| Age | Commit message (Collapse) | Author |
|---|
|
Get rid of the GIF_ALLOC_FAILED flag; we can now be confident that the
additional consistency check isn't needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Currently, sdp->sd_aspace and the per-inode metadata address spaces use
sb->s_bdev->bd_mapping->host as their ->host; folios in those address
spaces will thus appear to be on bdev rather than on gfs2 filesystems.
This is a problem because gfs2 doesn't support cgroup writeback
(SB_I_CGROUPWB), but bdev does.
Fix that by using a "dummy" gfs2 inode as ->host in those address
spaces. When coming from a folio, folio->mapping->host->i_sb will then
be a gfs2 super block and the SB_I_CGROUPWB flag will not be set in
sb->s_iflags.
Based on a previous version from Bob Peterson from several years ago.
Thanks to Tetsuo Handa, Jan Kara, and Rafael Aquini for helping figure
this out.
Fixes: aaa2cacf8184 ("writeback: add lockdep annotation to inode_to_wb()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In gfs2_glock_dq(), we must drop the glock spin lock before calling
->lm_cancel, but this means that in the meantime, the operation we are
trying to cancel could complete. If the operation completes
unsuccessfully, another holder can end up at the head of the queue and
another ->lm_lock operation can get started. In this case, we would end
up canceling that second operation by accident.
To prevent that, introduce a new GLF_CANCELING flag. Set that flag in
gfs2_glock_dq() when trying to cancel an operation. When seeing that
flag, finish_xmote() will then keep the GLF_LOCK flag set to prevent
other glock operations from taking place. gfs2_glock_dq() then
completes the cancelation attempt by clearing GLF_LOCK and
GLF_CANCELING.
In addition, add a missing GLF_DEMOTE_IN_PROGRESS check in
gfs2_glock_dq() to make sure that we won't accidentally cancel a demote
request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Having this flag attached to the iopen glock instead of the inode is
much simpler; it eliminates a protential weird race in gfs2_try_evict().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Introduce a new GLF_PENDING_REPLY flag to indicate that a reply from DLM
is expected. Include that flag in glock dumps to show more clearly
what's going on. (When the GLF_PENDING_REPLY flag is set, the GLF_LOCK
flag will also be set but the GLF_LOCK flag alone isn't sufficient to
tell that we are waiting for a DLM reply.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The GIF_DEFERRED_DELETE flag indicates an action that gfs2_evict_inode()
should take, so rename the flag to GIF_DEFER_DELETE to clarify.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rename the GLF_VERIFY_EVICT flag to GLF_VERIFY_DELETE: that flag
indicates that we want to delete an inode / verify that it has been
deleted.
To match, rename gfs2_queue_verify_evict() to
gfs2_queue_verify_delete().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
With the locking the previous patch has introduced for each struct
gfs2_quota_data object, sd_quota_mutex has become largely irrelevant.
By waiting on the buffer head instead of waiting on the mutex in
get_bh(), it becomes completely irrelevant and can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The demote_ok glock operation is only still used to prevent the inode
glocks of the "jindex" and "rindex" directories from getting recycled
while they are still referenced by sdp->sd_jindex and sdp->sd_rindex.
However, the LRU walking code will no longer recycle glocks which are
referenced, so the demote_ok glock operation is obsolete and can be
removed.
Each of a glock's holders in the gl_holders list is holding a reference
on the glock, so when the list of holders isn't empty in demote_ok(),
the existing reference count check will already prevent the glock from
getting released. This means that demote_ok() is obsolete as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This reverts commit e7ccaf5fe1590667b3fa2f8df5c5ec9ba0dc5b85.
Before commit e7ccaf5fe159, every time a resource group glock was
dequeued by gfs2_glock_dq(), it was added to the glock LRU list even
though the glock was still referenced by the resource group and could
never be evicted, anyway. Commit e7ccaf5fe159 added a GLOF_LRU hack to
avoid that overhead for resource group glocks, and that hack was since
adopted for some other types of glocks as well.
