are used is not
correct. It just checks if screen_info.orig_video_isVGA is set, but it
should check if is set to VIDEO_TYPE_VGAC instead.
This means that it assumes to be VGA even if is set to VIDEO_TYPE_EGAC.
All non-x86 architectures though treat orig_video_isVGA as a boolean so
only do the change for x86 and keep the old logic for the other arches.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Kris Karas <bugs-a21@moonlit-rail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095625.278836-2-javierm@redhat.com
|
|
The vga16fb framebuffer driver only supports Enhanced Graphics Adapter
(EGA) and Video Graphics Array (VGA) 16 color graphic cards.
But it doesn't check if the adapter is one of those or if a VGA16 mode
is used. This means that the driver will be probed even if a VESA BIOS
Extensions (VBE) or Graphics Output Protocol (GOP) interface is used.
This issue has been present for a long time but it was only exposed by
commit d391c5827107 ("drivers/firmware: move x86 Generic System
Framebuffers support") since the platform device registration to match
the {vesa,efi}fb drivers is done later as a consequence of that change.
All non-x86 architectures though treat orig_video_isVGA as a boolean so
only do the supported video mode check for x86 and not for other arches.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215001
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Kris Karas <bugs-a21@moonlit-rail.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Kris Karas <bugs-a21@moonlit-rail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095625.278836-3-javierm@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Prepare and add support for ACPI enumeration; lp855x_bl
Fix-ups:
- Use Regmap API to conduct endianess conversions; qcom-wled
- Remove superfluous code; qcom-wled
- Fix formatting issues; qcom-wled
Bug Fixes:
- Provide error checking/validation of DT supplied strings; qcom-wled
- Request dynamic amount of values when reading from DT; qcom-wled
- Fix off-by-one issue when reading from DT; qcom-wled"
* tag 'backlight-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: qcom-wled: Respect enabled-strings in set_brightness
backlight: qcom-wled: Remove unnecessary double whitespace
backlight: qcom-wled: Provide enabled_strings default for WLED 4 and 5
backlight: qcom-wled: Remove unnecessary 4th default string in WLED3
backlight: qcom-wled: Override default length with qcom,enabled-strings
backlight: qcom-wled: Fix off-by-one maximum with default num_strings
backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion
backlight: qcom-wled: Pass number of elements to read to read_u32_array
backlight: qcom-wled: Validate enabled string indices in DT
backlight: lp855x: Add support ACPI enumeration
backlight: lp855x: Add dev helper variable to lp855x_probe()
backlight: lp855x: Move device_config setting out of lp855x_configure()
|
|
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
|
|
Add a function for drivers to check if the a firmware initialized
fb is corresponds to their aperture. This allows drivers to check if the
device corresponds to what the firmware set up as the display device.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The hardware is capable of controlling any non-contiguous sequence of
LEDs specified in the DT using qcom,enabled-strings as u32
array, and this also follows from the DT-bindings documentation. The
numbers specified in this array represent indices of the LED strings
that are to be enabled and disabled.
Its value is appropriately used to setup and enable string modules, but
completely disregarded in the set_brightness paths which only iterate
over the number of strings linearly.
Take an example where only string 2 is enabled with
qcom,enabled_strings=<2>: this string is appropriately enabled but
subsequent brightness changes would have only touched the zero'th
brightness register because num_strings is 1 here. This is simply
addressed by looking up the string for this index in the enabled_strings
array just like the other codepaths that iterate over num_strings.
Likewise enabled_strings is now also used in the autodetection path for
consistent behaviour: when a list of strings is specified in DT only
those strings will be probed for autodetection, analogous to how the
number of strings that need to be probed is already bound by
qcom,num-strings. After all autodetection uses the set_brightness
helpers to set an initial value, which could otherwise end up changing
brightness on a different set of strings.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Fixes: 03b2b5e86986 ("backlight: qcom-wled: Add support for WLED4 peripheral")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-10-marijn.suijten@somainline.org
|
|
Remove redundant spaces inside for loop conditions. No other double
spaces were found that are not part of indentation with `[^\s] `.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-9-marijn.suijten@somainline.org
|
