| Age | Commit message (Collapse) | Author |
|---|
|
state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock.
This allows a use-after-free race:
CPU 0 CPU 1
----- -----
state_show() damon_sysfs_turn_damon_on()
ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock);
damon_destroy_ctx(kdamond->damon_ctx);
kdamond->damon_ctx = NULL;
mutex_unlock(&damon_sysfs_lock);
damon_is_running(ctx); /* ctx is freed */
mutex_lock(&ctx->kdamond_lock); /* UAF */
(The race can also occur with damon_sysfs_kdamonds_rm_dirs() and
damon_sysfs_kdamond_release(), which free or replace the context under
damon_sysfs_lock.)
Fix by taking damon_sysfs_lock before dereferencing the context, mirroring
the locking used in pid_show().
The bug has existed since state_show() first accessed kdamond->damon_ctx.
Link: https://lkml.kernel.org/r/20250905101046.2288-1-disclosure@aisle.com
Fixes: a61ea561c871 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring")
Signed-off-by: Stanislav Fort <disclosure@aisle.com>
Reported-by: Stanislav Fort <disclosure@aisle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When creating a new scheme of DAMON_RECLAIM, the calculation of
'min_age_region' uses 'aggr_interval' as the divisor, which may lead to
division-by-zero errors. Fix it by directly returning -EINVAL when such a
case occurs.
Link: https://lkml.kernel.org/r/20250827115858.1186261-3-yanquanmin1@huawei.com
Fixes: f5a79d7c0c87 ("mm/damon: introduce struct damos_access_pattern")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters
application".
DAMON's RECLAIM and LRU_SORT modules perform no validation on
user-configured parameters during application, which may lead to
division-by-zero errors.
Avoid the divide-by-zero by adding validation checks when DAMON modules
attempt to apply the parameters.
This patch (of 2):
During the calculation of 'hot_thres' and 'cold_thres', either
'sample_interval' or 'aggr_interval' is used as the divisor, which may
lead to division-by-zero errors. Fix it by directly returning -EINVAL
when such a case occurs. Additionally, since 'aggr_interval' is already
required to be set no smaller than 'sample_interval' in damon_set_attrs(),
only the case where 'sample_interval' is zero needs to be checked.
Link: https://lkml.kernel.org/r/20250827115858.1186261-2-yanquanmin1@huawei.com
Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kernel initializes the "jiffies" timer as 5 minutes below zero, as shown
in include/linux/jiffies.h
/*
* Have the 32 bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
*/
#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
And jiffies comparison help functions cast unsigned value to signed to
cover wraparound
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
When quota->charged_from is initialized to 0, time_after_eq() can
incorrectly return FALSE even after reset_interval has elapsed. This
occurs when (jiffies - reset_interval) produces a value with MSB=1, which
is interpreted as negative in signed arithmetic.
This issue primarily affects 32-bit systems because: On 64-bit systems:
MSB=1 values occur after ~292 million years from boot (assuming HZ=1000),
almost impossible.
On 32-bit systems: MSB=1 values occur during the first 5 minutes after
boot, and the second half of every jiffies wraparound cycle, starting from
day 25 (assuming HZ=1000)
When above unexpected FALSE return from time_after_eq() occurs, the
charging window will not reset. The user impact depends on esz value at
that time.
If esz is 0, scheme ignores configured quotas and runs without any limits.
If esz is not 0, scheme stops working once the quota is exhausted. It
remains until the charging window finally resets.
So, change quota->charged_from to jiffies at damos_adjust_quota() when it
is considered as the first charge window. By this change, we can avoid
unexpected FALSE return from time_after_eq()
Link: https://lkml.kernel.org/r/20250822025057.1740854-1-ekffu200098@gmail.com
Fixes: 2b8a248d5873 ("mm/damon/schemes: implement size quota for schemes application speed control") # 5.16
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On 32-bit systems, the throughput calculation in
damos_set_effective_quota() is prone to unnecessary multiplication
overflow. Using mult_frac() to fix it.
Andrew Paniakin also recently found and privately reported this issue, on
64 bit systems. This can also happen on 64-bit systems, once the charged
size exceeds ~17 TiB. On systems running for long time in production,
this issue can actually happen.
More specifically, when a DAMOS scheme having the time quota run for
longtime, throughput calculation can overflow and set esz too small. As a
result, speed of the scheme get unexpectedly slow.