We now no longer add glocks to the glock LRU list while they are still
referenced. This solves the underlying problem, and obsoletes the
GLOF_LRU hack.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
(cherry picked from commit 3e5257c810cba91e274d07f3db5cf013c7c830be)
|
|
Switch to a per-filesystem glock workqueue. Additional workqueues are
cheap nowadays, and keeping separate workqueues allows to flush the work
of each filesystem without affecting the others.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The GLF_FROZEN flag indicates that a reply to a DLM locking request has
been received, but should not be processed at this time. To clarify
that meaning, rename the flag to GLF_HAVE_FROZEN_REPLY.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The GLF_REPLY_PENDING flag indicates to glock_work_func() that in
response to a locking request, DLM has sent a reply that needs to be
processed. A flag with that name could as well indicate that we are
waiting on a reply from DLM, however. To disambiguate these two cases,
rename the flag to GLF_HAVE_REPLY.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rename the GLF_FREEING flag to GLF_UNLOCKED, and the ->go_free glock
operation to ->go_unlocked. This mechanism is used to wait for the
underlying DLM lock to be unlocked; being able to free the glock is a
consequence of the DLM lock being unlocked.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When a DLM lockspace is released and there ares still locks in that
lockspace, DLM will unlock those locks automatically. Commit
fb6791d100d1b started exploiting this behavior to speed up filesystem
unmount: gfs2 would simply free glocks it didn't want to unlock and then
release the lockspace. This didn't take the bast callbacks for
asynchronous lock contention notifications into account, which remain
active until until a lock is unlocked or its lockspace is released.
To prevent those callbacks from accessing deallocated objects, put the
glocks that should not be unlocked on the sd_dead_glocks list, release
the lockspace, and only then free those glocks.
As an additional measure, ignore unexpected ast and bast callbacks if
the receiving glock is dead.
Fixes: fb6791d100d1b ("GFS2: skip dlm_unlock calls in unmount")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Teigland <teigland@redhat.com>
|
|
For non-static function declarations, external linkage is implied and
the 'extern' keyword isn't needed. Some static checkers complain about
the overuse of 'extern', so clean up all the function declarations.
In addition, remove 'extern' from the definition of
free_local_statfs_inodes(); it isn't needed there, either.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Variable qd_slot_count is a reference count, not a count of slots. This
patch renames it to qd_slot_ref to make that more clear.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch adds a new mount option quota=quiet which is the same as
quota=on but it suppresses gfs2 quota error messages.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rename the SDF_DEACTIVATING flag to SDF_KILL to make it more obvious
that this relates to the kill_sb filesystem operation.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rename sd_glock_wait to sd_kill_wait: we'll use it for other things
related to "killing" a filesystem on unmount soon (kill_sb).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Commit 27a2660f1ef9 ("gfs2: Dump nrpages for inodes and their glocks")
added some locking around reading inode->i_data.nrpages. That locking
doesn't do anything really, so get rid of it.
With that, the glock argument to ->go_dump() can be made const again as
well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Replace sd_freeze_state with a new SDF_FROZEN flag.
There no longer is a need for indicating that a freeze is in progress
(SDF_STARTING_FREEZE); we are now protecting the critical sections with
the sd_freeze_mutex.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Rename the SDF_FS_FROZEN flag to SDF_FREEZE_INITIATOR to indicate more
clearly that the node that has this flag set is the initiator of the
freeze.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com
|
|
Add a gfs2_evict_inodes() helper that evicts inodes cooperatively across
the cluster. This avoids running into timeouts during unmount
unnecessarily.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add a new SDF_DEACTIVATING super block flag that is set when the
filesystem has started to deactivate. This will be used in the next
patch to stop and drain the delete work during unmount.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function delete_work_func() is used for two purposes:
* to immediately try to evict the glock's inode, and
* to verify after a little while that the inode has been deleted as
expected, and didn't just get skipped.
These two operations are not separated very well, so introduce two new
glock flags to improved that. Split gfs2_queue_delete_work() into
gfs2_queue_try_to_evict and gfs2_queue_verify_evict().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Move the global delete workqueue into struct gfs2_sbd so that we can
flush / drain it without interfering with other filesystems.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Get rid of the GLF_PENDING_DELETE glock flag introduced by commit
a0e3cc65fa29 ("gfs2: Turn gl_delete into a delayed work"). The only use
of that flag is to prevent the iopen glock from being demoted (i.e.,
unlocked) while delete work is pending. It turns out that demoting the
iopen glock while delete work is pending is perfectly fine; we only need
to make sure that the glock isn't being freed while still in use. This
is ensured by the previous patch because delete_work_func() owns a
reference while the work is queued or running.
