| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc7).
Conflicts:
Documentation/netlink/specs/ovpn.yaml
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
af52020fc599 ("ovpn: reject unexpected netlink attributes")
drivers/net/phy/phy_device.c
a44312d58e78 ("net: phy: Don't register LEDs for genphy")
f0f2b992d818 ("net: phy: Don't register LEDs for genphy")
https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org
drivers/net/wireless/intel/iwlwifi/fw/regulatory.c
drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap")
ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware")
net/ipv6/mcast.c
ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()")
a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()")
https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit cff5f49d433fcd0063c8be7dd08fa5bf190c6c37.
Commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not
frozen") modified the cgroup_freezing() logic to verify that the FROZEN
flag is not set, affecting the return value of the freezing() function,
in order to address a warning in __thaw_task.
A race condition exists that may allow tasks to escape being frozen. The
following scenario demonstrates this issue:
CPU 0 (get_signal path) CPU 1 (freezer.state reader)
try_to_freeze read freezer.state
__refrigerator freezer_read
update_if_frozen
WRITE_ONCE(current->__state, TASK_FROZEN);
...
/* Task is now marked frozen */
/* frozen(task) == true */
/* Assuming other tasks are frozen */
freezer->state |= CGROUP_FROZEN;
/* freezing(current) returns false */
/* because cgroup is frozen (not freezing) */
break out
__set_current_state(TASK_RUNNING);
/* Bug: Task resumes running when it should remain frozen */
The existing !frozen(p) check in __thaw_task makes the
WARN_ON_ONCE(freezing(p)) warning redundant. Removing this warning enables
reverting the commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check
if not frozen") to resolve the issue.
The warning has been removed in the previous patch. This patch revert the
commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not
frozen") to complete the fix.
Fixes: cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not frozen")
Reported-by: Zhong Jiawei<zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not
frozen") modified the cgroup_freezing() logic to verify that the FROZEN
flag is not set, affecting the return value of the freezing() function,
in order to address a warning in __thaw_task.
A race condition exists that may allow tasks to escape being frozen. The
following scenario demonstrates this issue:
CPU 0 (get_signal path) CPU 1 (freezer.state reader)
try_to_freeze read freezer.state
__refrigerator freezer_read
update_if_frozen
WRITE_ONCE(current->__state, TASK_FROZEN);
...
/* Task is now marked frozen */
/* frozen(task) == true */
/* Assuming other tasks are frozen */
freezer->state |= CGROUP_FROZEN;
/* freezing(current) returns false */
/* because cgroup is frozen (not freezing) */
break out
__set_current_state(TASK_RUNNING);
/* Bug: Task resumes running when it should remain frozen */
The existing !frozen(p) check in __thaw_task makes the
WARN_ON_ONCE(freezing(p)) warning redundant. Removing this warning enables
reverting commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to resolve the issue.
This patch removes the warning from __thaw_task. A subsequent patch will
revert commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to complete the fix.
Reported-by: Zhong Jiawei<zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
|
|
Before the commit 36df6e3dbd7e ("cgroup: make css_rstat_updated nmi
safe"), the struct llist_node is expected to be private to the one
inserting the node to the lockless list or the one removing the node
from the lockless list. After the mentioned commit, the llist_node in
the rstat code is per-cpu shared between the stacked contexts i.e.
process, softirq, hardirq & nmi. It is possible the compiler may tear
the loads or stores of llist_node. Let's avoid that.
KCSAN reported the following race:
Reported by Kernel Concurrency Sanitizer on:
CPU: 60 UID: 0 PID: 5425 ... 6.16.0-rc3-next-20250626 #1 NONE
Tainted: [E]=UNSIGNED_MODULE
Hardware name: ...