Link: https://lkml.kernel.org/r/20250821125555.3020951-1-yanquanmin1@huawei.com
Fixes: 1cd243030059 ("mm/damon/schemes: implement time quota")
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reported-by: Andrew Paniakin <apanyaki@amazon.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: ze zuo <zuoze1@huawei.com>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_sysfs_scheme_rm_dirs() puts dests directory kobject before removing
its internal files. Sincee putting the kobject frees its container
struct, and the internal files removal accesses the container,
use-after-free happens. Fix it by putting the reference _after_ removing
the files.
Link: https://lkml.kernel.org/r/20250816165559.2601-1-sj@kernel.org
Fixes: 2cd0bf85a203 ("mm/damon/sysfs-schemes: implement DAMOS action destinations directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Alexandre Ghiti <alex@ghiti.fr>
Closes: https://lore.kernel.org/2d39a734-320d-4341-8f8a-4019eec2dbf2@ghiti.fr
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current damos_commit_filter() does not persist the `allow' value of the
filter. As a result, changing the `allow' value of a filter and
committing doesn't change the `allow' value.
Add the missing `allow' value update, so committing the filter
persistently changes the `allow' value well.
Link: https://lkml.kernel.org/r/20250816015116.194589-1-ekffu200098@gmail.com
Fixes: fe6d7fdd6249 ("mm/damon/core: add damos_filter->allow field")
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.14.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damos_commit_ops_filters() incorrectly uses damos_nth_filter() which
iterates core_filters. As a result, performing a commit unintentionally
corrupts ops_filters.
Add damos_nth_ops_filter() which iterates ops_filters. Use this function
to fix issues caused by wrong iteration.
Link: https://lkml.kernel.org/r/20250810124201.15743-1-ekffu200098@gmail.com
Fixes: 3607cc590f18 ("mm/damon/core: support committing ops_filters") # 6.15.x
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
|
|
damos_va_migrate_dests_add() determines the node a folio should be in
based on the struct damos_migrate_dests associated with the migration
scheme and adds the folio to the linked list corresponding to that node so
it can be migrated later. Currently, folios are isolated and added to the
list even if they are already in the node they should be in.
In using damon weighted interleave more, I've found that the overhead of
needlessly adding these folios to the migration lists can be quite high.
The overhead comes from isolating folios and placing them in the migration
lists inside of damos_va_migrate_dests_add(), as well as the cost of
handling those folios in damon_migrate_pages(). This patch eliminates
that overhead by simply avoiding the addition of folios that are already
in their intended location to the migration list.
To show the benefit of this patch, we start the test workload and start a
DAMON instance attached to that workload with a migrate_hot scheme that
has one dest field sending data to the local node. This way, we are only
measuring the overheads of the scheme, and not the cost of migrating
pages, since data will be allocated to the local node by default. I
tested with two workloads: the embedding reduction workload used in [1]
and a microbenchmark that allocates 20GB of data then sleeps, which is
similar to the memory usage of the embedding reduction workload.
The time taken in damos_va_migrate_dests_add() and damon_migrate_pages()
each aggregation interval is shown below.
Before this patch:
damos_va_migrate_dests_add damon_migrate_pages
microbenchmark ~2ms ~3ms
embedding reduction ~1s ~3s
After this patch:
damos_va_migrate_dests_add damon_migrate_pages
microbenchmark 0us ~40us
embedding reduction 0us ~100us
I did not do an in depth analysis for why things are much slower in the
embedding reduction workload than the microbenchmark. However, I assume
it's because the embedding reduction workload oversaturates the bandwidth
of the local memory node, increasing the memory access latency, and in
turn making the pointer chasing involved in iterating through a linked
list much slower. Regardless of that, this patch results in a significant
speedup.
[1] https://lore.kernel.org/damon/20250709005952.17776-1-bijan311@gmail.com/
Link: https://lkml.kernel.org/r/20250725163300.4602-1-bijan311@gmail.com
Fixes: 19c1dc15c859 ("mm/damon/vaddr: use damos->migrate_dests in migrate_{hot,cold}")
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
damon_migrate_pages() tries migration even if the target node is invalid.
If users mistakenly make such invalid requests via
DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen.
[ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48
[ 7831.884160] #PF: supervisor read access in kernel mode
[ 7831.884681] #PF: error_code(0x0000) - not-present page
[ 7831.885203] PGD 0 P4D 0
[ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI
[ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary)
[ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014
[ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137)
[...]