With these changes, gfs2_queue_delete_work() no longer takes the glock
spin lock, so we can use it in iopen_go_callback() instead of
open-coding it there.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Remove the support for glock holder auto-demotion (commit dc732906c245
and folow-ups) as we are not planning to use this feature, and the
additional code therefore only adds unnecessary complexity.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Make go_instantiate take a glock instead of a glock holder as its argument:
this handler is supposed to instantiate the object associated with the glock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Right now, inode_go_instantiate() contains functionality that relates to
how a glock is held rather than the glock itself, like waiting for
pending direct I/O to complete and completing interrupted truncates.
This code is meant to be run each time a holder is acquired, but
go_instantiate is actually only called once, when the glock is
instantiated.
To fix that, introduce a new go_held glock operation that is called each
time a glock holder is acquired. Move the holder specific code in
inode_go_instantiate() over to inode_go_held().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Now that interrupted truncates are completed in the context of the
process taking the glock, there is no need for the glock state engine to
delegate that task to gfs2_quotad or for quotad to perform those
truncates anymore. Get rid of the obsolete associated infrastructure.
Reverts commit 813e0c46c9e2 ("GFS2: Fix "truncate in progress" hang").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
The new GLF_INSTANTIATE_NEEDED flag obsoletes the old rgrp flag
GFS2_RDF_UPTODATE, so this patch replaces it like we did with inodes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
With the addition of the new GLF_INSTANTIATE_NEEDED flag, the
GIF_INVALID flag is now redundant. This patch removes it.
Since inode_instantiate is only called when instantiation is needed,
the check in inode_instantiate is removed too.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, when a glock was locked, the very first holder on the
queue would unlock the lockref and call the go_instantiate glops function
(if one existed), unless GL_SKIP was specified. When we introduced the new
node-scope concept, we allowed multiple holders to lock glocks in EX mode
and share the lock.
But node-scope introduced a new problem: if the first holder has GL_SKIP
and the next one does NOT, since it is not the first holder on the queue,
the go_instantiate op was not called. Eventually the GL_SKIP holder may
call the instantiate sub-function (e.g. gfs2_rgrp_bh_get) but there was
still a window of time in which another non-GL_SKIP holder assumes the
instantiate function had been called by the first holder. In the case of
rgrp glocks, this led to a NULL pointer dereference on the buffer_heads.
This patch tries to fix the problem by introducing two new glock flags:
GLF_INSTANTIATE_NEEDED, which keeps track of when the instantiate function
needs to be called to "fill in" or "read in" the object before it is
referenced.
GLF_INSTANTIATE_IN_PROG which is used to determine when a process is
in the process of reading in the object. Whenever a function needs to
reference the object, it checks the GLF_INSTANTIATE_NEEDED flag, and if
set, it sets GLF_INSTANTIATE_IN_PROG and calls the glops "go_instantiate"
function.
As before, the gl_lockref spin_lock is unlocked during the IO operation,
which may take a relatively long amount of time to complete. While
unlocked, if another process determines go_instantiate is still needed,
it sees GLF_INSTANTIATE_IN_PROG is set, and waits for the go_instantiate
glop operation to be completed. Once GLF_INSTANTIATE_IN_PROG is cleared,
it needs to check GLF_INSTANTIATE_NEEDED again because the other process's
go_instantiate operation may not have been successful.
Functions that previously called the instantiate sub-functions now call
directly into gfs2_instantiate so the new bits are managed properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, the go_lock glock operations (glops) did not do
any actual locking. They were used to instantiate objects, like reading
in dinodes and rgrps from the media.
This patch renames the functions to go_instantiate for clarity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Now that gfs2_file_buffered_write is the only remaining user of
ip->i_gh, we can move the glock holder to the stack (or rather, use the
one we already have on the stack); there is no need for keeping the
holder in the inode anymore.
This is slightly complicated by the fact that we're using ip->i_gh for
the statfs inode in gfs2_file_buffered_write as well. Writing to the
statfs inode isn't very common, so allocate the statfs holder
dynamically when needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch introduces a new HIF_MAY_DEMOTE flag and infrastructure that
will allow glocks to be demoted automatically on locking conflicts.
When a locking request comes in that isn't compatible with the locking
state of an active holder and that holder has the HIF_MAY_DEMOTE flag
set, the holder will be demoted before the incoming locking request is
granted.
Note that this mechanism demotes active holders (with the HIF_HOLDER
flag set), while before we were only demoting glocks without any active
holders. This allows processes to keep hold of locks that may form a
cyclic locking dependency; the core glock logic will then break those
dependencies in case a conflicting locking request occurs. We'll use
this to avoid giving up the inode glock proactively before faulting in
pages.