==================================================================
==================================================================
BUG: KCSAN: data-race in css_rstat_flush / css_rstat_updated
write to 0xffffe8fffe1c85f0 of 8 bytes by task 1061 on cpu 1:
css_rstat_flush+0x1b8/0xeb0
__mem_cgroup_flush_stats+0x184/0x190
flush_memcg_stats_dwork+0x22/0x50
process_one_work+0x335/0x630
worker_thread+0x5f1/0x8a0
kthread+0x197/0x340
ret_from_fork+0xd3/0x110
ret_from_fork_asm+0x11/0x20
read to 0xffffe8fffe1c85f0 of 8 bytes by task 3551 on cpu 15:
css_rstat_updated+0x81/0x180
mod_memcg_lruvec_state+0x113/0x2d0
__mod_lruvec_state+0x3d/0x50
lru_add+0x21e/0x3f0
folio_batch_move_lru+0x80/0x1b0
__folio_batch_add_and_move+0xd7/0x160
folio_add_lru_vma+0x42/0x50
do_anonymous_page+0x892/0xe90
__handle_mm_fault+0xfaa/0x1520
handle_mm_fault+0xdc/0x350
do_user_addr_fault+0x1dc/0x650
exc_page_fault+0x5c/0x110
asm_exc_page_fault+0x22/0x30
value changed: 0xffffe8fffe18e0d0 -> 0xffffe8fffe1c85f0
$ ./scripts/faddr2line vmlinux css_rstat_flush+0x1b8/0xeb0
css_rstat_flush+0x1b8/0xeb0:
init_llist_node at include/linux/llist.h:86
(inlined by) llist_del_first_init at include/linux/llist.h:308
(inlined by) css_process_update_tree at kernel/cgroup/rstat.c:148
(inlined by) css_rstat_updated_list at kernel/cgroup/rstat.c:258
(inlined by) css_rstat_flush at kernel/cgroup/rstat.c:389
$ ./scripts/faddr2line vmlinux css_rstat_updated+0x81/0x180
css_rstat_updated+0x81/0x180:
css_rstat_updated at kernel/cgroup/rstat.c:90 (discriminator 1)
These are expected race and a simple READ_ONCE/WRITE_ONCE resolves these
reports. However let's add comments to explain the race and the need for
memory barriers if stronger guarantees are needed.
More specifically the rstat updater and the flusher can race and cause a
scenario where the stats updater skips adding the css to the lockless
list but the flusher might not see those updates done by the skipped
updater. This is benign race and the subsequent flusher will flush those
stats and at the moment there aren't any rstat users which are not fine
with this kind of race. However some future user might want more
stricter guarantee, so let's add appropriate comments to ease the job of
future users.
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: 36df6e3dbd7e ("cgroup: make css_rstat_updated nmi safe")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address three issues introduced during the current development
cycle and related to system suspend and hibernation, one triggering
when asynchronous suspend of devices fails, one possibly affecting
memory management in the core suspend code error path, and one due to
duplicate filesystems freezing during system suspend:
- Fix a deadlock that may occur on asynchronous device suspend
failures due to missing completion updates in error paths (Rafael
Wysocki)
- Drop a misplaced pm_restore_gfp_mask() call, which may cause swap
to be accessed too early if system suspend fails, from
suspend_devices_and_enter() (Rafael Wysocki)
- Remove duplicate filesystems_freeze/thaw() calls, which sometimes
cause systems to be unable to resume, from enter_state() (Zihuan
Zhang)"
* tag 'pm-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Update power.completion for all devices on errors
PM: suspend: clean up redundant filesystems_freeze/thaw() handling
PM: suspend: Drop a misplaced pm_restore_gfp_mask() call
|
|
The 'commit 35f96de04127 ("bpf: Introduce BPF token object")' added
BPF token as a new kind of BPF kernel object. And BPF_OBJ_GET_INFO_BY_FD
already used to get BPF object info, so we can also get token info with
this cmd.