[ 7831.895953] Call Trace:
[ 7831.896195] <TASK>
[ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192)
[ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851)
[ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.897735] migrate_pages (mm/migrate.c:2078)
[ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137)
[ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354)
[ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405)
[...]
Add a target node validity check in damon_migrate_pages(). The validity
check is stolen from that of do_pages_move(), which is being used for the
move_pages() system call.
Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org
Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Only minimum file operations for refresh_ms file is implemented. Further
implement its designed behavior, the periodic essential files content
update, using repeat mode damon_call().
If non-zero value is written to the file, update DAMON sysfs files for
auto-tuned monitoring intervals, DAMOS stats, and auto-tuned DAMOS quota
values, which are essential to be monitored in most DAMON use cases. The
user-written non-zero value becomes the time delay between the update. If
zero is written to the file, the periodic refresh is disabled.
Link: https://lkml.kernel.org/r/20250717055448.56976-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/sysfs: support periodic and automated stats
update".
DAMON sysfs interface provides files for reading DAMON internal status
including auto-tuned monitoring intervals, DAMOS stats, DAMOS action
applied regions, and auto-tuned DAMOS effective quota. Among those,
auto-tuned monitoring intervals, DAMOS stats and auto-tuned DAMOS
effective quota are essential for common DAMON/S use cases.
The content of the files are not automatically updated, though. Users
should manually request updates of the contents by writing a special
command to 'state' file of each kdamond directory. This interface is good
for minimizing overhead, but causes the below problems.
First, the usage is cumbersome. This is arguably not a big problem, since
the user-space tool (damo) can do this instead of the user.
Second, it can be too slow. The update request is not directly handled by
the sysfs interface but kdamond thread. And kdamond threads wake up only
once per the sampling interval. Hence if sampling interval is not short,
each update request could take too long time. The recommended sampling
interval setup is asking DAMON to automatically tune it, within a range
between 5 milliseconds and 10 seconds. On production systems it is not
very rare to have a few seconds sampling interval as a result of the
auto-tuning, so this can disturb observing DAMON internal status.
Finally, parallel update requests can conflict with each other. When
parallel update requests are received, DAMON sysfs interface simply
returns -EBUSY to one of the requests. DAMON user-space tool is hence
implementing its own backoff mechanism, but this can make the operation
even slower.
Introduce a new sysfs file, namely refresh_ms, for asking DAMON sysfs
interface to repeat the update of the above mentioned essential contents
with a user-specified time delay. If non-zero value is written to the
file, DAMON sysfs interface does the updates for essential DAMON internal
status including auto-tuned monitoring intervals, DAMOS stats, and
auto-tuned DAMOS quotas using the user-written value as the time delay.
In other words, it is similar to periodically writing
'update_schemes_stats', 'update_schemes_effective_quotas', and
'update_tuned_intervals' keywords to the 'state' file. If zero is written
to the file, the automatic refresh is disabled.
This patch (of 4):
Implement a new DAMON sysfs file named 'refresh_ms' under each kdamond
directory. The file will be used as a control knob of automatic refresh
of a few DAMON internal status files. This commit implements only minimum
file operations, though. The automatic refresh feature will be
implemented by the following commit.
Link: https://lkml.kernel.org/r/20250717055448.56976-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250717055448.56976-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS quota goal uses 'nid' field when the metric is
DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP. But the goal commit function is not
updating the goal's nid field. Fix it.
Link: https://lkml.kernel.org/r/20250719181932.72944-1-sj@kernel.org
Fixes: 0e1c773b501f ("mm/damon/core: introduce damos quota goal metrics for memory node utilization") [6.16.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All damon_callback usages are replicated by damon_call() and damos_walk().
Time to say goodbye. Remove damon_callback.
Link: https://lkml.kernel.org/r/20250712195016.151108-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON core layer does target cleanup on its own. Remove duplicated and
unnecessarily selective cleanup attempts in DAMON sysfs interface.
Link: https://lkml.kernel.org/r/20250712195016.151108-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When kdamond_fn() completes, the targets are kept. Those are kept to let
callers do additional cleanups if they need. There are no such additional
cleanups though. DAMON sysfs interface deallocates those in
before_terminate() callback, to reduce unnecessary memory usage, for
[f]vaddr use case. Just destroy the targets for every case in the core
layer. This saves more memory and simplifies the logic.
