| Age | Commit message (Collapse) | Author |
|---|
|
Move the include linux/debugfs.h into tas2781.h for code clean.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250612044252.1025-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
|
|
SPI and I2C into the tas2781_hda lib
Calibration data getting function for SPI and I2C HDA drivers are almost
same, which read the calibration data from UEFI. To put them into
tas2781_hda lib for code cleanup is more reasonable than to still keep
them in the codec driver. For tas2781 codec driver, there're two different
sources for calibrated data, one is from bin file, generated in factory
test, requested and read in codec driver side; the other is from user
space during device bootup.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250522014347.1163-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"Acoustic Tuning" debugfs node is a bridge to the acoustic tuning tool
which can tune the chips' acoustic effect.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250507094616.210-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_TAS2781_FMWLIB
Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for
firmware parsing, only differece is the register reading, bit update and
book switching in i2c and spi. The main purpose of this patch is for code
cleaup and arrange the shared part for i2c and spi.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250429111055.567-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.15
This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.
- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,
Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.
|
|
For calibration, basic version does not contain any calibration addresses,
it depends on calibration tool to convey the addresses to the driver.
Since Alpha and Beta firmware, all the calibration addresses are saved
into the firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
|
|
Do some clean up for some define in header file.
Like change lower case in value, up case in define,
space add in recommends, change date of files and add author.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250226144328.11645-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use %ptTsr instead of open-coded variant to print contents of time64_t type
in human readable form.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250206192537.1133763-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add speaker id check by gpio in ACPI for ASUS projects.
In other vendors, speaker id was checked by BIOS, and was applied in
last bit of subsys id, so we can load corresponding firmware binary file
for its speaker by subsys id.
But in ASUS project, the firmware binary name will be appended an extra
number to tell the speakers from different vendors. And this single digit
come from gpio level of speaker id in BIOS.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241123073718.475-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add calibration related kcontrol for speaker impedance calibration and
speaker leakage check for Chromebook.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240911232739.1509-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-1-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Requriment from customer to add new kcontrol to set tas2563 digital
Volume
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240710064238.1480-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the tas2781_reset as tasdevice_reset in case of misunderstanding.
RESET register for both tas2563 and tas2781 is same and the use of reset
pin is also same.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240709043342.946-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
to support corresponding TAS2563/TAS2781s
Add name_prefix as the prefix name of firmwares and
kcontrol to support corresponding TAS2563/TAS2781s.
name_prefix is not mandatory.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240621132309.564-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:
SKL <- APL <- CNL <- ICL <- TGL
rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.
Layout of the patchset:
First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.
Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.
The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
|
|
The acpi_subysystem_id is only written and freed, not read, so
unnecessary.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/454639336be28d2b50343e9c8366a56b0975e31d.1707456753.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
|
|
Move tas2563 from tas2562 header file to tas2781 header file to unbind
tas2563 from tas2562 driver code and bind it to tas2781 driver code,
because tas2563 only work in bypass-DSP mode with tas2562 driver. In
order to enable DSP mode for tas2563, it has been moved to tas2781
driver. As to the hardware part, such as register setting and DSP
firmware, all these are stored in the binary firmware. What tas2781
drivder does is to parse the firmware and download it to the chip,
then power on the chip. So, tas2781 driver can be resued as tas2563
driver. Only attention will be paid to downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7
laptop. It has two TAS2563 amplifier. Add the PNP ID
and calibration functions to handle them.
ACPI excerpt:
Scope (_SB.I2CD)
{
Device (TAS)
{
Name (_HID, "INT8866") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0020
}
})
Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3b8d4c602e1a46922f53bc9afc8b705d55aa4872.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make the global i2c address configurable to support compatible amplifiers
with different global i2c address.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/a252f1efeed5049f027f01e699c9e10e1e05bf9e.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make calibration functions configurable to support different calibration
data storage modes.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Create Header file for tas2781 driver.
Signed-off-by: Shenghao Ding <13916275206@139.com>
Link: https://lore.kernel.org/r/20230618122819.23143-1-13916275206@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