One usage scenario, when program runs failed with token, because of
the permission failure, we can report what BPF token is allowing with
this API for debugging.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250716134654.1162635-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use BTF_ID_LIST_SINGLE(a, b, c) instead of
BTF_ID_LIST(a)
BTF_ID(b, c)
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/r/20250710055419.70544-1-yangfeng59949@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The last iterators update (commit 515ee52b2224 ("bpf: make preloaded
map iterators to display map elements count")) missed the big-endian
skeleton. Update it by running "make big" with Debian clang version
21.0.0 (++20250706105601+01c97b4953e8-1~exp1~20250706225612.1558).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250710100907.45880-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Avoid invoking update_locked_rq() when the runqueue (rq) pointer is NULL
in the SCX_CALL_OP and SCX_CALL_OP_RET macros.
Previously, calling update_locked_rq(NULL) with preemption enabled could
trigger the following warning:
BUG: using __this_cpu_write() in preemptible [00000000]
This happens because __this_cpu_write() is unsafe to use in preemptible
context.
rq is NULL when an ops invoked from an unlocked context. In such cases, we
don't need to store any rq, since the value should already be NULL
(unlocked). Ensure that update_locked_rq() is only called when rq is
non-NULL, preventing calling __this_cpu_write() on preemptible context.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Fixes: 18853ba782bef ("sched_ext: Track currently locked rq")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.15
|
|
After a recent change in clang to strengthen uninitialized warnings [1],
it points out that in one of the error paths in parse_btf_arg(), params
is used uninitialized:
kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized]
660 | return PTR_ERR(params);
| ^~~~~~
Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing
up the warning.
Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2110
Fixes: d157d7694460 ("tracing/probes: Support BTF field access from $retval")
Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Extract the complex expedited handling condition in rcu_read_unlock_special()
into a separate function rcu_unlock_needs_exp_handling() with detailed
comments explaining each condition.
This improves code readability. No functional change intended.
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
Currently, SRCU-fast grace periods use synchronize_rcu() to provide the
needed ordering with readers, even given an expedited SRCU-fast grace
period, which isn't all that expedited. This commit therefore instead
uses synchronize_rcu_expedited() if there is an expedited SRCU-fast
grace period in flight.
Of course, given an non-expedited SRCU-fast grace period blocked in
synchronize_rcu(), a later request for an expedited SRCU-fast grace
period will wait for that synchronize_rcu() to return before switching
to use of synchronize_rcu_expedited(). If this turns out to be a real
problem for a production workload, we can increase the complexity (but
likely also degrade the energy efficiency) to speed things up further.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
Because SRCU-lite is being replaced by SRCU-fast, this commit removes
support for SRCU-lite from rcutorture.c
Both SRCU-lite and SRCU-fast provide faster readers by dropping the
smp_mb() call from their lock and unlock primitives, but incur a pair
of added RCU grace periods during the SRCU grace period. There is a
trivial mapping from the SRCU-lite API to that of SRCU-fast, so there
should be no transition issues.
[ paulmck: Apply Christoph Hellwig feedback. ]
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
Because SRCU-lite is being replaced by SRCU-fast, this commit removes
support for SRCU-lite from refscale.c.
Both SRCU-lite and SRCU-fast provide faster readers by dropping the
smp_mb() call from their lock and unlock primitives, but incur a pair
of added RCU grace periods during the SRCU grace period. There is a
trivial mapping from the SRCU-lite API to that of SRCU-fast, so there
should be no transition issues.
[ paulmck: Apply Christoph Hellwig feedback. ]
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
During rcu_read_unlock_special(), if this happens during irq_exit(), we
can lockup if an IPI is issued. This is because the IPI itself triggers
the irq_exit() path causing a recursive lock up.
This is precisely what Xiongfeng found when invoking a BPF program on
the trace_tick_stop() tracepoint As shown in the trace below. Fix by
managing the irq_work state correctly.
irq_exit()
__irq_exit_rcu()
/* in_hardirq() returns false after this */
preempt_count_sub(HARDIRQ_OFFSET)
tick_irq_exit()
tick_nohz_irq_exit()
tick_nohz_stop_sched_tick()
trace_tick_stop() /* a bpf prog is hooked on this trace point */
__bpf_trace_tick_stop()
bpf_trace_run2()
rcu_read_unlock_special()
/* will send a IPI to itself */
irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
A simple reproducer can also be obtained by doing the following in
tick_irq_exit(). It will hang on boot without the patch:
static inline void tick_irq_exit(void)
{
+ rcu_read_lock();
+ WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, true);
+ rcu_read_unlock();
+
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Closes: https://lore.kernel.org/all/9acd5f9f-6732-7701-6880-4b51190aa070@huawei.com/
Tested-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
[neeraj: Apply Frederic's suggested fix for PREEMPT_RT]
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
Automatically enable the rcu_normal_wake_from_gp parameter on
systems with a small number of CPUs. The activation threshold
is set to 16 CPUs.