Link: https://lkml.kernel.org/r/20250712195016.151108-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function was introduced for putting pids and deallocating unnecessary
targets. Hence it is called before damon_destroy_ctx(). Now vaddr puts
pid for each target destruction (cleanup_target()). damon_destroy_ctx()
deallocates the targets anyway. So damon_sysfs_destroy_targets() has no
reason to exist. Remove it.
Link: https://lkml.kernel.org/r/20250712195016.151108-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement cleanup_target() callback for [f]vaddr, which calls put_pid()
for each target that will be destroyed. Also remove redundant put_pid()
calls in core, sysfs and sample modules, which were required to be done
redundantly due to the lack of such self cleanup in vaddr.
Link: https://lkml.kernel.org/r/20250712195016.151108-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some DAMON operation sets may need additional cleanup per target. For
example, [f]vaddr need to put pids of each target. Each user and core
logic is doing that redundantly. Add another DAMON ops callback that will
be used for doing such cleanups in operations set layer.
[sj@kernel.org: add kernel-doc comment for damon_operations->cleanup_target]
Link: https://lkml.kernel.org/r/20250715185239.89152-2-sj@kernel.org
[sj@kernel.org: remove damon_ctx->callback kernel-doc comment]
Link: https://lkml.kernel.org/r/20250715185239.89152-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20250712195016.151108-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_operations.cleanup() is documented to be called for kdamond
termination, but also being called for targets destruction, which is done
for any damon_ctx destruction. Nobody is using the callback for now,
though. Remove the cleanup() call under the destruction.
Link: https://lkml.kernel.org/r/20250712195016.151108-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON_LRU_SORT uses damon_callback for periodically reading and writing
DAMON internal data and parameters. Use its alternative, damon_call()
repeat mode.
Link: https://lkml.kernel.org/r/20250712195016.151108-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON_RECLAIM uses damon_callback for periodically reading and writing
DAMON internal data and parameters. Use its alternative, damon_call()
repeat mode.
Link: https://lkml.kernel.org/r/20250712195016.151108-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON_STAT uses damon_callback for periodically reading DAMON internal
data. Use its alternative, damon_call() repeat mode.
Link: https://lkml.kernel.org/r/20250712195016.151108-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_call() can be useful for reading or writing DAMON internal data for
one time. A common pattern of DAMON core usage from DAMON modules is
doing such reads and writes repeatedly, for example, to periodically
update the DAMOS stats. To do that with damon_call(), callers should call
damon_call() repeatedly, with their own delay loop. Each caller doing
that is repetitive. Introduce a repeat mode damon_call(). Callers can
use the mode by setting a new field in damon_call_control. If the mode is
turned on, damon_call() returns success immediately, and DAMON repeats
invoking the callback function inside the kdamond main loop.
Link: https://lkml.kernel.org/r/20250712195016.151108-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: remove damon_callback".
damon_callback was the only way for communicating with DAMON for contexts
running on its worker thread. The interface is flexible and simple. But
as DAMON evolves with more features, damon_callback has become somewhat
too old. With runtime parameters update, for example, its lack of
synchronization support was found to be inconvenient. Arguably it is also
not easy to use correctly since the callers should understand when each
callback is called, and implication of the return values from the
callbacks.
To replace it, damon_call() and damos_walk() are introduced. And those
replaced a few damon_callback use cases. Some use cases of damon_callback
such as parallel or repetitive DAMON internal data reading and additional
cleanups cannot simply be replaced by damon_call() and damos_walk(),
though.
To allow those replaceable, extend damon_call() for parallel and/or
repeated callbacks and modify the core/ops layers for additional resources
cleanup. With the updates, replace the remaining damon_callback usages
and finally say goodbye to damon_callback.
This patch (of 14):
Calling damon_call() while it is serving for another parallel thread
immediately fails with -EBUSY. The caller should call it again, later.
Each caller implementing such retry logic would be redundant. Accept
parallel damon_call() requests and do the wait instead of the caller.
Link: https://lkml.kernel.org/r/20250712195016.151108-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250712195016.151108-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The paddr versions of migrate_{hot/cold} filter out folios from migration
based on the scheme's filters. This patch does the same for the vaddr
versions of those schemes.
The filtering code is mostly the same for the paddr and vaddr versions.
The exception is the young filter. paddr determines if a page is young by
doing a folio rmap walk to find the page table entries corresponding to
the folio. However, vaddr schemes have easier access to the page tables,
so we add some logic to avoid the extra work.