Processes that allow a glock holder to be taken away indicate this by
calling gfs2_holder_allow_demote(), which sets the HIF_MAY_DEMOTE flag.
Later, they call gfs2_holder_disallow_demote() to clear the flag again,
and then they check if their holder is still queued: if it is, they are
still holding the glock; if it isn't, they can re-acquire the glock (or
abort).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Holder flag HIF_FIRST is no longer used or needed, so remove it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, several functions in gfs2 related to the updating
of the statfs file used a newly acquired/read buffer_head for the
local statfs file. This is completely unnecessary, because other nodes
should never update it. Recreating the buffer is a waste of time.
This patch allows gfs2 to read in the local statefs buffer_head at
mount time and keep it around until unmount time.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The only glock that uses go_xmote_bh glops function is the freeze glock
which uses freeze_go_xmote_bh. It does not use its gh parameter, so
this patch eliminates the unneeded parameter.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git
Merge the resource group glock sharing feature and the revoke accounting rework.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
In the log, revokes are stored as a revoke descriptor (struct
gfs2_log_descriptor), followed by zero or more additional revoke blocks
(struct gfs2_meta_header). On filesystems with a blocksize of 4k, the
revoke descriptor contains up to 503 revokes, and the metadata blocks
contain up to 509 revokes each. We've so far been reserving space for
revokes in transactions in block granularity, so a lot more space than
necessary was being allocated and then released again.
This patch switches to assigning revokes to transactions individually
instead. Initially, space for the revoke descriptor is reserved and
handed out to transactions. When more revokes than that are reserved,
additional revoke blocks are added. When the log is flushed, the space
for the additional revoke blocks is released, but we keep the space for
the revoke descriptor block allocated.
Transactions may still reserve more revokes than they will actually need
in the end, but now we won't overshoot the target as much, and by only
returning the space for excess revokes at log flush time, we further
reduce the amount of contention between processes.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Prepare for treating resource group glocks as exclusive among nodes but
shared among all tasks running on a node: introduce another layer of
node-specific locking that the local tasks can use to coordinate their
accesses.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add a rs_reserved field to struct gfs2_blkreserv to keep track of the number of
blocks reserved by this particular reservation, and a rd_reserved field to
struct gfs2_rgrpd to keep track of the total number of reserved blocks in the
resource group. Those blocks are exclusively reserved, as opposed to the
rs_requested / rd_requested blocks which are tracked in the reservation tree
(rd_rstree) and which can be stolen if necessary.
When making a reservation with gfs2_inplace_reserve, rs_reserved is set to
somewhere between ap->min_target and ap->target depending on the number of free
blocks in the resource group. When allocating blocks with gfs2_alloc_blocks,
rs_reserved is decremented accordingly. Eventually, any reserved but not
consumed blocks are returned to the resource group by gfs2_inplace_release.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
We keep track of what we've so far been referring to as reservations in
rd_rstree: the nodes in that tree indicate where in a resource group we'd
like to allocate the next couple of blocks for a particular inode. Local
processes take those as hints, but they may still "steal" blocks from those
extents, so when actually allocating a block, we must double check in the
bitmap whether that block is actually still free. Likewise, other cluster
nodes may "steal" such blocks as well.
One of the following patches introduces resource group glock sharing, i.e.,
sharing of an exclusively locked resource group glock among local processes to
speed up allocations. To make that work, we'll need to keep track of how many
blocks we've actually reserved for each inode, so we end up with two different
kinds of reservations.
Distinguish these two kinds by referring to blocks which are reserved but may
still be "stolen" as "requested". This rename also makes it more obvious that
rs_requested and rd_requested are strongly related.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Turn on rgrplvb by default for sb_fs_format > 1801.
Mount options still have to override this so a new args field to
differentiate between 'off' and 'not specified' is added, and the new
default is applied only when it's not specified.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Keep the current value of the updated log tail in the super block as
sb_log_flush_tail instead of computing it on the fly. This avoids
unnecessary sd_ail_lock taking and cleans up the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This counter and the associated wait queue are only used so that
gfs2_make_fs_ro can efficiently wait for all pending log space
allocations to fail after setting the filesystem to read-only. This
comes at the cost of waking up that wait queue very frequently.
Instead, when gfs2_log_reserve fails because the filesystem has become
read-only, Wake up sd_log_waitq. In gfs2_make_fs_ro, set the file
system read-only and then wait until all the log space has been
released. Give up and report the problem after a while. With that,
sd_reserving_log and sd_reserving_log_wait can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