This helps to reduce a latency of normal synchronize_rcu() API
by waking up GP-waiters earlier and decoupling synchronize_rcu()
callers from regular callback handling.
A benchmark running 64 parallel jobs(system with 64 CPUs) invoking
synchronize_rcu() demonstrates a notable latency reduction with the
setting enabled.
Latency distribution (microseconds):
<default>
0 - 9999 : 1
10000 - 19999 : 4
20000 - 29999 : 399
30000 - 39999 : 3197
40000 - 49999 : 10428
50000 - 59999 : 17363
60000 - 69999 : 15529
70000 - 79999 : 9287
80000 - 89999 : 4249
90000 - 99999 : 1915
100000 - 109999 : 922
110000 - 119999 : 390
120000 - 129999 : 187
...
<default>
<rcu_normal_wake_from_gp>
0 - 9999 : 1
10000 - 19999 : 234
20000 - 29999 : 6678
30000 - 39999 : 33463
40000 - 49999 : 20669
50000 - 59999 : 2766
60000 - 69999 : 183
...
<rcu_normal_wake_from_gp>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is
invoked within an interrupts-disabled region of code [1], it will invoke
rcu_read_unlock_special(), which uses an irq-work handler to force the
system to notice when the RCU read-side critical section actually ends.
That end won't happen until interrupts are enabled at the soonest.
In some kernels, such as those booted with rcutree.use_softirq=y, the
irq-work handler is used unconditionally.
The per-CPU rcu_data structure's ->defer_qs_iw_pending field is
updated by the irq-work handler and is both read and updated by
rcu_read_unlock_special(). This resulted in the following KCSAN splat:
------------------------------------------------------------------------
BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special
read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8:
rcu_read_unlock_special+0x175/0x260
__rcu_read_unlock+0x92/0xa0
rt_spin_unlock+0x9b/0xc0
__local_bh_enable+0x10d/0x170
__local_bh_enable_ip+0xfb/0x150
rcu_do_batch+0x595/0xc40
rcu_cpu_kthread+0x4e9/0x830
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8:
rcu_preempt_deferred_qs_handler+0x1e/0x30
irq_work_single+0xaf/0x160
run_irq_workd+0x91/0xc0
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
no locks held by irq_work/8/88.
irq event stamp: 200272
hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320
hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70
softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0
softirqs last disabled at (0): [<0000000000000000>] 0x0
------------------------------------------------------------------------
The problem is that irq-work handlers run with interrupts enabled, which
means that rcu_preempt_deferred_qs_handler() could be interrupted,
and that interrupt handler might contain an RCU read-side critical
section, which might invoke rcu_read_unlock_special(). In the strict
KCSAN mode of operation used by RCU, this constitutes a data race on
the ->defer_qs_iw_pending field.
This commit therefore disables interrupts across the portion of the
rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending
field. This suffices because this handler is not a fast path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
|
|
Add zoned block commands to blk_fill_rwbs:
- ZONE APPEND will be decoded as 'ZA'
- ZONE RESET will be decoded as 'ZR'
- ZONE RESET ALL will be decoded as 'ZRA'
- ZONE FINISH will be decoded as 'ZF'
- ZONE OPEN will be decoded as 'ZO'
- ZONE CLOSE will be decoded as 'ZC'
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250715115324.53308-2-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drop the direct pm_restore_gfp_mask() call from the KEXEC_JUMP flow in
kernel_kexec() because it is redundant. Namely, dpm_resume_end()
called beforehand in the same code path invokes that function and
it is sufficient to invoke it once.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/1949230.tdWV9SEqCh@rjwysocki.net
[ rjw: Rebase after fixing up previous changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If dpm_suspend_start() fails, dpm_resume_end() must be called to
recover devices whose suspend callbacks have been called, but this
does not happen in the KEXEC_JUMP flow's error path due to a confused
goto target label.