Link: https://lkml.kernel.org/r/20250709005952.17776-14-bijan311@gmail.com
Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch moves damos_pa_filter_match and the functions it calls to
ops-common, renaming it to damos_folio_filter_match. Doing so allows us
to share the filtering logic for the vaddr version of the
migrate_{hot,cold} schemes.
Link: https://lkml.kernel.org/r/20250709005952.17776-13-bijan311@gmail.com
Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damos->migrate_dests provides a list of nodes the migrate_{hot,cold}
actions should migrate to, as well as the weights which specify the ratio
pages should be migrated to each destination node.
This patch interleaves pages in the migrate_{hot,cold} actions according
to the information provided in damos->migrate_dests if it is used. The
interleaving algorithm used is similar to the one used in
weighted_interleave_nid(). If damos->migration_dests is not provided, the
actions migrate pages to the node specified in damos->target_nid as
before.
Link: https://lkml.kernel.org/r/20250709005952.17776-12-bijan311@gmail.com
Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
migrate_{hot,cold} are paddr schemes that are used to migrate hot/cold
data to a specified node. However, these schemes are only available when
doing physical address monitoring. This patch adds an implementation for
them virtual address monitoring as well.
Link: https://lkml.kernel.org/r/20250709005952.17776-10-bijan311@gmail.com
Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch moves the damon_pa_migrate_pages function along with its
corresponding helper functions from paddr to ops-common. The function
prefix of "damon_pa_" was also changed to just "damon_" accordingly.
This patch will allow page migration to be available to vaddr schemes as
well as paddr schemes.
Link: https://lkml.kernel.org/r/20250709005952.17776-9-bijan311@gmail.com
Co-developed-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When committing new scheme parameters from the sysfs, copy the
migrate_dests struct of the source schemes into the destination schemes.
Link: https://lkml.kernel.org/r/20250709005952.17776-8-bijan311@gmail.com
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pass user-specified multiple DAMOS action destinations and their weights
to DAMON core API, so that user requests can really work.
Link: https://lkml.kernel.org/r/20250709005952.17776-5-bijan311@gmail.com
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS_MIGRATE_{HOT,COLD} can have multiple action destinations and their
weights. Implement sysfs directory named 'dests' under each scheme
directory to let DAMON sysfs ABI users utilize the feature. The interface
is similar to other multiple parameters directory like kdamonds or
filters. The directory contains only nr_dests file initially. Writing a
number of desired destinations to nr_dests creates directories of the
number. Each of the created directories has two files named id and
weight. Users can then write the destination's identifier (node id in
case of DAMOS_MIGRATE_*) and weight to the files.
Link: https://lkml.kernel.org/r/20250709005952.17776-4-bijan311@gmail.com
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Bijan Tabatabai <bijantabatab@micron.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a new field to 'struct damos', namely migrate_dests, to allow DAMON
API callers specify multiple migration destination nodes and their
weights. Also update 'struct damos' creation and destruction functions
accordingly to initialize the new field and free up the API
caller-allocated buffers on those, respectively.
Link: https://lkml.kernel.org/r/20250709005952.17776-3-bijan311@gmail.com
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When committing new scheme parameters from the sysfs, the target_nid field
of the damos struct would not be copied. This would result in the
target_nid field to retain its original value, despite being updated in
the sysfs interface.
This patch fixes this issue by copying target_nid in damos_commit().
Link: https://lkml.kernel.org/r/20250709004729.17252-1-bijan311@gmail.com
Fixes: 83dc7bbaecae ("mm/damon/sysfs: use damon_commit_ctx()")
Signed-off-by: Bijan Tabatabai <bijantabatab@micron.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Shankar Jonnalagadda <ravis.opensrc@micron.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_sysfs_before_terminate() is a DAMON callback that is executed from
the kdamond's context. Hence it is safe to access DAMON context internal
data. But the function is unnecessarily holding kdamond_lock of the
context. It is just unnecessary. Remove the locking code.
Link: https://lkml.kernel.org/r/20250705175000.56259-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON core implements a static function to see if a given DAMON context is
running. DAMON sysfs interface is implementing the same one on its own.
Make the core function non-static and reuse it from the DAMON sysfs
interface.