Address this by using the correct target label in the goto statement in
question and drop the Resume_console label that is not used any more.
Fixes: 2965faa5e03d ("kexec: split kexec_load syscall from kexec core code")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2396879.ElGaqSPkdT@rjwysocki.net
[ rjw: Drop unused label and amend the changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The recently introduced support for freezing filesystems during system
suspend included calls to filesystems_freeze() in both suspend_prepare()
and enter_state(), as well as calls to filesystems_thaw() in both
suspend_finish() and the Unlock path in enter_state(). These are
redundant.
Moreover, calling filesystems_freeze() twice, from both suspend_prepare()
and enter_state(), leads to a black screen and makes the system unable
to resume in some cases.
Address this as follows:
- filesystems_freeze() is already called in suspend_prepare(), which
is the proper and consistent place to handle pre-suspend operations.
The second call in enter_state() is unnecessary and so remove it.
- filesystems_thaw() is invoked in suspend_finish(), which covers
successful suspend/resume paths. In the failure case, add a call
to filesystems_thaw() only when needed, avoiding the duplicate call
in the general Unlock path.
This change simplifies the suspend code and avoids repeated freeze/thaw
calls, while preserving correct ordering and behavior.
Fixes: eacfbf74196f ("power: freeze filesystems during suspend/resume")
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/20250712030824.81474-1-zhangzihuan@kylinos.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pm_restore_gfp_mask() call added by commit 12ffc3b1513e ("PM:
Restrict swap use to later in the suspend sequence") to
suspend_devices_and_enter() is done too early because it takes
place before calling dpm_resume() in dpm_resume_end() and some
swap-backing devices may not be ready at that point. Moreover,
dpm_resume_end() called subsequently in the same code path invokes
pm_restore_gfp_mask() again and calling it twice in a row is
pointless.
Drop the misplaced pm_restore_gfp_mask() call from
suspend_devices_and_enter() to address this issue.
Fixes: 12ffc3b1513e ("PM: Restrict swap use to later in the suspend sequence")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2810409.mvXUDI8C0e@rjwysocki.net
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add kerneldoc for '__get_insn_slot' function to fix W=1 warnings:
kernel/kprobes.c:141 function parameter 'c' not described in '__get_insn_slot'
Link: https://lore.kernel.org/all/20250704143817707TOCcfTRWsO5OAbQ2eYoU9@zte.com.cn/
Signed-off-by: Peng Jiang <jiang.peng9@zte.com.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
lockdep_unregister_key() is called from critical code paths, including
sections where rtnl_lock() is held. For example, when replacing a qdisc
in a network device, network egress traffic is disabled while
__qdisc_destroy() is called for every network queue.
If lockdep is enabled, __qdisc_destroy() calls lockdep_unregister_key(),
which gets blocked waiting for synchronize_rcu() to complete.
For example, a simple tc command to replace a qdisc could take 13
seconds:
# time /usr/sbin/tc qdisc replace dev eth0 root handle 0x1: mq
real 0m13.195s
user 0m0.001s
sys 0m2.746s
During this time, network egress is completely frozen while waiting for
RCU synchronization.
Use synchronize_rcu_expedited() instead to minimize the impact on
critical operations like network connectivity changes.
This improves 10x the function call to tc, when replacing the qdisc for
a network card.
# time /usr/sbin/tc qdisc replace dev eth0 root handle 0x1: mq
real 0m1.789s
user 0m0.000s
sys 0m1.613s
[boqun: Fixed the comment and add more information for the temporary
workaround, and add TODO information for hazptr]
Reported-by: Erik Lundgren <elundgren@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250321-lockdep-v1-1-78b732d195fb@debian.org
|
|
hung_task_{set,clear}_blocker() is already guarded by
CONFIG_DETECT_HUNG_TASK_BLOCKER in hung_task.h, So remove
the redudant check of #ifdef.
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250704015218.359754-1-ranxiaokai627@163.com
|
|
gcc warns about 'static const' variables even in headers when building
with -Wunused-const-variables enabled:
In file included from kernel/locking/lockdep_proc.c:25:
kernel/locking/lockdep_internals.h:69:28: error: 'LOCKF_USED_IN_IRQ_READ' defined but not used [-Werror=unused-const-variable=]
69 | static const unsigned long LOCKF_USED_IN_IRQ_READ =
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/locking/lockdep_internals.h:63:28: error: 'LOCKF_ENABLED_IRQ_READ' defined but not used [-Werror=unused-const-variable=]
63 | static const unsigned long LOCKF_ENABLED_IRQ_READ =
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/locking/lockdep_internals.h:57:28: error: 'LOCKF_USED_IN_IRQ' defined but not used [-Werror=unused-const-variable=]
57 | static const unsigned long LOCKF_USED_IN_IRQ =
| ^~~~~~~~~~~~~~~~~
kernel/locking/lockdep_internals.h:51:28: error: 'LOCKF_ENABLED_IRQ' defined but not used [-Werror=unused-const-variable=]
51 | static const unsigned long LOCKF_ENABLED_IRQ =
| ^~~~~~~~~~~~~~~~~
This one is easy to avoid by changing the generated constant definition
into an equivalent enum.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250409122314.2848028-6-arnd@kernel.org
|
|
Returning a large structure from the lock_stats() function causes clang
to have multiple copies of it on the stack and copy between them, which
can end up exceeding the frame size warning limit:
kernel/locking/lockdep.c:300:25: error: stack frame size (1464) exceeds limit (1280) in 'lock_stats' [-Werror,-Wframe-larger-than]
300 | struct lock_class_stats lock_stats(struct lock_class *class)
Change the calling conventions to directly operate on the caller's copy,
which apparently is what gcc does already.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250610092941.2642847-1-arnd@kernel.org
|
|
Rename the existing sha1_init() to sha1_init_raw(), since it conflicts
with the upcoming library function. This will later be removed, but
this keeps the kernel building for the introduction of the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Start to flesh out the real find_proxy_task() implementation,
but avoid the migration cases for now, in those cases just
deactivate the donor task and pick again.
To ensure the donor task or other blocked tasks in the chain
aren't migrated away while we're running the proxy, also tweak
the fair class logic to avoid migrating donor or mutex blocked
tasks.
[jstultz: This change was split out from the larger proxy patch]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-9-jstultz@google.com
|
|
Proxy execution forms atomic pairs of tasks: The waiting donor
task (scheduling context) and a proxy (execution context). The
donor task, along with the rest of the blocked chain, follows
the proxy wrt CPU placement.
They can be the same task, in which case push/pull doesn't need any
modification. When they are different, however,
FIFO1 & FIFO42:
,-> RT42
| | blocked-on
| v
blocked_donor | mutex
| | owner
| v
`-- RT1
RT1
RT42
CPU0 CPU1
^ ^
| |
overloaded !overloaded
rq prio = 42 rq prio = 0
RT1 is eligible to be pushed to CPU1, but should that happen it will
"carry" RT42 along. Clearly here neither RT1 nor RT42 must be seen as
push/pullable.
Unfortunately, only the donor task is usually dequeued from the rq,
and the proxy'ed execution context (rq->curr) remains on the rq.
This can cause RT1 to be selected for migration from logic like the
rt pushable_list.
Thus, adda a dequeue/enqueue cycle on the proxy task before __schedule
returns, which allows the sched class logic to avoid adding the now
current task to the pushable_list.
Furthermore, tasks becoming blocked on a mutex don't need an explicit
dequeue/enqueue cycle to be made (push/pull)able: they have to be running
to block on a mutex, thus they will eventually hit put_prev_task().