Link: https://lkml.kernel.org/r/20250705175000.56259-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_reclaim_apply_parameters() allocates a new DAMON context, stages
user-specified DAMON parameters on it, and commits to running DAMON
context at once, using damon_commit_ctx(). The code is mistakenly
over-writing the monitoring attributes and the reclaim scheme on the
running context. It is not causing a real problem for monitoring
attributes, but the scheme overwriting can remove scheme's internal status
such as charged quota. Fix the wrong use of the parameter context.
Link: https://lkml.kernel.org/r/20250706193207.39810-7-sj@kernel.org
Fixes: 11ddcfc257a3 ("mm/damon/reclaim: use damon_commit_ctx()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the startup fails, 'enabled' parameter is not reset. As a result,
users show the parameter 'Y' while it is not really working. Fix it by
resetting 'enabled' to 'false' when the work is failed.
Link: https://lkml.kernel.org/r/20250706193207.39810-6-sj@kernel.org
Fixes: 7a034fbba336 ("mm/damon/lru_sort: enable and disable synchronously")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the startup fails, 'enabled' parameter is not reset. As a result,
users show the parameter 'Y' while it is not really working. Fix it by
resetting 'enabled' to 'false' when the work is failed.
Link: https://lkml.kernel.org/r/20250706193207.39810-5-sj@kernel.org
Fixes: 04e98764befa ("mm/damon/reclaim: enable and disable synchronously")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Aim-oriented DAMOS quota auto-tuning is an important and recommended
feature for DAMOS users. Add a trace event for the observability of the
tuned quota and tuning itself.
[sj@kernel.org: initialize sidx in damos_trace_esz()]
Link: https://lkml.kernel.org/r/20250705172003.52324-1-sj@kernel.org
[sj@kernel.org: make damos_esz unconditional trace event]
Link: https://lkml.kernel.org/r/20250709182843.35812-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250704221408.38510-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: add trace events for auto-tuned monitoring
intervals and DAMOS quota".
The aim-oriented auto-tuning features for monitoring intervals and DAMOS
quota are important and recommended. Add tracepoints for observabilities
of those tuned values and the tuning itself.
This patch (of 2):
Aim-oriented monitoring intervals auto-tuning is an important and
recommended feature for DAMON users. Add a trace event for the
observability of the tuned intervals and tuning itself.
Link: https://lkml.kernel.org/r/20250704221408.38510-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250704221408.38510-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
are required for a merge of the series "mm: folio_pte_batch()
improvements".
|
|
Decouple DAMON sysfs interface from damon_ops_id. For this, define and
use new mm/damon/sysfs.c internal data structure that maps the user-space
keywords and damon_ops_id, instead of having the implicit and unflexible
array index rule.
Link: https://lkml.kernel.org/r/20250622213759.50930-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Decouple DAMOS sysfs interface from damos_filter_type. For this, define
and use new sysfs-schemes internal data structure that maps the user-space
keywords and damos_filter_type, instead of having the implicit and
unflexible array index rule.
Link: https://lkml.kernel.org/r/20250622213759.50930-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Decouple DAMOS sysfs interface from damos_wmark_metric. For this, define
and use new sysfs-schemes internal data structure that maps the user-space
keywords and damos_wmark_metric, instead of having the implicit and
unflexible array index rule.
Link: https://lkml.kernel.org/r/20250622213759.50930-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Decouple DAMOS sysfs interface from damos_action. For this, define and
use new sysfs-schemes internal data structure that maps the user-space
keywords and damos_action, instead of having the implicit and unflexible
array index rule.
[akpm@linux-foundation.org: make damos_sysfs_action_names static]
Closes: https://lore.kernel.org/oe-kbuild-all/202506271655.b8yfEZIT-lkp@intel.com/
Link: https://lkml.kernel.org/r/20250622213759.50930-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: decouple sysfs from core".
DAMON sysfs interface is coupled with core layer. It maintains some of
its keywords arrays be synchronized with matching DAMON core API enums.
It is unnecessary coupling that makes separated changes for different
layers difficult. Decouple the layers by introducing new data structure
for the mappings on DAMON sysfs interface.
This patch (of 5):
Decouple DAMOS sysfs interface from damos_quota_goal_metric. For this,
define and use new sysfs-schemes internal data structure that maps the
user-space keywords and damos_quota_goal_metric, instead of having the
implicit and unflexible array index rule.
Link: https://lkml.kernel.org/r/20250622213759.50930-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250622213759.50930-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