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-8-jstultz@google.com
|
|
Add a find_proxy_task() function which doesn't do much.
When we select a blocked task to run, we will just deactivate it
and pick again. The exception being if it has become unblocked
after find_proxy_task() was called.
This allows us to validate keeping blocked tasks on the runqueue
and later deactivating them is working ok, stressing the failure
cases for when a proxy isn't found.
Greatly simplified from patch by:
Peter Zijlstra (Intel) <peterz@infradead.org>
Juri Lelli <juri.lelli@redhat.com>
Valentin Schneider <valentin.schneider@arm.com>
Connor O'Brien <connoro@google.com>
[jstultz: Split out from larger proxy patch and simplified
for review and testing.]
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-7-jstultz@google.com
|
|
Without proxy-exec, we normally charge the "current" task for
both its vruntime as well as its sum_exec_runtime.
With proxy, however, we have two "current" contexts: the
scheduler context and the execution context. We want to charge
the execution context rq->curr (ie: proxy/lock holder) execution
time to its sum_exec_runtime (so it's clear to userland the
rq->curr task *is* running), as well as its thread group.
However the rest of the time accounting (such a vruntime and
cgroup accounting), we charge against the scheduler context
(rq->donor) task, because it is from that task that the time
is being "donated".
If the donor and curr tasks are the same, then it's the same as
without proxy.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-6-jstultz@google.com
|
|
Absorb update_curr_task() into update_curr_se(), and
in the process simplify update_curr_common().
This will make the next step a bit easier.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-5-jstultz@google.com
|
|
This lets us assert mutex::wait_lock is held whenever we access
p->blocked_on, as well as warn us for unexpected state changes.
[fix conflicts, call in more places]
[jstultz: tweaked commit subject, reworked a good bit]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-4-jstultz@google.com
|
|
Track the blocked-on relation for mutexes, to allow following this
relation at schedule time.
task
| blocked-on
v
mutex
| owner
v
task
This all will be used for tracking blocked-task/mutex chains
with the prox-execution patch in a similar fashion to how
priority inheritance is done with rt_mutexes.
For serialization, blocked-on is only set by the task itself
(current). And both when setting or clearing (potentially by
others), is done while holding the mutex::wait_lock.
[minor changes while rebasing]
[jstultz: Fix blocked_on tracking in __mutex_lock_common in error paths]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-3-jstultz@google.com
|
|
Add a CONFIG_SCHED_PROXY_EXEC option, along with a boot argument
sched_proxy_exec= that can be used to disable the feature at boot
time if CONFIG_SCHED_PROXY_EXEC was enabled.
Also uses this option to allow the rq->donor to be different from
rq->curr.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-2-jstultz@google.com
|
|
Avoid merge conflicts
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Support for overlapping domains added in commit e3589f6c81e4 ("sched:
Allow for overlapping sched_domain spans") also allowed forcefully
setting SD_OVERLAP for !NUMA domains via FORCE_SD_OVERLAP sched_feat().
Since NUMA domains had to be presumed overlapping to ensure correct
behavior, "sched_domain_topology_level::flags" was introduced. NUMA
domains added the SDTL_OVERLAP flag would ensure SD_OVERLAP was always
added during build_sched_domains() for these domains, even when
FORCE_SD_OVERLAP was off.
Condition for adding the SD_OVERLAP flag at the aforementioned commit
was as follows:
if (tl->flags & SDTL_OVERLAP || sched_feat(FORCE_SD_OVERLAP))
sd->flags |= SD_OVERLAP;
The FORCE_SD_OVERLAP debug feature was removed in commit af85596c74de
("sched/topology: Remove FORCE_SD_OVERLAP") which left the NUMA domains
as the exclusive users of SDTL_OVERLAP, SD_OVERLAP, and SD_NUMA flags.
Get rid of SDTL_OVERLAP and SD_OVERLAP as they have become redundant
and instead rely on SD_NUMA to detect the only overlapping domain
currently supported. Since SDTL_OVERLAP was the only user of
"tl->flags", get rid of "sched_domain_topology_level::flags" too.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ba4dbdf8-bc37-493d-b2e0-2efb00ea3e19@amd.com
|
|
Define a small SDTL_INIT(maskfn, flagsfn, name) macro and use it to build the
sched_domain_topology_level array. Purely a cleanup; behaviour is unchanged.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250710105715.66594-2-me@linux.beauty
|
|
A global limits change (sched_rt_handler() logic) currently leaves stale
and/or incorrect values in variables related to accounting (e.g.
extra_bw).
Properly clean up per runqueue variables before implementing the change
and rebuild scheduling domains (so that accounting is also properly
restored) after such a change is complete.
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-4-juri.lelli@redhat.com
|
|
dl_clear_root_domain() doesn't take into account the fact that per-rq
extra_bw variables retain values computed before root domain changes,
resulting in broken accounting.
Fix it by resetting extra_bw to max_bw before restoring back dl-servers
contributions.
Fixes: 2ff899e351643 ("sched/deadline: Rebuild root domain accounting after every update")
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-3-juri.lelli@redhat.com
|
|
dl-servers are currently initialized too early at boot when CPUs are not
fully up (only boot CPU is). This results in miscalculation of per
runqueue DEADLINE variables like extra_bw (which needs a stable CPU
count).
Move initialization of dl-servers later on after SMP has been
initialized and CPUs are all online, so that CPU count is stable and
DEADLINE variables can be computed correctly.
Fixes: d741f297bceaf ("sched/fair: Fair server interface")
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-2-juri.lelli@redhat.com
|
|
The commit e6fe3f422be1 ("sched: Make multiple runqueue task counters
32-bit") changed nr_uninterruptible to an unsigned int. But the
nr_uninterruptible values for each of the CPU runqueues can grow to
large numbers, sometimes exceeding INT_MAX. This is valid, if, over
time, a large number of tasks are migrated off of one CPU after going
into an uninterruptible state. Only the sum of all nr_interruptible
values across all CPUs yields the correct result, as explained in a
comment in kernel/sched/loadavg.c.
Change the type of nr_uninterruptible back to unsigned long to prevent
overflows, and thus the miscalculation of load average.
Fixes: e6fe3f422be1 ("sched: Make multiple runqueue task counters 32-bit")
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250709173328.606794-1-aruna.ramakrishna@oracle.com
|
|
MIGRATE_ISOLATE is a standalone bit, so a pageblock cannot be initialized
to just MIGRATE_ISOLATE. Add init_pageblock_migratetype() to enable
initialize a pageblock with a migratetype and isolated.
Link: https://lkml.kernel.org/r/20250617021115.2331563-4-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Richard Chang <richardycc@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
cpuset is only concerned when a numa node changes its memory state, as it
needs to know the current numa nodes with memory to keep an updated
mems_allowed mask. So stop using the memory notifier and use the new numa
node notifer instead.
Link: https://lkml.kernel.org/r/20250616135158.450136-9-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Setting anon_name is done via madvise_set_anon_name() and behaves a lot of
like other madvise operations. However, apparently because madvise() has
lacked the 4th argument and prctl() not, the userspace entry point has
been implemented via prctl(PR_SET_VMA, ...) and handled first by
prctl_set_vma().
Currently prctl_set_vma() lives in kernel/sys.c but setting the
vma->anon_name is mm-specific code so extract it to a new
set_anon_vma_name() function under mm. mm/madvise.c seems to be the most
straightforward place as that's where madvise_set_anon_name() lives. Stop
declaring the latter in mm.h and instead declare set_anon_vma_name().
Link: https://lkml.kernel.org/r/20250624-anon_name_cleanup-v2-2-600075462a11@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Colin Cross <ccross@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Prevent perf_sigtrap() from observing an exiting task and warning
about it
* tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix WARN in perf_sigtrap()
|
|
are required for a merge of the series "mm: folio_pte_batch()
improvements".
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
|
